10 Results
Northtech #NT-555, Overarm Pin Router, 3-3/8" stroke, 3/5 HP, w/ tools, new
RT Machine | Hughesville, PA
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-555
Northtech model NT-555 Overarm Pin Router s: Spindle Motor: available 3 HP single-phase 230V only, or 5 HP three-phase 230V only Spindle Speed: 18,000 RPM for single-phase model, 10,000 and 18,000 RPM for three-phase model Spindle Travel: pneumatic 3-3/8" vertical stroke Forward Tilting Table: 0 to 45-degrees Three ...more
Northtech #NT-750-10, Pneumatic Overarm Router, 10 HP, 8k/16k RPM, 3-3/4" travel, 29-1/2" throat, w/ tools, new
RT Machine | Hughesville, PA
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-750-10
Northtech model NT 750-10 Overarm Pin Router s and : Spindle Motor: 10HP 230V 3Ph Spindle Speeds: (2), 8,000 and 16,000 RPM Spindle Travel: 3-3/4" Chuck to Table: max. 9" Throat Clearance: 29-1/2" Table Size: 36" x 40" Table Travel: 7-1/2" Table Tilt: 45-degrees, front downward Micrometric Table Raise: 1/32" (1mm) per ...more
Onsrud #3025, Inverted Pin, Router, 5 HP, 230 V., 3 Ph, 1994
Carolina Machinery Sales | Monroe, NC
Category: Overarm Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Model: 3025
Year: 1994
The machine has been cleaned, checked and repaired, 5HP, 230V, 3Ph.
Onsrud #W-1124, Overarm Pin Router, 36" x 26" Table, 10000-20000 RPM, 3.5" spindle travel, 24" Throat, 7.5 HP
RT Machine | Hughesville, PA
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Onsrud
Model: W-1124
Onsrud Model 1124 Overarm Pin Router Table Size: 36" x 26" Spindle Speeds: 10,000 - 20,000 RPM Throat Size: 24" Manual Hand-Crank for Table Raise/Lower Spindle Travel: Adjustable from 0" - 3-1/2" Spindle Motor: Approx. 7-1/2 HP Foot Pedal Operation Serial No. 8857 NOTE THAT THERE IS AN ELECTRICAL ISSUE WITH THIS ...more
Onsrud #W-147-BE, Radial Arm Routers, 4' x 8' format, 5 HP, 14700 RPM, 4' x 14' table
Ex-Factory | Charlotte, NC
Category: Overarm Routers
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Onsrud
Model: W-147-BE
Year: 1974
ONSRUD W-147-BE RADIAL ARM ROUTERThis Radial Arm Routers gives you the option of pattern routing operating in a 4' x 8' format. -- Great for all types of pattern routing. 5 HP Boosted to 14,700 RPM by a Brooks Frequency changer. -- All special clampsincluded. -- Router comes with a 4' x 14' Table for ...more
Get email updates for newly added Overarm Routers
An overarm router is a spindle that aligns with a pin opposite the end of the spindle. It is a shaper with the cutting tool above the table. It can be used to copy parts using a pattern, or as a dado machine.
Onsrud #W525, overarm router, s/n 968057-01
FL Sales Inc | Solon, OH
Category: Overarm Routers
Seller: FL Sales Inc
Location: Cleveland, OH
Mfr: Onsrud
Model: W-525
Onsrud type w525 overarm router s/n 968057-01.
Onsrud Inverted Router
Carolina Machinery Sales | Monroe, NC
Category: Overarm Routers
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Onsrud
Onsrud Inverted Router.
SCMI #R9, Overarm Pin Router, 8.85 HP, 230 V., 3ph, 35" x 31" table
RT Machine | Hughesville, PA
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Mfr: Scmi
Model: R9
SCMI Model R9 Overarm Pin Router Main Motor: 8.85 HP, 230/460v, 3ph Table Size: 35" x 31" Foot Pedal Control Manual Hand-Crank for Table Height Reference #: 090607 Serial #: AB/50050 This is a part of a total plant liquidation, Please call for.
JUST ADDED!
Yilmaz #CRM250S, Pneumatic Template Copy Router, 2200 watt, 12000 RPM, 6-8 bar, 230 Volt, 2019
Heavy Wall Consulting | Long Beach, CA
Category: Overarm Routers
Seller: Heavy Wall Consulting
Location: Simi Valley, CA
Mfr: Yilmaz
Model: CRM250S
Year: 2019
The Yilmaz CRM 250S Pneumatic Template Copy Router uses compressed air for clamping and operation, runs on 230V single-phase power, and s a high-speed spindle (up to 12,000 RPM) for clean cuts., Condition, This item is in good working condition., Includes, Yilmaz CRM 250S Pneumatic Template Copy Router.
Evans #2480, Over Arm Router, 3 HP, 12k-21k RPM, 100 psi, 30" x 48" table, new
RT Machine | Hughesville, PA
Category: Overarm Routers
Seller: RT Machine
Location: Hughesville, PA
Model: 2480
Evans Model 2480 Over Arm Router Selected s: Cutting Surface: 30" x 48" Spindle Motor: 3 HP & Variable Speed from 12,000 RPM to 21,000 RPM Air Requirement: 100 PSI Compact heavy duty system for quickly cutting sink holes in countertopsHigh-frequency router is rated for continuous use and cutting solid core ...more
