26 Results
Barr Mullin #Opti-Rip Wondersaw, Computerized Laser Controls
Carolina Machinery Sales | Monroe, NC
Category: Optimizing Cross-Cut Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Barr Mullin
Model: OPTI-RIP
Barr Mullin Wondersaw Optimizer with Computerized Laser Controls, Tichniess: Up to 3", Width: 31", Min cut: 4", Feed height: 34-1/2", Floor Space: Apprx 21' x 15', 480 volt.
Dimter #Opticut-350, optimizing system with scanning, Weinig 4D scanning system
Carolina Machinery Sales | Monroe, NC
Category: Optimizing Cross-Cut Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Dimter
Model: OPTICUT-350
Tisfoon 4D Scanning system (new in 2024), System includes (2) Dimter 350 Optimizing Saws, Infeed system to feed both machines from scanner, Outfeed conveyors with multiple pusher to unload parts.
Friulmac #Dualfeed-2.5, Automatic Double Crosscut saw & Moulder Feeder, 5.36 HP, 3750 RPM, 1000 CFM, spindle 1.2"
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Friulmac
Model: DUALFEED-2.5
Friulmac Model Dualfeed 2.5 Automatic Double Crosscut saw & Moulder Feeder Working Units on each side Trimming Unit: Motor Power: 4kW (5.36HP) Spindle RPM: 3750RPM Spindle Diameter: 30mm Max Blade Diameter: 250mm Adjustments: In/Out: Manual Up/Down: Manual Dust Extraction: 1+1 Dust Ports with 100mm outside ...more
Grecon / Dimter #Opticut-204L, optimizing cutoff system, 1989
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Grecon
Model: OPTICUT-204L
Year: 1999
GRECON/DIMTER OPTICUT 204 L Optimizing Cutoff System: -- For hard or soft wood. -- Left-to-right feed. -- Max. crosscut section 7-3/4" x 1-15/16" to 5-3/4" x 3-1/16". -- Board width cap. 1-1/5" to 7-3/4", Board thickness 3/8" - 3-1/8", Board length 15" to 20'. -- Shortest fixed length 5-3/8", Shortest finger ...more
Holytek #CFS-100, Semi-Optimizing Cut-Off Saw, 1.18" width x 3/8" Work thickness, 18" Saw Blade diameter, 30 mm Spindle diameter, 70 MPM, 10 HP, 3200 RPM, 600 V, 2020
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: CFS-100
Year: 2020
HOLYTEK - CFS-100: Semi-Optimizing Cutoff Saws -- An economical approach to optimized cutting. -- High production! User-friendly operation! -- Provides (3 - 5) times higher production rate than conventional Cutoff Saws. -- Saves over.5% of wood materials due to its high precision cut. -- Machine designed with: HOLYTEK ...more
Get email updates for newly added Optimizing Cross-Cut Saws
Optimizing cross-cut saws are machines used to cut wood to specific lengths with precision, minimizing material waste. Manual models require operator input for each cut, while automated versions use software to optimize cutting patterns for better yield and efficiency. These saws are essential for large-scale production, ensuring accurate cuts and maximizing material usage.
Holytek #S-450, Programmable Automatic Cut-Off Saw, 11.9" L x 1.18" width x 3/8" H min Work Size, 1" Spindle diameter, 18" Saw Blade diameter, 10 HP, 600 V, 2012
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Holytek
Model: S-450
Year: 2012
HOLYTEH - S-450: Programmable Automatic Cutoff Saws -- Machine cuts at a fixed length for various cutting requirements. -- Ideal for finger jointing (for defect) materials and mass material preparation. -- Advanced Servo Motor System; fast processing speed; high stability and cutting accuracy of ± 0.5 mm. -- ...more
Mereen-Johnson #312-DC/SR2, Rip Navigator Tracker, Optimizing, 111 FPM feed, 17' 6" max stock, New
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen Johnson
Model: 312-DC/SR2
Mereen-Johnson Model 312-DC/SR2 Navigator Scout Rip Optimizing S Arranged to Receive 17'-6" Maximum Length Boards from Scissors Lift Manually placed on Board Dealer Arms Individual Boards are Automatically Dealt onto Lateral Chains and Conveyed to a Board Stop Board Stop Queues Boards for Advancement to ...more
Northtech #NT-ADS100A, Defecting Saw Line, 10 HP, TEFC, 2.5 HP, 25-256 FPM, 18" blade, 4000 RPM, 1.125" arbor, new
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Northtech
Model: NT-ADS100A
Northtech Model NT-ADS100A Defecting Saw Line High speed defecting saw Saw: 10HP high efficiency TEFC motor Feed motor: 2kw (2.5HP) Saw arbor speed: Standard: 18" saw blade: 4000RPM Feed speed: 25 - 256FPM Up to 80 cuts/min 1.2m (4') infeed roller table included 1m (3') outfeed table Crayon Marking Defect Saw ...more
Omga #Optima-120-4200-CE, Pushfeed Optimizing & Defecting Cut-Off Saw System, 12" width x 4.94" thick capacity, 18" Blade diameter, 25-30 cuts/min., 2021
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Omga
Model: OPTIMA 120
Year: 2021
OMGA - OPTIMA 120: Pushfeed Optimizing & Defecting Cutoff Saw System 12" Max. width x 4-15/16" thickness; Automatic Crosscutting Saw System. -- For cutting up to 13-3/4' long lumber; saw handles a workpiece down to 15.74" long. -- Rollers at infeed handle rough inbound material with variation in thickness. -- ...more
Omga #Optima-120-4200-CE, Push Feed Optimizing & Defecting Cut-off Saw, 25-35 cuts/min., 12" width x 4.3" thick max Piece Size, 18" diameter Saw Blade, 208 V, 2021
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Omga
Model: OPTIMA 120 4200 CE
Year: 2021
Omga Model Optima 120 4200 CE Push Feed Optimizing and Defecting Cut-off Saw Note: This machine will require a rigger for removal, at the buyer's expense 208v, 7.38 kW, 60 Hz, 3PH Maximum mm: 500 PH Minimum mm: 400 PH Bore mm: 35 mm Maximum piece thickness: 4-5/16" Maximum piece width: 12" Maximum infeed length: ...more
Paul #C14-Scan-II, Optimizing Cross-Cut Saw w/Wood Scanning System, 6'-20' L x 1"-2.5" thick Timber Size, 36"-240" Cut length, 23.6" Saw Blade, 480 V
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Paul
Model: C14 SCAN II
Paul Optimizing Crosscut Saw C14 Scan II w/ Paul Wood Scanning System Optimizing Crosscut Saw and Scanner for Cedar, Hemlock, Pine, and Fir Timber Length (Min/Max): 6ft-20ft Timber Thickness (Min/Max): 1"/2-1/2" Min/Max Timber Cross-section: (2"x5/8")/(12"x2-1/2") Min/Max Cut Length: 36"/240" Scanner Working Height: ...more
RDN #C420, Cross Cut Saw, 14" diameter blade, 42" centerline, product & length counter, 460 V., 2006
Arlington Machinery | Lake Zurich, IL
Category: Optimizing Cross-Cut Saws
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Rdn
Model: C420
Year: 2006
Used 4" x 20" RDN Cross Cut Saw, Model C420 14" Blade Diameter, 42" Center line Height, With Leveling Screws Product Counter, Length Counter 2 HP Baldor Motor 460/3/60, 4 Amps S/N: 51447 New In 2006 Has 10 Pin Cable For Encoder Does Not Include Encoder Of Encoder Wheel Approximate Dimensions: 60" L x 55" W x 75" H.
Salvador #Super-Angle-600, optimizing chop saw, 2021
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Salvador
Model: SUPER-ANGLE-600
Year: 2021
SALVADOR - SUPERANGLE 600,.Pusher Chop Saw. Provides complete chop to length & optimization of wood strips, including the elimination of defects. -- Infeed is made of a Heavy-Duty steel frame; working height: 1,000 mm (39") from floor level; safety is provided by a light curtain. -- Pusher slides on ...more
Salvador #Super-Push-250, optimizing push feed cutoff saw, 2021
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Salvador
Model: SUPER-PUSH-250
Year: 2021
2021 SALVADOR SUPER PUSH 250 ACCURATE EDITIONThis is a very late model and low hours optimizing cut off saw that includes the ACCURATE package as well as a printer to label your parts. The Salvador super. Push 250 is a fast Robust Push Feeding Optimizing Crosscut Solution designed for high performance.The Super Push ...more
Salvamac #Salvapush-2000, Optimizing Saw, 20" blade, 240/480 V., 3ph, 1.64'-13.45' board L, 296 FPM feed, 2024
Carolina Machinery Sales | Monroe, NC
Category: Optimizing Cross-Cut Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Salvamac
Model: SALVAPUSH-2000
Year: 2024
Salvamac Salvapush 2000-4100 Optimizing/Defect Saw, Max. board length: 4100 mm (13.45 ft) Min. board length 500 mm (1.64 ft), min. board thickness 12 mm, Blade : 500mm (20”)., Cutting capacity:, Min. 30x12 mm (1.18′x0.51′), Max. 270x120 mm (10.62”x4.72”) / 300x95 mm ...more
Stromab #WS1, Optimizing Cut Off Saw, Thru feed system, 2018
Carolina Machinery Sales | Monroe, NC
Category: Optimizing Cross-Cut Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Stromab
Model: WS1
Year: 2018
Stromab WS1 Cutoff Saw, Thru feed system with defecting o cutting preset sizes - NO optimizing!, Operator can mark the board with crayon., Demo unit with low hours!.
Tigerstop #TSS-1000, Automated Optimizing Push Feed Saw, 6" x 6" / 1" x 16" Cutting capacity, 20' Infeed & Outfeed Tables, 10 HP, 2021
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Tigerstop
Model: TSS 1000
Year: 2021
TigerStop Model TSS 1000 Automated Optimizing Push Feed Saw Designed for Cutting Wood or Plastic Cutting Capacity: Adjustable Cutting Envelope 6" x 6" / 1" x 16" or 6" OD Tube & Pipe Dynamic Optimization Software Crayon Defect Marking Saw Saw Motor 10HP 3PH Infeed Table 20' with Pusher Outfeed Table 20' ...more
Tisfoon, Optimizing Wood Scanner Defect Chop Saw and Sorting Line, 2" x 8" Cut capacity, 16'/11' Conveyors, 460 V, 2020
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Tisfoon
Year: 2020
Tisfoon Optimizing Wood Scanner Defect Chop Saw and Sorting Line - Perfect condition six part automated scanning / defect optimizing chopsaw with cutlist and sorting line. Line made in USA. Excellent tech and machine support based out of North Carolina. This machine was used lightly in a furniture production facility ...more
Tisfoon, computer controlled optimizing cut off saw, 2020
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Mfr: Tisfoon
Year: 2020
TISFOON - USA Optimizing Wood Scanner Defect Chop Saw & Sorting Line -- Perfect condition 6-part automated Scanning / defect / optimizing Chop Saw with: Cut List & Sorting Line. Line made in USA; Excellent tech & machine support based out of North Carolina. -- TISFOON is an independent machine & ...more
Ultimizers #Duo-Drive, Optimizing Cut-off Saw, w/ Ulti-Vision Defect Scanner & Kicker Station, 1200 FPM, 10 HP arbor, 480 V.
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ultimizers
Model: DUO-DRIVE
Ultimizers Model Duo Drive, Left Hand Optimizing Cut Off Saw with Multi-Vision Scanner Capacity: Width Range 1-1/2" to 6", Input Length Range 2' to 20', Material Thickness 3/4" to 6/4" Ultimizers Ulti-Vision Top and Bottom Scanner Includes for Each Face (1) IVP E-50 Scan Camera for Defecting and Profiling, (2) ...more
Ultimizers #Ulti-Vision, S4S Scanner w/Duo-Drive 500GB High Speed Saw, 7.5" width x 20' L max Material Size, 8" width Smart Belt, 100-250 FPM, 2014
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Ultimizers
Model: ULTI-VISION S4S
Year: 2014
Ultimizers Vision Based Optimizing Line for Material up to 7.5" Wide and up to 20' Long This is an S-4-S Scanner with 64Bit Software ULTIMIERS LATERAL FEEDER DECK With Two (2) Top and Bottom Pinch rolls (7) chains approximately 18 feet long and one pinstop set to help control fence pressure backlog The bottom ...more
Weinig/Dimter #Opticut-450, Optimizing Cut Off Saw, 12" Width capacity, 6.3 m Full Optimization, 16' Marking Station, 33' Sorting Line, 984 FPM, 480 V, 2008
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Model: OPTICUT-450
Year: 2008
Weinig Dimter Model Opticut 450 Optimizing Cut Off Saw Width Capacity 12" Full Optimizing up to 6.3m (20.6’) Variable Speed Feed up to 300 m/min (984 FPM) Length Measuring Unit w/ Flourescent Camera for Three Grades Upgraded with Automatic Laser Width Measuring System Driven 16’ Marking Station Integrated ...more
Weinig, Optisaw System w/Luxscan Combiscan & (3) Opticut 450 Quantum, 4'-12' L x 1.5"-6.5" width x 1"-2" thick Incoming Size capacity, 2017
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Weinig
Year: 2017
Weinig/Dimter Optisaw System with Luxscan Combiscan and 3 Opticut 450 Quantum This Line was Designed by Weinig to process up to 67 boards per minute The Example Presents is 8’ Long Material 3” x 1” with 6 Cuts Per Board This Line will Cut Multiple Widths with a Separate Cutting Bill for Each Width ...more
Ultimizers #Duo-Drive, Left Hand Optimizing Cut Off Saw, 1200 FPM,
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Model: DUO-DRIVE
Ultimizers Model Duo Drive, Left Hand Optimizing Cut Off Saw Top And Bottom Belt Drive System To Grip Material And Resist Slippage Crayon Mark Reader with "Smart-Belt" 19' Long X 8" Wide The Smart Belt Infeed System Works In Conjunction With The Computer Controller To Provide Consistent And Controlled Infeed To ...more
Ultimizers #S-Transfer, Lateral Infeed, for Optimizing Saw
RT Machine | Hughesville, PA
Category: Optimizing Cross-Cut Saws
Seller: RT Machine
Location: Hughesville, PA
Model: S-TRANSFER
Ultimizers Lateral Infeed for Optimizing Saw Take away roll case and 90 degree feeder using a chain driven heavy duty roll case to take lumber from one Machine and a set of sweep chains to side transfer the lumber to the first staging station still on the roll case, and then again to the 90 degree chain deck feeder ...more
Omga #T-521-SNC, optimizing cross-cut saw, 10' long lumber cutting, single or multiple pieces stacked, 20" diameter blade, 12-5/8" width x 5-1/2" thick cut, 7 HP, 3200 RPM, 2026, new
Ex-Factory | Charlotte, NC
Category: Optimizing Cross-Cut Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: T-521-SNC
Year: 2026
OMGA T 521 SNC Automatic Crosscutting Saw System (10').Suitable for automatically cutting up to 10' long lumber (longer lengths available on request); cuts single or multiple pieces stacked; CNC Programmable Pusher to accurately position lumber to selected lengths.OMGA T 521 ST Up-cutting Cutoff Saw with ...more
