44 Results
5 Ton, Hydraulic die tryout press, 4-post, 34" stroke, 54" x24" bed, single lever, 10 HP, #75295
Yoder Machinery Sales | Holland, OH
Category: Die Tryout and Spotting Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
CAPACITY. 5 TON, AREA OF BED & RAM. 54" X 24", DISTANCE BETWEEN THE POST. 45", DISTANCE BETWEEN POST F/B. 16", DISTANCE BETWEEN UPRIGHTS. 12", STROKE. 34, OPEN HEIGHT. 40", CLOSED HEIGHT. 6", FLOOR TO BED. 33", BED PLATE THICKNESS. 2", SINGLE LEVER. YES, MOTOR. 10 HORSEPOWER.
20-100 Ton, Sanki Seiko #SDP-1612-100, hydraulic die spottong press, 35.4" stroke, 55.1" DL, 1985
Perfection Global | Elk Grove Village, IL
Category: Die Tryout and Spotting Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Seiko
Model: SDP-1612-100
Year: 1985
Tonnage Capacity: 20 Ton - 100 TonRam Stroke: 35.4"Daylight: 55.1"Bed Area (L-R x F-B): 62.9” x 47.2”Lifting Stroke: 60 TonMax. Table Load: 8 TonApproach Speed: 106 IPMPressing Speed: 18 IPMReturn Speed: 173 IPM, Flip Down RamMoving Table Front to BackEjector DeviceResin Injection Cylinder.
JUST ADDED!
30 Ton, Millutensil #BV-30E, die spotting press, 1999
Star Equipment Co., Inc. | Utica, MI
Category: Die Tryout and Spotting Presses
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Millutensil
Model: BV-30E
Year: 1999
spotting press millutensil in very good condition. delivered ex works, free on truck, 1999 MILLUTENSIL BV 30E.
33 Ton, Abeseiki #CDS-2015-30S, 70.86" stroke,sliding bed hydraulic,PB manual controls, 1988
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Abeseiki
Model: CDS-2015-30S
Year: 1988
33 Ton Abeseiki Sliding Bed Hydraulic Die Spotting Press, Model: CDS-2015-30S, New June 1988, Serial Number: 8400606, PB Manual Controls, Sliding Bed (Rolling Bolster / Rail Access.), RAM With Booking (Flips Downward), T-Slot Ram, T-Slot Bolster, FACTORY :, Press Capacity: 33 Ton (30 mt), Pull-out Capacity: 14.33 Ton ...more
40 Ton, Reis #TUS-90, die tryout & spotting press, 24" stroke, 40.5"DL, 48" x36"bed, 1974
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Reis
Model: TUS-90
Year: 1974
ORDER 40, 40 TON, 24" STROKE, 48" X 36" RAM, 48" X 36" SLIDE OUT BED, 40.5" DAYLIGHT, 36.5" BETWEEN POST, FLIP DOWN UPPER PLATTEN (BOOKING), HYDRUALIC TILT ON ROLL OUT TABLE, UP ACTING, 1974.
Get email updates for newly added Die Tryout and Spotting Presses
Die Tryout and Spotting Presses (also known as trial presses) are machines used to test and adjust stamping dies before full-scale production. Commonly used in industries like automotive and metalworking, they help ensure that dies produce the desired part shapes, fit, and quality. These presses are essential for making fine adjustments to dies and ensuring they perform efficiently in high-volume production.
JUST ADDED!
50 Ton, Herman Schwabe #DG-HD, Up-Acting Die Press, 38" x 38" bed, 6" stroke, 10 HP
Mullin Machinery | Farmingdale, NJ
Category: Die Tryout and Spotting Presses
Seller: Mullin Machinery
Location: Farmingdale, NJ
Mfr: Herman Schwabe
Model: DG-HD
Product Herman Schwabe 50 Ton Model DG-HD Up-Acting Die PressBed Area- 38″ x 38″, Maximum Stroke- 6″, Electric- 10 hp 230/460 3ph.
50 Ton, Reis #TUS-80-OK-50, mold spotting & try-out press, 39.37" stroke, 41.33" daylight, 1996
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-80-OK-50
Year: 1996
Used 1996 REIS TUS 80 OK-50, 50 Ton Hydraulic Spotting Press. s 43in L-R x 31in F-B bed, 43.3in stroke, 180 swing down ram, injection unit, and digital positioning. Hours: 1059. Dimensions: 135in L-R x 82in F-B; Weight: 17,636 lbs., New: 1996, Nominal Force: 50.98 US Ton (500 KN @ 200 bar), Max. Retraction Force: ...more
50 Ton, Reis #TUS125-OK-50, hydraulic die spotting & try-out press, 53" stroke, 53" DL, 1991
Perfection Global | Elk Grove Village, IL
Category: Die Tryout and Spotting Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Reis
Model: TUS125-OK-50
Year: 1991
Max. Pressing Force: 56 TonMax. Retraction Force: 28 TonUpper & Lower Clamping Platen: 48" x 60"Max. Mold Weight: 22,050 lb.Load of Upper Platen: 8,820 lb.Daylight 53"Stroke 53"Rapid Speed: 118 IPMPressing Speed: 19 IPMOpening Speed: 113 IPMMotor Capacity: 10 HP, Reis Control CenterAllen Bradley SLC 5/04 CPUSlide ...more
50 Ton, Verson #D2-50-132-84DS, Hydraulic Spotting Press, 48" stroke, 36" Shut Height, 132" x 84" bed, (2 available)
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Verson
Model: D2-50-132-84DS
Model: D2-50-132-84, Tonnage: 50, Stroke: 48", Shut Height: 36", Bed Size: 132 x 84", 2 available., Machine Type.Presses, Die Tryout & Spotting Manufacturer.VERSON Model.D2-50-132-84 Year.N/A Condition.Good.
75 Ton, AMMI, hydraulic press, 34" stroke, 68.5" daylight, 81" x42" bed, tilt down arm, tilt up bolster, floor standing, hyd tank
Presses for Industry | Detroit, MI
Category: Die Tryout and Spotting Presses
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Ammi
Model: AMMI
PRELIMINARY, AMMI HYDRAULIC PRESS WITH TILT DOWN RAM & TILT UP BOLSTER, FLOOR STANDING, 75 TON CAPACITY, 34" STROKE, 68-1/2" DAYLIGHT, 81" LR X 41-3/4" FB BOLSTER, 81" LR X 41-3/4" FB RAM, 83-1/2" OPENING BETWEEN SIDES, CONTROL CONSOLE, MOTOR & ELECTRICS, HYDRAULIC TANK, LIGHT CURTAINS, 45 DEGREE TILT DOWN ...more
90 Ton, Reis #TUS90-OK, hydraulic spotting press, 35.44" x 50.40"capacity
Nationwide Machinery Sales | Troy, MI
Category: Die Tryout and Spotting Presses
Seller: Nationwide Machinery Sales
Location: Troy, MI
Mfr: Reis
Model: TUS90 OK
90 Ton Reis Hydraulic Spotting Press, Model TUS90 OK, - Capacity: 35.44" x 50.40", - Working capacity (floor plate size): 47.25" x 35.44", - Column distance: 36.62", - Max. distance between plates: 40.75", - Max weight on lower plate: 15,432 lbs., - Max weight on upper plate: 7,716 lbs., - Max. closing strength: 40kN ...more
90 Ton, Reis #TUS90-OK, hydraulic 4 Post spotting press, 40" stroke, 40.75" daylight, 47.25" x 35.44" bed, #11363
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS90-OK
For sale: Used 90 Ton Reis TUS 90 OK Hydraulic 4 Post Spotting Press. s a 40" stroke, 40.75" daylight, and a 47.25" x 35.44" bed area. Supports max weights of 15,432# on lower and 7,716# on upper plate. Ideal for heavy-duty tasks., Capacity: 90 Ton, Stroke: 40, Daylight: 40.75, Bed Area: 47.25 x 35.44, Max weight on ...more
JUST ADDED!
100 Ton Cincinnati Inc #Electroshape, die spotting press, 36" stroke, 2000
Star Equipment Co., Inc. | Utica, MI
Category: Die Tryout and Spotting Presses
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Cincinnati
Model: ELECTROSHAPE
Year: 2000
Optimize your production with this used 100 Ton Cincinnati Electroshape Spotting Press, Model 2000. Featuring a 36" stroke, it's ideal for die tryout and spotting tasks. Perfect for enhancing efficiency in your operations., Tonnage: 100 ounces, Stroke: 36 inches.
100 Ton, Dake #18-255, hydraulic 4-post spotting press, 36" stroke
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Dake
Model: 18-255
SERIAL.: 14985, MODLE.: 18-255, TONNAGE.: 100, STROKE.: 36", OPEN HEIGHT.: 60", DAYLIGHT.:, PRESS SPEED.: 17 IPM, PRESS RETURN SPEED.: 38 IPM, Machine Type.Presses, Die Tryout & Spotting Manufacturer.DAKE Model.18-255 Year.N/A Condition.Used.
100 Ton, Dake #918-527, Hydraulic Spotting Press, 42" stroke, 60" open height, 18" closed height
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Dake
Model: 918-527
SERIAL.: 527, MODEL.: 918-527, TONNAGE.: 100, STROKE.: 42", OPEN-HEIGHT.: 60", CLOSED HEIGHT.: 18", PRESSING SPEED:, APPROACH.: 85 I.P.M, PRESSING.: 0 TO 17 I.P.M, BREAKAWAY.: 0 TO 38 I.P.M, RAPID RETURN.: 194 I.P.M, BED SIZE.: 84" X 48", BETWEEN POST.: 60" X 60", ROLLING BOLSTER. DOES NOT NEED HOOKED UP TO RUN ...more
100 Ton, Millutensil #MIL-143, Spotting Press, 1400mm x 1200mm platen, 1997
Revelation Machinery | Chicago, IL
Category: Die Tryout and Spotting Presses
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Millutensil
Model: MIL-143
Year: 1997
Make: Millutensil, Model: MIL 143, Year: 1997, Machine Location: Michigan, Max Clamping Force: 100 Ton, Platen: 1400mm x 1200mm, Max Opening Force: 25 Ton, Max Load Capacity on Lower Plate: 10,000 kg, Max Load Capacity on Upper Plate: 5,000 kg.
100 Ton, Reis #TUS-160, hydraulic mold spotting & tryout press, 4-post, 39.37" stroke, 41.33"open, 61" x71"bed, sliding table, swing down platen, 1998
Machinery Central | Louisville, KY
Category: Die Tryout and Spotting Presses
Seller: Machinery Central
Location: Louisville, KY
Mfr: Reis
Model: TUS-160
Year: 1998
, REIS Model TUS 160 hydraulic mold spotting and tryout press. 100-ton capacity, 4-post design, 61" W x 71" L bed area, 39.37" stroke, and 41.33" opening. Includes swing down platen and sliding table for enhanced versatility., Spec Sheet:, 100 TON REIS MODEL #TUS 160 HYDRAULIC MOLD SPOTTING AND TRYOUT PRESS, SERIAL. ...more
100 Ton, Reis #TUS-160, hydraulic mold spotting & tryout press, 4-post, 39.37" stroke, 41.33" open, 61" W x 71" L bed, 1998
Yoder Brothers Machinery | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Reis
Model: TUS-160
Year: 1998
SERIAL. 319300, MODEL. TUS 160, YEAR. 1998, CAPACITY. 100 TONS, 4-POST PRESS. YES, AREA OF BED. 61" W x 71" L, STROKE. 39.37", OPENING. 41.33", 4 -POST HYDRAULIC SPOTTING PRESS. YES, SWING DOWN PLATEN. YES, SLIDING TABLE. YES.
100 Ton, Reis #TUS-160, Hydraulic Mold Spotting & Tryout Press, 61" x 71" bed, 39.4" stroke, 41.3" daylight, 1998
Aucto | San Francisco, CA
Category: Die Tryout and Spotting Presses
Seller: Aucto
Location: Louisville, KY
Mfr: Reis
Model: TUS-160
Year: 1998
THIS REIS MODEL TUS 160 HYDRAULIC MOLD SPOTTING AND TRYOUT PRESS, MANUFACTURED IN 1998, IS A 4-POST DESIGN WITH A CAPACITY OF 100 TONS. THE MACHINE S AN AREA OF BED MEASURING 61" W X 71" L. ITS OPERATIONAL DIMENSIONS INCLUDE A STROKE OF 39.37" AND AN OPENING OF 41.33". THE PRESS IS A 4-POST ...more
JUST ADDED!
100 Ton, Reis #TUS-160-OK-100, Die Tryout & Spotting Press, 94.5" stroke, 1992
Star Equipment Co., Inc. | Utica, MI
Category: Die Tryout and Spotting Presses
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Reis
Model: TUS-160-OK-100
Year: 1992
1992 REIS TUS-160-OK-100, Tonnage. 110 T, Stroke. 94.5".
100 Ton, Reis #TUS-160S-100, hydraulic spotting press, 90.55"DL, 63.78"btwn columns
Vander Ziel Machinery Sales | Alto, MI
Category: Die Tryout and Spotting Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Reis
Model: TUS-160S-100
Reis 100 Ton Hydraulic Spotting Press, Model TUS-160S-100, Asset # 17431, Serial # 03.189.00, Daylight Between Columns 63.78″, Daylight 90.55″, Clamping Surface 86.6″ x 61″, T Slot Dimensions, 25.59″ x.866″, Ram Force 100 Tons, Retraction Force 45 Tons, Swivel Platen Capacity 6 ...more
100 Ton, Sanki #SPD1310-100TD, hydraulic spotting press, 38.4" stroke, 41.2" DL, 10 HP, 51" x39" bed, 1993
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Sanki
Model: SPD1310-100TD
Year: 1993
Used 100 Ton Sanki Hydraulic Spotting Press, model SPD1310-100TD, from 1993. Key include 100T capacity, 51"x39" bed, 38.4" stroke, and 41.2" daylight opening. slide out bolster, wax injection, and light curtains. 480/3/60 voltage., Capacity: 100 Ton, Bed & Ram Area: 51 x 39, Stroke: 38.4, Daylight Opening: 41.2 ...more
100 Ton, Sanki #SDP1310-100TD, hydraulic die spotting press, 51" x39" platen, 38.4" stroke, 41.2" DL, front & rear light safety curtains, one shot way lube
Alternative Machine Tool Inc | Dousman, WI
Category: Die Tryout and Spotting Presses
Seller: Alternative Machine Tool Inc
Location: Dousman, WI
Model: SDP1310-100TD
Platen Size: 51.0” x 39.0” Pressing Capacity: 100 Ton Maximum Mold Weight: 12,000 lbs Upper Mold Half Maximum Weight: 6,000 lbs Stroke w/ Bolsters Installed: 38.4” Daylight w/ Bolsters Installed: 41.2” Hyd. Motor Horsepower: 10 Hp Mold Top Half Inversion: +/- 180° Voltage: 480/3/60 Floor ...more
100 Ton, Sanki #SPD1310-100TD, hydraulic spotting press, 38.4" stroke, 41.2" daylight, 51" x 39" bed
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Model: SPD1310-100TD
100 Ton Maximum Capacity, 38.4" Stroke, 41.2 Maximum Daylight, 51" X 39" Bed And Ram Area, 12,000LBS Maximum Mold Weight Table, 6,000 LBS Weight Upper Platen, 10 HP, 480 /3/60, Slide Out Bolster, Flip Out Ram full 180, Upper and Lower Bolster Plates Drilled And Tapped 3/4" -10 On 2" Centers, Wax Injection, Light ...more
100 Ton, Hydraulic Die Spotting Press, 40" stroke, 42.5" daylight, 34" LR x 50" front back planten
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Used 100 Ton Hydraulic Die Spotting Press by HYDRAULIC. s a 34 x 50 bed, 40 stroke, 42.5 daylight opening, and 30 HP hydraulic unit. Includes lower ejector, rollout shuttle table, and console control station. 3,000 PSI max., All Subject To Verification, Approximate Tonnage: 100, Approximate Stroke: 40, Approximate ...more
100 Ton, Hydraulic Die Tryout & Spotting Press, 42.5" daylight, 34" x50" platens, 3000 psi clamping pressure, shuttle table
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Capacity, Approx.: 100 Ton, Clamping Pressure, Max.: 3000 PSI, Daylight: 42-1/2", Between Posts: 46" x 28", Platens: 34" x 50", Booking On Upper Platen, Shuttle Table, Control Console, MOTOR DATA: 30 HP Hydraulic Power Unit.
110 Ton, Millutensil #MIL-162, die tryout & spotting press, 39.4" stroke 24 HP, Siemens PLC, 1995
Perfection Global | Elk Grove Village, IL
Category: Die Tryout and Spotting Presses
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Millutensil
Model: MIL-162
Year: 1995
Tonnage Capacity: 110 TonStroke Length: 39.4"Daylight: 55.5"Upper Platen (L x R): 63" x 53"Column Area (L x H): 67" x 54"Moving Bolster: 63" x 49.5"Max. Close Force: ~224,800 lbfMax. Open Force: ~33,700 lbfMax. Upper Load: 17,600 lb.Max. Lower Load: 35270 lb.Plate Rotation: Up To 180°Motor: 24 HPSpeeds Quick: ...more
110 Ton, Millutensil #MIL-162, hydraulic die tryout/spotting press, 62.99" L x 51.18" width working area, 1995
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Millutensil
Model: MIL-162
Year: 1995
Year of Mfg: 1995 Capacity: 110 Tons Plate Working Area: 62.99" L x 51.18" W Longitudinal Distance Between Columns: 67.32" Horizontal Distance Between Columns: 53.93" Maximum Load On Upper Plate: 17,636 lbs. Maximum Load On Lower Plate: 35,732 lbs. Lower Working Surface Clearance above Flood Line: 24.01" Hydraulic ...more
110 Ton, Reis #TUS-160OK-100, 4 post hydraulic spotting press, 71" x61" bolster, 1991
Vander Ziel Machinery Sales | Alto, MI
Category: Die Tryout and Spotting Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Reis
Model: TUS-160OK-100
Year: 1991
Reis 110 Ton 4-Post Hydraulic Spotting Press, Model TUS160 0K-100, 03.141.00, Asset #15663, Year: 1991, 71″ x 61″ Bolster, Sliding Bolster, Plate Walk Around Platform, Control Station, Hold-Downs, Machine Weight: 2.2 Tons, Verified Overall Height 220″, Machine ID: 1308874.
112 Ton, Amino #DSP-100Y, hydraulic down acting spotting press, 67" stroke, 87" DL, 20" Shut Height, 2008
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Amino
Model: DSP-100Y
Year: 2008
Used AMINO #DSP 100Y Hydraulic Spotting Press, 2008, 112 Ton capacity, 118" L-R x 79" F-B bed, 67" stroke, 87" daylight, Mitsubishi controls, T-slotted bolster, safety s. Approx. weight 132,000 lbs., Capacity: 112 Ton, Lifting Capacity: 50 Ton, Maximum Die weight: 20 Ton, Maximum Upper Die weight: 10 Ton, Stroke 67 ...more
112 Ton, Reis #TUS-125-OK, hydraulic die spotting press, 53" stroke, 53" DL, 60" x 48" bed, flip out ram, slide out bolster, 1984, #11609
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-125-OK
Year: 1984
Used 112 Ton Reis Hydraulic Die Spotting Press, Model TUS 125-OK, 1984. s 112-Ton capacity, 60"x48" bed, 53" stroke, slide out bolster, and flip out ram. Estimated weight 28,000 lbs; dimensions 10'6 x 8'6 x 15'6. subject to verification., subject to verification, Model: TUS 125-OK, Serial Number: ...more
112 Ton, Reis #TUS-1250K, 4-post spotting press, 53" stroke, 53" Shut Height, 60" x48" table
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Reis
Model: TUS-1250K
53" STROKE, 53" DAYLIGHT, 60" X 48" TABLE, FLIP OUT UPPER PLATTEN, SLIDE OUT BOLSTER, T SLOTS RAM AND BOLSTER, 4 POST, 1984, Estimated Weight: 28,000 lbs Approximate Overall Dimensions: 10’6” L-R x 8.6” F-B x 15’ High.
125 Ton, Reis #TUS125OK-100, spotting press, 59" x47" bed & ram area, 1981
Yoder Machinery Sales | Holland, OH
Category: Die Tryout and Spotting Presses
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Reis
Model: TUS125OK-100
Year: 1981
SERIAL. 0301400, MODEL. TUS125OK-100, YEAR NEW. 1981, CAPACITY. 125 TON, AREA OF BED & RAM. 59" x 47", DISTANCE BETWEEN THE POST., DISTANCE BETWEEN POST F/B., DISTANCE BETWEEN UPRIGHTS., STROKE., OPEN HEIGHT., CLOSED HEIGHT., FLOOR TO BED., BED PLATE THICKNESS., SINGLE LEVER., MOTOR..
150 Ton, Dake #18-467, 4-post downacting hydraulic spotting press, 24" stroke, 60" shut height
G-2000 | Toledo, OH
Category: Die Tryout and Spotting Presses
Seller: G-2000
Location: Toledo, OH
Mfr: Dake
Model: 18-467
SERIAL. 166827, MODEL. 18-467, YEAR. 1973, CAPACITY. 150 TONS, NUMBER OF POSTS. 4, RAM SIZE. 116" X 52", BOLSTER SIZE. 116" X 72", ROLL OUT BOLSTER. YES, DISTANCE BETWEEN POSTS. 55" X 114", SHUT HEIGHT. 60", STROKE. 24", TOP MOUNTED HYDRAULIC UNIT. YES, Machine Type.Presses, Die Tryout & Spotting Manufacturer.DAKE ...more
JUST ADDED!
150 Ton, Windsor, Mold & Die Testing Press, 4-post hydraullic press, 39-1/2" stroke, 39"-78" opening
Maquinaria Chicago | Nuevo Leon, Mexico
Category: Die Tryout and Spotting Presses
Seller: Maquinaria Chicago
Location: Ramos Arizpe, Mexico
Mfr: Windsor
Folio: MV242346, WINDSOR, Try-Out Press (Mold and Die Testing Press), 4-Post Hydraulic Press, Capacity: 150 Tons, Maximum Mold Size: 48" x 74", Country of Origin: CANADA, Table: 37" x 51" x 24", Stroke: 39 1/2", Maximum Opening: 78", Minimum Opening: 39", Die Testing Press, Die and Die Testing Press, Die and Mold ...more
180 Ton, Reis #TUS-OK-200, spotting press, 60" stroke, 104" DL, 76.75" x 86.75" bed, 1988
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Reis
Model: TUS-OK-200
Year: 1988
60" STROKE, 104" DAYLIGHT, 76.75" X 86.75" BED, 74" X 53" BETWEEN POST, HY-PRESSURE 200 BAR, PN PRESSURE 5 BAR, ROLLING BOLSTER, 1988, PRESSURE 2000 KN, 440 V, 84000 LBS APROX..
220 Ton, Reis #TUS-160OK, 4 post spotting press, 60" x72" x63" bed, tilt table, 1991
Vander Ziel Machinery Sales | Alto, MI
Category: Die Tryout and Spotting Presses
Seller: Vander Ziel Machinery Sales
Location: Alto, MI
Mfr: Reis
Model: TUS-160OK
Year: 1991
Reis 220 Ton Four Post Spotting Press, Model TUS160-OK, Bed Size 60″ x 72″ x 63″, Asset #16010, Table Tilts, Upper Platen Roll Out, Verified Overall Height 226″.
224 Ton, Reis #TUS-180 OK-200, 106" stroke, 118" daylight, 71" x 98" table, 1994
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Reis
Model: TUS-180
Year: 1994
Serial#04.023.00 Capacity: 224 Ton Table Size: 71" lr x 98" fb Swivel Platen Size: 71’ lr x 98” fb Stroke: 106” Dayllight Opening: 118” Distance Between Columns: 74” lr Table Capacity: 67,442 pound force Swivel Platen Capacity; 26,977 pound force Oil Reservoir Capacity: 153 Gallons Motor: ...more
224 Ton, Reis #TUS-180 OK-200, 4 post hydraulic spotting press, tilt down arm, 106" stroke, 118" daylight, 71" x98" table, 1994
Presses for Industry | Detroit, MI
Category: Die Tryout and Spotting Presses
Seller: Presses for Industry
Location: Detroit, MI
Mfr: Reis
Model: TUS-180
Year: 1994
Preliminary, Reis 4 Post Hydraulic Spotting Press with Roll Out Table & Tilt Down Ram, Model: TUS 180 OK-200, Year: 1994, 224 Ton Capacity, 106" Stroke, 118" Daylight, 71" LR x 98" FB Table, 71" LR x 98" FB Ram Platen (Tilt Down), 74" LR Opening Between Columns, 67,442 lbs Table Capacity, 26,977 lbs Slide Platen ...more
224 Ton, Reis #TUS-180-OK-200, hydraulic 4-post spotting press, 71" stroke, 98" DL, 71" x 98" bed, 1994
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Die Tryout and Spotting Presses
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Reis
Model: TUS-180-OK-200
Year: 1994
Used 224 Ton Reis Hydraulic 4 Post Spotting Press, Model TUS-180 OK-200. Year: 1994. Table: 71"x98", Stroke: 106", Daylight: 118", 480V/3ph. controls, top hydraulics, tilt ram, and roll-out bolster., Serial#04.023.00, Capacity: 224 Ton, Table Size: 71" lr x 98" fb, Swivel Platen Size: 71 lr x 98 fb, Stroke: 106 ...more
JUST ADDED!
300 Ton Dake #300, hydraulic spotting press, 60" x 108" bed
Star Equipment Co., Inc. | Utica, MI
Category: Die Tryout and Spotting Presses
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Dake
Model: 300
Used 300 Ton Dake Spotting Press by DAKE available. Hydraulic press, 60" x 108" bed, model 300. Ideal for heavy-duty applications. Robust and dependable equipment for precision tasks. Contact for more., Tonnage: 300 ounces, Bed Width: 60 inches, Bed Length: 108 inches, CNC Control: no.
350 Ton, (175 Ton with current pump), 84" x 72", 100" DL, 60" stroke, 30 HP, 25' tall, #1941
Icon Industries, Inc | Grand Rapids, MI
Category: Die Tryout and Spotting Presses
Seller: Icon Industries, Inc
Location: Grand Rapids, MI
PRESS WAS SET UP WITH AN 84" X 48" X 3" T-SLOTTED PLATED ATTACHED TO THE SLIDE AND A 78" X 40" X 3" T-SLOTTED PLATE ON THE BED WHICH COULD BE MOVED IN AND OUT (WOULD REQUIRE SOME WORK TO MAKE SLIDE-OUT BED FUNCTIONAL). THE OVERALL BED SIZE IS 100" L TO R; THE DISTANCE FRONT TO BACK BETWEEN THE POSTS IS 54". NOMINAL ...more
Hydra-Tech Systems #HP60V10HP-PVP48, spotting press, Allen Bradley Panelview Control
Nationwide Machinery Sales | Troy, MI
Category: Die Tryout and Spotting Presses
Seller: Nationwide Machinery Sales
Location: Troy, MI
Mfr: Hydra-Tech
Model: HP60V10HP-PVP48
Hydra-Tech Systems Spotting Press, Distance between posts: 28-1/2" x 36-1/2", Allen Bradley Panelview Controller.
Reis #TUS-180-OK-200, die tryout & spotting press, 60" stroke, 104" DL, 76.75"x86.75"bed, 1988
D & D Industries Inc | Monclova, OH
Category: Die Tryout and Spotting Presses
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Reis
Model: TUS-180-OK-200
Year: 1988
60" STROKE, 104" DAYLIGHT, 76.75" X 86.75" BED, 74" X 53" BETWEEN POST, HY PRESSURE 200 BAR, PN PRESSURE 5 BAR, ROLLING BOLSTER, T SLOTTED RAM AND BOLSTER, 1988, PRESSURE 2000 KN, 440 V, 84,000 LBS APROX.
