51 - 100 of 256 listings
EuroTech #Elite-735SL, CNC turning center, 22.8" swing, 2.7" bar, 12.6" dia., 20.08" lgth, A2-6, Fanuc 18i-TB, C Axis, live tool, sub spindle, LNS Super Hydrobar bar feeder, 2003
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Eurotech
Model: ELITE-735SL
Year: 2003
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, Collet Chuck On Main ...more
Eurotech #Elite-B750-Sly-Stallion, CNC turning center, 26.8"/19.7" swing, 21" chuck, 3.7"/3.9" bar, 2016
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Eurotech
Model: ELITE-B750-SLY-STALLION
Year: 2016
Machining Capacity, Bar capacity 3.7/3.9, Chuck diameter 21.7, Max length between spindle faces 30.1, Max swing over diameter 26.8/19.7, Main Spindle, Max speed 3,000 rpm, Spindle nose 8 ASA, Spindle bore 4.2/4.4, Chuck diameter 15.7, Motor power 40.2-51 HP, Max torque 590-748 lb/ft, Sub-Spindle, Max speed 4,500-5,000 ...more
Eurotech #Elite-Quattroflex-420SLLY, CNC lathe, 20.4" swing, collet chuck, 1.7" bar, 9.44" dia., 12.6" lgth, A2-5, 12 turret, Fanuc 18i-TB, Y-Axis, twin spindle / turret, 2005
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Eurotech
Model: ELITE-QUATTROFLEX-420SLLY
Year: 2005
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18i-TB CNC Control, Collet Chuck on Main ...more
Femco #HL-55NT, CNC turning center, Fanuc 0iTF, 28.6" swing, 15" chuck, 4.5" bar, 2020
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Femco
Model: HL-55NT
Year: 2020
2020 FEMCO HL-55 NT, Swing. 28.62", Machining Length. 13.39", Max. Turning Diameter. 24.21", Chuck Size. 15", Bar Capacity. 4.53", Power. 35 hp, Max RPM. 2,500 RPM, Turret Stations. 12, Tailstock. No, Cut Hours. 228 hr., Fanuc Series Oi-TF CNC Control, Chip Conveyor.
Femco #HL-55S, CNC lathe, 28" swing, 15" chuck, 3-jaw, 4.6" bar, 25" dia., 42" lgth, A2-11, 12 turret, Fanuc Oi-T, tailstock, chip conveyor, 2008
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Femco
Model: HL-55S
Year: 2008
Femco HL55S CNC Lathe - 2008, 28" Swing, 25" Diameter, 42" Length, 15" Chuck, Fanuc Ctrl, Tailstock, Chip Conveyor, Femco HL55S CNC Lathe, New: 2008, Swing over Bed: 28", Max Turning Diameter: 25", Max Turning Length: 42.12", Bar Capacity: 4.6", Spindle Bore: 5.2", Spindle Nose: A2-11, Spindle Motor: 35/30HP, Spindle ...more
Get email updates for newly added CNC Lathes and Turning Centers
A CNC lathe machine, or CNC turning machine, is a machine tool that rotates a bar of material to precisely cut, shape, and finish materials such as metal, wood, and plastic. The main spindle rotates the material, while the cutting tool can move along multiple axes.
Femco #HL-55S, CNC lathe, 28.6" swing, 15" chuck, 4.5" bar, 46" machining length, 24.4" turn diameter, 2008
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Femco
Model: HL-55S
Year: 2014
2014 FEMCO HL-55S, Swing. 28.6", Machining Length. 46", Max. Turning Diameter. 24.4", Chuck Size. 15", Bar Capacity. 4.5", Power. 35 hp, Max RPM. 2,500 RPM, Tailstock. Yes, Control. CNC (Fanuc 0i-TC).
Fortune #VTurn-26x60, CNC lathe, 1995
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Fortune
Model: VTURN-26X60
Year: 1995
Manufacturer FortuneModel Fortune VTurn-26 x 60 CNC LatheYear 1995Condition UsedStock Number 4780426.
Fortune #VTurn-26x60, CNC lathe, 1995
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Fortune
Model: VTURN-26X60
Year: 1995
Manufacturer FortuneModel Fortune VTurn-26 x 60 CNC LatheYear 1995Condition UsedStock Number 4780426.
Fryer #ET-30, CNC Flat Bed Lathe, 20" chuck, 4.1" bar, 2 axis, 30 HP, 1500 RPM, 15" diameter x 80" L max, 30" swing, tailstock, Touch2000, 8 station
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Fryer
Model: ET-30
FRYER ET-30 CNC Flat Bed Lathe #8103 #2, Chuck Size: 20, Bar Capacity: 4.1, # Axis: 2, Power: 30 HP, Max RPM: 1,500 RPM, Turning Diameter: 15, Swing: 30, Machining Length: 80, Tailstock: Yes, Weight: 15,000 lbs, Control CNC: (TOUCH 2000), FRYER TOUCH 2000 CNC CONTROL, 30HP SPINDLE MOTOR 3-SPEED GEARED HEADSTOCK ...more
Ganesh #Cyclone-32GT, CNC turning center, 6.7" swing, 5" chuck, 1.3" bar, 7.5 HP, 2010
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Ganesh
Model: CYCLONE-32GT
Year: 2010
2010 GANESH CYCLONE-32GT, Swing. 6.7", Max. Turning Diameter. 4.72", Chuck Size. 5", Bar Capacity. 1.375", Power. 7.5 hp, Max RPM. 6,000 RPM, Tailstock. No, Ganesh CNC Control.
Ganesh #Cyclone-52TTMY, Multi-Axis CNC Turning Center, 5.94" X, 1.38" Y, 17.32" Z, 7.48" turning diameter, 2.4" bore, A2-5, 16-station, 2011
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Ganesh
Model: CYCLONE-52TTMY
Year: 2011
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Mitsubishi M700 Series CNC Control, Twin 16 ...more
Ganesh #GT-3080CNC BB, 10" Big Bore CNC lathe, Fanuc 0iTD, chip conveyor, 2015
Deal Makers Machinery | Thousand Oaks, CA
Category: CNC Lathes and Turning Centers
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Ganesh
Model: GT-3080CNC BB
Year: 2015
FANUC Oi-TD, CHIP CONVEYOR, 10" BIG BORE CHUCK AND 6" BORE CHUCK.
Gildemeister #Twin-32, CNC lathe, Twin turrets with 12 tools each, 2 spindles, 8000 RPM, Seimens 840D control
Deal Makers Machinery | Thousand Oaks, CA
Category: CNC Lathes and Turning Centers
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Gildemeister
Model: TWIN 32
Year: 2001
Chip Conveyor, Bar Feeder, Lots of tooling.
Haas #DS-30, dual spindle CNC turning center, 31.7" swing, 26" centers, 8" chuck, 12 turret, 30 HP, 2017
Manufacturing Solutions | Santa Ana, CA
Category: CNC Lathes and Turning Centers
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Haas
Model: DS-30
Year: 2017
12.52"25.98"31.75"26"21"8.3"4000 RPM (max)1230 HP.
Haas #DS-30, CNC lathe, 10" chuck, 3" bar, 4800 RPM, 20 HP, 2016
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: DS-30
Year: 2016
, TRAVELS:, -X AXIS: 12.5", -Z AXIS: 23", RAPID RATES, -X: 472 IPM, -Z: 945 IPM, BAR CAPACITY: 3", SPINDLE CHUCK SIZE: 10", SPINDLE SPEED: 4,500 RPM, SPINDLE MOTOR: 30 HP, SPINDLE MAX TORQUE: 275.0 FT-LBF @ 600 RPM, SECONDARY BAR CAPACITY: 2", SECONDARY SPINDLE CHUCK SIZE: 8.3", SECONDARY SPINDLE SPEED: 4,800 RPM ...more
Haas #DS-30Y, dual spindle CNC lathe, 21" swing, 10" chuck, 2" bar, live tooling, like new, never run, 2024
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: DS-30Y
Year: 2024
2024 HAAS DS-30Y, Swing. 21", Machining Length. 23", Max. Turning Diameter. 18", X-Axis. 12.5", Y-Axis. 2", Z-Axis. 23", Chuck Size. 10", Bar Capacity. 2", Spindle Nose. A2-6, Power. 30 hp, Max RPM. 4,500 RPM, Tailstock. No, Live Tooling. Yes, Live Milling Max RPM. 4000 rpm, Sub Spindle. Yes, Sub Spindle Chuck. 8.3 ...more
Haas #DS-30Y, CNC lathe, 31.7" swing, 8" chuck, 2" bar, 18" dia., 23" lgth, A2-6, live tooling, sub spindle, rigid tap, 2021
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: DS-30Y
Year: 2021
2021 Haas DS-30Y Dual Spindle CNC Lathe, 32" Swing, 21" Over Cross. 10" Chuck Main, 8.3" Chuck Sub. 6K RPM on Live, 4K on C-Axis. 24-Station BMT65 Turret, Tons of Options, V2 Barfeeder included, optional equipment: Royal Workholding including Rota-Rack, Platinum Tooling, Haas DS-30Y CNC Dual Spindle Lathe, New: 2021 ...more
JUST ADDED!
Haas #DS-30Y, CNC lathe, 31.8" swing, 10" chuck, 3" bar, 23" centers, 4500 RPM, 12 turret, automatic tool presetter, 2014
Blackstone Machinery | Cerritos, CA
Category: CNC Lathes and Turning Centers
Seller: Blackstone Machinery
Location: Cerritos, CA
Mfr: Haas
Model: DS-30Y
Year: 2014
JUST ADDED!
Haas #DS30Y, CNC lathe, 31.8" swing, 10" chuck, 3" bar, 4500 RPM, 30 HP, 7-Axis, Iemca Boss 552HD magazine barfeed, 2021
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: DS30Y
Year: 2020
2020 HAAS DS-30Y CNC Lathe available. s include a 31.75" swing, 584.2 mm machining length, 8.3" chuck size, and 2.0" bar capacity. live tooling and a sub spindle. Max RPM of 4000 and 30.0 power. Ideal for precision turning., Bar Capacity: 3", Chuck Size: 10", Spindle Speed: 4,500 RPM, Spindle Motor: 30 HP, X Axis ...more
Haas #HL-2, CNC lathe, 20" swing, 8" chuck, 2" bar, tailstock, 15 HP, 3750 RPM, 1996
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: HL-2
Year: 1996
1996 HAAS HL-2, Swing. 20", Machining Length. 24", Max. Turning Diameter. 10", Chuck Size. 8", Bar Capacity. 2", Power. 15 hp, Max RPM. 3,750 RPM, Tailstock. Yes, HAAS CNC Control.
Haas #HL-2, CNC Lathe & Turning Center, 208/230 Volt, 1998
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Long Beach, CA
Mfr: Haas
Model: HL-2
Year: 1998
The Haas HL-2 CNC Lathe/Turning Center is a high-quality metalworking machine designed for precision turning and machining. Produced by the reputable brand Haas, this CNC-controlled lathe offers advanced technology and reliable performance. With its model specific to the Haas HL-2 CNC, this machining center is an ...more
Haas #HL-2, CNC Lathe & Turning Center
TNT Industrial | Orange, CA
Category: CNC Lathes and Turning Centers
Seller: TNT Industrial
Location: Long Beach, CA
Mfr: Haas
Model: HL-2
The Haas HL-2 CNC Lathe/Turning Center is a high-quality metalworking machine designed for precision turning and machining. Produced by the reputable brand Haas, this CNC-controlled lathe offers advanced technology and reliable performance. With its model specific to the Haas HL-2 CNC, this machining center is an ...more
Haas #HL-4, CNC turning center, 24" swing, 10" chuck, 2.5" bar, 34" centers, 14.5" dia., 3400 RPM, 12 turret, chip auger, bar feed interface, tailstock, 1997
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: HL-4
Year: 1997
Haas HL-4 CNC Turning Center, Haas HL-4 CNC Turning Center, New: 1997, Swing: 24", Center Distance: 34", Turning Diameter: 14.5", Bar Capacity: 2.5", Chuck Size: 10", Spindle Speed: 3400 RPM, Turret: 12 Station, Haas CNC Control, Chip Auger, Bar Feed Interface, Auto Tool Presetter, Parts Catcher, Tailstock.
Haas #HL-6, CNC lathe, 40" swing, 15" chuck, 25" dia., 44" lgth, 51" centers, 30 HP, 1999
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: HL-6
Year: 1999
1999 Haas HL-6, Haas HL-6 CNC Lathe, New: 1999, 40" Swing, 25" Turning Diameter, 44" Length, 51" Centers, 15" Chuck, 30 HP.
Haas #SL-20, CNC lathe, 3-jaw chuck, 2000
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: SL-20
Year: 2000
Manufacturer Haas, Model SL20, Year 2000, Condition Used.
Haas #SL-20T, CNC Lathe, 20" swing, 8" chuck, 2.5" bar, 4000 RPM, 30 HP, 10 station, MistBuster, 208/220 V., 3ph, 2007
Wheeler Machinery Sales | Pomona, CA
Category: CNC Lathes and Turning Centers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Haas
Model: SL-20T
Year: 2007
2007 HAAS SL-20B CNC Lathe #7931 #1, Chuck Size: 8.3, Bar Capacity: 2.5, Turning Diameter: 10.3, Max Turning Length: 20, Max Swing: 20, X-axis travel: 8.45, Z-axis travel: 20, Spindle Speed: 4,000 RPM, Spindle Motor: 30 HP, Turret: 10 Station, Power Requirement: 208/220 V; 3 Ph; 50/60 Hz, Approx Machine Weight: 9,000 ...more
Haas #SL-20T, CNC lathe, 23" swing, 8" chuck, 2" bar, 10.3" dia., 24" lgth, 20 HP, 4000 RPM, tailstock, manual tool presetter, 2008
PM Machines | Santa Ana, CA
Category: CNC Lathes and Turning Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: SL-20T
Year: 2008
2008 HAAS SL-20T, Swing. 23", Machining Length. 24", Chuck Size. 8", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Turning Dia. 10.3", Tailstock. Yes, Live Tooling. No, Sub Spindle. No, Parts Catcher, Manual tool PResetter, High Intensity Lighting( need bulbs replaced), Intuitive Programming System, Spindle ...more
Haas #SL-20T, CNC lathe, 23" swing, 8" chuck, 3-jaw, 2" bar, 10.3" dia., 20" lgth, 10 turrets, rigid tap, tailstock, 2004
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: SL-20T
Year: 2004
2004 Haas SL20T CNC Turning Center, HAAS SL20T CNC Turn Center, New: 2004, Control. Haas, Swing. 23", X-Axis Travel. 8.45", Z-Axis Travel. 20", Rapid Traverse Rates. 710 IPM, Max Bar Capacity. 2", Max Turning Dia. 10.3, Max Turning Length. 20", Spindle Speeds. 4,000 RPM, Spindle Motor. 20 HP, Turret Stations. 10 ...more
JUST ADDED!
Haas #SL-30, CNC turning center, 30" swing, 10" chuck, 3-jaw, 3" bar, 14.5" dia., 34" lgth, 12 turret, 3400 RPM, 30 HP, 2000
ACT Machinery | Fullerton, CA
Category: CNC Lathes and Turning Centers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Haas
Model: SL-30
Year: 2000
, Spindle Max. Speed, 3400 rpm, Bar Capacity, 3", Spindle Motor, 30 HP, Max Swing, 30", Max Turning Length, 34", Max Turning Diameter, 14.5", Turret, 12 Station, Weight, 16,000 lb, Dimensions, 180" x 80" x 85", Haas SL30 CNC Turning Center Year 2000 10" 3 Jaw Chuck Chip Auger Chucker ...more
JUST ADDED!
Haas #SL-40L, CNC turning center, 35.5" swing, 15" chuck, 3-jaw, 4" bar, 27.5" dia., 80" lgth, tool presetter, tailstock, A2-8, 12 turret, C-Axis, live tooling, Steady Rest, long bed, 2004
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: SL-40L
Year: 2004
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 80" Long Bed, Coolant ...more
Haas #SL-40T, CNC lathe, 40" swing, 15" chuck, 4" bar, 51" machining length, 25.5" turn diameter, 2001
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: SL-40T
Year: 2001
2001 HAAS SL-40T, Swing. 40", Machining Length. 51", Max. Turning Diameter. 25.5", Chuck Size. 15", Bar Capacity. 6", Power. 55 hp, Max RPM. 2,400 RPM, Tailstock. Yes, Live Tooling. No.
JUST ADDED!
Haas #ST-10, CNC lathe, 25.2" swing, 6" chuck, 1.7" bar, tailstock, automatic tool presetter, 2018
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-10
Year: 2018
2018 HAAS ST-10, Swing. 25.25", Machining Length. 16.5", Max. Turning Diameter. 14", Chuck Size. 6.5", Bar Capacity. 1.75", Power. 15 hp, Max RPM. 6,000 RPM, Tailstock. Yes, Live Tooling. No, Sub Spindle. No, HAAS CNC Control, Tailstock, Automatic Tool Presetter, Rigid Tapping.
JUST ADDED!
Haas #ST-10, CNC lathe, 25.2" swing, 6" chuck, 1.7" bar, 14" dia., 16.5" lgth, 15 HP, 6000 RPM, automatic tool presetter
PM Machines | Santa Ana, CA
Category: CNC Lathes and Turning Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: ST-10
Year: 2012
2012 HAAS ST-10, Swing. 25.25", Machining Length. 16.5", Chuck Size. 6.5", Bar Capacity. 1.75", Power. 15 hp, Max RPM. 6,000 RPM, Turning Dia. 14", Tailstock. No, Live Tooling. No, Sub Spindle. No, Automatic Tool Presetter, BOT Turret, Intuitive Programming System, Parts Catcher, Chip Conveyor, *Not all ...more
Haas #ST-10, CNC lathe, 1.7" bar, C-Axis, live tooling, rigid tap, 2011
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-10
Year: 2011
2011 Haas ST-10 w/ C-Axis Live Tooling, Haas ST-10 CNC Lathe, New: 2011, Turning Diameter: 12", Turning Length: 16", Bar Capacity: 1.75", Spindle Speed: 6000 RPM, Turret Stations: 12 (VDI), Haas CNC Control, Coolant Pump, Automatic Tool Presetter, Axial Driven Toolholder, Radial Driven Toolholder, Belt-Type Chip ...more
Haas #ST-15, CNC lathe, 27" swing, 8" chuck, 2.5" bar, 14" dia., 16" lgth, 20 HP, 4000 RPM, chip conveyor, tool presetter, tailstock, 2018
PM Machines | Santa Ana, CA
Category: CNC Lathes and Turning Centers
Seller: PM Machines
Location: Santa Ana, CA
Mfr: Haas
Model: ST-15
Year: 2018
Power On Time 5550, Spindle On Time 2746.14, Servo On Time 4126.14.
Haas #ST-15, CNC turning center, 27" swing, 8" chuck, 2.5" bar, barfeeder, chip conveyor, 2019
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-15
Year: 2019
2019 HAAS ST-15, Swing. 16.5", Max. Turning Length. 16", Max. Turning Diameter. 12", X-Axis. 7.88", Z-Axis. 16", Rapid Traverse X-Axis. 1200 ipm, Rapid Traverse Z-Axis. 1200 ipm, Chuck Size. 8.3", Bar Capacity. 2.5", Spindle Bore. 3.5 in, Spindle Nose. A2-6, Power. 20 hp, Max RPM. 4,000 RPM, HAAS CNC Control, HAAS ...more
Haas #ST-15, CNC lathe, 27" swing, 8" chuck, 2.5" bar, 16" machining length, 14" turn diameter, 2020
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-15
Year: 2020
2020 HAAS ST-15, Swing. 27", Machining Length. 16", Max. Turning Diameter. 14", Spindle Taper. A2-6, Chuck Size. 8.3", Bar Capacity. 2.5", Power. 20 hp, Max RPM. 4,000 RPM, Turret Stations. 12, HAAS CNC Control, Automatic Tool Presetter, Belt-Type Chip Conveyor, 30-Gallon Coolant Tank, Standard Low-Volt Transformer ...more
JUST ADDED!
Haas #ST-15Y, CNC Turning Center, Y-Axis, Live Tooling, Only 4 Cutting Hours, 2024
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-15Y
Year: 2024
Haas #ST-20, CNC turning center, 21" swing, 8" chuck, 3-jaw, 2" bar, 13" dia., 22.5" lgth, A2-6, 12 turret, rigid tap, tailstock, 2013
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-20
Year: 2013
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, A2-6 Spindle Nose, 12 Station ...more
Haas #ST-20, CNC lathe, 31.7" swing, 8" chuck, 2" bar, 20 HP, 4000 RPM, chip conveyor, 2013
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20
Year: 2013
2013 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", Max. Turning Diameter. 15", Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Tailstock. Yes, Live Tooling. No, HAAS CNC Control, Chip Conveyor.
Haas #ST-20, CNC lathe with automatic parts loader, 31.7" swing, 8" chuck, 2" bar, 20 HP, 2023
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20
Year: 2023
2023 HAAS ST-20, Swing. 31.75", Machining Length. 20.5", Max. Turning Diameter. 15", Chuck Size. 8.3", Bar Capacity. 2", Power. 20 hp, Max RPM. 4,000 RPM, Tailstock. No.
Haas #ST-20SS, CNC lathe, 31.7" swing, 8" chuck, 2" bar, live tooling, bar feed, 30 HP, 2016
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-20SS
Year: 2016
2016 HAAS ST-20SS, Swing. 31.75", Machining Length. 21", Max. Turning Diameter. 10", Distance Between Centers. 21", X-Axis. 9.3", Z-Axis. 21", ATC. 24, Chuck Size. 8.3", Bar Capacity. 2", Power. 30 hp, Max RPM. 6,000 RPM, Tailstock. Yes, Live Tooling. Yes, Dimensions. 143 x 90 x 87, Weight. 10,500 Lbs, ** $159k ...more
Haas #ST-20Y, CNC lathe, 31.7" swing, 8" chuck, 2.5" bar, 12" dia., 21" lgth, 12 turret, A2-6, 4000 RPM, 20 HP, rigid tap, 2013
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-20Y
Year: 2013
2013 Haas ST-20Y w/ Live Tooling C-Axis, Y-Axis, Live Holders, Tailstock, Bar Feeder & More, Haas ST-20Y CNC Lathe w/ Y-Axis, Live Tooling, & Bar Feeder, New: 2013, 3-Jaw Hydraulic Chuck: 8.3", Bar Capacity: 2.5", Spindle Bore: 3.5", X-Axis Travel: 9.3", Z-Axis Travel: 21", Turret: 12 Station VDI/BOT, Spindle: ...more
Haas #ST-20Y, CNC lathe, robot inbox, 2021
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: ST-20Y
Year: 2021
Manufacturer Haas, Model ST-20Y, Year 2021, Condition Used.
Haas #ST-20Y, CNC lathe, robot inbox, 2021
Bay Area CNC Machinery | Walnut Creek, CA
Category: CNC Lathes and Turning Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: ST-20Y
Year: 2021
Manufacturer HaasModel ST-20YYear 2021Condition Used.
Haas #ST-25, CNC lathe, 20.7" swing, 10" chuck, 3" bar, 31" centers, 15" dia., 21" lgth, 2-Axis, tool presetter, parts catcher, 2021
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-25
Year: 2021
EXTREMELY LOW HOURS ON THIS 2021 HAAS ST-25. Used CNC Lathe s include 20.75" swing, 21" machining length, 10" chuck, and 3" bar capacity. Delivers 30hp with a max RPM of 3400 and 15" turning diameter. No tailstock. Ideal for precision machining., 2021 HAAS ST-25, Tool Pre-setter, Parts Catcher, Chip conveyor, Bar ...more
Haas #ST-25Y, CNC lathe, 31.7" swing, 10" chuck, 3" bar, 12" dia., 21" lgth, 30 HP, 3400 RPM, 3-Axis, tailstock, live tool, 2022
Machinery Resources Intl | Simi Valley, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: ST-25Y
Year: 2022
2022 HAAS ST-25Y CNC Lathe with Barfeed. s 31.75" swing, 21" machining length, and 12" turning diameter. 6,000 RPM live tooling, TSC, and high-pressure coolant. Perfect for high-efficiency CNC turning operations., SWING 31.75", MACHINING LENGTH 21", CHUCK SIZE 10", BAR CAPACITY 3", POWER 30 hp, MAX RPM 3,400 RPM ...more
JUST ADDED!
Haas #ST-30, CNC lathe, 21" swing, 32.5" centers, 10" chuck, 3" bar, tool presetter, chip conveyor, 2014
Machinery Network Inc | Encino, CA
Category: CNC Lathes and Turning Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: ST-30
Year: 2014
2014 HAAS ST30, Swing. 21", Machining Length. 32.5", Max. Turning Diameter. 15", Distance Between Centers. 32.5", X-Axis. 9.4", Z-Axis. 32.5", Rapid Traverse X-Axis. 945 ipm, Rapid Traverse Z-Axis. 945 ipm, Spindle Taper. A2-6, Chuck Size. 10", Bar Capacity. 3", Spindle Bore. 3.5 in, Spindle Nose. A2-6, Power. 30 hp ...more
Haas #ST-30, CNC lathe, 21" swing, 10" chuck, 3-jaw, 3" bar, 32.5" centers, 21" dia., 26" lgth, 30 HP, 3400 RPM, dual Steady Rest, tool presetter, tailstock, 2020
Machnet | Santa Monica, CA
Category: CNC Lathes and Turning Centers
Seller: Machnet
Location: Santa Monica, CA
Mfr: Haas
Model: ST-30
Year: 2020
2020 Haas ST30 CNC Lathe - Excellent Condition, low hours!, 10" Hydraulic Chuck, 21" Swing, 32.5" Centers, 3" Bar Cap, Programmable Hydraulic Tailstock, Dual Steady Rest, Tool Presetter, Haas ST-30 Lathe, w/ Dual Steady Rest, Tool Presetter, & Tailstock, New: 2020, Excellent Condition Low Hours, Clean and Loaded ...more
JUST ADDED!
Haas #ST-30, CNC turning center, 21" swing, 3" bar, 15" dia., 32.5" lgth, 12 turret, A2-6, 3200 RPM, 30 HP, rigid tap, 2014
MachineStation | Lake Elsinore, CA
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: ST-30
Year: 2014
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Haas CNC Control, 12 Station Automatic Turret ...more
