1 - 50 of 125 listings
Featured
Arol #Saturno 2013, champagne corker
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Arol
Model: SATURNO
The machine is like new, and ready to go. Minimal hours have been put on it. No garuntee on working order. I'm working on getting on it. This machine is sold as is., possibility of negotiation.
Featured
Arol Crowner
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Arol
Good condition, pulled off active line 460/266Y voltage, 3 Phase, 60 Hz This machine is sold as is., possibility of negotiation.
Featured
Bir-Mauri, Counter Pressure Filler w/ parts
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Bir-Mauri
This piece of machinery is a 24-head counter pressure filler. It is in good condition and runs well. Its dimensions are approximately 80´´x88´´x79´´. The serial number is AF.166. It has different sized feeding equipment as well. This machine is sold as is., possibility of negotiation.
Featured
Filamatic #Pro-Line-Econofil, bottler w/ labeler & accumulation table, compressor included
Premium eJuice USA LLC | Louisville, KY
Category: Bottling Equipment
Seller: Premium eJuice USA LLC
Location: Louisville, KY
Mfr: Filamatic
Model: PRO-LINE-ECONOFIL
Year: 2024
Purchased brand new and never used due to sudden regulatory changes in industry. Includes Air Compressor. Purchasor must arrange packing and shipping.
Featured
Gai #6063, aluminum capsule dispenser/heater/spinner
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Gai
Model: 6063
This item is a 2004 gai, 2 station capsule dispenser, and labeler. The equipment visually looks good. It comes with different-sized feeding equipment. No guarantee is given to the working order of the machine. The machine measures 102 inches long, 43 inches wide, and 79 inches tall This machine is sold as is. ...more
Featured
Procomac #Rotostar, interior bottle rinser, 24 head
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Procomac
Model: ROTOSTAR
The machine has 24 bottle slots. It comes with spare parts and feeding stars of various sizes. It is made of stainless steel. It measures approximately 172 cm wide, 147 cm high, and 183 cm long. This machine is sold as is., Negotiation possible., La machine dispose de 24 emplacements pour biberons. Elle est fournie ...more
Featured
Robino & Galandrino, wire hooder w/ hood magazine dispenser
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Robino & Galandrino
Robino &Galandrino -wire hooder- 2013, #Record 500 Rotary Wire Hood application machine (Scheme: Rec 293 480v, 3 phase, 60Hz, 9.6Amp, S/N :0RE12125214) w/ wire hood magazine dispensing system.18kw gear drive motor, rotary wire hooding turret, bottle infeed screw system & stainless steel electrical control box w/ ...more
Featured
Stone bottle exterior bottle rinser and Stone dryer
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Stone
is in pretty good condition, with no major problems with it. It measures approximately 82 inches long, 54 inches long, and 29 inches wide. This machine is sold as is., possibility of negotiation.
JUST ADDED!
ACASI T-Cap Capper 8mm - 130mm
Elite Machine | Fairfield, NJ
Category: Bottling Equipment
Seller: Elite Machine
Location: Fullerton, CA
Mfr: Acasi
Model: T-CAP
8 Spindle ACASI T-Cap Capper / Automatic Screw Cap Machine from 8mm – 130mm.
Accutek #FPC-2, Bottling Line, w/Filler, Plugger, Capper, Labeller, 42" diameter Unscrambling Turn Table, 42" diameter Accumulation Table, Never Used, 2014
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Accutek
Model: FPC-2
Year: 2014
Make: Accutek FPC-2 Bottling Line, 2014, Model: FPC-2, Year: 2014, Machine Location: Upon Request, 42″ Diameter Unscrambling Turntable, Variable Speed Material Handling Turntable with Food Grade Stainless Steel / UHMW Guide Rail Package., Key s:, • Heavy Duty Stainless Steel Frame, • Precision Cut ...more
Accutek Bottle Filling Line, Capacity Tightener & Accumulation Table
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Accutek
used accutek pinch valve filling line. consisting of accutek model 28-048-aca 48" diameter rotary stainless steel turntable. accutek model 00-550-000 pinch valve filler, speeds up to 100 cpm (depending on application), missing fill nozzles. accutek model 22-001-000 semi automatic cap tightener, cap size:.39" to 4.72" ...more
Accutek, Hot Fill Bottle Filling Line, AVF2-16 2-head Volumetric Bottle Filler w/ Heated Hopper, 2018
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Accutek
Year: 2018
Make: Accutek, Model: AVF2-16, Year: 2018, Machine Location: Upon Request, Accutek Hot Fill Bottle Filling Line with AVF2-16 2-Head Volumetric Bottle Filler with Heated Hopper, 2018, This system is set up to fill, have caps hand-applied by operators, and then a semi-automatic spindle capper torques the caps down ...more
Altman Browning #URS 5000S, Bottle Decapitator, 36" rotary turntable, 8" x 21" vibratory outfeed conveyor w/2.5" perforated section, 120 V, 2003
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Altman Browning
Model: URS 5000S
Year: 2003
Altman Browning Bottle Decapitator, model URS 5000S, serial # 0346-003. Includes 36" rotary turntable with feed guides leading to bottle crusher with stainless steel jaws. Jaws lead to vibratory outfeed conveyor measuring 8" x 21" with 2-1/2" perforated section. Includes controls for feed table and outfeed conveyor. ...more
Get email updates for newly added Bottling Equipment
Bottling equipment (also known as bottling systems) are specialized machines used to fill, cap, and label bottles in industries like food and beverage, pharmaceuticals, and cosmetics. By automating the bottling process, these machines ensure consistent product volume, secure sealing, and accurate labeling to maintain product quality and meet regulatory standards.
Arol #Saturno 2013, champagne corker
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Arol
Model: SATURNO
The machine is like new, and ready to go. Minimal hours have been put on it. No garuntee on working order. I'm working on getting on it. This machine is sold as is., possibility of negotiation.
Arol Crowner
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Arol
Good condition, pulled off active line 460/266Y voltage, 3 Phase, 60 Hz This machine is sold as is., possibility of negotiation.
Arrowhead #Gripper-S-EL, Bottle Elevator Conveyor, 36" infeed H, 12" opening width, 3 HP, 1700 RPM, 230/460 V., 3-Ph.
Genemco | Hearne, TX
Category: Bottling Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Arrowhead
Model: GRIPPER S-EL
Arrowhead Conveyor Company Bottle Elevator. Model: GRIPPER S-EL. P.O: CSC 0109. S/O and Equip No: 076760SE. Line No: 301. Lines per chain: 238. Maximum opening width: 12 in. Sew-Eurodrive Motor (aperture), 3 hp, 1700 rpm, 230/460 V, 8.6/4.3 amps, 60 Hz, 3 phase. Sew-Eurodrive Variable Speed Reducer, 10.50 ratio ...more
Biner Ellison ##F-52-TDG-24SS, Rotary Bottle Filler, 24-Head, Stainless Steel, Explosion Proof
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Biner Ellison
Model: #F-52-TDG-24SS
used- biner ellison 24-head rotary bottle filler, model f-52 tdg 24ss previously filling as an explosion proof filler at cosmetics processing and packaging facility. serial number 5343.
Bir-Mauri, Counter Pressure Filler w/ parts
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Bir-Mauri
This piece of machinery is a 24-head counter pressure filler. It is in good condition and runs well. Its dimensions are approximately 80´´x88´´x79´´. The serial number is AF.166. It has different sized feeding equipment as well. This machine is sold as is., possibility of negotiation.
Busse / Arrowhead Systems #8' x20' warmer, conveyor style spray bottle warmer, with 18" wide x 150" long infeed conveyor, 22 spray nozzles
Frain Industries | Carol Stream, IL
Category: Bottling Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Busse
Model: 8'X20'WARMER
Busse / Arrowhead Systems, model 8′ x 20′ warmer, conveyor style spray bottle warmer. a 18" wide x 150" long infeed conveyor, 94" wide x 250" long conveyor thru tunnel with a 19" high aperture, (22) spray nozzels supplied by a 10 HP Paco centrifugal pump with a 7¼" ...more
Capmatic Intrepid #4A/X-PP-222, Complete Line, 60 CPM, Monoblock Fill, Plug & Capacity, Allen Bradley ControlLogix 5560M03SE PLC
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Capmatic
Model: 4A/X-PP-222
used- capmatic intrepid model 4a/x-pp-222 monoblock filler, plugger and capper. capable of speeds up to 60 cpm (depending on application). consists of a palace model d18-spb/hs 15 bulk bottle unscrambler with inonized air cleaner and bulk bottle elevator. capmatic intrepid monoblock filler plugger and capper with ...more
Capmatic #Bambino, Monoblock Fill line
Federal Equipment Company | Cleveland, OH
Category: Bottling Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Capmatic
Model: BAMBINO
Used Capmatic Monoblock filler, plugger, capper, model Bambino, serial# BB11051800.
Capmatic Intrepid #F4-A/X-PP-222, Liquid Filler, Plugger & Capping System, 60 BPM, 4-1/2" belt, AB PLC, w/ change parts, 220 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Capmatic
Model: F4-A/X-PP-222
used- capmatic intrepid monoblock filler plugger and capper, model f4-a/x-pp-222. capable of speeds up to 60 bottles per minute, depending on application. 4-1/2" wide conveyor belt. control panel with allen bradley panelview plus 1000 hmi, allen bradley controllogix 5560m03se plc, kinetix 6000 servo drives. has ...more
Capmatic, Bottle Filling Line, w/ change parts
Federal Equipment Company | Cleveland, OH
Category: Bottling Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Capmatic
Used Capmatic liquid filling line for bottles consisting of: Capmatic unscrambler, model Starsort, integrated hopper elevator, air jet bottom cleaner, 220 volt, Allen Bradley controls, serial# UN14102154, built 2015. Capmatic inline volumetric filler, model Accurofill 6-0, 6 nozzle, with agitated and jacketed product ...more
Capmatic, Bottling Line for Nail Polish, Capper, Filler, Labeler, Stainless Steel, Allen Bradley Controls, 240 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Capmatic
used- capmatic bottling line set-up for nail polish. line consists of 1 - capmatic capper, 1- filler, and 1- pressure sensitive labeler. includes accumulation tables, tabletop cap testers and intermediary conveyor. all stainless steel construction. color touch screen hmi. allen bradley controls. 3/60/240v.
DT Kalish Kalisort #073, bottle orientor, up to 80 bottles/min., integrated Stainless Steel bottle hopper w/elevator, #2604-43
Federal Equipment Company | Cleveland, OH
Category: Bottling Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Dt Kalish
Model: KALISRT 073
Used DT Kalish bottle orientor, type Kalisort, model 073, speeds up to 80 bottles/minute, integrated stainless steel bottle hopper with elevator, star wheel with bottle orientor, integrated bottle inverter with air cleaner, with change parts for 45cc, 60 cc and 85 cc, 120 volt with controls, serial#, built.
ELF #CTRI-8, Volumeteric Pressure/Gravity Filler, 8-Head inline
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Elf
Model: CTRI-8
ELF (Electronic Liquid Filling) Volumetric Pressure/Gravity Filler, Model CTRI-8, 8-Head Inline time-based Gravity and Pressure/Gravity filler suitable for filling water-thin to semi-viscous liquids. Includes controller. Previously used in cosmetics application., Heads: 8 Heads, Materials of Construction: Stainless ...more
Elmar Zalkin, monoblock filler, 36-Head Filler, 16-Head Capper, 67 oz max, AB PLC & inverter drive, 480 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Elmar
used elmar 36 station filler turret with fowler zalkin 16 head pick and place" capping turret complete with infeed timing screw, infeed starwheel, intermediate transfer starwheel and discharge starwheel all mounted on a monoblock main base with the following: 3-3/4" diameter super extended cylinders (max fill range 67 ...more
Federal #188R, Rotary Filler and Capper, 16oz w/ 38mm caps, LR, AB VFD Control, 230 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Federal
Model: 188R
used- federal model 188r 18 valve filler with 8 head capper. set for 38mm caps. last ran juice, 16 oz. 3/4" diameter valves set on 5 3/8" centers. left to right clockwise direction. allen bradley flex vfd speed controller. elec: 3/60/230v.
Federal #GWS185L, Rotary Filler Capper, 1 gallon Water Bottles, 38mm caps, AB PLC, 220 V.
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Federal
Model: GWS185L
used- federal 18 valve filler with 5 head snap cap capper, model gws185l last running 1 gallon water products with 38mm nap caps. 1" dia valves on 6.75" centers. right to left counter clockwise direction. manual filler and cap height adjustment. container back up photo eye detection. panel view operator interface ...more
Federal, Bottle Filler, 6 filling valves, 1" diameter Nozzles, fills 1/2 pint to 1/2 gallon, right hand set up, 1/2 HP, 1750 RPM, 230/460 V
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Federal
Filler, bottle, manufactured by Federal, stainless steel, 6 filling valves. Unit is right-hand set up with nozzle sizes of 1" dia, fills 1/2 pint to 1/2 gallon, run with 1/2 230/460V, 1750 RPM drive, machine number 386A62RS221, part number 5439182., Heads: 6, Materials of Construction: Stainless Steel, Previous Use: ...more
Filamatic #Pro-Line-Econofil, bottler w/ labeler & accumulation table, compressor included
Premium eJuice USA LLC | Louisville, KY
Category: Bottling Equipment
Seller: Premium eJuice USA LLC
Location: Louisville, KY
Mfr: Filamatic
Model: PRO-LINE-ECONOFIL
Year: 2024
Purchased brand new and never used due to sudden regulatory changes in industry. Includes Air Compressor. Purchasor must arrange packing and shipping.
Fogg, Rotary Bottle Filler, (22) 1-1/8" diameter Valves on 7" valve centers, 54" diameter x 12" deep filler bowl, 4-head rotary snap-cap type capper
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Fogg
Fogg rotary bottle filler, includes (22) valves, all stainless steel construction with (22) 1-1/8" diameter valves on 7" valve centers, previously used for 1 gallon bottle of gallon marinated juice for meat, 54" diameter x 12" deep filler bowl. Includes 4-head rotary snap-cap type capper. Filler in working condition ...more
GAI #12-Head, Mobile Bottling Truck w/ Filling Line, 59000 Mile Diesel Truck, 2017
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gai
Model: 12-HEAD
Year: 2017
2017 Mobile Bottling Truck with 12-head GAI counter pressure filler, rinser, labeler, 26mm crowner, onboard compressed air, and diesel generator. Cost new over $875,000.Previously used for beer, hard cider, and sparkling wine. Still or carbonated. It has run 187ml, 250ml, 12oz heritage, 12oz long neck, 500ml, 22oz ...more
Gai #6063, aluminum capsule dispenser/heater/spinner
DH Lescombes Winery And Bistro | Deming, NM
Category: Bottling Equipment
Seller: DH Lescombes Winery And Bistro
Location: Deming, NM
Mfr: Gai
Model: 6063
This item is a 2004 gai, 2 station capsule dispenser, and labeler. The equipment visually looks good. It comes with different-sized feeding equipment. No guarantee is given to the working order of the machine. The machine measures 102 inches long, 43 inches wide, and 79 inches tall This machine is sold as is. ...more
Gongda Machine Co. #GD-CP-8, Complete Drink Bottle Fulfillment Production Line, 1000-2000 BPH rinser & dryer, 600-800 BPH filler, 500-2300 BPH capper, 2000-3000 BPH pasteurizer, 3000-6000 BPH labele**
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Gongda Machine Co.
Model: GD-CP-8
Year: 2015
Complete Drink Bottle Fulfillment Production Line, Manufactured by Gongda Machine Co. Includes 47" x 29-1/2" x 43" accumulation feed table, 44" x 43" curved belt; Model GD-CP-8 capacity bottle rinser rated for 1,000 - 2,000 bottles/hr; Auto Line Model GD-ZX-04 cap 4-head bottle filler, rated for 600 to 800 BPH; Model ...more
Guan Hong #201618CZ144, bottle rotary filler/capper, 2 head, 1/4" dia nozzle, PLC+touch screen, 2016
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Guan Hong
Model: 201618CZ144
Year: 2016
GuanHong Machinery rotary filler and capper machine, Model 20161822144, Number GH6144, 304 stainless steel, 2-Filling heads, 1/4" diameter nozzle, Capper. Rotary die bottle slot approximately 7/8" OD diameter valves, complete with cap feeder, Two peristaltic pumps, and conveyor: 120" long x 3 1/4" width. Program ...more
Guangzhou Wanshun #GZWS-08657, bottling line, liquid, 2 head, 25-250ml, automatic fill/cap/label
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Guangzhou Wanshun
Model: GZWS-08657
Stainless steel bottling line configured for compact liquid bottles ranging from 25 to 250ml, ideal for applications such as tinctures, essential oils, cosmetics, and health supplements. The line s a twin-head servo-controlled filling system with touchscreen controls and optional heating for viscous products. Cap ...more
Guangzhou Wanshun, Chinese made bottling line, 2 head servo fillter, capper, labeler, jacketed hopper, conveyors
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Guangzhou Wanshun
Fully integrated automatic bottling line. s include a 2-head servo-driven filler with touchscreen control, pneumatic diaphragm pump, heated stainless steel hopper with mixer, automatic cap feeder with sorting bowl, capping system with mechanical arms, and automatic round bottle labeling machine (GZWS-08657). Includes ...more
Herbold, Bottle Wash Line, 2.5 Ton/hr, w/ Pelletizer & Extruder
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Herbold
used- herbold wash line. converting hdpe/pe bottles to 14 mm hdpe/pe flakes for compounding with a capacity of 2.5 tonnes per hour. consisting of: (1) acta bale breaker, (1) staddler ballistic separator, (1) pre-separation tank, (1) herbold granulator (1) bottle bunker and granulator stand, (1) herbold friction ...more
Hoppmann #FRS-60-SS, centrifugal bottle capacity feeder, (30) 5-1/2" L x 3" W x 9" H pockets, 1995
Genemco | Hearne, TX
Category: Bottling Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Hoppmann
Model: FRS-60-SS
Year: 1995
1995 Hoppmann FRS-60 SS Centrifugal Feeder. Model: FRS 60 SS. S/N: 25517. Hoppmann's FRS-60 is specifically designed to feed a wide range of large bottles and parts. The delivery rate varies from moderate to high speed depending on part characteristics. The FRS-60 is engineered to interface with Hoppmann ...more
Hoppmann #FT 50, Plastic Bottle Feeder for filling line, 1 HP, 1987
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Hoppmann
Model: FT 50
Year: 1987
Hoppman Corp. plastic bottle feeder for filling line. Unit is a model FT, Series 50. Unit s stainless steel product contact parts, stainless steel stand and frame assembly. Last used in filling line for pharmaceutical application. Unit is powered by Baldor 1 HP gear head drive motor and includes discharge conveyor ...more
Hoppmann #FT-50, Centrifugal Feeder, 54.5" bowl diameter, 47" drum diameter, 0.75 HP, 1750 RPM, 90 V., 1990
Genemco | Hearne, TX
Category: Bottling Equipment
Seller: Genemco
Location: Hearne, TX
Mfr: Hoppmann
Model: FT-50
Year: 1990
1990 Hoppman Centrifugal Feeder. Model: FT-50. S/N's:12832. Inside dimensions: 1 ft. 1-1/2 in. L x 11-1/2 in. W x 11-1/2 in. H. Bowl diameter: 4 ft. 6-1/2 in. dia. x 10-1/2 in. H. Drum diameter: 3 ft. 11 in. Maximum object size: 3 in. W x 4-1/2 in. H. Baldor Electric Motor,.75 hp, 1750 rpm, 90 V. Baldor Speed ...more
Hoppmann, belt orientor, automatic, bottle orienter, uses (2) 5" L x 1/2" W side belts to orient bottles by their neck using photoeye feedback
Frain Industries | Carol Stream, IL
Category: Bottling Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Hoppmann
Hoppmann Belt Orientor, Automatic, bottle orienter. Uses two 5"L x 1/2"W side belts to orient bottles by their neck using photoeye feedback. Has belt gap up to 8 1/2" wide, 36" hand crank vertical head adjustment, thumb screw adjustment for belt gap, four feedback photoeyes, and E-stop. Designed to ...more
Huber #WFS-G-15H, Stopper Washer, 316 Stainless Steel contact parts, 13-15 kg total, 92 liter drum, 460V, 590mm drum diameter, 1987
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Huber
Model: WFS-G 15H
Year: 1987
Huber Vial Washer Model WFS-G 15H - Stainless steel construction with 316 contact parts. Handles total loads up to 15 kg and includes a 92-liter drum. Powered by a 460-volt system., Materials of Construction: 316 Stainless Steel, Basis: FOB.
IC Filling Systems #551, Automatic Isobaric Microblock, Rinser, Filler, Cappper, 1000 bottles/hr. for 330 ml, (5) nozzle rinsing station, (5) electro pneumatic isobaric valves, 26 mm caps capper & c**
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Ic Filling Systems
Model: 551
IC Filling Systems Automatic Isobaric Microblock Model 551 Rinser-Filler-Capper, EPV (Electro Pneumatic Filling Valves) with pre-evacuation of air, suitable for filling beer and carbonated beverages. Includes rinsing station with (5) nozzles, counter pressure filling station with (5) electro pneumatic isobaric valves ...more
IMA #F97, MultiFill Filler/Capper, monoblock, 4-station, 480 V., 2008, AS IS
Federal Equipment Company | Cleveland, OH
Category: Bottling Equipment
Seller: Federal Equipment Company
Location: Cleveland, OH
Mfr: Ima
Model: F97
Year: 2008
Used IMA Multifill monoblock filler, model F97, setup for (4) piston fill station(less piston assemblies), single head cap placer with cap elevator and bowl feeder, single head screw capper, integrated feed and discharge conveyors, reject station, IMA RT1000 feed accumulation table, with control panel (less PLC or ...more
IMA #Swiftpack, Complete Solid Dose Bottle Line, turnkey clean/fill/cap/label line, w/ cottoner,
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Ima
Model: SWIFTPACK
used- ima swiftpack complete solid dose bottle line. line consists of a kaps-all model au-6c automatic bottle unscrambler with ionized air cleaner, thermo ramsey model versa rx checkweigher for empty bottles, ima model b12 electronic track counter, themor ramsey model versa rx checkweigher with reject, pharmafill ...more
Norland International #GlassPak66, Bottling Line, 18-Head Bottle Filler, used for 16 oz @ 70 BPM, 16.9 oz max Can Size, 52" x 60" Can Table, 5 RPM, 2020
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: International
Model: GLASSPAK66
Year: 2020
Make: Norland International, Model: GlassPak66, Year: 2020, Machine Location: Upon Request, Norland International Complete line with (2) GlassPak66 Monoblock Systems (16oz and 25 Oz) for Glass or Aluminum with Fluid Solutions 3 Head ROPP Capper, 2020:, This line was previously used for filling and capping 16 oz and 25 ...more
Iwka / Oystar / Oystar #CP220, aautomatic star wheel bottle loader, over 200 cartson per minute
Frain Industries | Carol Stream, IL
Category: Bottling Equipment
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Iwka / Oystar
Model: CP220
Automatic star wheel bottle loader capable of speeds of over 200 cartons per minute. Last used on an IWKA 6" center horizontal cartoner. OAD: 22" L x 18" W x 20" H.
Kaps-All #FA-PG-E, Complete Bottling & Corking Line, PLC Control, 12 nozzle, Stainless Steel
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kaps-All
Model: FA-PG-E
Year: 2000
Make: Kaps-All, Model: FA-PG-E, Year: 2000, Machine Location: Upon Request, High-speed Kaps-All bottling and corking line featuring AC-65 inverting air bottle cleaner, FA-PG-E 12-head inline filler, BC-23 bottle carrier, 16′ & 8′ conveyors, and custom feeder corker. Ideal for beer, cider, sparkling ...more
KHS #FSM, 48-head rotary short-tube bottle rinser/filler/cro, 300 bottles per min., Depalletizer & Labeler, 2013
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Khs
Model: FSM
Year: 2013
Make: KHS, Model: FSM, Year: 2013, Machine Location: Upon Request, Used 48-Head KHS Rotary Short-Tube Bottle Rinser, Filler, Crowner with Complete Used Bottling Line including Depalletizer, Labeler, Crown Elevator, Case Packer, Case Erector, Carrier Erector, & More, 2013:, Previously used for filling beer. ...more
Kosme/Krones #Barifill R-FC 24 Complete Bottle Filling Line, Up to 120 bpm, 2015
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kosme
Model: BARIFILL R-FC
Year: 2015
Make: Kosme, Model: Barifill R-FC, Year: 2015, Machine Location: Upon Request, – Up to 120 bpm, – Included:, Bottle Depalletizer, Accumulation Table, Conveyors, Bottle Rinser, 4 Head Capper, Cap Hopper w/ Magnetic Belt Feed, Bottle Dryer, Pack off Conveyor, – Last Running 12 oz Heritage Bottles ...more
Kosme #Barifill-R-FC, High Speed Bottling Line, rotary counter pressure filler, 0.33L to 2.5L bottle size, 2017
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Kosme
Model: BARIFILL-R-FC
Year: 2017
Make: Kosme, Model: Barifill R-FC, Year: 2017, Machine Location: Upon Request, Kosme Barifill R-FC Filler, 2017, -Type: Rotary Counter Pressure filler, -Bottle Size: Typically 0.33L to 2.5L, -Pneumatic Requirements: 6 Bar, -Electrical Requirements: 460 V, 3 P, 60 Hz, Kosme Flexa Sensicol 600-10-1 Labeller, 2017 ...more
Krones #040-113-M, Mecafill 40 Head Bottle Filler w/ Variojet Rinser, 2002
Revelation Machinery | Chicago, IL
Category: Bottling Equipment
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Krones
Model: 040-113-M
Year: 2002
Make: Krones, Model: 040-113-M, Year: 2002, Machine Location: Upon Request, Mecafill Model, Variojet Rinser, Sterile Filter, Number of Filler Heads: 40, Speed: 240 Bottles per Minute, Setup: 12 oz. Longneck Bottles, Includes Change Parts for 22 oz. Longneck Bottles, Last Use: Beer.
Krones #Contiform-324-Pro, PET bottling & packaging line, capper, compressors, process skids
Machinery & Equipment Co | Brisbane, CA
Category: Bottling Equipment
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Krones
Model: CONTIFORM-324-PRO
High-speed PET bottling and packaging line manufactured by Krones. The line includes a Krones Contiform 324 Pro PET stretch blow molding machine with 24 blow stations, infrared linear oven, and Air Wizard Plus air recovery system, integrated with a Krones 88-head volumetric mono-bloc filler/capper. Cap handling ...more
Krones #Modufill-PET, 54000 BPH high speed water bottling line, 2017
Libra Machinery & Equipment LLC | Palmerton, PA
Category: Bottling Equipment
Seller: Libra Machinery & Equipment LLC
Location: Palmerton, PA
Mfr: Krones
Model: MODUFILL PET
Year: 2017
Used Krones 54000 bph bottling line from Krones Contiform Bloc to Pallet Wrapper, mfg 2017:, This line has just been removed and is skidded and available. The line is complete from Blow Molder (Moulder) to Pallet Stretch Wrapper and was originally desighed in 2017 and installed in 2019. It ran until 2022 and has ...more
Krones/Kosme @2000, 30 Head Triblock carbonated beer bottling line, 180 btls/min, 2017
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Krones
Year: 2017
used- krones/kosme 30 head triblock carbonated beer bottling line. model 2000 sychroblock barifill 30/1200/30/1. last running at 180 bottles per minute. line consists of a chsc bulk bottle depalletizer, krones/kosme 10 head rotary labeler, krones/kosme 30 head triblock rinser filler and capper. dual krones checkmats ...more
Martin Robotics #8-Shooter, 8-Head Bottle Filler, 20-40 CPM, 12 oz, 2.3-3.4" diameter x 7.6-12.3" H, w/ Labeler, Loader & Pack-Off Table
Aaron Equipment Co | Schaumburg, IL
Category: Bottling Equipment
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Martin
Model: 8-SHOOTER
used martin robotics 8-head robotic bottle filler, model 8 shooter. unit was last running 30-40 12 ounce bottles per minute. can handle containers of 2.3" to 3.4" in diameter and 7.625" to 12.3" in height. last used in brewery operation. min 100 psi @ 7 cfm. 1/60/120v. approximately 2,000lbs. includes manual ...more
