1 - 50 of 85 listings
Acer #3VK, vertical mill, 10" x50"tbl., 3 HP, 34" X, 16" Y, 16" Z, variable speed, R-8, Accu-Rite digital read out, vise
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Acer
Model: 3VK
Working Surface 10" x 50" Logitudinal Travel 34" Cross Travel 16" Vertical Knee Travel 16" Ram Travel 20" T-Slots Number and Size 3, 5/8" Main Motor 3 HP Head Moves Right to Left 90° Head Tilts front to Back 45° Spindle Drive Variable Spindle Speed 60 ~ 4,500 Spindle Taper R-8 Power Quill Feed 0.0015", 0.003" ...more
JUST ADDED!
Acer #E-Mill-3VSII, 3-Axis CNC Vertical Knee Mill, 49" x 9" table, 34" X, 12" Y, 16" Z, 3 HP, 4500 RPM, Acu-Rite MillPwr G2 CNC, 230 Volt, 2022
Heavy Wall Consulting | Long Beach, CA
Seller: Heavy Wall Consulting
Location: Simi Valley, CA
Mfr: Acer
Model: E-MILL-3VSII
Year: 2022
We only have three hours on this machine. Great machine for prototyping and shops that want the flexibility to run manually, do a quick conversational program on the machine, or upload a full Cnc program., The Acer E-Mill 3VSII is a 3-axis CNC knee mill built for accurate milling, drilling, boring, and tapping in ...more
Acra #2V, variable speed vertical mill, 9" x49" tbl., 2 HP, 35.5" X, 12.5" Y, 16" Z, R-8, 60-4200 RPM
MachineStation | Lake Elsinore, CA
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Acra
Model: 2V
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Machine base, knee and table are cast iron ...more
Acra #AM-3SAC, Vertical Mill, 39.5" x 16.5" x 16" travel, 10" x 54" table, R8, 4200 RPM, 5 HP, 1-shot lube
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Acra
Model: AM-3SAC
ACRA AM-3SAC Vertical Milling Machine #8075 #1, Table Size: 10" x 54", Travels (X/Y/Z): 39.5" (Longitudinal) / 16.5" (Cross) / 16" (Knee), Spindle Taper: R8, Spindle Speeds: Up to 4,200 RPM (variable), Motor: 5 HP, Quill Travel: 5", Quill Feeds: 0.0015", 0.003", 0.006", Weight: 3,400 lbs., X-Axis Power Feed, One Shot ...more
Alliant #42S, vertical mill w/variable speed, 9" x42" table, chrome ways
Excell Technology | San Carlos, CA
Seller: Excell Technology
Location: San Carlos, CA
Mfr: Alliant
Model: 42S
Speeds 60- 4200 rpm2 Hp motorSpindle type R-89 x 42” tableIncludes:Chrome WaysThrough the spindle coolant attachmentStainless steel enclosure for core drillingW/6x 12 magnetic chuckW /Mitutoyo 2 Axis Digital readoutW/Servo power feed Longitudinal.
Get email updates for newly added Bed and Knee Milling Machines - Vertical
Bed and Knee Milling Machines - Vertical (also known as vertical milling machines) are machines that use a vertically oriented spindle to perform precision milling operations. Commonly used in industries like metalworking, automotive, and aerospace, they are ideal for tasks such as drilling, boring, and surface grinding. These machines are essential for creating detailed, high-precision parts and components.
ATrump #K3VL, vertical miller, 10" x50" table, 3 HP, 38.5" X, 15.75" Y, 16" Z, #A6551
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Atrump
Model: K3VL
Table Size 9" x 49" X Axis Travel STD.927mm (36-1/2”).OPT.970 mm (38-1/2”) Y Axis Travel 400mm (15-3/4”) Z Axis Travel 406mm (16”) Quill Diameter Ø86mm (3-3/8”) Quill Travel 125mm (4-7/8”) Quill Feed 0.0508mm, 0.1013 mm, 0.1524 mm (0.002”, 0.004”, 0.006”) Spindle Taper R8 OR N.S.T. #30 Spindle Speed ...more
Birmingham #BPV-3949-C, 9" x49" table, variable speed head, chromed ground quill, 60-4300 RPM, 3 HP, new, #SMBPV3949C
Sterling Machinery Exchange - New Mach. | South El Monte, CA
Seller: Sterling Machinery Exchange - New Mach.
Location: South El Monte, CA
Mfr: Birmingham
Model: BPV-3949-C
Table Size 9" x 49" T-Slot Number, Size 3, 5/8" Longitudinal Traverse Hand Only 35-1/2" Longitudinal Traverse Power Feed 33" Cross Travel 13-1/4" Vertical Knee Travel 16" Ram Travel 12" Quill Feed Speeds 0.0015" x 0.003" x 0.006" Quill Travel 5" Spindle Taper R-8 "Same As Bridgeport" Quill Diameter 3-3/8" Head Swivel ...more
Birmingham #BPV-949, vertical mill, 9" x49"tbl., 35.5"X, 33" Y, 13.25"Z, R-8, 2-Axis digital read out, table power feed, vise
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Birmingham
Model: BPV-949
Table Capacity 700 Lbs. Longitudinal Travel 35 1/2" Cross Travel 33" Vertical Knee Travel 13-1/4" Ram Travel 16" Quill Feed Speeds 12" Quill Travel 0.0015" x 0.003" x 0.006" WEIGHT 2,500 Lbs. Voltage 220v 3-Phase Dimension (L x D x H) 86" x 68" x 67" Spindle R8 s 2 Axis Digital Readout Table Power Feed One - Shot Lube.
Birmingham #XJ5523, vertical mill, 9" x49"tbl., 3 HP, 36" X, 15.75"Y, 18" Z, 60-4300 RPM, variable speed head, R-8, 2-Axis digital read out
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Birmingham
Model: XJ5523
Table Size 9" x 49" Table Capacity 700 Lbs. Table T-Slot Size 0.0629" x 3 Longitudinal Traverse Hand Only 36" Longitudinal Traverse Power Feed 32-1/4" Cross Travel 15-3/4" Vertical Travel 16" Ram Travel 18" Quill Travel 5" Spindle Taper R8 Quill Diameter 3.374" Head Swivel 90 Degress Ram Turret Swivel 360 Degress ...more
JUST ADDED!
Bridgeport #Series-1, vertical mill, 9" x 32" table, 60-4200 RPM, 1.875" spindle diameter, variable speed, step pulley
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES 1
JUST ADDED!
Bridgeport #Series-1 Milling Machine, 24" x16" x12" travel, 60-4200 RPM, 9" x42" table, 2 HP, 12" ram, 1-shot lube, w/ digital read out And Power Feed
GTH Used Machinery Intl | Pico Rivera, CA
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Bridgeport
Model: SERIES-1
Bridgeport #Series-1 variable speed, Milling Machine, 9" x 49" table, 2 HP, 4200 RPM, 220/440 V., digital read out, 6" vise
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Bridgeport
Model: SERIES-1
BRIDGEPORT SERIES 1 VARIABLE SPEED MILLING MACHINE #8117 #1, Table Size: 9" x 49", Quill Travel: 5", Collet Type: R8, Spindle Speeds: 60 - 4,200 RPM (Variable), Spindle Motor: 2 HP, Electrics: 220/440V, 3ph, Mitutoyo 2-Axis Digital Readout, Servo brand X-Axis Power Feed, Bridgeport Power Draw Bar.
Bridgeport #Series-1 variable speed, Milling Machine, 9" x 49" table, 2 HP, 4200 RPM, 220/440 V., digital read out, 6" vise
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Bridgeport
Model: SERIES-1
BRIDGEPORT SERIES 1 VARIABLE SPEED MILLING MACHINE #8116 #1, Table Size: 9" x 49", Quill Travel: 5", Collet Type: R8, Spindle Speeds: 60 - 4,200 RPM (Variable), Spindle Motor: 2 HP, Electrics: 220/440V, 3ph, Mitutoyo 2-Axis Digital Readout, Bridgeport X-Axis Power Feed, Bridgeport Power Draw Bar, 6" Mill Vise.
Bridgeport #Series-I, Vertical Knee Milling Machine, 42" x 9" table, 1 HP, 220/440 Volt
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Mira Loma, CA
Mfr: Bridgeport
Model: SERIES-I
BRIDGEPORT MILLING MACHINE IN GOOD CONDITION.
Bridgeport #Series-I, Vertical Mill, 9" x42" table, 1 HP, R8 taper, sloting head, 220/440 V.
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
Model: SERIES-I
BRIDGEPORT MILLING MACHINE IN GOOD CONDITION NO SLOTING HEAD!.
Bridgeport #Series-I, vertical mill, 9" x42"tbl., 2 HP, 220 V., 3-phase, 30" X, 60-4200 RPM, variable speed head, power feed, Heidenhein 2-Axis digital read out, scrapped table, one shot lube
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 42" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" Horsepower 2 H.P. Voltage 220 Volt, 3 Phase S: One Shot Lube Variable Speed ...more
Bridgeport #Series-I, vertical mill, 9" x42"tbl., 30" X, 60-4200 RPM, variable speed head, X-Axis table power feed, 2-Axis digital read out
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 42" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: Variable Speed Head 2 Axis Digital Readout System X Table Power Feed Y ...more
Bridgeport #Series-I, vertical mill, 9" x42"tbl., 30" X, 60-4200 RPM, variable speed head, power feed, collets, vise
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 42" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: Vise American Made Brand New Power Feed Collets.
Bridgeport #Series-I, vertical mill, 9" x42"tbl., 30" X, 60-4200 RPM, variable speed head, X-Axis rapid power feed, one shot lube
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 42" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: One Shot Lube Variable Speed Scraped And Chrome Ways X Axis Rapid Power ...more
Bridgeport #Series-I, vertical mill, 9" x42"tbl., 30" X, 60-4200 RPM, variable speed head, power feed, Acu-Rite II digital read out
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 42" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: Variable Speed Head 60-4200 Dial Change RPM Chrome And Scraped Ways Power ...more
Bridgeport #Series-I, vertical mill, 9" x48" tbl., 30" X, 60-4200 RPM, variable speed head, power feed, scraped & chrome ways, 6" vise, scraped table
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 48" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" Dimensions ( L x D x H ) 6' X 6' X 6'.5" WEIGHT 2000 LBS S: One Shot Lube Variable Speed Scraped And Chrome Ways Brand New Power Feed ...more
Bridgeport /Hardinge #Series-I, vertical mill, 9" x48"tbl., variable speed, scraped & chrome ways, Acu-Rite 3-Axis, 6" Kurt vise, one shot lube
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 48" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: One Shot Lube Variable Speed Scraped And Chrome Ways American Made 3 Axis ...more
Bridgeport #Series-I, vertical mill, 9" x48"tbl., 30" X, 60-4200 RPM, 1.875" spindle diameter, scraped & chrome ways, one shot lube
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Capacity 9" x 48" Longitudinal Travel 30'' Spindle Speeds 60 - 4,200 RPM Spindle Diameter 1.875" Maximum Load Capacity 750 Lbs. Speed Selector Variable Quill Feeds (3).0015",.003",.006" WEIGHT 2000 LBS Dimensions ( L x D x H ) 6' X 6' X 6'.5" S: One Shot Lube Variable Speed Scraped And Chrome Ways X Axis Rapid Power ...more
Bridgeport #Series-I, vertical mill, 9" x49" table, 36" long., 12" cross, 2 HP, 4200 RPM, R-8
Machinery Network Inc | Encino, CA
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Bridgeport
Model: SERIES-I
BRIDGEPORT SERIES I, Table-W. 9", Table-L. 49", Travel-Long. 36", Travel-Cross. 12", Power. 2 hp, RPM. 4,200 RPM, Taper. R-8, DRO, Power longitudinal feed.
JUST ADDED!
Bridgeport #Series-I, vertical mill, 9" x 48" table, 60-4200 RPM, one shot lube, X-Axis rapid power feed
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Bridgeport
Model: SERIES-I
Bridgeport #Series-I, vertical mill, 2 HP, variable speed
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
Model: SERIES-I
BRIDGEPORT VARI SPEED MILLING MACHINE.
Bridgeport #Series-I, step-head vertical mill
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
Model: SERIES-I
The Bridgeport 1 HP Step Head Vertical Milling Machine is a reliable and efficient machine tool designed for milling operations. With a spindle horsepower of 1 hp, this milling machine is capable of handling a variety of machining tasks with precision and accuracy. As a vertical milling machine, it offers a sturdy and ...more
JUST ADDED!
Bridgeport, Vertical Knee Mill, 9" x42" table, 30" X, 12" Y, 16" Z, 1 HP, digital read out, Southwestern ProtoTRAK MX3 CNC, 220 Volt, 3PH
Heavy Wall Consulting | Long Beach, CA
Seller: Heavy Wall Consulting
Location: Los Angeles, CA
Mfr: Bridgeport
Bridgeport Step Pulley Milling Machine with Southwestern ProtoTRAK MX3 Controller – AS-IS, Bridgeport Step Pulley Vertical Milling Machine, outfitted with a Southwestern Industries ProtoTRAK MX3 CNC Controller. This machine has not been in operation for a while, and the ProtoTRAK controller is not working. The ...more
JUST ADDED!
Bridgeport, Milling Machine, 2 HP, 24" x12" x16" trvls, 4200 RPM, 9" x42" table, Power Feed, Jenix digital read out, 1-shot lube, refurbished
GTH Used Machinery Intl | Pico Rivera, CA
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Bridgeport
Bridgeport, Vertical Mill, 9" x48"table, 1.5 HP, variable speed 60-4200 RPM, Newall digital read out, Riser Block
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Bridgeport
Bridgeport Variable Speed Vertical Mill #7567 #1, Table Size: 9" x 48", Table Longitudinal Travel: 36", Saddle Cross Travel: 12", Vertical Knee Travel: 16", Spindle Speeds (Variable): 60- 4,200 RPM, Spindle Nose: R- 8, Spindle Quill Travel: 5", Spindle Quill Feeds (3): 0.0015"- 0.003"- 0.006", Ram Travel: 12", Motor: ...more
Bridgeport, Vertical Mill, Variable Speed, 1.5 HP, J Head, 3k RPM, 36" table
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
Nice Bridgeport Mill!.
Bridgeport, Milling Machine, 30" x 12" x 16" travel, 4200 RPM, 9" x 48" table, w/ powerfeed & Jenex digital read out, 1 shot lube (2 available)
GTH Used Machinery Intl | Pico Rivera, CA
Seller: GTH Used Machinery Intl
Location: Pico Rivera, CA
Mfr: Bridgeport
Bridgeport, vertical mill, digital read out, 2 HP, 240 V.
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
It has a spindle horsepower of 2 hp and operates at 240 V. The model year is unknown, but the machine is all the necessary functions for efficient and effective milling. Don't miss this opportunity to own a top-of-the-line Bridgeport mill with DRO..
Bridgeport Textron vertical mill frame 145TY-4
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Bridgeport
#: 00050/TNT/..
Bridgeport, vertical mill, digital read out, power table, (2 available)
Bay Area CNC Machinery | Walnut Creek, CA
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Bridgeport
Make: Bridgeport, Type: Vertical Knee Mill, s: DRO (Digital Readout), Power Table Feed, Quantity Available: 2.
JUST ADDED!
Chevalier #FM-3KVH, vertical mill, 10" x50" table, 32-3/4" X, 16-1/8" Y, 3 HP, 60-4,500 RPM, R-8
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Chevalier
Model: FM-3KVH
CHEVALIER FM-3KVH Vertical Mill #8203 #1, TABLE SIZE: 10" x 50", X-TRAVEL: 32-3/4", Y-TRAVEL: 16-1/8", QUILL TRAVEL: 5", KNEE TRAVEL: 15-1/2", SPINDLE MOTOR: 3 HP, SPINDLE SPEED: 60 - 4500 RPM, SPINDLE TAPER: R-8, SPINDLE NOSE TO TABLE: 0" - 17-1/4", WEIGHT (APPROX.): 3,100 LBS., DIMENSIONS (APPROX.): 104" x 79" x ...more
Chevalier #FM-3KVH, Vert Mill, 10" x 50" table, w/ Prototrak KMX Control, 3 HP, 60-4500 RPM, R8
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Chevalier
Model: FM-3KVH
CHEVALIER FM-3KVH Vertical Mill w/ Prototrak KMX Control #8094 #1, TABLE SIZE: 10" x 50", X-TRAVEL: 32-3/4", Y-TRAVEL: 16-1/8", QUILL TRAVEL: 5", KNEE TRAVEL: 15-1/2", SPINDLE MOTOR: 3 HP, SPINDLE SPEED: 60 - 4500 RPM, SPINDLE TAPER: R-8, SPINDLE NOSE TO TABLE: 0" - 17-1/4", WEIGHT (APPROX.): 3,100 LBS., DIMENSIONS ...more
Comet #2V, vertical mill, 9" x49" tbl., 30" X, 12" Y, 16" Z, 60-4200 RPM, Acurite III 2 Axis digital read out, vise clamps, chrome ways
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Comet
Model: 2V
JUST ADDED!
Enco #100-1529, vari-speed vertical milling machine, w/ digital read out
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Enco
Model: 100-1529
ENCO VARI SPEED VERTICAL MILLING MACHINE W/ DRO MODEL 100 1529.
Enco #105-1280, Vertical Mill, 8-1/4" x 28" table, R8, 120-2500 RPM, 2 HP, 1986
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Enco
Model: 105-1280
Year: 1986
ENCO 105-1280 Vertical Mill/Drill #7850 #1, Table Size: 28 x 8-1/4, Longitudinal Travel: 18-1/8, Cross Travel: 6-1/4, Spindle Speeds: 120 2500 RPM, Spindle Taper: R8, Electrical: 230/460V(Wired 230)/3PH, Motor HP: 2.
Ex-Cell-O #602, Vertical Mill, 30" X, 16" Y, 16" Z, variable speed 85-4000 RPM, 9" X 42" table, R-8 nose, 12" ram, 2 HP, 220/440 V., 3ph
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Ex-Cell-O
Model: 602
Excello 602 Vertical Mill 9" x 42" #7771 #1, Table Size: 9" x 42", Longitudinal Table Travel: 30", Cross Saddle Travel: 16", Vertical Knee Travel: 16", Spindle Speeds (Variable): 85 - 4,000 RPM, Spindle Quill Travel: 6", Spindle Nose: R-8, Spindle Quill Feeds (3): 0.0015"- 0.003"- 0.006", Ram Travel: 12", Main Motor: ...more
Ex-cell-o #602, Vertical Mill, 30" x 16" x 16" travel, 85-4000 RPM, 12" ram travel, 2 HP, 9" X 42" table
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Ex-Cell-O
Model: 602
Excello 602 Vertical Mill 9" x 42" #7887 #1, Table Size: 9" x 42", Longitudinal Table Travel: 30", Cross Saddle Travel: 16", Vertical Knee Travel: 16", Spindle Speeds (Variable): 85 - 4,000 RPM, Spindle Quill Travel: 6", Spindle Nose: R-8, Spindle Quill Feeds (3): 0.0015"- 0.003"- 0.006", Ram Travel: 12", Main Motor: ...more
JUST ADDED!
Ex-Cell-O #602, vertical mill, 9" x 42" table, variable speed head, 30" X, 16" Y, 12" Z, 85-4000 RPM, R-8, one shot lube
Sterling Machinery Exchange | South El Monte, CA
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Ex-Cell-O
Model: 602
Frejoth #AM-2V, Vertical Mill, 12" ram, 3 HP, 9" x42" tbl, digital read out, variable speed head, 1-shot lube, 1998
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Frejoth
Model: AM-2V
Year: 1998
1998 Frejoth AM-2V Vertical Mill 9" x 42" #8049 #2, Table Size: 9" x 42", Table Longitudinal Travel: 30", Saddle Cross Travel: 12", Vertical Knee Travel: 16", Spindle Speeds (Variable): 60 - 4,200 RPM, Spindle Nose: R- 8, Spindle Quill Travel: 5", Spindle Quill Feeds (3): 0.0015"- 0.003"- 0.006", Ram Travel: 12" ...more
Frejoth (Bridgeport copy) milling machine w/ digital read out feed, 9" x42"table, 3 HP, R8 taper, 220V / 440V, impeccable
TNT Industrial | Orange, CA
Seller: TNT Industrial
Location: Orange, CA
Mfr: Frejoth
IMPECCABLE 3 HP VARI SPEED FREJOTH (BRIDGEPORT COPY) MILLING MACHINE W/ DRO FEED.
GMC #GMM-1050VT, 10" x50" tbl., 3 HP, 33" X, 12.5" Y, 16" Z, 60-4200 RPM, R8, Carmar 2-Axis digital read out, draw bar, one shot lube
Manufacturing Solutions | Santa Ana, CA
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: GMM-1050VT
10" x 50"730 lbs.33" (w/power feed: 28.75")12.5"16"1 11/16" to 17 5/8"8 1/4" to 17 1/4"R83 HP, 220V/3 Phase (440V upon request)60 - 4200 RPM3 3/8"5"12"5/8" x 3 slots90 Degrees45 Degrees2830 lbs.66 x 63 x 87".
GMC #GMM-1054VPKG, Vertical Mill, 10" x54"table, 3 HP, 2-Axis digital read out, 70-4300 RPM,new
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GMM-1054VPKG
New GMC 10" x 54" Vertical Mill | Metal Milling Machine with 2-Axis DRO SKU: GMM-1054VPKG, Our 10" x 54" metal milling machine aka vertical milling machines come fully a SINO digital readout and power feed. Our mill machines are rigid, made of Meehanite casting; hardened and grounded dovetail guideways. If you're ...more
GMC #GMM-949VPKG, vertical mill, 9" x49" tbl., 3 HP, 35.5" X, 12" Y, 17" Z, 70-4300 RPM, R8, Sino digital read out
Manufacturing Solutions | Santa Ana, CA
Seller: Manufacturing Solutions
Location: Santa Ana, CA
Mfr: Gmc
Model: GMM-949VPKG
Milling Machines9" x 49"650 lbs.35.5" (w/power feed: 31.5")12"17"R83 HP, 220V/10A (440V/5A upon request)70 - 4,300 RPM3 3/8"5"12"5/8" x 3 slots90 Degrees2,650 lbs..
GMC #GMM-949VPKG, Vertical Mill, 9" x49"table, 2-Axis digital read out,new
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: GMM-949VPKG
New GMC 9" x 49" Vertical Mill | Metal Milling Machine with 2-Axis DRO SKU: GMM-949VPKG, Our 9" x 49" metal milling machine aka vertical milling machines come fully a SINO digital readout and power feed. Our mill machines are rigid, made of Meehanite casting; hardened and grounded dovetail guideways. If you're ...more
Jet #JTM-4VS, vertical mill, 9" x49" table, 3 HP, 34" x 12" x 14.5" travel, variable speed, R-8, 60-4200 RPM, 5" stroke, 1-shot lube, Accurite digital read out
Wheeler Machinery Sales | Pomona, CA
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Jet
Model: JTM-4VS
JET JTM-4VS Vertical Mill #8076 #1, Style (Type): Variable Speed R8, Spindle Taper (In. x TPI): R-8, Table Size (L x W) (In.): 9 x 49, Quill Diameter (In.): 3-3/8, Number of Spindle Speeds: Variable, Range of Spindle Speeds (RPM): 60 - 4,200, Quill Down Feed Rates (IPR):.0015 -.003 -.006, Spindle Travel (In.): 5, Head ...more
