Buy or Sell Haas VF-2 Vertical CNC Machining Centers
The Haas VF-2 is a vertical CNC machining center designed for precision milling, drilling, and tapping of various materials. It features a robust design, high-speed spindle, and user-friendly controls for efficient production.
Check out the 30 Haas VF-2 listings available for sale below!
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 1000 RPM, 40 taper,Haas CNC Control,S/N 2857,1994
Smith Machinery Co | Ames, IA
Category: Vertical CNC Machining Centers
Seller: Smith Machinery Co
Location: Ames, IA
Mfr: Haas
Model: VF-2
Year: 1994
Table Size 36" x 14" Max Table Load 3000 pounds X-Axis Travel 30 inches Y-Axis Travel 16 inches Z-Axis Travel 20 inches Spindle Taper 40 Taper Rapid Traverse Rate (X,Y,Z) 1,000 RPM Feed Rate 500 IPM Motor 208/230 Volts, 3 Phase, 25 Amps Dimensions (Floor Space (LxWxH)) 93" X 88" 106" Machine Weight (Approx.) 8500 ...more
Featured
Haas #VF-2, vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 7500 RPM, 15 HP, 1994
Deal Makers Machinery | Thousand Oaks, CA
Category: Vertical CNC Machining Centers
Seller: Deal Makers Machinery
Location: Thousand Oaks, CA
Mfr: Haas
Model: VF-2
Year: 1994
1994 HAAS VF-2 VMC Price: $5,950 Subcategory: Vertical Machining Centers CNC X axis: 30" Y axis: 16" Year of Manufacture: 1994 Manufacturer: Haas Model: VF-2 Condition: Used, INDEXER, 40 TOOL HOLDERS, MANUALS, 7500 RPM, 15 HP, 30X16X20, 20 ATC, UNDER POWER & RUNNING.
Haas #VF-2, CNC vertical machining center, 30" X, 16" Y, 20" Z, 7500 RPM, 20 automatic tool changer, Cat 40, 1998
National Machinery Exchange | Newark, NJ
Category: Vertical CNC Machining Centers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Haas
Model: VF-2
Year: 1998
Manufacturer Haas, Model VF-2, Year 1998, Condition Used, Table Size 36"x14", Maximum Table Load 3,000 lbs, X-Axis Travel 30", Y-Axis Travel 16", Z-Axis Travel 20", Distance Spindle Nose to Table Top 4" - 24", Spindle Taper CAT 40, Spindle Speed 7,500 RPM, Spindle Motor 20 HP, Tool Magazine Capacity 20 Position ATC ...more
Haas #VF-2, CNC Vertical Machining Center, 3-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 8100 RPM, 40 Taper, 20 automatic tool changer, 1997
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 1997
Used Vertical Machining Center. s include 30" x-axis, 16" y-axis, 20" z-axis, 30 hp power, 8,100 RPM, 20-tool ATC, and 3-axis control., 1997 HAAS VF-2, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 8,100 RPM, # ATC. 20, Taper. 40, Table-W. 14", Table-L. 36", # Axis. 3, Control. CNC (HAAS).
Haas #VF-2, CNC Vertical Machining Center, 4-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 8100 RPM, 40 Taper, 20 automatic tool changer, 1998
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 1998
Vertical Machining Center with 4th Axis, used, featuring 30" x 16" x 20" travel, 30 hp, 8,100 RPM, 20-tool ATC, and 40 taper. Table dimensions: 14" x 36"., 1998 HAAS VF-2, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 8,100 RPM, # ATC. 20, Taper. 40, Table-W. 14", Table-L. 36", # Axis. 4, Control. CNC (HAAS).
Haas #VF-2, CNC Vertical Machining Center, 3-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 8100 RPM, 20 automatic tool changer, 2008
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 2008
2008 HAAS VF-2 Vertical Machining Center. s 30" x 16" x 20" travel, 30 hp, 8,100 RPM, 20-tool ATC, and 36" x 14" table., 2008 HAAS VF-2D, X. 30", Y. 16", Z. 20", Power. 20 hp, RPM. 10,000 RPM, # ATC. 24, Taper. CAT-40, Table-W. 14", Table-L. 36", Control. CNC (HAAS).
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, 30 HP, 14" x36"tbl., 2012
JYC Machinery | Aventura, FL
Category: Vertical CNC Machining Centers
Seller: JYC Machinery
Location: Aventura, FL
Mfr: Haas
Model: VF-2
Year: 2012
, 40 taper, 30 hp (22.4 kW) vector drive, 8100 rpm, inline direct drive, 20-station carousel tool changer, 1000 ipm (25.4 m/min) rapids, 1 MB program memory, 15" color LCD monitor, USB port,memory lock keyswitch, rigid tapping and 55-gallon (208 liter) flood coolant system. Side-Mount Tool Changer, 40 Taper, 24+ 1 ...more
Haas #VF-2, CNC Vertical Machining Center, 3-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 8100 RPM, 20 automatic tool changer, 2014
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 2014
2014 HAAS VF-2 Vertical Machining Center, used condition. : X 30", Y 16", Z 20", 30 hp, 8,100 RPM, ATC 20, Table 14" x 36"., 2014 HAAS VF-2, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 8,100 RPM, # ATC. 20, Table-W. 14", Table-L. 36", # Axis. 3, Control. CNC (HAAS).
Haas #VF-2, CNC Vertical Machining Center, 3-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 8100 RPM, CT40 Taper, 20 automatic tool changer, 2015
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 2015
Vertical Machining Center, used. s include a Cat 40 spindle, 30HP, 20 ATC, and capabilities like high-speed machining and rigid tapping. : X 30", Y 16", Z 20", 8100 RPM. Table: 14"x36", 3-axis, 4th axis ready., 2015 HAAS VF-2, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 8,100 RPM, # ATC. 20, Taper. CT 40, Table-W. 14" ...more
Haas #VF-2, CNC vertical machining center, 30" X, 16" Y, 20" Z, 8100 RPM, 20 automatic tool changer,CT40,chip conveyor-auger style, 2019
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: VF-2
Year: 2019
2019 HAAS VF-2, X Axis Travel. 30", Y Axis Travel. 16", Z Axis Travel. 20", Spindle Motor. 30 hp, Spindle Speed. 8,100 RPM, ATC Capacity. 20, Spindle Taper. CT40, Cut Hours. 2,138 hr., HAAS CNC Control, Chip Conveyor-Auger Style, Programmable Coolant Nozzle, Visual Part Programming System.
Haas #VF-2, CNC Vertical Machining Center, 3-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 10000 RPM, CAT40 Taper, 20 automatic tool changer, 2013
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 2013
Used 2013 HAAS VF-2 Vertical Machining Center. It s a 30 hp motor, 10,000 RPM spindle, and a 20-tool ATC. Dimensions: X-axis 30", Y-axis 16", Z-axis 20"., 2013 HAAS VF-2, X. 30", Y. 16", Z. 20", Power. 30 hp, RPM. 10,000 RPM, # ATC. 20, Taper. CAT 40, Table-W. 14", Table-L. 36", # Axis. 3, Control. CNC (HAAS).
Haas #VF-2, CNC Vertical Machining Center, 4-Axis, 30" X, 16" Y, 20" Z, 14" x 36" Table, 30 HP, 10000 RPM, 40 Taper, 20 automatic tool changer, 2023
Toolquip Inc | Lebanon, OH
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Haas
Model: VF-2
Year: 2023
Vertical Machining Center, used. : X 30", Y 16", Z 20", Power 30 hp, RPM 10,000, 20 ATC, Taper 40, Table 14" x 36", 4 Axis. 4th Axis Drive, HRT-210 Rotary, High-Speed Machining, Through Spindle Coolant, and more., SPINDLE NOSE TO TABLE MAX: 24, SPINDLE NOSE TO TABLE MIN: 4, TOOL CHANGER: 20+1 CAROUSEL, RAPID RATE ALL ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, 5-Axis, 30" X, 16" Y, 20" Z, 20 automatic tool changer, 30000 RPM, WIPS, TR160 trunnion table, 2011
Machinery Network Inc | Encino, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: VF-2
Year: 2011
2011 HAAS VF-2, X Axis Travel. 30", Y Axis Travel. 16", Z Axis Travel. 20", Spindle Motor. 30 hp, Spindle Speed. 30,000 RPM, ATC Capacity. 20, Spindle Taper. BT-30, # Axis. 5, Table-W. 14", Table-L. 36", HAAS CNC Control, Wireless Intuitive Probing (WIPS), Programmable Coolant Nozzle, Wired for 4th & 5th Axis ...more
Haas #VF-2, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, 20 HP, chip auger, thru spindle coolant, 2014
Machinery Resources Intl | Simi Valley, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: VF-2
Year: 2014
, TRAVELS, -X AXIS: 30", -Y AXIS: 16", -Z AXIS: 20", MAX TABLE LOAD: 3,000 LBS, SPINDLE MOTOR: 20 HP, SPINDLE SPEED: 8,100 RPM, SPINDLE TAPER: 40 CT, TOOL CHANGER: 24 ATC, MAX TORQUE: 90 FT-LBF, MAX TOOL DIAMETER: 3.5", MAX TOOL WEIGHT: 12 LB, TOOL-TO-TOOL (AVG): 4.2 S, CHIP-TO-CHIP (AVG): 4.5 S, TABLE SIZE: 36" X ...more
Haas #VF-2, CNC vertical machining center, 24+1 side mount tool changer, 30" X, 16" Y, 20" Z, 10000 RPM, #40, 20 HP, 14" x36" tbl., chip auger
Machinery Resources Intl | Simi Valley, CA
Category: Vertical CNC Machining Centers
Seller: Machinery Resources Intl
Location: Simi Valley, CA
Mfr: Haas
Model: VF-2
Year: 2004
2004 HAAS VF-2 Vertical Machining Center available, featuring a 30"x16"x20" travel, 20 hp, 10,000 RPM, CT 40 taper, 24+1 SMTC, programmable coolant, and chip auger., Power 20 HP, RPM 10,000 RPM, # ATC 24+1 SIDE MOUNT, Table-W 14", Table-L 36", Taper CT 40.
Haas #VF-2, CNC vertical machining center, 24 automatic tool changer, 30" X, 16" Y, 20" Z, 30000 RPM, BT30, 30 HP, Midaco A30SD pallet changer, 2011
Global Machine Brokers LLC | Guilford, CT
Category: Vertical CNC Machining Centers
Seller: Global Machine Brokers LLC
Location: Guilford, CT
Mfr: Haas
Model: VF-2
Year: 2011
Haas #VF-2, CNC Vertical Machining Center, 30" X, 16" Y, 20" Z, 20 HP, 35000 RPM, 24-Station automatic tool changer, 100 psi, 4 scfm, 360-480 V., 2011
MachineStation | Lake Elsinore, CA
Category: Vertical CNC Machining Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Haas
Model: VF-2
Year: 2011
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., Replacement Cost Over $123,000 with Similar Options ...more
Haas #VF-2, CNC vertical machining center, Haas NextGen Control, 30" X, 16" Y, 20" Z, 8100 RPM, 30 automatic tool changer, Cat 40, 300 psi thru spindle coolant, 2018
Equipment Hub | Decatur, GA
Category: Vertical CNC Machining Centers
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Haas
Model: VF-2
Year: 2018
Stock #: 113260005, Brand: Haas, Model: VF-2, Year: 2018 (Manufactured June 2018), Condition: Like New (Original Owner), Hours: Approx. 2,500 Total / 1,500 Feed Cutting Hours (as of December 2025), Approx. Shipping Weight: Not Specified (Typical ~8,000-9,000 LBS for VF-2 models), Table Length: 36" (914.4 mm) ...more
Haas #VF-2, CNC 4-Axis Vertical Machining Center, 30" X, 16" Y, 20" Z, 30 HP, 8100 RPM, 21-tool, 2015
CNC Exchange div. Gray Machinery Co. | Prospect Heights, IL
Category: Vertical CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Haas
Model: VF-2
Year: 2015
For sale: 2015 Haas VF-2 CNC 4-Axis Vertical Machining Center. Haas CNC controls, 21 position tool changer, Renishaw probe, chip conveyor, and more. s 30.0 hp spindle with 8100 rpm max speed. Dimensions: 101" x 99" x 101"., TRAVELS S.A.E METRIC, X Axis 30.0 in 762 mm, Y Axis 16.0 in 406 mm, Z Axis 20.0 in 508 mm ...more
Haas #VF-2, CNC vertical machining center, 30" X, 16" Y, 20" Z, 12000 RPM, Renishaw probe, coolant thru spindle, chip auger, 2012
Franke CNC, LLC | Germantown, WI
Category: Vertical CNC Machining Centers
Seller: Franke CNC, LLC
Location: Germantown, WI
Mfr: Haas
Model: VF-2
Year: 2012
Table 36" x 14", Travels 30" x 16" x 20", Spindle Speed 12,000 rpm, 30 ATC, Coolant Thru Spindle (300 PSI), Renishaw Probe, Touch type tool length measuring on table, Chip Auger.
Haas #VF-2, CNC vertical machining center, 30" X, 16" Y, 20" Z, 30000 RPM, CAT30 taper, Haas CNC, 5-axis Trunnion Table, 2006
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2006
Make: Haas, Model: VF-2, Year: 2006, Machine Location: Pennsylvania, X-Axis Travel: 30″, Y-Axis Travel: 16″, Z-Axis Travel: 20″, Table Size: 36″ x 14″, Maximum Weight on Table: 3500 lbs (1588 kg), Spindle Nose to Table Surface: 4″ – 24″, X/Y-Axis Rapid Traverse Rates: ...more
Haas #VF-2, vertical machining center, 30" X, 16" Y, 20" Z, 36" x14"tbl., 4-Axis, Midaco pallet changer, Kurt vises, mist collector, 1994
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 1994
Make: Haas, Model: VF-2, Year: 1994, Machine Location: Michigan, X-Axis Travel: 30”, Y-Axis Travel: 16”, Z-Axis Travel: 20, Table Size: 36” x 14”, Spindle Speed: 0 – 7,500 RPM, Spindle Taper: Cat 40, Spindle Motor: 15 HP, Auto Tool Changer: 20 Positions, Electrical Requirements: 208/230 ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, Probe, 8000 RPM, 2021
Performance Machine Tools | Fremont, CA
Category: Vertical CNC Machining Centers
Seller: Performance Machine Tools
Location: Fremont, CA
Mfr: Haas
Model: VF-2
Year: 2021
Haas #VF-2, CNC vertical machining center, 2018
Bay Area CNC Machinery | Walnut Creek, CA
Category: Vertical CNC Machining Centers
Seller: Bay Area CNC Machinery
Location: Walnut Creek, CA
Mfr: Haas
Model: VF-2
Year: 2018
Condition UsedStock Number 47518888156.
JUST ADDED!
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 20" X, 16" Y, 20" Z, 8100 RPM, #40, 4-Axis rotary table, 2015
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2015
Haas 4th Axis Rotary, The Haas VF-1 Vertical Machining Center (2015) is a compact, high-performance CNC solution for precision milling, drilling, tapping, and boring. Ideal for automotive, aerospace, and manufacturing, it s rigid tapping for superior thread quality. Its small footprint makes it perfect for job shops ...more
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, rigid tap, 2015
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2015
Low hrs| Probe, Used Haas VF-2 Vertical Machining Center 2015 with CNC Haas Control. Ideal for industries like aerospace, medical, and automotive. Perfect for high-speed milling, drilling, tapping, and precision machining. Ideal for high-volume production with fast tool changes and high-tolerance parts., X-Axis ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, 20 automatic tool changer, 30" X, 16" Y, 20" Z, 8100 RPM, #40, 4-Axis rotary table, rigid tap, 2016
Machinery Marketing International | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Machinery Marketing International
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2016
Haas 4th Axis Rotary, Enhance shop productivity with this Haas VF-2 Vertical Machining Center (2016). Featuring a reliable 40-taper spindle and user-friendly Haas control, it delivers precision milling for prototyping and production. Ideal for aluminum, steel, titanium, and plastics, it excels in aerospace ...more
Haas #VF-2, vertical machining center, 36" X, 14" Y, 20" Z, 8100 RPM, 30 HP, 20 automatic tool changer, 4th & thru spindle coolant Ready, probe, auger, rigid tap, 14" x 36" table, 2013
Clark Machinery Sales LLC | Hunt Valley, MD
Category: Vertical CNC Machining Centers
Seller: Clark Machinery Sales LLC
Location: Hunt Valley, MD
Mfr: Haas
Model: VF-2
Year: 2013
2013 HAAS VF-2, TABLE LENGTH. 36", TABLE WIDTH. 14", X-AXIS TRAVEL. 30", Y-AXIS TRAVEL. 16", Z-AXIS TRAVEL. 20", SPINDLE SPEED. 8,100 RPM, SPINDLE MOTOR. 30 hp, SPINDLE TAPER. CAT 40, TOOL CAPACITY (ATC). 20, RENISHAW WIRELESS INTUITIVE PROBING SYSTEM (WIPS), THROUGH-SPINDLE COOLANT READY, 4TH AXIS DRIVE & WIRING ...more
JUST ADDED!
Haas #VF-2, CNC vertical machining center, Probing, 2-Speed Gear Box, 24 automatic tool changer, 4th Axis Drive, High Speed Machining
Machinesused.com | Minneapolis, MN
Category: Vertical CNC Machining Centers
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Haas
Model: VF-2
Year: 2009
The Haas VF2 CNC Vertical Machining Center is one of the most widely trusted and versatile VMCs in modern machining environments. Known for its rigid construction, userfriendly Haas control, and reliable performance, the VF2 is an ideal solution for job shops, contract manufacturers, and production facilities ...more
JUST ADDED!
Haas #VF-2, vertical machining center, 30" X, 16" Y, 20" Z, 12000 RPM, 36" x14" table, 30 automatic tool changer, WIPS, Rigid Tapping, Chip Auger, 2022
Revelation Machinery | Chicago, IL
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Haas
Model: VF-2
Year: 2022
Make: HAAS, Model: VF2, Year: 2022, Machine Location: Upon Request, X-Axis Travel: 30″, Y-Axis Travel: 16″, Z-Axis Travel: 20″, Table Size: 36.0″ x 14.0″, Max Table Load: 3,000 lbs, Spindle Speed: 12,00 RPM., Spindle Power: 30 hp, Spindle Taper: CT40, Rapid Traverse Rates: 1,000 ipm, Max ...more
