For Sale by JM Industrial LLC
Surplus Record Dealer Since 1993
Sheldon Sharp
304-27...> Show Seller's Phone Number 304-273-0795 Let the seller know you found their listing on Surplus Record!
Description
Used 1 Cu/Ft Double Cone Lab Blender - Stainless Steel
Stainless steel mixing chamber with welded-on carbon steel flanges. The straight section is 14" X 5" long. The assembled length of the chamber is 15". The three sections and end covers are clamped. Installed intensifier bar with blades chain-driven by a 1/2HP, 1725RPM, 115/230 volt, single phase AC drive. The blender is chain-driven by a 1/6HP, 115 volt split phase gearmotor. Shipping Info: 48" X 40" X 55" 341LBS
Stainless steel mixing chamber with welded-on carbon steel flanges. The straight section is 14" X 5" long. The assembled length of the chamber is 15". The three sections and end covers are clamped. Installed intensifier bar with blades chain-driven by a 1/2HP, 1725RPM, 115/230 volt, single phase AC drive. The blender is chain-driven by a 1/6HP, 115 volt split phase gearmotor. Shipping Info: 48" X 40" X 55" 341LBS
Inquire Further with JM Industrial LLC!
Buyers Who Viewed This Listing Also Viewed …
1 cu.ft. Patterson, Conical Mixer, Stainless Steel, 1HP, 3/60/230/460V, 1725 RPM
Category: Cone Mixers and Blenders
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Patterson
Patterson-Kelley Conical Mixer. Stainless steel, 1 cubic foot capacity mixer a 1 HP motor operating at 1725 RPM, 230/460 V. Serial number not available. Designed for precise blending., HP: 1, Cubic Feet: 1, Materials of Construction: Stainless Steel, Basis: FOB.
1 cu.ft. Gemco, mixer powder double cone, 316 Stainless Steel, 11-1/2" hinged cover charge port with a 4" dia butterfly discharge valve
Category: Cone Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Gemco
1 cu ft working capacity, rated for a bulk density on average of 65 lbs working capacity per cu ft. 316 S/S double cone tumble mixer, has a liquid solids bar, 11 1/2" hinged cover charge port with a 4"diameter butterfly valve discharge. Nema-7 control panel including motor starter, start/stop push buttons ...more
1 cu.ft. Gemco, Stainless Steel, slant cone tumble mixer, 11" ID infeed & discharge ports, clamp down covers
Category: Cone Mixers and Blenders
Seller: Frain Industries
Location: Carol Stream, IL
Mfr: Gemco
Gemco Model 1 Cubic Foot, stainless steel, slant cone tumble mixer with pounds of product per hour – depending on materials and application. Mixing cone dimensions of: 16" in Length and 16" in width. 11" ID in feed and discharge ports with clamp down covers and intensifier bar. Fill level: 1.0 ...more
0.5 cu.ft. Gemco, Stainless Steel Double Cone Blender
Category: Cone Mixers and Blenders
Seller: Perry Videx LLC
Location: Hainesport, NJ
Mfr: Gemco
Used 0.5 Cubic Foot Stainless Steel Double Cone Blender, Manufacturer: Gemco, Capacity: 0.5 cubic foot, Serial: LB-88970, Material of construction: stainless steel, GEMCO 0.5 Cubic Foot, Capacity. 0.5 ft, Material of construction. stainless steel, Type (Double Cone/Twin Shell). double cone, Material Of Covers. ...more
1.4 cu.ft. Winkworth #DC40, Double Cone Blender, Stainless Steel, 40 liter, lab scale, enclosure, 1990
Category: Cone Mixers and Blenders
Seller: Federal Equipment Company
Location: Cleveland, OH
Year: 1990
Used 40 liter (1.4 cu. ft.) Winkworth double cone blender, model DC40, stainless steel construction, lab scale, with drive, stainless steel enclosure, and controls, serial no. 5518, new 1990.
