1 / 10
Click to zoom in
1 / 10
For Sale by HGR24
Surplus Record Dealer Since 2012
Location: Euclid, OH
Contact Sales Dept.
Phone Number: 216...> Show Phone Number 216-485-2976
Let the seller know you found their listing on Surplus Record!
$11,999 USD
Finance for as low as $243/mth 
Description
| Inventory No. | 0226-181-0002 |
| Manufacturer | Nakamura-tome |
| Model No. | SC-300 |
| Name | CNC Lathe |
| Arrival Date | 04-10-2026 |
| Dimensions L x W x H (inches) | Unavailable |
| Electrical | 3/60/220 |
| Weight (lb.) | 9870 |
| Category | CNC |
| Condition | Used |
| Available Quantity | 1 |
| Item Details | 105 A, 40 Kva, 24 Vdc, Fanuc Series 21-t Controls, 10" 3 Jaw Chuck, Tail Stock, Donaldson Dust Collector, 12 Spot Tool Changer, Foot Switches X2, (9870#) 137x82x97, (1330#) 155x39x65, *contains 2 Pieces |
Inquire Further with HGR24!
Buyers Who Viewed This Listing Also Viewed:
Nakamura #SC-300, CNC Turning Center, 13.77" max. turning diameter, 23.62" max. turning length, 22" swing over bed, 28" between centers, 12-station, 1998
Category: CNC Lathes and Turning Centers
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Nakamura
Model: SC-300
Year: 1998
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 21-T CNC Control, 12 Station Automatic ...more
JUST ADDED!
Daewoo Doosan #Lynx-2100A, CNC Lathe, 23" swing, 13.7" turning diameter, 6" 3-jaw chuck, 20 HP, 6000 RPM, 12-position turret, Fanuc 0iTD CNC, 2023
Category: CNC Lathes and Turning Centers
Seller: Star Equipment Co., Inc.
Location: Utica, MI
Mfr: Daewoo Doosan
Model: LYNX 2100A
Year: 2023
6" DIA CHUCK, 15-20 HP SPINDLE DRIVE MOTOR, MAX CUTTING LENGTH 13", X-AXIS TRAVEL 8.1", BAR CAPACITY 2.0", SPINDLE SPEED 6000 RPM MAX., RAPID TRAVERSE RATE X-AXIS 1,181 in/min., RAPID TRAVERSE RATE Z-AXIS 1,181 in/min., TURRET POSITIONS 12, TOOL PRE-SET ARM, FANUC 0iTD CONTROL, Dimensions 102" x 63" x 66", Weight 7500 ...more
JUST ADDED!
Mazak #M4-1500, CNC Lathe & Turning Center, 24" swing, 68" centers, 13" 3-jaw chuck, dual turret configuration, Fanuc 6T control, 1980
Category: CNC Lathes and Turning Centers
Seller: Miedema Auctioneering & Appraisals Inc
Location: Gladstone, MI
Mfr: Mazak
Model: M4-1500
Year: 1980
(1) 1980 Mazak, model M4 1500, CNC lathe with a Fanuc System 6T CNC controls, 24" swing, 68" between centers, 13" diameter 3-jaw chuck, 6-position horizontal tool turret, 8-position hydraulic power vertical tool turret, hydraulic power tail stock, steady rest, and remote hydraulic power supply, winning bidder ...more
JUST ADDED!
Daewoo Doosan #Puma-250B, CNC lathe, 10" 3-jaw chuck, 1-1/2" bore, tailstock, 2000
Category: CNC Lathes and Turning Centers
Seller: HGR24
Location: Euclid, OH
Mfr: Daewoo Doosan
Model: PUMA 250B
Year: 2000
Inventory No. 0426-048-0001 Manufacturer Daewood Model No. PUMA 250B Name CNC Lathe Arrival Date 05-04-2026 Dimensions L x W x H (inches) 227 x 75 x 74 Electrical 3/50/60/200/220 Weight (lb.) 13265 Category CNC Condition Used Available Quantity 1 Serial No. PM250762 Make Year 2000 Item 37.31 Kva, 18.5 Kw, 99.22 A, 10 ...more
JUST ADDED!
Haas #ST-20, CNC Lathe, 8.4" X, 22.5" Z, 21" max. part swing, 11.75" cutting diameter, 8" 3-jaw chuck, 20 HP, 4000 RPM, 220 Volt, 3PH, 2018
Category: CNC Lathes and Turning Centers
Seller: Trader Machinery Inc
Location: Concord, ON
Mfr: Haas
Model: ST-20
Year: 2018
21"11.75"22.5"2.5"8.4"22.5"945 IPM20 HP3.5"4000 RPM220V/3/60472 IPM, 472 IPM, 945 IPM5 HP+/- 0.01.
