Manufacturer: Mori Seiki
Model: NH-4000DCG
Year: 2008
Automatic Tool Changer: 60
RPM: 14000
Stock # 113605
1 / 10
Click to zoom in
1 / 10
For Sale by MachineStation
Surplus Record Dealer Since 2022
Location: Lake Elsinore, CA
Contact Sales Dept.
Phone Number: 909...> Show Phone Number 909-919-9600
Let the seller know you found their listing on Surplus Record!
Description
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Mori Seiki MSX-701III (Fanuc) CNC Control
16,586 Hours Cutting Time
Pallet Seat Detection
Spindle Orientation
Rigid Tapping
Fast Rapid Traverse Rate
Coolant System
Travels:
X Axis: 22.0"
Y Axis: 22.0"
Z Axis: 24.8"
Distance From Pallet Surface to Spindle Center: 3.1" 25.2"
Table:
Length: 15.7"
Width: 15.7"
Max Weight on Table: 880 lbs
Max Workpiece Swing Diameter: 24.8"
Max Workpiece Height: 35.4"
Index Time: 8 seconds 90°
Spindle:
Taper Size: BT-40
Max. Speed: 14,000 RPM
Spidle Motor Power: 30 HP
Feed rates:
Rapid Traverse Rate X,Y,Z Axis : 1968 Inch Per Minute
Cutting Feedrate X,Y,Z Axis : 1968 Inch Per Minute
Tool changer:
Capacity: 60 Tools
Max Tool Diameter (without adjacent tools): 5.11"
Max Tool Diameter (with adjacent tools): 2.70"
Max Tool Length: 15.7"
Max Tool Weight: 17.6 lbs.
Tool to Tool Change Time: 0.9 Second
General:
Air Required: 90 psi, 4 scfm
Power: 40 kva / 220v / 3-Phase
Overall Dimensions: 157.6" X 94.4" x 106.7" High
Weight: 21,605 lbs. Approx.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Mori Seiki MSX-701III (Fanuc) CNC Control
16,586 Hours Cutting Time
Pallet Seat Detection
Spindle Orientation
Rigid Tapping
Fast Rapid Traverse Rate
Coolant System
Travels:
X Axis: 22.0"
Y Axis: 22.0"
Z Axis: 24.8"
Distance From Pallet Surface to Spindle Center: 3.1" 25.2"
Table:
Length: 15.7"
Width: 15.7"
Max Weight on Table: 880 lbs
Max Workpiece Swing Diameter: 24.8"
Max Workpiece Height: 35.4"
Index Time: 8 seconds 90°
Spindle:
Taper Size: BT-40
Max. Speed: 14,000 RPM
Spidle Motor Power: 30 HP
Feed rates:
Rapid Traverse Rate X,Y,Z Axis : 1968 Inch Per Minute
Cutting Feedrate X,Y,Z Axis : 1968 Inch Per Minute
Tool changer:
Capacity: 60 Tools
Max Tool Diameter (without adjacent tools): 5.11"
Max Tool Diameter (with adjacent tools): 2.70"
Max Tool Length: 15.7"
Max Tool Weight: 17.6 lbs.
Tool to Tool Change Time: 0.9 Second
General:
Air Required: 90 psi, 4 scfm
Power: 40 kva / 220v / 3-Phase
Overall Dimensions: 157.6" X 94.4" x 106.7" High
Weight: 21,605 lbs. Approx.
Get Your Price from MachineStation!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
Mori Seiki #NH-4000DCG, CNC horizontal machining center, 40 automatic tool changer, 22" X, 22" Y, 24.8" Z, 14000 RPM, #40, 25 HP, MSX-501III w/ MAPPS Control, chip conveyor, 2006
Category: Horizontal CNC Machining Centers
Seller: Protech Machine Tool Sales
Location: Anaheim, CA
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2006
2006 MORI SEIKI NH-4000 DCG, X Axis Travel 22, Y Axis Travel 22, Z Axis Travel 24.8, Pallet Surface to Spindle Center 3.1-25.2, Pallet Center to Spindle Gauge Plane 3.9-28.7, Pallet Size 15.7x15.7, Number of Pallets 2, Max Pallet Load 880 LBS, Pallet Index Time 1.3 Sec, Spindle Motor 25 HP, Speed 14,000 RPM, Spindle ...more
JUST ADDED!
Mori Seiki #NH-4000DCG, CNC horizontal machining center, 180 automatic tool changer, 22" X, 22" Y, 24" Z, 14000 RPM, CT40, 25 HP, 6-pallet APC, 4th Axis, 2010
Category: Horizontal CNC Machining Centers
Seller: ACT Machinery
Location: Fullerton, CA
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2010
, CNC Control, yes, Type of CNC Control, Fanuc MSX-701 III, # Axis, 4, Pallet-W, 15.7 inches, Pallet-L, 15.7 inches, Pallet Capacity, 881 pounds, X, 22 inches, Y, 22 inches, Z, 24 inches, Spindle Speed, 14,000 RPM, Main Motor, 25-HP, Spindle Taper, 40 Taper, Tool Changer Capacity, 180, Coolant Through Spindle, yes ...more
Mori Seiki #NH-4000DCG, 15.7" x 15.75" pallet, 24.8" X, 24.8" Y, 24.8" Z, 14000 RPM, 60 automatic tool changer, Cat 40, 2005
Category: Horizontal CNC Machining Centers
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2005
Used Mori Seiki NH4000 DCG (2005) CNC Horizontal Machining Center for Sale. This machine has a 400 mm pallet measuring 15.75″ x 15.75″, with 1 degree pallet indexing, and travels of 24.8″ in X, Y, and Z. The spindle turns to 14,000 RPM with a CAT 40 taper, and the 60-station ATC handles tool changes. ...more
Mori Seiki #NH-4000DCG, 4-Axis Horizontal Machining Center, 22" X, 22.5" Y, 24.8" Z, 15.75" pallet, 25 HP, 14,000 RPM, 40 automatic tool changer, CAT 40, MSX-701III control, 2008
Category: Horizontal CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2008
Used Horizontal Machining Center. s: 22"x22.5"x24.8" axes, 25 hp, 14,000 RPM, CAT 40 taper, 15.7"x15.7" pallets. Includes MSX-701III Control, chip conveyor, tool setter, spindle chiller, rotary table, and tombstone., 2008 MORI SEIKI NH4000 DCG, X. 22", Y. 22.5", Z. 24.8", Power. 25 hp, RPM. 14,000 RPM, # ATC. 40 ...more
Mori Seiki #NH-4000DCG, 4-Axis CNC Horizontal Machining Center, 22" X, 22" Y, 24.8" Z, 5.51" max. tool diameter, 24.8" swing diameter, 25 HP, 14,000 RPM, 120 automatic tool changer, Mori Fanuc MSX-501 III CNC, 2008
Category: Horizontal CNC Machining Centers
Seller: CNC Exchange div. Gray Machinery Co.
Location: Prospect Heights, IL
Mfr: Mori Seiki
Model: NH-4000DCG
Year: 2008
2008 Mori Seiki NH4000DCG 4-Axis CNC Horizontal Machining Center with dual pallet changer, 14,000 RPM spindle, 120 station ATC, and more. Includes spare spindle and 30 tool holders. Machine dimensions: 155"x98"x110", weight: 22,000 lbs., X & Y Axis Travel 22", Z-Axis Travel 24.8", Spindle to pallet distance 3.1" - ...more
