1 / 10
Click to zoom in
1 / 10
For Sale by ESS Industrial
Surplus Record Dealer Since 2025
Location: Woodruff, SC
Contact Scottie Epps
Phone Number: 864...> Show Phone Number 864-651-7934
Let the seller know you found their listing on Surplus Record!
$23,000 USD
Finance for as low as $466/mth 
Description
SPECS:
Model: TL-3W
Serial Number: 3083002
Year: 2008 (07/2008)
Control: Haas Classic CNC Control (ColdFire processor generation)
Electrical
Voltage: 208/230 VAC
Phase: 3-Phase
Frequency: 50/60 Hz
Full Load Current: 30 A
Largest Load: 70 A
Capacity & Travels (factory design specifications)
Maximum Swing Over Bed: approx. 20"
Maximum Swing Over Cross Slide: approx. 11"
Distance Between Centers: approx. 60" (wide-bed TL-3W configuration)
Spindle Bore: approx. 3.5"
Bar Capacity: approx. 3.0"
Spindle & Performance
Spindle Speed Range: up to approx. 1,800 RPM
Spindle Nose: A2-8
Chuck Size: typically 10"12" (varies with setup)
Axes & Motion
X-Axis Travel: approx. 8"
Z-Axis Travel: approx. 60"
Manual Electronic Handwheels for toolroom operation
Length: ~124 in (10.3 ft)
Width: ~67 in (5.6 ft)
Height: ~74 in (6.2 ft)
Approx 6,000 lbs
HAAS TL-3W used CNC & Metalworking Equipment available. Ideal for precise machining tasks. Quality and performance align with professional standards. Don't miss this opportunity to enhance your production capabilities.
HAAS TL-3W
Model: TL-3W
Serial Number: 3083002
Year: 2008 (07/2008)
Control: Haas Classic CNC Control (ColdFire processor generation)
Electrical
Voltage: 208/230 VAC
Phase: 3-Phase
Frequency: 50/60 Hz
Full Load Current: 30 A
Largest Load: 70 A
Capacity & Travels (factory design specifications)
Maximum Swing Over Bed: approx. 20"
Maximum Swing Over Cross Slide: approx. 11"
Distance Between Centers: approx. 60" (wide-bed TL-3W configuration)
Spindle Bore: approx. 3.5"
Bar Capacity: approx. 3.0"
Spindle & Performance
Spindle Speed Range: up to approx. 1,800 RPM
Spindle Nose: A2-8
Chuck Size: typically 10"12" (varies with setup)
Axes & Motion
X-Axis Travel: approx. 8"
Z-Axis Travel: approx. 60"
Manual Electronic Handwheels for toolroom operation
Length: ~124 in (10.3 ft)
Width: ~67 in (5.6 ft)
Height: ~74 in (6.2 ft)
Approx 6,000 lbs
HAAS TL-3W used CNC & Metalworking Equipment available. Ideal for precise machining tasks. Quality and performance align with professional standards. Don't miss this opportunity to enhance your production capabilities.
HAAS TL-3W
Inquire Further with ESS Industrial!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
9" Feeler #FTS-27-Series-II, second operation lathe, variable speed, 5C Collet, cross slide & bed turret, 1985
Category: Precision and Second Operation Lathes
Seller: Machinery Values Inc
Location: Harrison, NJ
Mfr: Feeler
Model: FTS-27-SERIES-II
Year: 1985
FEELER SECOND OPERATION LATHE MODEL: FTS-27 SERIES II, S/N: 740906, MFG: 1985… : SPINDLE CAPACITY WITH: ROUND 5C COLLETS. 1-1/16" HEXAGON 5C COLLETS. 7/8" SQUARE 5C COLLETS.″/4" STEP CHUCKS. 1-1/16" TO 6" JAW CHUCKS. 5" SPINDLE NOSE. HARDINGE TAPERLENGTH OF BED.″6" ...more
9" Hardinge #DV-59, Second Operation Lathe, 3500 RPM, variable speed, 5C Collet Closer, 6 position, 1 HP
Category: Precision and Second Operation Lathes
Seller: Machinesused.com
Location: Minneapolis, MN
Mfr: Hardinge
Model: DV-59
Max Swing:: 9", Bed Length:: 30" Dovetail Bed, Spindle Nose:: 5C Threaded, Spindle Speeds:: Variable 230-3500 RPM, Turret Stations:: 6 Position Endworking Turret, Bar Capacity:: 1-1/16" (5C Collet), Spindle Drive:: 1 HP.
Emco #Emcomat-8.4, Precision Bench Top Lathe, w/ Emco Milling Head, 8.3" swing, 17.7" centers, 0.82" bore, 65-2800 RPM, 2 speed, power feed, thread cutting, tailstock
Category: Precision and Second Operation Lathes
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Emco
Model: EMCOMAT-8.4
EMCO Emcomat 8.4 Precision Bench Top Lathw w/ Emco Milling Head #7908, Swing: 8.3" (212 mm), Between Centers: 17.7" (450 mm), Spindle Bore:.82" (21 mm), Spindle Speeds (8): 65 -2,800 RPM, 2 Speed Motor, Geared Headstock, Gears running in oil, Power Feed, Thread Cutting, MT2 Tailstock, Emco Mill Head Attachment.
Hardinge #DV-59, second operation lathe
Category: Precision and Second Operation Lathes
Seller: MachineCo
Location: Montreal, QC
Mfr: Hardinge
Model: DV-59
“Normal wear from use, ready to work!”, Hardinge Second Operation Lathe, Model DV-59 – SUPERB CONDITION!, Comes with collets and user manual!, This machine ships duty free to the U.S.A.!, Only $3,499.00 USD! Sold as is, shipping not included. Loaded, FOB Mtl, YES WE SHIP WORLDWIDE!, NOTE: Will ship ...more
9" Acra #ATL-27-EVS, Second Operation Toolmakers Lathe, 6" Chuck, 2.2" Spindle Nose diameter, 3.75" Cross Slide Travel, 1.25" Hole thru Spindle, 3 HP, 4000 RPM, new
Category: Precision and Second Operation Lathes
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Acra
Model: ATL-27-EVS
Acra 9″ Swing Second Operation Toolmakers Lathe, ATL-27 EVS, Inventory # 3041, Model: ATL 27 EVS, Series: 27, Spindle Capacity:, with Chuck: 6″, with Expaning Collets: 3″, with Round 5C Collets: 1 1/16″, with Hexagon 5C Collets: 7/8″, with Square 5C Collets: 3/4″, with Step Chucks: ...more
