1 / 10
Click to zoom in
1 / 10
For Sale by Machnet
Surplus Record Dealer Since 2009
Location: Santa Monica, CA
Contact G. Taubman
Phone Number: 310...> Show Phone Number 310-909-2020
Let the seller know you found their listing on Surplus Record!
Description
Flow WMC2 4060 13' x 20' XD Head CNC Waterjet Cutting System
Flow WMC2 4060 CNC Waterjet Cutting Table
New: 2011
Specifications:
Table Width: 13.58'
Table Length: 20'
Tank Size: 13.1' x 19.69'
Pump: 100 HP
Max Cutting Pressure: 87,000 PSI
Power Requirement: 460-480/3/60
Control: Flowmaster PC
Note: Rebuilt and Still in Operation
Several parts were cut at +/- .003" deviation on 13' diameter part.
This machine was purchased for an Aerospace job of very high tolerance.
Equipped With:
15" Color Touch Screen
Abrasive 600 Lbs Garnet Hopper with Low Level Warning
Calibration Device for 5-Axis Head
Controllable Water Level For Quiet Cutting
Dual 50 HP Pumps
Dual Intensifier
Dynamic Taper Compensating and 3D Cutting Head
Ebbco Closed Loop Chiller
Electronic Manuals Available
Flow Rebuild Tool Kit for High Pressure Pump
Flow Xpert 3D PC Based Control (Roll-Around Base)
Import DXF, TIF, BMP, JPG, and other CAD Files
Nesting and Graphics
Paser 4 Cutting System
Replaceable Slats
Windows XP / Delta Tau Controller
Flow WMC2 4060 CNC Waterjet Cutting Table
New: 2011
Specifications:
Table Width: 13.58'
Table Length: 20'
Tank Size: 13.1' x 19.69'
Pump: 100 HP
Max Cutting Pressure: 87,000 PSI
Power Requirement: 460-480/3/60
Control: Flowmaster PC
Note: Rebuilt and Still in Operation
Several parts were cut at +/- .003" deviation on 13' diameter part.
This machine was purchased for an Aerospace job of very high tolerance.
Equipped With:
15" Color Touch Screen
Abrasive 600 Lbs Garnet Hopper with Low Level Warning
Calibration Device for 5-Axis Head
Controllable Water Level For Quiet Cutting
Dual 50 HP Pumps
Dual Intensifier
Dynamic Taper Compensating and 3D Cutting Head
Ebbco Closed Loop Chiller
Electronic Manuals Available
Flow Rebuild Tool Kit for High Pressure Pump
Flow Xpert 3D PC Based Control (Roll-Around Base)
Import DXF, TIF, BMP, JPG, and other CAD Files
Nesting and Graphics
Paser 4 Cutting System
Replaceable Slats
Windows XP / Delta Tau Controller
Get Your Price from Machnet!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
KMT #Streamline-SL-VI, Waterjet Intensifier Pump, 100 HP, 60,000 psi, 1.88 GPM, .018" orifice, Siemens PLC, 460 Volt, 7.9 hours, 2015
Category: Waterjet Cutters
Seller: KD Machinery
Location: Scottsdale, AZ
Mfr: Kmt
Model: STREAMLINE SL-VI
Year: 2015
Used KMT Streamline SL-VI (2015) Waterjet for Sale. This intensifier pump unit is controlled by a Siemens PLC-based Dashboard with a color touchscreen HMI and carries 7.9 total operating hours. The 100 HP pump delivers a maximum cutting pressure of 60,000 PSI with an intensification ratio of 22:9, a maximum flow rate ...more
JUST ADDED!
Flow #Mach3-4020B-XD, CNC waterjet, 13' x 6' cutting area, 136" X, 78" Y, 7" Z, 100 HP HyperJet pump, 87,000 PSI, 5-Axis XD head, 480 V., 2016
Category: Waterjet Cutters
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Flow
Model: MACH3 4020B XD
Year: 2016
Make: Flow, Model: Mach3 4020B XD, Year: 2016, Machine Location: Iowa, Cutting Area: 13′ x 6′ (approximately 156″ x 78″), Travel:, X-Axis: 136″ (11.3 feet), Y-Axis: 78″ (6.5 feet), Z-Axis: 7″, Pump: 100 HP, Hyperjet intensifier pump, Max Pressure: 87,000 PSI, Control: ...more
Flow #Mach-3-4020B, CNC waterjet, 5-Axis Dynamic taper compensating head, 100 HP, 87000 psi, 2014
Category: Waterjet Cutters
Seller: Liberty Machine Works
Location: Preston, ID
Mfr: Flow
Model: MACH-3-4020B
Year: 2014
2014 Flow Mach 3 4020B CNC Waterjet, 5-Axis Dynamic Taper Compensating Head, (2007)100hp Dual Intensifier Hyperjet Pump 87,000 PSI, Abrasive Hopper, Spare Garnet Bags, Flow Waterveyor Garnet Abrasive Removal System With Dump Hopper, (1) 17'8"L x 4'7"W x 9'H (2) 7'8"L x 4'2"W x 6'5"H ...more
Flow #Mach-3-3020B, CNC waterjet, 100 HP, 94000 psi, CF900 hopper, 2018
Category: Waterjet Cutters
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Flow
Model: MACH-3-3020B
Year: 2018
Flow #I-6012-IFB, CNC waterjet, 5-Axis, 100 HP abrasive delivery system, 87000 psi, 2007
Category: Waterjet Cutters
Seller: Equipment Hub
Location: Decatur, GA
Mfr: Flow
Model: I-6012-IFB
Year: 2007
Stock #: 181250019, Location: North Las Vegas, NV, Brand: Flow, Model: I-6012 IFB CNC Waterjet, Year: 2007, Approx. Shipping Weight: 16,000 Lbs., Approx. Shipping Dimensions: 180" L x 102" W x 40" H, Loading Fee: Rigging Required, Cutting Area X Axis: 6', Cutting Area Y Axis: 12', Z-Axis Travel: 8 ...more
