Manufacturer: Daewoo Doosan
Model: DNM-500II
Year: 2013
Automatic Tool Changer: 30
Longitudinal" X: 40.2
Cross" Y: 21.3
Vertical" Z: 20.1
RPM: 12000
Stock # 113650
1 / 10
Click to zoom in
1 / 10
For Sale by MachineStation
Surplus Record Dealer Since 2022
Location: Lake Elsinore, CA
Contact Sales Dept.
Phone Number: 909...> Show Phone Number 909-919-9600
Let the seller know you found their listing on Surplus Record!
Description
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Doosan Fanuc i-Series CNC Control
CAT-40 Taper Spindle
USB Drive
PCMCIA Card Slot
Automatic Lubrication Unit
Rigid Tapping
Coolant Tank
Travels:
X-Axis: 40.2"
Y-Axis: 21.3"
Z-Axis: 20.1"
Rapid Traverse Rates X & Y Axis: 1417 IPM
Rapid Traverse Rates Z Axis: 1181 IPM
Cutting Feed Rates: 590 IPM
Spindle Nose to Table (Min.- Max.): 5.9" 26.0
Table:
Length: 47.2"
Width: 21.3"
Number of Std T-Slots: 4
T-Slot Width: 4.9" x 0.7"
Max Weight on Table: 1764 lbs
Spindle:
Taper Size: CAT-40
Speed Range: 12,000 RPM
Spindle Power: 25 HP
Automatic Tool Changer:
Capacity: 30 Station Side Mounted
Max Tool Weight: 17.6 lbs
Max Tool Dia: 3.1" -4.9"
Max Tool Length: 11.81"
Tool Changing Time : 1.3 Seconds
General:
Air Required: 90 psi 4 scfm
Power: 220v / 3-Phase / 50/60 Hz / 33.5 kva
Overall Dimensions: 116" x 96" x 107" High
Weight: 14330 lbs
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Features:
Doosan Fanuc i-Series CNC Control
CAT-40 Taper Spindle
USB Drive
PCMCIA Card Slot
Automatic Lubrication Unit
Rigid Tapping
Coolant Tank
Travels:
X-Axis: 40.2"
Y-Axis: 21.3"
Z-Axis: 20.1"
Rapid Traverse Rates X & Y Axis: 1417 IPM
Rapid Traverse Rates Z Axis: 1181 IPM
Cutting Feed Rates: 590 IPM
Spindle Nose to Table (Min.- Max.): 5.9" 26.0
Table:
Length: 47.2"
Width: 21.3"
Number of Std T-Slots: 4
T-Slot Width: 4.9" x 0.7"
Max Weight on Table: 1764 lbs
Spindle:
Taper Size: CAT-40
Speed Range: 12,000 RPM
Spindle Power: 25 HP
Automatic Tool Changer:
Capacity: 30 Station Side Mounted
Max Tool Weight: 17.6 lbs
Max Tool Dia: 3.1" -4.9"
Max Tool Length: 11.81"
Tool Changing Time : 1.3 Seconds
General:
Air Required: 90 psi 4 scfm
Power: 220v / 3-Phase / 50/60 Hz / 33.5 kva
Overall Dimensions: 116" x 96" x 107" High
Weight: 14330 lbs
Get Your Price from MachineStation!
Buyers Who Viewed This Listing Also Viewed:
Daewoo Doosan #DNM-500II, 3-Axis Vertical Machining Center, 47.2" x 21.2" table, 40" X, 21.2" Y, 20.1" Z, 25 HP, 8000 RPM, 30 automatic tool changer, Fanuc i CNC, 2015
Category: Vertical CNC Machining Centers
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Daewoo Doosan
Model: DNM-500II
Year: 2015
Used Vertical Machining Center, 25 hp, 8,000 RPM, 3-axis with FANUC i CNC, CT40 taper, and 30 ATC. thru spindle coolant, Renishaw receiver, and more. Cutting area of 40"x21.2"x20.1", supports up to 1764 lbs., CUTTING FEED RATE 590 IPM, RAPID TRAVERSE X 1,417 in/min., RAPID TRAVERSE Y 1,417 in/sec., RAPID TRAVERSE Z ...more
Daewoo Doosan #DNM-500II, 3-Axis, Fanuc 0iTF, 40" X, 21.2" Y, 20.1" Z, 15000 RPM, 30 automatic tool changer, Samchully S-170 rotary table, 2015
Category: Vertical CNC Machining Centers
Seller: Premier Equipment Inc
Location: Altamonte Springs, FL
Mfr: Daewoo Doosan
Model: DNM-500II
Year: 2015
2015 DOOSAN DNM500II:X-AXIS 40″Y-AXIS 21.2″Z-AXIS 20.1″# AXIS 3POWER 25 hpRPM 15,000 RPMTAPER CT40# ATC 30TABLE-W 21.2″TABLE-L 47.2″PALLETS? No4TH AXIS Yes:Fanuc Oi-TFChip Conveyor4th Axis wiringRotary Table Samchully S-170Remote Jog Handle2,500 Cutting Hours.
Daewoo Doosan #DNM-500II, CNC vertical machining center, 3-Axis, Fanuc i, 40.2" X, 21.3" Y, 20.1" Z, 8000 RPM, 30 automatic tool changer, 2015
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Daewoo Doosan
Model: DNM-500II
Year: 2015
2015 DOOSAN DNM 500II, X Axis Travel. 40.2", Y Axis Travel. 21.3", Z Axis Travel. 20.1", Cutting Feed Rate. 590 IPM, Rapid Traverse X. 1,417 in/min., Rapid Traverse Y. 1,417 in/sec., Rapid Traverse Z. 1,181 in/min., Distance From Spindle To Column. 5.9 26", Spindle Motor. 12 hp, Spindle Speed. 8,000 RPM, ATC Capacity. ...more
JUST ADDED!
Daewoo Doosan #DNM-500, CNC vertical machining center, 30 automatic tool changer, 40.1" X, 21.2" Y, 20" Z, 12000 RPM, BT-40, 21.26" x47.24" tbl., Fanuc I, thru spindle coolant, 2009
Category: Vertical CNC Machining Centers
Seller: Silverlight CNC
Location: Barrington, IL
Mfr: Daewoo Doosan
Model: DNM-500
Year: 2009
2009 DOOSAN DNM 500 CNC Vertical Machining Center. s X/Y/Z travel of 40.16/21.26/20.08", 12,000 RPM, 30-tool ATC, 40 taper, and Fanuc i Series Control. Includes high PSI coolant with chiller. Ready for your precision projects., 2009 DOOSAN DNM 500, X. 40.16", Y. 21.26", Z. 20.08", RPM. 12,000 RPM, # ATC. 30, Taper. ...more
JUST ADDED!
Smart Machine Tool #SV-3, CNC vertical machining center, 41.3" X, 20.5" Y, 20.5" Z, Fanuc 0i-MF Plus, 45.3" x19.7" table, 20/25 HP, Cat40 BigPlus, 12000 RPM, 30 automatic tool changer, 2022
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Smart Machine Tool
Model: SV-3
Year: 2022
Make: Smart, Model: SV3, Year: 2022, Machine Location: Illinois, Clean 2022 Smart Machine Tool SV-3 CNC vertical machining center featuring Fanuc 0i-MF Plus control, CAT40 Big Plus 12,000 RPM spindle, 30-station automatic tool changer, and 41.3″ x 20.5″ x 20.5″ travels for precision milling ...more
