Crouse-Hinds FDC2 Condulet Single Gang Device Junction Box, 3/4 Inch NPT Connection, Feraloy Iron Alloy

$23 USD

Request Formal Quote

FDC2 | Crouse-Hinds Eaton | Condulet Single Gang Device Junction Box, 3/4 - Condulet Single Gang Device Boxes - Cast Iron or Aluminum - With and Without Mounting Lugs for Threaded Rigid and IMC Conduit - APPLICATIONS: Cast device boxes are installed to: Accommodate wiring devices. Act as pull boxes for conductors in a conduit system. Provide openings to make splices and taps in conductors. Provide access to conductors for maintenance and future system changes. Connect conduit sections. FSY boxes for mounting surface devices on floor or bench (used with single gang covers). FEATURES: Internal green ground screw standard on boxes. Suitable for use in wet locations when used with gasketed covers. Mounting lugs standard on most boxes. Tapered threaded hubs (NPT) with integral bushing. Available for surface mounting (with mounting lugs) or flush mounting (without mounting lugs) as listed. Available as shallow (FS) or deep (FD) configuration. Use FD if device to be enclosed exceeds 15/8" in depth. Ample wiring room provided in either FS or FD configuration. Wide selection of surface or flush covers available in three materials (sheet steel, Feraloy, aluminum). Covers for flush mounting extend to conceal the rough plaster line. Available in single gang and multi-gang configurations with hubs, and as blank bodies for drilled and tapped openings. CERTIFICATIONS AND COMPLIANCES: UL Standard: 514. ANSI Standard: C33.84. Fed. Spec.: W-C-5860. CSA Standard: C22.2 No. 18 - Crouse-Hinds - Eaton - FDC2 - FDC2