Manufacturer: Chevalier
Model: FVM-3016DCL
Year: 2015
Automatic Tool Changer: 32
Longitudinal: 122.0
Cross: 59.0
Vertical: 30.7
Stock # 112838
For Sale by MachineStation
Surplus Record Dealer Since 2022
Sales Dept.
909-91...> Show Seller's Phone Number 909-919-9600 Let the seller know you found their listing on Surplus Record!
Description
Disclaimer: All specifications and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all details prior to purchase. Accessories shown are included only if listed on the invoice.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Make: Chevalier
Model: FVM-3016DCL
Year: 2015 (Installed in 2018)
Condition: Used Good
Features:
Fanuc Oi-MD CNC Control
122" X 57" Table
PCMCIA Card Slot
Rigid Tapping
Remote Jog Control
Coolant System
Travels:
X-Axis: 122"
Y-Axis: 59"
Z-Axis: 30.7"
Distance Between Columns: 67"
Spindle Nose to Table (Min.- Max.): 7.87"- 34.64"
Rapid Feedrate X, Y & Z Axis: 591 IPM
Cutting Feedrate: 276 IPM
Table:
Length: 122"
Width: 57"
T-Slot(Size X Number X Pitch): 0.86" X 7 X 7.08"
Max Weight on Table: 14,330 lbs
Spindle:
Taper Size: CAT-50
Speed Range: 6000 RPM
Spindle Power: 30 HP
Automatic Tool Changer:
CAT-50 Taper
Capacity: 20 Tools
Max Tool Weight: 33 lbs
Max Tool Length: 11.81"
Max Tool Dia.: 4.9 9.05"
General:
Air Required: 100 psi 4 scfm
Power: 230v / 60 Hz / 3-Phase / 50 Kva
Overall Machine Dimensions: 391" x 178" x 160" High
Weight: 59,400 lbs.
Equipment is sold AS-IS, WHERE-IS. All sales are final.
Make: Chevalier
Model: FVM-3016DCL
Year: 2015 (Installed in 2018)
Condition: Used Good
Features:
Fanuc Oi-MD CNC Control
122" X 57" Table
PCMCIA Card Slot
Rigid Tapping
Remote Jog Control
Coolant System
Travels:
X-Axis: 122"
Y-Axis: 59"
Z-Axis: 30.7"
Distance Between Columns: 67"
Spindle Nose to Table (Min.- Max.): 7.87"- 34.64"
Rapid Feedrate X, Y & Z Axis: 591 IPM
Cutting Feedrate: 276 IPM
Table:
Length: 122"
Width: 57"
T-Slot(Size X Number X Pitch): 0.86" X 7 X 7.08"
Max Weight on Table: 14,330 lbs
Spindle:
Taper Size: CAT-50
Speed Range: 6000 RPM
Spindle Power: 30 HP
Automatic Tool Changer:
CAT-50 Taper
Capacity: 20 Tools
Max Tool Weight: 33 lbs
Max Tool Length: 11.81"
Max Tool Dia.: 4.9 9.05"
General:
Air Required: 100 psi 4 scfm
Power: 230v / 60 Hz / 3-Phase / 50 Kva
Overall Machine Dimensions: 391" x 178" x 160" High
Weight: 59,400 lbs.
Get Your Price from MachineStation!
Buyers Who Viewed This Listing Also Viewed …
Mazak #FJV-5-FACE-60/120, Gantry Machining Center, 125.9" X Travel, 55.1" Y Travel, 25.9" Z, 50/40 HP, 10000 RPM, 30 automatic tool changer, BT-50 Taper, Renishaw OMP60 Probe
Category: Gantry Type Machining Center
Seller: Toolquip Inc
Location: Lebanon, OH
Mfr: Mazak
Model: FJV 5 FACE-60/120
Year: 2018
Max Table Load Capacity - 11,023 lb, Product Distance From Table Top Spindle Nose - 6.3" - 32.38", X Axis Travel - 125.98", Y Axis Travel - 55.12", Z Axis Travel - 25.98", Main Spindle RPM - 10,000 RPM, Rapid Traverse Rate X - 1260 IPM, Rapid Traverse Rate Y - 1575 IPM, Rapid Traverse Rate Z - 1181 IPM, Number of Tool ...more
Awea #LP3021, CNC bridge mill, 32 automatic tool changer, 120" X Travel, 83" Y Travel, 30" Z, 8k RPM, #50, 35 HP, Fanuc 18i-MB, chip conveyor, thru spindle coolant, 2005
Category: Gantry Type Machining Center
Seller: Machnet
Location: Santa Monica, CA
Mfr: Awea
Model: LP3021
Year: 2005
2005 Awea LP-3021 CNC Bridge Mill, Awea LP-3021 CNC Bridge Mill, New 2005, Travels:, X-Axis: 118", Y-Axis: 82", Z-Axis: 30", Table Capacity: 22,000 Lbs, Spindle Speed: 8,000 rpm, Spindle Motor: 35 HP, Spindle Taper: CAT 50, Tool Changer: 32 Station ATC, Fanuc 18i-MB CNC Control, Coolant Through Spindle, Chip Conveyor ...more
Kao Ming #KMC-632M, CNC bridge mill, 30 side mount tool changer, 245.2" X Travel, 151.5" Y Travel, 43.3" Z, 4000 RPM, #50, 35 HP, 531 hours, Fanuc 18iMB, 236.22"x102.36" table, rigid tap, 2012
Category: Gantry Type Machining Center
Seller: MachineStation
Location: Lake Elsinore, CA
Mfr: Kao Ming
Model: KMC-632M
Year: 2012
Disclaimer: All and hours are approximate and for reference only, often based on manufacturer literature. Buyer must verify all prior to purchase. Accessories shown are included only if listed on the invoice., Equipment is sold AS-IS, WHERE-IS. All sales are final., s:, Fanuc 18iMB CNC Control, 531 Hours Cutting Time ...more
Jobs #Linx/S, 5-axis CNC Gantry Mill, 165" X Travel, 126" Y Travel, 49" Z, 3 Spindle Changer, 32 automatic tool changer, 197" x 118", Fidia C20 cnc, thru spindle coolant, 10 HP, chip conveyor, upgrades 2019, 2003
Category: Gantry Type Machining Center
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Jobs
Model: LINX/S
Year: 2003
Make: Jobs, Model: Linx/S, Year: 2003, Machine Location: Upon Request, Table Size 197” x 118”, X-Axis Travel: 165” (4200mm), Y-Axis Travel: 126” (3200mm), Z-Axis Travel: 49” (1250mm), Rotating Angle C-Axis: +/- 200 Deg, Rotating Angle-B Axis: +90/-100 Deg, Automatic Spindle Changer: 3 ...more
Haas #GM-2, CNC gantry machining center, 145" X Travel, 87.5" Y Travel, 22" Z, 8100 RPM, 31 automatic tool changer, CT40, 2024
Category: Gantry Type Machining Center
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Haas
Model: GM-2
Year: 2024
2024 HAAS GM-2, X Axis. 145", Y Axis. 87.5", Z Axis. 22", Distance - Spindle to Table. 4" - 26", Spindle Motor. 30 hp, Spindle Speed. 15,000 RPM, ATC Capacity. 31, Taper. CT40, Over $350k replacement cost, HAAS CNC Control w/ 32 GB Expanded Memory, Steel Table-Inch, Through Spindle Coolant 300 PSI, Wireless Intuitive ...more
