Manufacturer: Krauss Maffei
Model: KE250X30D
Year: 2020
Dia.of Screw: 9.84
Stock # 8076074
Price: $269,500 USD
1 / 9
Click to zoom in
1 / 9
For Sale by KD Machinery
Surplus Record Dealer Since 2026
Location: Scottsdale, AZ
Contact Sales Dept.
Phone Number: 480...> Show Phone Number 480-565-7310
Let the seller know you found their listing on Surplus Record!
$269,500 USD
Description
Used Krauss Maffei KE250x30D (2020) Extruder for Sale. This single screw extruder has a 250 mm (9.84″) screw with a 30:1 L/D ratio and is side vented and water cooled. Drive is rated 200 kW / 268 HP at 1534 RPM, with a power requirement of 480v – 3 Ph (348 Amps). The machine was used for R & D BioResins only and comes with a control panel. It can be seen under power for an inspection. See more of our used plastic extruders or browse additional Krauss Maffei equipment. Use Activate Pricing to view pricing on this listing, or Request a Quote and we will follow up with details.
| Screw Size | 250 mm (9.84") |
|---|---|
| L/D Ratio | 30:1 |
| Vented | Side Vented |
| Water Cooled | Yes |
| kW / Horsepower | 200 kW / 268 HP / 1534 RPM |
| Power Requirement | 480v - 3 Ph (348 Amps) |
Inquire Further with KD Machinery!
Buyers Who Viewed This Listing Also Viewed:
9" Davis Standard #80IN80HT, single screw extruder, 32:1 L/D ratio, water cooled, 44" centerline, w/ gearbox, cooling, continuous screen changer, 2001
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 80IN80HT
Year: 2001
used- davis standard 9" extruder, model 80in80ht. 32:1 l/d ratio; (7) zone electrically heated, water cooled (closed loop), and vented barrel at a 44" center-line; 10.15:1 gearbox reduction ratio; gearbox rated at 1080 hp at a service factor of 1.5; gearbox is direct driven in a wrap-around manner by a 900 hp reliance ...more
9" x 10" Matsui #SMGL2-100U, low-speed granulator, 2009
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Matsui
Model: SMGL-100U
Year: 2009
Used Matsui SMGL-100U Low-Speed Type Granulator, 2009 30 RPM, 1 HP Motor 5MM X 5MM Cutters 30 RPM 3 Small Rotating Cutters 2 Large Rotating Cutters 3 Bed Cutter S/N: 0032002727 230/3/60, 4A *Motor is burnt out, might need additional work Approximate Dimensions: 34" L x 17" W x 68" H.
10" Davis Standard #100TH100D, single screw extruder, 38:1 L/D ratio, water cooled, 44" centerline, w/ direct dr gearbox, cooling, Trendelkamp screen changer, 1991
Category: Extruders and Extrusion Lines
Seller: Aaron Equipment Co
Location: Schaumburg, IL
Mfr: Davis Standard
Model: 100TH100D
Year: 1991
used- davis standard 10" extruder, model 100th100d. 38:1 l/d ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 gearbox reduction ratio; rated at 1800 hp at a service factor of 1.5; gearbox currently set to be dual direct driven in back of the gearbox. last ...more
9" x 10" Matsui #SMGL2-100U, low-speed granulator, 2010
Category: Extruders and Extrusion Lines
Seller: Arlington Machinery
Location: Lake Zurich, IL
Mfr: Matsui
Model: SMGL-100U
Year: 2010
9" x 10" Matsui SMGL2-100U Low-Speed Type Granulator, 2010 30 RPM, 1 HP Motor 5MM X 5MM 28 RPM 3 Small Rotating Cutters 2 Large Rotating Cutters 3 Bed Cutters 230/3/60, 4.0A S/N: 003200276 SOLD AS-IS Machine Will Need Additional Work To Be Operational Approximate Dimensions: 34" L x 17" W x 68" H.
8" NRM, hot feed rubber extruder, right hand feed, 20.5:1 G/B ratio, unitized base, 1974
Category: Extruders and Extrusion Lines
Seller: Soberay & Sons Ltd
Location: Cleveland, OH
Mfr: Nrm
Year: 1974
One (1) Used 8" NRM Hot Feed Extruder, right hand feed, pneumatically adjustable sheet head, GB ratio 20.5:1, unitized base, date 12-74, Order 104353, S/N T-18580.
