1 / 10
Click to zoom in
1 / 10
For Sale by Carolina Machinery Sales
Surplus Record Dealer Since 2021
Location: Monroe, NC
Contact Ralph Viegelmann
Phone Number: 704...> Show Phone Number 704-288-1904
Let the seller know you found their listing on Surplus Record!
Description
Corley 8" x 60" Top Arbor Combination Gang EdgerIncludes:
- Corley 8" x 60" Gang Edger
- Edger had been modified by previous owner for their process. After the purchase of the machine, it was taken apart to the bare frame and rebuilt to Corley's original drawings back to factory condition with new parts in March 2019.
- The motor controls were updated to Inverter Drives.
- It was also modified to be able to run as a Combination Gang Edger (Gang Edger - Right Side and Board Edger - Left Side with Shifting Saws controlled by on board Set-Works) and as a Double Side Gang (Current Set-up).
- Gang Edger is powered by 2 - 150 Hp Electric Motors. Comes with Control Console Pedestal, Control Center Cabinet and Soft Start Cabinet.
- Also have several blades, collars, spacers and spare parts (Bearings, etc).
- Infeed with Pineapple Roller - 5' x 11'
- Outfeed - 5' x 22'
- Corley 8" x 60" Gang Edger
- Edger had been modified by previous owner for their process. After the purchase of the machine, it was taken apart to the bare frame and rebuilt to Corley's original drawings back to factory condition with new parts in March 2019.
- The motor controls were updated to Inverter Drives.
- It was also modified to be able to run as a Combination Gang Edger (Gang Edger - Right Side and Board Edger - Left Side with Shifting Saws controlled by on board Set-Works) and as a Double Side Gang (Current Set-up).
- Gang Edger is powered by 2 - 150 Hp Electric Motors. Comes with Control Console Pedestal, Control Center Cabinet and Soft Start Cabinet.
- Also have several blades, collars, spacers and spare parts (Bearings, etc).
- Infeed with Pineapple Roller - 5' x 11'
- Outfeed - 5' x 22'
Get Your Price from Carolina Machinery Sales!
Buyers Who Viewed This Listing Also Viewed:
8" Paul #AB920, Rip Saw with Infeed & Outfeed, 480 Volt
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Mfr: Paul
Model: AB920
Paul AB920 Rip Saw, Scanning, Fenceless Infeed, Infeed & Outfeed (not including decks), The machine has one fixed and 2 moving blades. The minimum distance between the moving blades is 44 mm (1.73"). The maximum distance between the moving saw blades is 210 mm (8-1/4")., The machine is designed for incoming boards ...more
7-1/2" Cam-Wood #TRS-190-2VSX, Slat Ripper, 6" H, 25 HP, 1.968" spindle diameter, 3500 RPM, 12" cutting circle, 120 FPM, 2026, new
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: TRS-190-2VSX
Year: 2026
CAM-WOOD TRS-190-2VS 7.5"; x 6"; VERTICAL SPINDLE MOULDER FOR SMOOTH SLAT RIPPINGIncludes one setup including Splitter Set, Holddown Plate, Fence, Sawblades, and Spacers WORKING CAPACITY -- Working width: 3"; to 7-1/2"; -- Working height: 3/4"; to 6"; RIGHT VERTICAL SPINDLE -- With 25 HP motor: -- Spindle diameter: ...more
9" Rose Machinery #LCFCMS14, Ripsaw Outfeed/Moulder Infeed, 42" +/-1" passline H, 9" W x 4" thick x 16' L stock, 300 FPM roll, 2026, new
Category: Gang Rip Saws
Seller: Ex-Factory
Location: Charlotte, NC
Model: LCFCMS14
Year: 2026
ROSE MACHINERY LCFCMS14 PANEL RIPPER TO MOULDER TRANSFER SYSTEM OUTFEED ROLLCASE: -- Outfeed Rollcase receives material from the LHI Panel Ripper at 47 1/4"; elevation and drops down to place the lumber onto the Transfer Chains at 42"; elevation. 66"; wide rolls are 2-12"; diameter steel rolls, snap in style on 12"; ...more
Ligna, Top Arbor Gang Saw, 14' infeed, 10" x36"
Category: Gang Rip Saws
Seller: Carolina Machinery Sales
Location: Monroe, NC
Ligna 20" x 36' Top Arbor Gang Saw, Quick change door, Chrome press rolls, 14' Infeed with positioning system, Cant turner, Liaser lights with controls, The first photos shown are of the system installed. The resaw has been dismantled and ready to load, as shown in the last photos.
2.75" Mereen-Johnson #524-DDCSR, 2+4 Double Arbor Gang Rip Saw, 24" Arbor Space, 12"/14" Tooling, 30" min. Length, (2) 75 HP, 2016
Category: Gang Rip Saws
Seller: RT Machine
Location: Hughesville, PA
Mfr: Mereen-Johnson
Model: 524-DDCSR
Year: 2016
Mereen-Johnson Model 524-DDCSR 2+4 Double Arbor First Arbor Arranged with Two (2) Independently Adjustable Select Saw Assemblies for Mounting Hogging Blades Second Arbor with Four (4) Independently Adjustable Select Saw Assemblies Arbor Space 24" Thickness Capacity to 1-3/4" with 12" Tooling and 2-3/4" Using 14" ...more
