1 / 3
Click to zoom in
1 / 3
For Sale by RT Machine
Surplus Record Dealer Since 2025
Location: Hughesville, PA
Contact Sales
Phone Number: 570...> Show Phone Number 570-584-2002
Let the seller know you found their listing on Surplus Record!
Description
- Timesavers Model 2311-24-06 Pro-V Single Head 43" Segmented Widebelt/Polisher
- Specifications:
- Abrasive belt size: 43 x 75"
- Main motor: 25HP
- Maximum width stock: 42"
- Minimum part size: 6 x 6 with vacuum bed
- Maximum thickness opening: 5"
- Infeed loading area: 14"
- Feed speed: 15-45 FPM
- Approximate full load amps at 460 volt: 63
- Passline height: 33-38"
- Dust extraction: 2500 CFM (5" static pressure)
- Compressed air usage: 8 CFM @ 90 psi
- Addtl compressed air usage for belt blow-off: 41 CFM @ 90 psi
- Standard Features:
- Dual Action Segmented Sanding Head
- 25 Horsepower Main Drive Motor
- Infeed Stop Bar
- A.C. Variable Frequency Main Drive Motor
- Dual Infeed and Dual Outfeed Holddown Rolls
- Air Operated Disc Brakes
- Centralized Control Panel
- Dial Indicators on Adjustable Drum/Platen Heads
- PLC Controller with HMI Interface
- Quick Release Outboard Support
- Main Motor Percentage Load Meter
- Hour Meter
- Motorized Thickness Adjustment
- Variable Speed Conveyor Drive
- Part Set-up Device
- Through-Beam Abrasive Belt Tracking
- Abrasive Belt Blow-Off
- U.L. Listed Components
- Panel Cleaning Brush
- Vacuum Conveyor Bed
Get Your Price from RT Machine!
Buyers Who Viewed This Listing Also Viewed:
JUST ADDED!
43" Sandingmaster #SCSB-2-1300, Wide Belt Sander, Sandomatic control, digital thickness readout, 6,312 hours
Category: Woodworking Sanders
Seller: Heavy Wall Consulting
Location: Long Beach, CA
Mfr: Sandingmaster
Model: SCSB-2-1300
**Model is likely SCSB 2-1300 but could not verify**, Sandingmaster wide belt sander manufactured by Linden Machines B.V. in Goes, Holland. Sandomatic control panel with selectable finesanding and calibrating modes, front and rear pressure gauges, and a digital thickness/height readout (Accu-Rite ProScale). Hour meter ...more
JUST ADDED!
43" Houfek #Maxx-1100, 2 Head Widebelt Sander
Category: Woodworking Sanders
Seller: Machinery Associates Inc
Location: Hudson, NH
Mfr: Houfek
Model: MAXX-1100
Year: 2007
Max Width; (1100mm (43"), Sanding Belt Dim.; 1120x2200 (44"x 86.6"), Max Height of workpiece; 160mm (6.2"), Min Height of Workpiece; 3mm (About 1/8"), Feed Belt Speed; 2.5 - 12m/min, Vacuum Bed with vac blower, Comes with spare sanding belts (see boxes on the top of the machine), The vacuum conveyor belt is in really ...more
43" x 73" Kundig #Optiq-2-43, dual head wide belt sander, 6.25" diameter, 9-45 FPM, emergency stop button, 2004
Category: Woodworking Sanders
Seller: Ex-Factory
Location: Charlotte, NC
Model: OPTIQ-2-43
Year: 2004
KUNDIG OPTIQ 2-43 DUAL HEAD WIDE BELT SANDER2-Head, 43" width cap. - 1st Head: steel contact roll, 6-1/4" Dia., 25 HP motor. -- 2nd Head: Combination head with 6-1/4" dia. rubber covered contact roll 50-Shore) and 3-1/8" wide finishing platen, 15 HP motor. -- Abrasive belt size 43" x 75", with air tensioning & ...more
43" Timesavers #1321-14-01, Widebelt, 2-Head, 5" thick, 15-45 FPM, 33-38" passline, 2000 CFM, unused
Category: Woodworking Sanders
Seller: RT Machine
Location: Hughesville, PA
Mfr: Timesavers
Model: 1321-14-01
Timesavers Model 1321-14-01 Two Head 43" Widebelt Sander : Abrasive belt size: 43" x 60" Main motor: 20HP & 15HP Maximum width stock: 42" Minimum part length: 13" Maximum thickness opening: 5" Feed speed: 15-45 FPM Passline height: 33-38" Dust extraction: 2000 CFM (5" static pressure) Compressed air usage: 4 CFM @ ...more
43" Cantek #PR4375DA, 2-head belt sander, 49 HP, 575 V.
Category: Woodworking Sanders
Seller: Lenmark Industries
Location: Langley, BC
Mfr: Cantek
Model: PR4375DA
SKU: 127772, Model: PR4375DA, Condition: Used, S/N: 080224, Horsepower: 49 hp, Max. Workpiece Width: 43 ", # of Belts: 2, Type: Belt, Electrical :, Voltage: 575 volts, Phase: 3-phase, Dimensions: 95.00 (H) x 79.00 (W) x 69.00 (L) inches, Additional.
