Laboratory Fourdrinier 24" paper machine

Used 24" wide Laboratory Fourdrinier paper machine consisting of: Hogenkamp stainless steel headbox with 27 pond. Estimated 24 trim. Last made 20 paper. (2) internal dilution rolls, bar thickness adjustment reported from 6 mil to 60 mil. 12 o.d. breast roll, 12 Stainless Steel Fourdrinier section with (14) stainless steel felt rollers and (3) stainless steel suction boxes, 16 x 32 rubber covered roll, (2) LG Industries press sections with rubber covered blind drilled rolls. First dryer section consists of (10) 48 x 36 o.d. dryer rolls (9) are Sandy Hill and (1) is Black Clawson. All are National Board stamped, 150 psi. Shell 7/8, head (1) 1/4. LG rope stretch. Inclined air operated S-wrap type coater. 2nd dryer section consisting of (3) Sandy Hill and (3) Black Clawson. Same specs. LG 2 roll calender with 16 x 32 top roll and 18 x 32 bottom roll with Mt Hope bowed roll and idler roll. Edge trim section. Surface winder with 32 x 16 drum. Nash 701 vacuum pump with a second Nash vacuum pump. Goulds pumps, Andritz R12MA refiner, 30 Sweco, and LG 36 diameter stainless steel pulper. (4) Fiberglass open top tanks approx 500 gallon, dish bottom with 3 center discharge with 18 discharge height, on 4 legs, overall height 9 with Lightining 1.5 HP 205/220/440 volt motor and gearbox with 7 x 2 SS shaft with 2 sets of blades. (2) Raven 66 OD. x 72 H 1000 gallon fiberglass tanks with dish bottom on leg and agitator. (1) Baeuerle and Morris stainless steel open top tank, approx 3000 gallon, 9 x 68 x 78 with cone bottom and 3 discharge, 18 discharge height on 4 legs.