175 Ton, Eitel #RP-160, 279" bed, 10" stroke, 13.75" throat, 31.5" DL, center/roller work rests, 1982

SPECIFICATIONS

Maximum Straightening Pressure	175 Ton
Straightening Bed (L x W)	79" x 10.75"
Bed Width Extensions	279"
Length of Pressure Bearing Bed	72"
Ram Speed Up	375 IPM
Ram Speed Down	90 IPM
Total Stroke	10"
Controllable Straightening Stroke (Adjustable)	7/8"
Daylight to Table, Maximum	31.5"
Daylight to Table, Minimum	13-3/4"
Depth of Throat	13.75"
Front of Table to Face of Machine	19.75"
Height of Table	35"
Height of Centers	9.5"
Maximum Swing	14-1/8"
Distance between Centers	249"
Maximum Weight Workpiece	1,770 lbs
Overall Height	120"
Approximate Weight	16,000 lbs.

EQUIPPED WITH
Motor Driven With 25 HP 3 Phase 60 Cycle AC Hydraulic Pump Drive. Complete Electrical Controls.Stroke Control Allowing For Fine Adjustment Of The Lowest Position Of The Ram Within The Last 20mm Of The Set Ram Stroke. Limitation Of Return Stroke For Presetting The Shortest Stroke To Suit The Job Thereby Reducing Operating Time. WR3 Shaft Straightening Attachment Complete With Center Supports With Right Hand Handwheel For Center Adjustment. Roller Type Work Rests For Uncentered Workpieces. Turret Stop For Minimizing Stroke. Swinging Measuring Bracket Mounted To Frame Complete With Dial Indicator. (4) 40 Table Extension With Supports. (2) 20 Table Extensions With End Stops And Supports.

This machine is being offered thoroughly checked out, cleaned and cycled. It is being offered with a 30-Day Return Privilege and may be inspected under power.