ITEM 16101: American Process Forberg Fluidized Zone Paddle Mixer – Model FZM-12
12 cubic foot working capacity. Carbon steel construction. Bolt-on top cover with installed 21″ X 16″ bin vent with side access for single cartridge filter (includes pulse timer/enclosure, solenoid, and header piping, bottom bracket to hold filter). Also has one 8.5″Ø and four 5″Ø sleeve ports for ingredients. The dual shaft mixing chamber is 49.5″ long X 39.5 long. Tandem flush bombay doors pneumatically controlled. Base mounting flange measures: 43″ wide X 53″ long.
SN F-1039 Shop Order: F-1039. Built 3-24-95
Manufactured by American Process Systems, Division of Eirich Machines, Gurnee, IL,
Demonstration video on file. More dust collector photos are available upon request.
Used 11 cu ft American Process paddle ribbon blender, model PRB-011, stainless steel construction, approximately 21" wide x 48" long trough, paddle ribbon agitator with outside paddles and inside ribbon, shaft mounted gearbox with 7.5 hp, 230/460 volt motor drive, serial# 807224, built 2013.
A&J Pfaudler Model AJSP183-6DCSS Stainless Steel 18 cubic foot double rotor fluidized paddle mixer. s jacketed sidewalls and hinged top access. Mixing chamber measures approximately 36 long x 34 wide x 22 deep. Driven by two 7.5 HP, 230/460V, 3-phase, 60 Hz SEW Eurodrive motors with 29:1 gear ratio, operating at ...more
Marion, Model 2041, 20 ft³ (15 ft³ workable), jacketed paddle mixer with 316 stainless steel contact parts. 48" in Length x 28" Diameter cylindrical mixing chamber with lift up bolt down top cover, (9) top mounted spray nozzles supplied by a ½" NPT fitting, 2¾" diameter ...more
Used 11 cu ft American Process paddle ribbon blender, model PRB-011, stainless steel construction, approximately 21" wide x 48" long trough, paddle ribbon agitator with outside paddles and inside ribbon, shaft mounted gearbox with 7.5 hp, 230/460 volt motor drive, serial# 6002, built 2004.
Foster Equipment Paddle Mixer, approximately 15 cubic feet capacity, all carbon steel construction and mounted on legs. Trough measures 24" wide X 48" long X 32" deep, with 10" x 10" bottom center outlet, height discharge 33". Paddles (6) are bolted to common shaft and driven by 10 HP direct connect motor, 230/460 V ...more
