Nardello #Special, Panel Splitter, 157.4" L x 17.7" + 17.7" width x 1.57" thick, 114 FPM, 2.5 HP w/11.8" diameter scoring, 2.5 HP w/13.7" diameter Main, 4000 RPM, 2026, new

NARDELLO - SM 45O: Panel Splitter to cut laminated board with HPL to obtain (5) Panel Cabinet Doors -- MDF Parts occasionally particleboard. -- Length: 2,438 mm. -- Min. width: 4,1875 Inches (106.36 mm) to be split into (2) pieces; each (2) inches (50.8 mm) wide. -- Max. width: 9.1875 Inches (233.37 mm) to be split into (2) pieces: (1) 6" (152.4 mm); (1) 3" inches (76.2 mm). -- Min. & max. thickness of the parts: Min.: 0.625" (15.88 mm); max.: 1" (25.4 mm). -- (2) Sides edgebanded. -- Request for a good clean cut. -- IMA Edgebander runs at: 24 MPM. -- Daily production: (500) +/- Pieces.Includes -- Motorized Infeed roller conveyor with PVC coated rollers. -- Steel base: Fixed on (2) shoulders where the machine can move. -- Galvanized idle rollers to prevent damage to the delicate surface of the panels, as far as possible considering the residual dust factor on the panel and thetype of suction used by the customer. -- Upper drive unit with: (2) Drive belts, different sizes; longer on the guide side and shorter on the outer side to bring the panel onto the cutting area. -- Bottom engraver with: 1.85 kW motor. -- Bottom scoring unit has Postforming function: It rises automatically after the panel has passed through; at the end of the panel, it can be cut without chipping the side. -- Main Saw: 4 kW Motor. -- Motorized exit roller conveyor with PVC-coated rollers.Technical Data. -- To comply with EC Safety Regulations ● Electric scoring height adjustment. ● Electrical alignment of the engraver with the saw blade ● Electric main blade lift. ● Automatic lifting with pneumatic cylinder of the engraver (postforming function). -- Time controlled micro to regulate the rise time of the engraver with postforming function. -- Towing unit with (2) drive belts: Speed varies from: 6 - 35 m/1'. This is the haul off speed and does not correspond to the cutting speed, which depends on the material to be cut and the tools. -- Electrical machine displacement. -- Control panel. -- Tolerance: +/- 0.2 mm/1 m. -- Scoring motor: kW 1.85. -- Saw blade motor: 4 kW. -- Rotational speed: 4,000 G/1'. -- Volt: 400/50. -- Technical documentation in English: Instruction Manual; Circuit Diagram; CE Certification.NOTES ● Machine is delivered without tools. ● Machine cannot avoid the banana effect but ensures the parallelism of the cut pieces. ● It will be necessary to receive a pallet of parts from the customer for testing before delivery: It is necessary to receive blades for testing.

Request More Information from Seller