Mikron #HSM-600U, 5-Axis vertical machining center, 50 automatic tool changer, 31.5" X, 23.6" Y, 19.7" Z, 24000 RPM, iTNC 530 Control, 2010

One used 2010 +GF+ MIKRON HSM600U 5-Axis Machining Center with Pallet Changer: Machine manufactured at +GF+ in Nidau, Switzerland 12/17/2010. First installed new in USA 3/9/2011. CONTROL Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup WORKING RANGE Longitudinal X-Axis..................................... 31.5" (800 mm) Cross Y-Axis............................................ 23.6" (600 mm) Vertical Z-Axis......................................... 19.7" (500 mm) B-Axis (Swivel)....................................... +30/-110 degrees C-Axis (Rotary)........................................ n x 360 degrees Number of simultaneous axis........................... 5/5 simultaneous FEED DRIVE Feed Rate X/Y/Z................................... 1,653 IPM (42 m/min) Feed Rate B-Axis (Swivel)...................................... 200 RPM Feed Rate C-Axis (Rotary).................................... 360 RPM ! Acceleration X/Y/Z..................................... up to 17 m/sec2 DIRECT DRIVE ROTARY TILTING TABLE WITH DYNAFIX Pallet Clamping Surface.. 11.02" x 11.02" (280 mm x 280 mm) pallet size Maximum workpiece weight (manual loading)............. 264 lbs (120 kg) Maximum workpiece weight (automatic with pallet changer) 198 lbs (90 kg) Max pallet size possible for this machine 13.8" x 13.8" (350 x 350 mm) Pallet type this machine is equipped for............. System 3R Dynafix Number of pallet stations this machine is equipped with 7 pallet stations NOTE optional pallets sized 350 x 350 mm NOT included with this machine With hydraulic clamping in turning and swivelling axis All feed motors are liquid-cooled Direct measuring system Heidenhain rotary encoders AUTOMATION Tool Magazine automatic tool changer...................... 50 positions Laser tool measuring system................................... Standard Automatic pallet changer number of pallet stations... 7 pallet stations WEIGHT Including pallet changer........... Approximately 20,282 lbs (9,200 kg) Machine base....................... Polymer concrete (man made granite) SPINDLE Spindle taper.................................................. HSK A63 Spindle RPM................................................. 24,000 RPM Spindle power 40% ED................................... 29.5 HP (22 kW) Spindle torque 40% ED............................... 33.9 Ft/Lb (46 Nm) EQUIPPED WITH: Band filter system 172 gallon (650 l) coolant tank with paper filtration system & 1,015 PSI (70 bar) CTS Chip conveyor for higher demands Tool cleaning by air blast blow off unit Direct measuring system Heidenhain glass scales X/Y/Z External spindle chiller Fully enclosed machine enclosure Pallet changer Dynafix APS option Advance Process System ITC option Intelligent Thermal Control ITC-5X option 5-Axis Intelligent Thermal Control BLUM laser tool measuring system Infrared parts measuring touch probe Beacon Oil Mist Extractor Miscellaneous used pallets Purchase Point is Hartland, WI 53029 To the best of our knowledge all details listed above are deemed correct. It is the Buyer's responsibility to confirm all details including condition, capacity, suitability or performance and we encourage an under power inspection of the machine(s) and accessories prior to purchase.

Request More Information from Seller