Manufacturer: Fadal
Model: VMC6030HT
Automatic Tool Changer: 21
Longitudinal" X: 60.0
Cross" Y: 30.0
Vertical" Z: 30.0
Stock # 3854
For Sale by Bridgeline Machinery Corp
Carmine Perrelli
847-37...> Show Seller's Phone Number 847-372-4138 Let the seller know you found their listing on Surplus Record!
Description
Travels
X Travel: 60"
Y Travel: 30"
Z Travel: 30"
ATC: 21
Table Dimensions
Table-W: 30"
Table-L: 62.5"
Recent Brand New Spindle Install
New High & Low Gear Belts for Spindle Installed August 2025
Gibs Installed on X & Y Aaxis Installed September 2025
Machine Dimensions (approx.): 150" L x 120" W x 122" H
Machine Weight (approx.): 17,200 lbs.
Disclaimer
Preliminary specifications are provided for general guidance only and may change without notice. They are believed to be accurate but are not guaranteed. All specifications, dimensions, capacities, weights, and performance figures should be independently verified by the buyer prior to purchase or use. Bridgeline Machinery Corp. makes no representations or warranties, express or implied, regarding the completeness, accuracy, or suitability of any machine specifications, and shall not be liable for any errors or omissions.
X Travel: 60"
Y Travel: 30"
Z Travel: 30"
ATC: 21
Table Dimensions
Table-W: 30"
Table-L: 62.5"
Recent Brand New Spindle Install
New High & Low Gear Belts for Spindle Installed August 2025
Gibs Installed on X & Y Aaxis Installed September 2025
Machine Dimensions (approx.): 150" L x 120" W x 122" H
Machine Weight (approx.): 17,200 lbs.
Disclaimer
Preliminary specifications are provided for general guidance only and may change without notice. They are believed to be accurate but are not guaranteed. All specifications, dimensions, capacities, weights, and performance figures should be independently verified by the buyer prior to purchase or use. Bridgeline Machinery Corp. makes no representations or warranties, express or implied, regarding the completeness, accuracy, or suitability of any machine specifications, and shall not be liable for any errors or omissions.
Get Your Price from Bridgeline Machinery Corp!
Buyers Who Viewed This Listing Also Viewed …
JUST ADDED!
Fadal #VMC6030HT, CNC vertical machining center, 60" X, 30" Y, 30" Z, 10000 RPM, 24 automatic tool changer, Cat 40, low hours, 2008
Category: Vertical CNC Machining Centers
Seller: Machinery Network Inc
Location: Encino, CA
Mfr: Fadal
Model: VMC6030HT
Year: 2008
2008 FADAL VMC-6030HT, X Axis Travel. 60", Y Axis Travel. 30", Z Axis Travel. 30", Spindle Motor. 22.5 hp, Spindle Speed. 10,000 RPM, ATC Capacity. 24, Spindle Taper. CAT-40, Table-W. 30", Table-L. 62.5", Fadal CNC Control, Machine On hours 1,740 hours, Machine Run Hours 238 hours, 240 Volt, 51 Amps.
Fadal #VMC6030HT, CNC vertical machining center, multiprocessor controls, 60" X, 30" Y, 30" Z, 10000 RPM, 21 automatic tool changer, 2004
Category: Vertical CNC Machining Centers
Seller: Blumberg Machinery Co
Location: Bannockburn, IL
Mfr: Fadal
Model: VMC6030HT
Year: 2004
FADAL VMC 6030HT VERTICAL MACHINING CENTER, New 2004, Motor Driven with 22.5 HP, 3-Phase, 60 Cycle, AC Spindle Drive, Fadal CNC Multiprocessor Controls, Remote Pulse Generator Hand Wheel Control, Automatic Tool Changer, High Torque Spindle, Rigid tapping Box Ways All Axes, Coolant, Table Size 62.58" x 30", Travels, X ...more
Fadal #VMC6030HT, vertical machining center, 60" X, 30" Y, 30" Z, 62.5" x 30" Table, 400 IPM, 22.5 HP, 10-10000 RPM, CAT40 Taper, 21-Tool automatic tool changer, 2001
Category: Vertical CNC Machining Centers
Seller: Revelation Machinery
Location: Chicago, IL
Mfr: Fadal
Model: VMC6030HT
Year: 2001
Make: Fadal, Model: 6030HT, Year: 2001, Machine Location: Alabama, X-Axis Travel: 60″, Y-Axis Travel: 30″, Z-Axis Travel: 30″, Rapid Traverse (X, Y, Z): 400 IPM, Table Size: 62.5″ x 30″, Max Table Weight: 4,120 LB, Spindle Speed: 10 – 10,000 RPM, Spindle Motor: 22.5 HP, Spindle ...more
Fadal #VMC6030HT, vertical machining center, 21 automatic tool changer, 60" X, 30" Y, 30" Z, 10000 RPM, #40, 15 HP, 62.5" x 30" table
Category: Vertical CNC Machining Centers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Fadal
Model: VMC6030HT
(1) Used Fadal Model 6030HT Vertical Machining Center, X Axis Travel: 60, Y Axis Travel: 30, Z Axis Travel: 30, Table Size: 62.5 x 30, Tool Positions: 21 ATC, Spindle Speed: 10,000 RPM *, Spindle Taper: CT40 *, Spindle Motor: 15 HP *, Electrical: 480V/3ph/60hz *, No Coolant System, * All subject to customer ...more
Fadal #VMC6030HT, vertical machining center, 21 automatic tool changer, 60" X, 30" Y, 30" Z, 10000 RPM, #40, 62" x30"tbl., Fadal Multi-Processor, 2003
Category: Vertical CNC Machining Centers
Seller: MD Equipment Services LLC
Location: Crooked River, OR
Mfr: Fadal
Model: VMC6030HT
Year: 2003
CNC Vertical Milling Machine, Manufacturer: Fadal Engineering, Model: VMC 6030HT, DOM: 2003, Electrics: 480 Volt, 3 Phase, 50-60 Cycle, 25 FLA, Largest AC Motor: 38.4A @ 240 Volt, Main Motor: 22.5 HP, s and :,.Controls: Fadal Multi-Processor CNC,.Table Size: 62" x 30",.Travels (3-Axis):,.X-Axis: ...more
