AI-ranked results for 24 stand - closest matches first
24 Stand, Tishken #24-MW-3, rollformer, 3" spdl diameter, 36" rollspace, equal gearing, automatic lube, 1984
Southern Fabricating Mchy Sales | Lithia, FL
Category: Rollformers
Seller: Southern Fabricating Mchy Sales
Location: Lithia, FL
Mfr: Tishken
Model: 24-MW-3
Year: 1984
3” X 36” Rollformer with Equal Gearing, Auto Lube, Entry Edge Guide and Variable Speed Guide., Number of Stands: 24, Spindle Diameter: 3”, Rollspace: 36”, Horizontal Distance: 14”, Vertical Adjustment: 6-½” - 8”, Lower Spindle to Base: 6”, Pass Line: 36” ...more
24 Stand, Tishken #24-HWS, 3" spindle diameter, 36" roll space, 40 HP, 14" horizontal centers, 1986
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Tishken
Model: 24-HWS
Year: 1986
Spindle Diameter 3 inches Number of Stands 24 Power 40 horsepower Horizontal Centers 14" Vertical Centers 13.5 "-14.25" With 1" of Verticaladjustment Base To Bottom Of Spindle 6" Roll Space 36" Gear Ratio Equal Coolant yes Dimensions 392" LR x 100" FB x 50" Tall Weight 50000 pounds, Auto Lube System, 1986, 2 Separate ...more
15 Stand, Bradbury #MCE2.5-60-16, 3" arbor diameter, 5.5" vert.4" horiz.spacing, 1991, #69559
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: MCE 2.5-60-16
Year: 1991
SERIAL. 7600, MODEL. MCE 2.5-60-16, YEAR. 1991, MATERIAL GAUGE. 30GA - 24 GA, NUMBER OF STANDS. 15, ARBOR DIAMETER. 3", ARBOR WIDTH. 44", VERTICAL SPACING. 5.5", HORIZONTAL SPACING. 24", MOTOR. 480V/3PH, CUTOFF PRESS AVAILABLE. AT EXTRA COST 65K (STOCK #69560).
14 Stand, Lockformer Duplex, 1.25"shaft, 4" roll space, 24 ga.capacity, s/n #1401834
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Lockformer
MODEL#: DUPLEX, SERIAL #: 1401834, 14 STANDS, 1.25" SHAFTS, 4" ROLL SPACE, 8" HORIZONTAL DISTANCE BETWEEN ROLLS, 4.75" VERTICAL CENTER DISTANCE BETWEEN SHAFTS, 24 GAUGE CAPACITY, 10"-56" DISTANCE BETWEEN ROLLS, 230/460 VOLTAGE, 130" LR x 97" FB x 55" TALL DIMENSIONS, 9500 LBS APPROXIMATE WEIGHT, GOOD CONDITION.
24 Stand, Clinton, rollformer, 3" arbor, 46" roll space, 14" horizontal centers, 5.5"-7" vertical adj., 39" passline, exit side rolls w/ tooling
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
SERIAL. 1685 5-77, MODEL. 24 STAND DOOR PANEL, STANDS. 24, ARBOR. 3", ROLL SPACE. 46", CAPACITY.019" TO.035", HORIZONTAL CENTERS. 14", VERTICAL CENTERS. 5.5" TO 7", BASE TO LOWER SPINDLE. 5.5", DRIVE GEARBOXES. 4, GEARBOX RATIO. 15:1, PASS LINE. 39", EXIT SIDE ROLLS. YES WITH TOOLING, MOTOR. 40 HP DC WITH CONTROLS.
Get email updates for newly added Rollformers
Rollformers (also known as roll forming machines) are used to shape sheet metal or strips into continuous profiles by passing them through a series of rollers. Commonly used in industries like construction, automotive, and manufacturing, they are ideal for producing parts like roofing panels, beams, and tubing. Rollformers are essential for efficiently creating uniform, high-quality metal profiles in large-scale production.
20 Stand, Tishken Rollformer, 12" W, 24 Ga., 10000 lb. Capacity, Servomatic IV Feed, 15-1/2" Shut Height, 40 Ton, 3" Stroke, 45 SPM, AMS Control
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
, Width: 12", Stands: 20, Spindle Diameter: 2", Gauge range: 24 Gauge, Product: Access Door Back Panel, Includes:, Mandrel Uncoiler, -36" wide Mandrel Uncoiler, -10,000 Lbs. Weight Capacity, Servomatic IV Press Feed Unit, 40 Ton x 3" Rousselle Straight Side Press, -Model 4S56, -Shut Height: 15-1/2", -Tonnage: 40 ...more
13 Stand, Bradbury, 3" arbor diameter, 6.5" vert.spacing, 18"-24" horiz.spacing, 1990, #69558
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury & Tishken
Year: 1990
YEAR. 1990, MATERIAL GAUGE. 30GA - 24 GA, NUMBER OF STANDS. 13, ARBOR DIAMETER. 3", ARBOR WIDTH. 44.5", VERTICAL SPACING. 6.5", HORIZONTAL SPACING. 18"-24" (VARIES), MOTOR. 350A/480V/3PH, LESS TOOLING, TOOLED FOR STANDARD CORRUGATION. 2-1/2", CUTOFF PRESS AVAILABLE. 65K (STOCK #69560), TOOLING SOLD SEPARATELY. 25K ...more
24 Stand, Tishken #24-HWAS-3, rollformer, 3" spindle diameter, 40" adj. rollspace, 6-1/2"- 8-3/8" vertical adj., 14" horizontal centers, 39" passline, 1991
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Tishken
Model: 24-HWAS-3
Year: 1991
Serial Number: (20679-1091), Number of Stands: 24 (Two 12 Stand Bases), Spindle Diameter: 3”, Roll Space: 30” - 40” (Powered Adjustment), Gearing: Unequal 1.3 to 1, Vertical Adjustment: 6 1/2” to 8 3/8”, Horizontal Center: 14”, Passline Height: 39” (Approximately), Right to ...more
JUST ADDED!
24 Stand, Dreinstern, roll form line, 20" width, 1.5mm thickness, 2.5" shaft diameter, R to L, 60M/m
General Machinery LLC | Detroit, MI
Category: Rollformers
Seller: General Machinery LLC
Location: Detroit, MI
Mfr: Dreinstern
24 Stand Dreistern Roll Form Line:, 24 Roll Stands, Coil Width Max=20”, Max Material Thickness 1.5mm., Ultimate Tensile Strength Approx. 1150 N/mm2, Shaft Diameter 2.5”, Max Roll Tool Width=20 ½”, Vertical Spacing= 5”, Upper Shaft Adj= + 4.5”/ – 1”, Min Vertical Spacing ...more
Ardcor #MIOU-H-R, rollformer base, 30 HP, 1994
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Ardcor
Model: MIOU-H-R
Year: 1994
SERIAL NUMBER. 93-229, MODEL. MIOU-H-R, AGE. 1994, 24 STATION BASE, 24 5WW GEAR BOXES. 20:1, SHAFT SIZE. 2-3/4" X 1-1/4", MOTOR. 30 HORSEPOWER, NO ROLL STANDS, BASE WITH GEAR BOX.
5 Stand, Lockformer Pittsburgh, rollformer, 24 gauge
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
LOCKFORMER PITTSBURGH 24GA, Number of Stands. 5, Power. 0.3 hp.
14 Stand, Bradbury Shadow panel rollforming line, 3-1/2" arbor, 50" roll space
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Bradbury
NUMBER OF STANDS. 14, NUMBER OF RAFTS. 3 RAFTS OF 4, 1 OF 2, ARBOR DIAMETER. 3-1/2", ROLL SPACE. 50", HORIZONTAL CENTERS. 20", VERTICAL ADJUSTMENT. 5" - 10", EQUAL GEARING. YES, ENTRY GUIDES. YES, ADJUSTABLE, UNIVERSAL U JOINT DRIVE. YES, U JOINT DRIVE GEAR BOXES. YES, MOTOR. 60 HP, TOOLED FOR SHADOW & CENTENNIAL ...more
7 Stand, Lockformer #24, Cheek Bender, 20 Ga Mild Steel capacity, 24" Bend Length
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Model: 24
Lockformer No. 24 Cheek Bender #7425 #1, Capacity: 20 Ga Mild Steel (1.0mm), Bend Length: 24" (61cm), Note: Shims are required for 28 Ga and lighter material, Dimensions: 40"x12"x10", Weight: Approx. 96 lbs. (44kg).
12 Stand, Tishken #24-HMW-1-1/2, rollformer, 1-1/2" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13618-569, MODEL. 24-HMW-1-1/2", STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".
12 Stand, Tishken #24-HMW-1-1/2, rollformer, 1-1/2" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13619-669, MODEL. 24-HMW-1-1/2, STANDS. 12, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2".
JUST ADDED!
Lokformer Junior Pittsburgh 24 gauge, 30 FPM, power flanging attachment, portable stand on rollers
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
S:, Power flanging attachmentPortable stand on rollers, MODEL: 24 GA. JUNIOR, CAPACITY: 24 GA., SERIAL#: 18467, APPROX. MATERIAL USED: 1”, DEPTH OF POCKET: 5/16”, SPEED: 30 FPM approx., MAIN MOTOR: 1/3 HP, BASE: Included, WEIGHT: 200 LBS approx., DIMENSIONS (LxWxH): 31”x14”x47”, FOB ...more
15 Stand, Contour rafted rollformer, on 24 stand base, 1-1/2" shaft diameter, 10" roll space
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
SERIAL. FA046, NUMBER OF STANDS. 15 COMPLETE HEADS (1 HEAD MISSING SPINDLE AND OUTBOARD), DIAMETER OF SHAFTS.1-1/2", ROLL SPACE. 10", HORIZONTAL CENTERS. 8", VERTICAL RANGE. 4" TO 5-1/2", GEAR RATIO. 1 TO 1, RAFTED. 4 HEADS PER RAFT, SPEED. 0 TO 240 FPM, OPERATOR'S PEDISTAL. YES, MOTOR. 25 HORSEPOWER.
14 Stand, Tishken #24-HMW-1-1/2, rollformer, 1.5" shaft diameter, 9" horizontal centers, 4"-6" vertical centers, 8" rollspace, air clutch, variable speed drive
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 24-HMW-1-1/2
SERIAL. 13619-669, MODEL. 24-HMW-1-1/2, STANDS. 14, SHAFT DIAMETER. 1-1/2", HORIZONTAL CENTERS. 9", VERTICAL CENTERS. 4" TO 6", ROLL SPACE. 8", BASE TO BOTTOM SPINDLE. 4-1/2", AIR CLUTCH. YES, VARIABLE SPEED DRIVE. YES.
Morlin #2400, Morlin, 24 gauge, 35 FPM, floor stand w/ wheels
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Morlin
Model: 2400
S:, All forming head components are precision crafted using case hardened steel and needle bearings throughoutExclusive tuck-away power cord for easy portabilityFloor stand with wheels, MODEL: 2400, SERIAL#: EGL-4-00223, CAPACITY: 24-to-28-gauge material, SPEED: 35 fpm, MOTOR: 1/3 H.P., 115 Single phase, 5.4 AMPS, 60 ...more
24 Stand, Dahlstrom #400-18UD/400-6UD, rollformer, 1-1/2" shaft diameter, 14" roll space, 13.5" horizontal centers, 7" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Dahlstrom
Model: 400-18UD/400-6UD
UTUBE NUMBER: 4195, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 400-18 UD/400-6 UD, SERIAL NUMBER: 1211/1212, Number of Passes: 24, Line Direction: Right to Left, Roll Shaft Diameter: 1-1/2″, Roll Space: 14″, Horizontal Centers: 13-1/2″, Vertical Adjustment: 4″ – 7″, Line Speed: 110 FPM ...more
Tin Knocker #TK-Fourplex, S & Drive Rollformer, 1.06' width Cleat, 1.06' width Drive Cleat, 100 FPM, 5 HP, 230 V, new
Norman Machine Tool Ltd | Baltimore, MD
Category: Rollformers
Seller: Norman Machine Tool Ltd
Location: Baltimore, MD
Mfr: Tin Knocker
Model: TK-FOURPLEX
Tin Knocker TK Fourplex S & Drive Rollformer, Inventory # 9710, Model: TK Fourplex, View the Tin Knocker TK Fourplex Manual Here, The TK Fourplex comes standard with S and Drive rolls down the center to slit and feed S and Drive Cleats, turning scrap into useful product. Outboard rolls can be configured with one ...more
22/24 Stand, Tishken #24HW-S-3-1/2, Accelerator rollformer, 2-1/2" shaft diameter, 1999
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 24HW-S-3-1/2
Year: 1999
, SERIAL. 21939-299, YEAR NEW. 1999, MODEL. 24-HW-S-3-1/2, NUMBER OF STANDS. 22 (ON 24 STAND BASE), ARBOR SHARFT DIAMETER. 3-1/2", ROLL SPACE. 21", HORIZONTAL CENTERS. 14", VERTICAL ADJUSTMENT. 6-1/2" TO 8-3/8", LOWER SPINDLE TO BASE., GEARING. EQUAL, DIRECTION OF TRAVEL. LEFT TO RIGHT, FLOOR TO PASS LINE. 46" ...more
9 Stand, GMC #PL-18HEM, rollformer, 21 FPM, 4 HP, 220V., new
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: PL-18HEM
Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency., ISO 9001 certified, 4HP Heavy Duty AC ...more
23 Stand, Ardcor rollformer, 2.5" x 48", #3364
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Ardcor
Model: 3364
UTUBE NUMBER: 3364, MANUFACTURER: ARDCOR, MODEL NUMBER: F15-2-1/2-48, SERIAL NUMBER: 83-088, YEAR: 1983, Line Direction: Right to Left, Number of Passes: 24, Spindle Diameter: 2-1/2", Roll Space: 48", Horizontal Center: 16", Vertical Adjustment: 5" – 9", Base Top to Center Lower Spindle: 6-1/2", Spindle Key ...more
22/24 Stand, Tishken #24HW, rollformer, 14" roll space, 3.5" arbor, 1997
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Tishken
Model: 24HW
Year: 1997
SERIAL. 21939-299 YEAR NEW. 1999MODEL. 24-HW-S-3-1/2NUMBER OF STANDS. 22 (ON 24 STAND BASE)ARBOR SHARFT DIAMETER. 3-1/2"ROLL SPACE. 21"HORIZONTAL CENTERS. 14"VERTICAL ADJUSTMENT. 6-1/2" TO 8-3/8"LOWER SPINDLE TO BASE. GEARING. EQUALDIRECTION OF TRAVEL. LEFT TO RIGHTFLOOR TO PASS LINE. 46"OPERATOR CONTROLS. ...more
12 Stand, Bradbury & Tishken, duplex rollforming line, 37" W, 72" OD, 20"-24" ID, 3" roll space, 1-1/2" shaft diameter, (5) 3" roll diameter
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Bradbury & Tishken
UTUBE NUMBER: 3724, MANUFACTURER: BRADBURY, MODEL NUMBER: 130, SERIAL NUMBER: 35256, LINE :, Maximum Coil Weight: 20,000 Lbs., Coil ID Range: 20-24″, Maximum Coil OD: 72″, Line Orientation: Left to Right, Line Speed: 150 FPM, COMPLETE LINE :, Entry Coil Car:, L-Type, Uncoiler:, Capacity: 20,000 Lb. ...more
9 Stand, Yoder, rollformer, 24" roll space, 3" diameter arbors, 5.5"-10" vertical adj., 18" horizontal centers
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Yoder
Yoder Rollformer, Model M 2-1/2 S, -9 stands on 2 separate bases, -one 7 stand base with 2 stands, and 2 side guide stands, -one 8 stand base with 7 stands, and exit straightening fixture, -3" dia. Shafts, -26" Roll Space, -5.5" to 10" Vertical adjustment, -18" Horizonal centers, -8.5" base to CL of bottom shaft, -In ...more
12 Stand, Bradbury #D-2.5, rollformer, 24" roll space, R-L, 50 HP VFD drive, 1979, #64205
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: D-2.5
Year: 1979
SERIAL. 8409, MODEL. D-2.5, YEAR. 06/1979, LINE DIRECTION. R-L, NUMBER OF STANDS. 12, ROLL SPACE. 24", ARBOR DIAMETER. 2.5", HORIZONTAL CENTERS. 28", VERTICAL CENTERS. 6.5"-13.5", CENTER OF LOWER SPINDLE TO BASE. 11", MOTOR. 50HP VFD DRIVE.
Featured
22 Stand, Tekfab, rollformer, 24" capacity
U.S. Asset Exchange Llc | Grand Rapids, MI
Category: Rollformers
Seller: U.S. Asset Exchange Llc
Location: Grand Rapids, MI
Mfr: Tekfab
Year: 2023
2.5” shaft diameter, 22 passes, can be configured to 16., 24” roll space can also be configured to 22”, 18” horizontal centers., 6” – 11” vertical centers., 8.125” (base to CL bottom shaft)., 11 single output pinion boxes (each pinion drives two stations)., 11 idler gear ...more
12 Stand, Yoder #M1-1/2, rollformer, #70963
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M1-1/2
BASE STAND CAPACITY. 12, STAND WIDTH MAX. 16", HEAD THA FIT STAND. M-1-1/2.
20 Stand, RLM #RLM-FPE-3, rollformer, 3" spindle diameter, 20" roll space, 24" horizontal centers, 6-1/2"-12" vertical adj., 2025
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Model: RLM-FPE-3
Year: 2025
Rebuilt 20 Stand RLM Rollformer offers a 3" spindle diameter, 20" roll space, and 24" horizontal centers. a 50 HP motor and complete mechanical parts, this model is ideal for your rollforming needs., Rebuilt in 2026, NOTE: This is a 20 Stand Machine. We can build a machine with additional stands - P.O.R., 20 Stand - ...more
64 Stand, RLM rollformer, 3" spindle diameter, 20"-24" spindle, gearboxes & outboards stands
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Spindle Diameter: 3”, Roll Space: 20”-24", Vertical Adjustment: 6.5” - 12”, Table to Center of Bottom Spindle: 9 3/4”, (64) Total Stands including., - (51) Stands, top and bottom spindles driven., - (10) Stands, bottom spindle driven, compatible for gear linkage to drive top spindle., - ...more
12 Stand, Dahlstrom #300-220B, chain drive rollformer, 2" spindle diameter, R to L, #61088
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dahlstrom
Model: 300-220B
SERIAL. 6811, MODEL. 300-22OB, HAND OF MACHINE. RIGHT TO LEFT, SPINDLE DIAMETER. 2", ROLL SPACE. 24", VERTICAL SPACE. 5"-7", HORIZONTAL SPACE. 11", LOWER SPINDLE TO BASE. 6", ELECTRIC MOTOR & CONTROLS. YES, CHAIN DRIVEN. YES.
16 Stand, Bradbury #M-2-1/2.24.16, rollformer, 2-1/2" shaft diameter, 24" roll space, air clutch, chain drive, 30 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M-2-1/2.24.16
SERIAL. 9401 MODEL. M2-1/2-24-16NUMBER OF STANDS. 16SHAFT DIAMETER. 2-1/2"ROLL SPECE. 24"CENTER DISTANCE BETWEE STANDS. 17"LOWER SHAFT TO BASE. 7-1/2"VERTICAL ADJUSTMENT. 3"FORWARD & REVERSING. YES CHAIN DRIVE. YES AIR CLUTCH. YES MOTOR HORSEPOWER. 30.
10 Stand, Bradbury Duplex complete rollform line, 20000 lb., 20"-24" ID, 72" OD, L to R, 150 FPM, entry L type coil car, uncoiler with hold down roll, entry pinch rolls, 5 roll straightener, downlayer, exit conveyor
Galaxie Corporation | Wayne, MI
Category: Rollformers
Seller: Galaxie Corporation
Location: Wayne, MI
Mfr: Bradbury
, Max Coil Weight 20,000#, Coil ID 20-24", Max Coil OD 72", Line Orientation: Left to Right, Line Speed 150fpm, Complete Line with the Following Components:, Entry L-Type Coil Car, Uncoiler with Hold Down Roll, Entry Pinch Rolls, Five Roll Straightener, Hydraulic Punching Unit, Hydraulic Shear, Scissor Lift Conveyor ...more
12 Stand, Yoder #M2-1/2, base, #62279
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2-1/2
BASE MFG. YODER, BASE STAND CAPACITY. 12.
19 Stand, Ardcor, 23 stand base, 1.5" shafts, 12" roll space, 4"-5.750" vert, 10" horizontals
Roll Form Solutions Inc | Grand Haven, MI
Category: Rollformers
Seller: Roll Form Solutions Inc
Location: Grand Haven, MI
Mfr: Ardcor
14 Stand, Tishken #14-HXM-3-1/2, heavy duty rollformer, 3-1/2" arbor diameter, 24" roll space, 40 HP
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Tishken
Model: 14-HXM-3-1/2
MODEL. 14-HXW-3-1/2, NUMBER OF PASSES. 14 (8 & 6), ARBOR DIAMETER. 3-1/2", MAX ROLL SPACE. 24", VERTICAL ADJUSTMENT. 8" TO 11", HORIZONTAL CENTERS. 18", BASE TO BOTTOM SHAFT. 10", DIRECTION OF TRAVEL. R TO L, ENTRY EDGE GUIDES. YES, EXIT STRAIGHTENING HEAD. YES, CONTROL STATION. YES, MOTOR. 40 HP.
21 Stand, PM Machine Tool rollformer, 4-1/2" arbor, 60" roll space, egual gearing, #70354
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pm
SERIAL. 80-277, STANDS. 21 (ROOM FOR 24), ARBOR DIAMETER. 4-1/2", ROLL SPACE. 60", HORIZONTAL CENTERS. 24", VERTICAL ADJUSTMENT. 8" TO 14", CENTER OF BOTTOM SPINDLE TO BASE. 12", GEARING. EQUAL 1:1, ENTRY GUIDE. YES, PINCH FEED ROLLS. YES, CENTER DRIVE MACHINE. YES, HEAVY DUTY GEAR BOXES. YES.
10 Stand, Tishken, Rollformer, 1.5" rolls, 2" shaft, control
AM Industrial | Brook Park, OH
Category: Rollformers
Seller: AM Industrial
Location: Brook Park, OH
Mfr: Tishken
Tishken 10 Stand Roll Former - Used -AM23284, / Capabilities, 10 Stand, 1.5" Rolls, 2" Shaft, Control, 7' Wide, 6' Tall.
4 Stand, Yoder #M2, 4 stand on 14 head base rollformer, 14" roll space, 2" shaft, #62019
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
CAPACITY # OF STAND FOR BASE. 14, # OF COMPETE STAND FOR BASE. 8, # OF STANDS WITH OUT SUPPORTS. 4, # OF STANDS WITHOUT SHAFTS & SUPPORTS. 2, SHAFT DIAMETER. 2", ROLL SPACE. 14", ROLL SPACE CENTER. 12", ADJUSTMENT. 4 TO 7".
20 Stand, Dahlstrom #450-22OB, rollformer, 2" shaft diameter, 4.5"-5.75"vertical, 24" roll space, 10" horiz centers, 30-90 FPM
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dahlstrom
Model: 450-22OB
Dahlstrom Rollformer, -Model: 450-22 OB, -Stands: 20 on a 22 Stand Base, -Shaft Diameter: 2.00", -Vertical Adjustment: 4.50" - 5.75", -Roll Space: 24", -Horizontal Centers: 10", -Base to Center of Bottom Shaft: 5.50", -Floor to Top of Base: 34", -Speed Range: 30 - 90 FPM, -Electrics: 440 V/3 PH/60 HZ, -Operators ...more
8 Stand, Bradbury rollformer, 1-1/2" arbor, 10" width
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
NUMBER OF STAND. 8, ARBOR DIAMETER. 1-1/2", WIDTH. 10".
10 Stand, Yoder #M3-1/2, Rollformer, 10 passes, 3.5" spindle diameter, 19" roll space, 24" horizontal centers, R-L, 16.75:1, 100 HP, 1775 RPM, 260/130 amps, 220/440 Volts, 3PH
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Yoder
Model: M3-1/2
UTUBE NUMBER: 4212, MANUFACTURER: YODER, MODEL NUMBER: WH, SERIAL NUMBER: Y113862, Number of Passes: 10, Line Direction: Right to Left, Spindle Diameter: 3-1/2″, Roll Space: 19″, Horizontal Centers: 24″, Vertical Adjustment: 5″ – 12-1/2″, Base Top to Center Lower Spindle: 10″ ...more
12 Stand, Pearson #1-1/2, rollformer, 1-1/2" spindle diameter, 24" roll space, 10 HP, #57791
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Pearson
Model: 1-1/2
MODEL. 1-1/2, NUMBER OF STANDS. 12, ROLLSPACE. 24", BASE TO LOWER ARBOR CENTER. 3-1/2", ADJUSTMENT. 1/2", TOP ROLL VERTICAL:, MAX HEIGHT. 4-1/4", MIN CENTERS. 3-3/4", DIAMETER OF SPINDLE. 1-1/2", LINE DIRECTION. R-L, ENTRY AND EXIT PINCH ROLLS. YES, DRIVEN ENTRY HORIZONTAL CENTERS. 6-1/2" BETWEEN STANDS, TOOLED FOR ...more
18 Stand, B & K, rollforming line, 50" x 4" arbor, 60" OD, 20"-24" ID, 120 FPM, 2002
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: B & K
Year: 2002
Materials: Painted, Galvanized, Maximum Coil: 50" (Incoming), Thickness Range: 0.017" - 0.035", Maximum Yield: 80,000 PSI, Maximum Coil Weight: 13,000 lbs., Coil I.D.: 20" - 24" (Approx.), Maximum Coil O.D.: 60", Line Direction: Right to Left, Line Speed: 0 - 120 FPM, Max. Finished Bundle: 30,000# @ 55' ...more
61 Stand, RLM, rollformer, 3" spindle diameter, 25" spdl length, gearboxes & outboard stands
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Rlm
UTUBE NUMBER: 4071, MANUFACTURER: RLM, Number of Stands: 60+, Number of Gearboxes: 60+, Spindle Diameter: 3″ with 1/2″ Shaft Key, Spindle Length: 25″- 30″, Roll Space:, (55) Gearboxes: 20″, (4) Gearboxes: 22″, (4) Gearboxes: 24″, Equally Geared, Base to Lower Spindle: ...more
10 Stand, Rollformer, #76313
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
18 Stand, Yoder #M1-1/2, rollformer, 1-1/2" shaft diameter, 24" roll space, 11" horizontal centers, 7" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Yoder
Model: M1-1/2
UTUBE NUMBER: 4194, MANUFACTURER: YODER, MODEL NUMBER: M1-1/2, Number of Passes: 18, Line Direction: Right to Left, Roll Shaft Diameter: 1-1/2″, Roll Space: 24″, Horizontal Centers: 11″, Vertical Adjustment: 4-1/2″ – 7″, Base Top to Center Lower Shaft: 5-3/4″, Gearing: Equal ...more
7 Stand, Tishken rollformer
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
