AI-ranked results for 19 stand - closest matches first
4 Stand, Urafco #M-1-1/4-C, rollformer, 5" roll space, 1.25" shaft diameter, 1.75" vertical adj., 7" horizontal centers, V/C, pendant Control
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Model: M-1-1/4-C
5" ROLL SPACE, 1.25" DIAMETER SHAFT, LUBE PUMP, 1.75" VERTICAL ADJUSTMENT, 7" HORIZONTAL CENTERS, 4" BASE TO BOTTOM ROLL, VARIABLE SPEED, PENDANT.
14 Stand, Bradbury #320 Rafted Standing Seam 360/Standing Seam Panel II Rollformer, 3.5" arbor, 44" roll width, 1995
G-2000 | Toledo, OH
Category: Rollformers
Seller: G-2000
Location: Toledo, OH
Mfr: Bradbury
Model: 320
Year: 1995
MODEL.: RF420-3.5-44-14, NUMBER OF STANDS.: 10, ARBOR DIAMETER.: 3.5", MAX ROLL WIDTH.: 44", VERTICAL ADJUSTMENT.: 4-7/8" - 8-7/8", HORIZONTAL CENTERS.: 18", LINE SPEED.: 70-200 FPM, LINE DIRECTIONS.: LEFT TO RIGHT, HP.: 50, GEAR BOX RATIO.: 10:1, GEAR BOX RPM.: 1750, 14 STAND DUPLEX LOCKFORMER SS2 LIP PROFILE, 16 ...more
14 Stand, Dreistern #P1216-PE101, cantilivered rollformer, 2" shafts, 8-1/2" R/S, #61607
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P1216-PE101
MODEL. P1216-PE101, NUMBER OF STANDS. 14, DIAMETER SHAFTS. 2", ROLL SPACE. 8-1/2", DISTANCE BETWEEN SPINDLE CENTERS. 10", TOP OF BASE TO LOWER SPINDLE CENTER. 10", VERTICAL ADJUSTMENT. 4-1/2" TO 6-1/2", VARIABLE SPEED DRIVE. YES, SHAFT SUPPORTS. YES, CONTROL. E-TRAC WFC-HT AC INVERTER, MOTOR. 15 HP.
18 Stand, Tishken #18-MLW-1-1/2, Rollformer, 6" Roll Space, Air-Clutch, 20 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 18-MLW-1-1/2
SERIAL. 11878-65, MODEL. 18-MLW-1-1/2, NUMBER OF STANDS. 18, ROLLSPACE. 6", DIAMETER OF ARBORS. 1-1/2", CENTER DISTANCE BETWEEN STANDS. 8", ARBOR ADJUSTMENT. 4 TO 5, BASE TO CENTER OF LOWER ARBOR. 4", EQUAL GEARED., MAXIMUM HEIGTH THAT CAN BE ROLLED. 1-1/2", AIR CLUTCH. YES, COOLANT. YES, MOTOR, HORSEPOWER. 20.
9 Stand, Lockformer #Cleatformer, rollformer, 20-22 gauge, Snap Lock, 25 FPM, S/N 5030
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Lockformer
Model: CLEATFORMER
LOCKFORMER CLEATFORMER - (3 IN 1) ROLLFORMER # 7447 #1, Forming Stations - 5, Lock: Snap Lock, Capacity - 20-26 gauge, Depth of Pocket - 5/16" Uses approximately 1" of material, Hammer Over-edge Adjustability - 3/8, Forming Speed - 25 FPM, Motor - 3/4 HP, 115/230 volts, 60 cycle, single phase, A.C. 1,800 RPM.
Get email updates for newly added Rollformers
Rollformers (also known as roll forming machines) are used to shape sheet metal or strips into continuous profiles by passing them through a series of rollers. Commonly used in industries like construction, automotive, and manufacturing, they are ideal for producing parts like roofing panels, beams, and tubing. Rollformers are essential for efficiently creating uniform, high-quality metal profiles in large-scale production.
16 Stand, Tishken #16-HMW-1-3/4, rollformer, 1-3/4" spindle diameter, 12" roll space, L to R, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Tishken
Model: 16-HMW-1-3/4
SERIAL. 14685-473, MODEL. 16-HMW-1-3/4, NUMBER OF STANDS. 16, SPINDLE DIAMETER. 1/3/4", ROLL SPACE. 12", HORIZONTAL SPINDLE CENTER. 9", SPEEDS. 50 FPM, VERTICAL DISTANCE BETWEEN CENTER. 4-1/2" to 5-3/4", GEARS RUN IN OIL. YES, DIRECTION. LEFT TO RIGHT, MOTOR. 15 HORSEPOWER.
12 Stand, Dahlstrom #360-12OB, rollformer, 1-1/2" spindle diameter, 10" roll space, 8" horizontal center, 4"-5" vertical adj., #13854J
Timco Inc | Columbia, TN
Category: Rollformers
Seller: Timco Inc
Location: Columbia, TN
Mfr: Dahlstrom
Model: 360-12OB
DAHLSTROM 12 STAND ROLLFORMER, STOCK# 13854J, S/N 330, MDL#360-12 OB, NUMBER OF STANDS 12, SPINDLE DIA 1-1/2", ROLL SPACE 10", HORIZONTAL CENTER 8", VERTICAL ADJ 4" - 5", BASE TO CENTER LINE OF LOWER SPINDLE 4-1/2", 10 HP MOTOR, START/STOP, RUN/JOG BUTTONS, NEW AC DRIVE.
14 Stand, Contour #CR-A-M-1.5-20/24R, rollformer, 1-1/2" arbor, 10" roll space, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Contour
Model: CR-A-M-1.5-20/24R
SERIAL. FA076, MODEL. CR-A-M-1.5-20/24R, STANDS. 14, ARBOR DIAMETER. 1-1/2", VERTICAL ADJUSTMENT. 4 TO 5-1/2", ROLLSPACE. 10" MAXIMUM, HORIZONTAL SPACING. 8", GEAR RATIO. EQUAL 1:1, LOWER SPINDLE TO BASE. 6.5", SPEED. 0 TO 240 FPM, MOTOR HORSEPOWER. 15.
16 Stand, Bradbury #315-B, rollformer, 2.5" x 24", #2709
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Bradbury
Model: 315-B
UTUBE NUMBER: 2709, MANUFACTURER: BRADBURY, MODEL NUMBER: 315-B, SERIAL NUMBER: 32646, YEAR: 1997, Line Direction: Left to Right, Driven Stands: 16, Spindle Diameter: 2-1/2", Roll Space: 24", Vertical Adjustment: 4" – 5-1/2", Horizontal Centers: 9", Center Line of Lower Spindle to Base: 4", Entry Guide ...more
9 Stand, Fisher #MPF-1 Auto, dura fence panel rollforming line, uncoiler, cut-off shear
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: MPF-1
Make: Evalutioner, Co (Ukraine), Product: Fence Metal Panels, Number of Stands: 9, Material Thickness: 0.4mm 0.55mm, Motor: 1.5Kw, Speed: 10 meters per minute, Uncoiler, Coil Weight: 1.5 ton, Material Width: 350mm, Manual Mandrel, Coil Hold Down Arm, Feed Up Motor, Unit Weight: 282kg, 9 - Stand Roll Former, Chain ...more
20 Stand, RLM #RLM-FPE-3, rollformer, 3" spindle diameter, 20" roll space, 24" horizontal centers, 6-1/2"-12" vertical adj., 2025
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Rlm
Model: RLM-FPE-3
Year: 2025
Rebuilt 20 Stand RLM Rollformer offers a 3" spindle diameter, 20" roll space, and 24" horizontal centers. a 50 HP motor and complete mechanical parts, this model is ideal for your rollforming needs., Rebuilt in 2026, NOTE: This is a 20 Stand Machine. We can build a machine with additional stands - P.O.R., 20 Stand - ...more
6 Stand, B & K #1-1/2B, rollformer, 2" arbors, 10" roll space, 12" btwn stands, 3/8" keyway, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: B & K
Model: 1-1/2B
SERIAL. 113, MODEL. 1-1/2B, NUMBER OF STANDS. 6, ROLL SPACE. 10", DIAMETER OF ARBORS. 2", DISTANCE BETWEEN STANDS. 12", VERTICAL ADJUSTMENT. 5" TO 7-1/2", BASE TO BOTTOM OF SPINDLE. 5-3/4", KEYWAY SIZE. 3/8", PNEUMATIC SHEAR CUTOFF. YES, MOTOR. 10 HORSEPOWER, ** TOOLING ON MACHINE MAKES 1-1/4" DRYWALL CORNER BEAD.
24 Stand, Clinton, rollformer, 3" arbor, 46" roll space, 14" horizontal centers, 5.5"-7" vertical adj., 39" passline, exit side rolls w/ tooling
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
SERIAL. 1685 5-77, MODEL. 24 STAND DOOR PANEL, STANDS. 24, ARBOR. 3", ROLL SPACE. 46", CAPACITY.019" TO.035", HORIZONTAL CENTERS. 14", VERTICAL CENTERS. 5.5" TO 7", BASE TO LOWER SPINDLE. 5.5", DRIVE GEARBOXES. 4, GEARBOX RATIO. 15:1, PASS LINE. 39", EXIT SIDE ROLLS. YES WITH TOOLING, MOTOR. 40 HP DC WITH CONTROLS.
12 Stand, Tishken #12-MW-2, Rollformer, RL, 2" spindle, 8" roll space, 12" centers, AS IS
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
Model: 12-MW-2
, Manufacturer: Tishken, Number Of Stands: 12 (8 New Outboard Stands), Line Direction: Right To Left, Spindle Diameter: 2”, Roll Space: 8”, Horizontal Centers: 12”, Vertical Adjustment: 5.5” To 7”, Base Top To Center Lower Spindle: 5”, Spindle Key Size: 0.375”, Gearing: Equal ...more
20 Stand, Yoder #M3, rafted roll forming heads, 3 spindle diameter, 18" roll space, equal geared
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M3
TOTAL NUMBER OF STANDS. 20, NUMBER OF RAFTS. 5, STANDS PER RAFT. 4, SPINDLE DIAMETER. 3", ROLL SPACE. 18", HORIZONTAL DISTANCE BETWEEN SPINDLE. 24", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 10", MIN VERTICAL CENTER DISTANCE BTWN SPINDLES. 5-1/2", MAX VERTICAL CENTER DISTANCE BTWN SPINDLES. 9", EQUAL GEARED. YES.
Morlin #2400, Morlin, 24 gauge, 35 FPM, floor stand w/ wheels
Westway Machinery Ltd | Mississauga, ON
Category: Rollformers
Seller: Westway Machinery Ltd
Location: Mississauga, ON
Mfr: Morlin
Model: 2400
S:, All forming head components are precision crafted using case hardened steel and needle bearings throughoutExclusive tuck-away power cord for easy portabilityFloor stand with wheels, MODEL: 2400, SERIAL#: EGL-4-00223, CAPACITY: 24-to-28-gauge material, SPEED: 35 fpm, MOTOR: 1/3 H.P., 115 Single phase, 5.4 AMPS, 60 ...more
61 Stand, RLM, rollformer, 3" spindle diameter, 25" spdl length, gearboxes & outboard stands
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Rlm
UTUBE NUMBER: 4071, MANUFACTURER: RLM, Number of Stands: 60+, Number of Gearboxes: 60+, Spindle Diameter: 3″ with 1/2″ Shaft Key, Spindle Length: 25″- 30″, Roll Space:, (55) Gearboxes: 20″, (4) Gearboxes: 22″, (4) Gearboxes: 24″, Equally Geared, Base to Lower Spindle: ...more
16 Stand, Bradbury #M-2-1/2.24.16, rollformer, 2-1/2" shaft diameter, 24" roll space, air clutch, chain drive, 30 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M-2-1/2.24.16
SERIAL. 9401 MODEL. M2-1/2-24-16NUMBER OF STANDS. 16SHAFT DIAMETER. 2-1/2"ROLL SPECE. 24"CENTER DISTANCE BETWEE STANDS. 17"LOWER SHAFT TO BASE. 7-1/2"VERTICAL ADJUSTMENT. 3"FORWARD & REVERSING. YES CHAIN DRIVE. YES AIR CLUTCH. YES MOTOR HORSEPOWER. 30.
6 Stand, Bradbury #M1-1/2-86, rollformer, 14 gauge capacity, 1-1/2" arbor diameter, 8" roll space, pendant controls
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Bradbury
Model: M1-1/2-86
SERIAL. 315, MODEL. M 1-1/2 86, CAPACITY. 14 GA, NUMBER OF STAND. 6, ARBOR DIAMETER. 1-1/2", ROLL SPACE. 8", HORIZONTAL CENTERS. 13-1/2", VERTICAL ADJUSTMENT. 3", BASE TO LOWER SHAFT. 7", FLOOR TO PASS THRU LINE. 34", PENNANT CONTROL. YES.
20 Stand, Tishken Rollformer, 12" W, 24 Ga., 10000 lb. Capacity, Servomatic IV Feed, 15-1/2" Shut Height, 40 Ton, 3" Stroke, 45 SPM, AMS Control
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Tishken
, Width: 12", Stands: 20, Spindle Diameter: 2", Gauge range: 24 Gauge, Product: Access Door Back Panel, Includes:, Mandrel Uncoiler, -36" wide Mandrel Uncoiler, -10,000 Lbs. Weight Capacity, Servomatic IV Press Feed Unit, 40 Ton x 3" Rousselle Straight Side Press, -Model 4S56, -Shut Height: 15-1/2", -Tonnage: 40 ...more
20 Stand, Michigan #RMT-200-20, rollformer, 2" shaft diameter, 14" roll space, 50 HP, #74977
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Michigan
Model: RMT-200-20
SERIAL. 80829, MODEL. RMT-200-20, NUMBER OF STANDS. 20, SHAFT DIAMETER. 2", ROLL SPACE. 14", HORIZONTAL CENTERS. 15", LOWER SPINDLE CENTER TO BASE. 7-1/4", VERTICAL ADJUSTMENT. 4-1/2" TO 9", GEAR RATIO. 1 TO 1, AIR CLUTCH. WICHITA, VASRIABLE SPEED DRIVE. ALLEN BRADLEY 1336 PLUS, MOTOR HORSEPOWER. 50.
16 Stand, B & K, rollformer gearboxes w/ outboards, 1-1/2" spindle diameter, 12" rollspace, 4.5"-7.5" vertical adj
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
PRICE: $2,500 Per Gearbox, UTUBE NUMBER: 2944, MANUFACTURER: B&K, MODEL NUMBER:, SERIAL NUMBER:, YEAR:, (Per Gearbox), Spindle Diameter: 1-1/2", Roll Space: 12", Spindle Key Size: 1/4", Base Top to Center Lower Spindle: 7-1/4", Vertical Adjustment: 4-1/2" – 7-1/2", PRICE: $2,500.00 ...more
10 Stand, Tishken #28-HW-3, rollformer, 3" spindle diameter, 30" rollspace, 14" horizontal centers, 6.5"-8.5" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 28-HW-3
UTUBE NUMBER: 4065, MANUFACTURER: TISHKEN, MODEL NUMBER: 28-HW-3, SERIAL NUMBER: 17872-681, Number of Stands: 10, Line Direction: Left to Right, Spindle Diameter: 3″, Roll Space: 30″, Horizontal Centers: 14″, Vertical Adjustment: 6-1/2″ – 8-1/2″, Base Top to Center Lower Spindle: ...more
9 Stand, GMC #PL-18HEM, rollformer, 21 FPM, 4 HP, 220V., new
Wheeler Machinery Sales | Pomona, CA
Category: Rollformers
Seller: Wheeler Machinery Sales
Location: Pomona, CA
Mfr: Gmc
Model: PL-18HEM
Take your sheet metal work to the next level with the GMC Hemming Forming Machine, a reliable and versatile solution for professional fabricators. Designed for precision and durability, this machine is built to handle your hemming needs with ease, efficiency, and consistency., ISO 9001 certified, 4HP Heavy Duty AC ...more
12 Stand, Roll Form Design #2.5, rollformer, 2-1/2" spindle diameter, 12" roll space, 20 HP, 1994
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Roll Form Design
Model: 2.5
Year: 1994
SERIAL. 1951-175, MODEL. 2.5, YEAR NEW. 1994, NUMBER OF STANDS. 12, DIAMETER OF SPINDLES. 2-1/2", ROLL SPACE. 12", CENTER DISTANCE BETWEEN SHAFTS. 4" MIN; 7" MAX, BASE TO CENTERLINE OF LOWER SHAFT. 8-1/2", HORIZONTAL CENTER DISTANCE. 18", COOLANT. YES, AC VARIABLE SPEED DRIVE. COMMANDER, INDIVIDUAL GEAR BOXES. YES ...more
12 Stand, Ardcor #SF, Roll Former, R-L, 1-1/2" spindle diameter, 5-1/2" roll space, 10" horizontal center, 5-1/4" vertical adj.
National Machinery Exchange | Newark, NJ
Category: Rollformers
Seller: National Machinery Exchange
Location: Newark, NJ
Mfr: Ardcor
Model: SF
ARDCOR 12 STAND ROLL FORMER MODEL SF, SERIAL # 5134-A, 1964, Line Direction: Right to Left, Entry Guide, Number of Stands: 12, Roll Space: 5-1/2", Horizontal Centers: 10", Vertical Adjustment: 4" - 5-1/4", Spindle Diameter: 1-1/2", Spindle Ratio.Equal, Drive HSG Reduction Ratio.12:1, Base Coolant System, Main Drive ...more
7 Stand, Custom, cantilever-style rollformer, 1" shaft diameter, 3.75" roll diameter, 1.5" roll space
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Custom
UTUBE NUMBER: 3158, MANUFACTURER: CUSTOM, Panel Seamer, Line Direction: Right to Left, Shaft Diameter: 1", Number of Stands: 7, Roll Diameter: 3-3/4", Roll Space: 1-1/2", Horizontal Centers: 6", Vertical Adjustment: 3-1/2", Spindle Keyway Size: 1/4", Chain Driven, Motor: 2 HP, 208 / 230 / 460 ...more
12 Stand, Custom #FS1-6412-18, rollformer, 1-1/4" arbor, MP300, 8" horiz centers, 4" vertical centers, pinch rolls entry & exit from straight, 1993
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: FS1-6412-18
Year: 1993
MODEL: FS1-6412-18, S/N:931703, NEW: 1993, 12 STANDS, MP 300 CONTROL SYSTEMS, 1 3/4" ARBORS, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, 705 HP DRIVE, 3 OVER 3 DRIVEN STRAIGHTENER, PINCH ROLLS ENTRY AND EXIT FROM STRAIGHTENER, LFV FLYING AIR CUT-OFF, LISTING ID#25538.
7 Stand, Flagler dual head adjustable rollformer, to 52" W, 5HP, motorized adjustment, to 3/4" leg
Holland Machinery Company Inc | Miami, FL
Category: Rollformers
Seller: Holland Machinery Company Inc
Location: Miami, FL
Mfr: Flagler
ONE USED “FLAGLER CORP" ADJUSTABLE DUAL HEAD ROLLFORMING MACHINE, FORMING STATIONS 7 OPPOSED PAIRS, SARBOR SIZE 0.875" DIAMETER, MOTORIZED ADJUSTMNET 52", TOOLING TO FORM UP TO 3/4" LEGS, MOTOR 5 HP/220-440/3/60, GEAR BOX 10 TO 1 REDUCTION, ADJUSTMENT MOTOR 1/2 HP/220-440/3/60.
10 Stand, Bradbury #M3, 3" x 54", ribbed panel rollform line
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Bradbury
Model: M3
UTUBE NUMBER: 2910, MANUFACTURER: BRADBURY, MODEL NUMBER: M3, Number of Stands: 10, Line Direction: Right to Left, Spindle Diameter: 3″, Roll Space: 54″, Horizontal Center: 16″, Vertical Adjustment: 9″ – 10″, Base to Center Lower Spindle: 7-3/8″, Spindle Key Size: 1/2″ ...more
8 Stand, Yoder #M2-1/2, rollformer, 2-1/2" spindle diameter, 14" roll space, coolant
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2-1/2
SERIAL. Y4668166, MODEL. M-2-1/2, NUMBER OF STANDS. 7, BASE CAPACITY. 8 STANDS, ROLL SPACE. 14, DIAMETER OF SPINDLE. 2-1/2", HORIZONTAL DISTANCE BETWEEN SPINDLES. 18", CENTER DISTANCE BETWEEN SPINDLES. 5" MINIMUM 10" MAXIMUM, BASE TO CENTER OF BOTTOM SPINDLE. 9", UPPER SPINDLE ADJUSTMENT. 5", COOLANT. YES.
12 Stand, RFC #814-12, rollformer, 2-1/2" shaft diameter, 14" roll space, run & jog, 25 HP, #75396
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Rfc
Model: 814-12
SERIAL. 404, MODEL. 814-12, YEAR NEW. 12/1984, MATERIAL THICKNESS.125, NUMBER OF STANDS. 12, ROLL SPACE. 14", DIAMETER OF SHAFT. 2-1/2", CENTER DISTANCE BETWEEN SHAFTS. 4" MIN TO 7" MAX, BASE TO CENTERLINE OF LOWER SHAFT. 6", UPPER ARBOR ADJUSTMENT. 3", HORIZONTAL CENTER DISTANCE. 12", RUN & JOG. YES, FORWARD ...more
14 Stand, Dahlstrom #450-14-0B, rollformer, 1-3/4" roll shaft, 8" roll space, air clutch, 10 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dahlstrom
Model: 450-14-0B
SERIAL. 385, MODEL. 450-14-0B, NUMBER OF STANDS. 14, ROLL SHAFT DIAMETER. 1-3/4", NOMINAL ROLL SPACE. 8", HORIZONTAL CENTER DISTANCE. 10", VERTICAL CENTER DISTANCE. 4" TO 5-1/2", BASE TOP TO BOTTOM SPINDLE CENTER. 6", BASE HEIGHT. 34", SPEED RANGE. 40 TO 120 FPM, AIR CLUTCH. YES, MOTOR DRIVE MOTOR. 10, TOOLING ON ...more
14 Stand, ASC panel roll forming line with pre-cutoff & measuring system, 6'-42' long
VX Machinery | Sylvania, OH
Category: Rollformers
Seller: VX Machinery
Location: Sylvania, OH
Mfr: Asc
, Material: Galvanized, Galvalume, Pre-Painted, Thickness:.012” to.040”, 37” Between Housings, 2-3/4” Shaft, 3-1/2” OD, **Tooling for Roofing, Siding, Corrugated Materials (See pics), Includes:, - 36" Single-End Expanding Mandrel Uncoiler for 20” to 24” ID Coils, - ...more
12 Stand, Tishken #12-MW-2, rollformer, 2" spindle diameter, 8" roll space, 12" horizontal centers, 5.5"-7" vertical adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 12-MW-2
UTUBE NUMBER: 4163, MANUFACTURER: TISHKEN, MODEL NUMBER: 12-MW-2, SERIAL NUMBER: 4532-552, Number of Stands: 12 (8 New Outboard Stands), Line Direction: Right to Left, Spindle Diameter: 2″, Roll Space: 8″, Horizontal Centers: 12″, Vertical Adjustment: 5-1/2″ – 7″, Base Top to Center ...more
8 Stand, Engel #800, duplex rollformer, 20-26 gauge, 90 FPM, #A6547
Sterling Machinery Exchange | South El Monte, CA
Category: Rollformers
Seller: Sterling Machinery Exchange
Location: South El Monte, CA
Mfr: Engel
Model: 800
Capacity 20-26 gauge Depth of Pocket / Size For Slip 1-1/16" Depth of Pocket / Size For Drive 1-1/8" Speed 90 feet per minute Motor / Voltage 5HP, 230/460 volts, 60 cycle, 3 phase, A.C. 1,800 RPM. Dimensions (L x W x H) 48" x 24" x 42" Stands 8 Stands.
7 Stand, Yoder #M2-1/2, rollformer, 2-1/2" shaft diameter, 14" roll space, side pass rolls, 60 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2-1/2
SERIAL. Y4435-265, MODEL. M-2-1/2, NUMBER OF PASSES. 7, SHAFT DIAMETER. 2-1/2", ROLL SPACE. 14", HORIZONTAL ROLL CENTERS. 18", CENTER OF LOWER SHAFT TO BASE. 8-1/2", VERTICAL SHAFT ADJUSTMENT. 4" TO 7", ENTRY EDGE GUIDE. YES, SCARFER. YES, SIDE PASS ROLLS. YES, SINGLE POINT ADJUSTMENT. YES, MOTOR. 60 HORSEPOWER.
12 Stand, Bradbury #D3-30-12, rollformer, 4" arbor diameter, 30" roll space, air clutch & brake, 60 HP
Perfection Global | Elk Grove Village, IL
Category: Rollformers
Seller: Perfection Global
Location: Elk Grove Village, IL
Mfr: Bradbury
Model: D3-30-12
Number of Stands: 12Tooling Arbor Diameter: 4"Roll Space: 30"Vertical Adjustment: 7" - 13.5"Distance Between Horizontal Centers: 28"Drive Motor: 60 HPMotor Speed: 1750 RPM, 4 Speed Transmission (2.6/1.9/1.33/1.00:1)Air Clutch & Break(4) Power Driven Upper Arbor Stands.
28/30 Stand, Dreistern #P915-P1815, rafted type U joint drive rollformer, 1986, #61598
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Dreistern
Model: P9SP-1815
Year: 1986
SERIAL. 86-2-62, NEW. 1986, MODEL. P915-P1815, NUMBER OF STANDS. 28 ON 30 STAND BASE, SHAFT DIAMETER. 1-1/2", ROLL SPACE. 12", VERTICAL ADJUSTMENT. 3" TO 5-1/4", BASE TOP TO LOWER SPINDLE CENTER. 4-1/2", RAFTED. YES, UNIVERSAL JOINT DRIVE. YES, EQUAL AND UNEQUAL GEAR BOXES. YES, VARIABLE SPEED DRIVE CONTROL. T B WOODS ...more
8 Stand, Contour #100-8-6, rollformer, 1" arbor diameter, 8" roll space, equal geared, variable speed
D & D Industries Inc | Monclova, OH
Category: Rollformers
Seller: D & D Industries Inc
Location: Monclova, OH
Mfr: Contour
Model: 100-8-6
MODEL#: 100-8-6, SERIAL#: 82-004, 8 STANDS, 1" ARBOR DIAMETER, 8" ROLLSPACE, 6" HORIZONTAL CENTERS, 4" - 5-3/4" VERTICAL ADJUSTMENT, 5-1/2" LOWER SPINDLE TO BASE, EQUAL GEARED, VARIABLE SPEED, 2 AXIS ENTRY GUIDES, COOLANT, 5 BUTTON CONTROL, 7-1/2 HP MOTOR, PNEUMATIC CUT OFF PRESS:, SERIAL #: PPP 131-54, ADJUSTABLE BASE.
9 Stand, Dahlstrom, 2" dia.spindle, 30" roll space, air clutch, 30 HP, used, #7840
Universal Press & Machinery (UPM) | Ferndale, MI
Category: Rollformers
Seller: Universal Press & Machinery (UPM)
Location: Ferndale, MI
Mfr: Dahlstrom
Spindles: 9, Spindle Diameter: 2, Roll Space: 30, Horizontal Centers: 24, Vertical adjustment: 5.5 - 9, Top of Base to Center of Bottom Spindle: 8 1/4, (1) Extra Spindle Box & Shafts, Air Clutch, Main Drive Motor (30 HP), Push Button Controls, AMS #MP-300 Series Length Console Control, Approximate Dimensions: 21 L ...more
10 Stand, Dahlstrom, cantilever rollformer, 1.25" spindle diameter, 3.5" rollspace, 6.5" horizontal centers, 3.5"-4.5" adj.
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Dahlstrom
UTUBE NUMBER: 3567, MANUFACTURER: DAHLSTROM, MODEL NUMBER: 350-10, SERIAL NUMBER: 315, Number of Stands: 10, Line Direction: Right to Left, Spindle Diameter: 1-1/4″, Roll Space: 3-1/2″, Horizontal Center: 6-1/2″, Adjustment: 3-1/2″ – 4-1/2″, Base Top to Center Lower Spindles: ...more
10 Stand, Fisher #SL-1, snap lock roll former
Midwest Machinery LLC | Livonia, MI
Category: Rollformers
Seller: Midwest Machinery LLC
Location: Livonia, MI
Mfr: Fisher
Model: SL-1
Main Technical Data:, Dimensions: Main Technical Data:, Dimensions: 1600x850x1000mm, Weight: 400 kg, Motor Power: 1.5kw, Voltage: 380V/50Hz/3PH or 220-240V/50-60Hz, Forming Stands: 10, Forming Steel Thickness: 0.4-0.7mm, Forming Aluminum Thickness: 0.7-1.0mm, Lock Height: 26mm or 31mm, Tolerance: +-1mm, Roller ...more
10 Stand, Foshan #DH100, rollformer with pre-punches, 2" dis shafts, 9" roll space, 7.3 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Foshan
Model: DH100
SERIAL. 201705, MODEL. DH100, YEAR NEW. 2017, NUMBER OF STANDS. 10, DIAMETER OF SHAFTS. 2", ROLL SPACE. 9", HORIZONTAL CENTERS. 7.5"", BASE TO CENTER OF LOWER SHAFT. 8", VERTICAL ROLL ADJUSTMENT. 1", SPEED VARIABLE. MITSUBISHI, FORWARD AND REVERSING. YES, NUMBER OF 4 POST PRESS PUNCHES. 2, NUMBER OF 4 POST CUTOFF ...more
12 Stand, Tishken #12M2-2, rollformer, 2" x 6, #3424
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: Tishken
Model: 12M2-2
UTUBE NUMBER: 3424, MANUFACTURER: TISHKEN, MODEL NUMBER: 12 M2 2, SERIAL NUMBER: 333 938, YEAR: 1938, Line Direction: Left to Right, Number of Passes: 12, Spindle Diameter: 2″, Roll Space: 6″, Horizontal Center: 11″, Vertical Adjustment: 5″ – 7″, Base Top to Center of Lower Spindle: ...more
16 Stand, Van Huffel, 1.5" dia arbor, 30 HP, 210 FPM, rollformer, 6" dia arbor roll space, #10499
Yoder Brothers Machinery | Toledo, OH
Category: Rollformers
Seller: Yoder Brothers Machinery
Location: Toledo, OH
Mfr: Van Huffel
Roll Diameter1.5 inchesNumber of Stands16 Diameter of Arbor1.5 inchesPower30 horsepower, NUMBER OF STANDS. 16, ARBOR DIAMETER. 1.5", ROLL SPACE. 6", VERTICAL ADJUSTMENT. 4” to 6”, HORIZONTAL CENTERS. 9”, SIDE PASS ROLLS. 16 (1 BETWEEN EACH STAND), BASE TO LOWER CENTER. ...more
7 Stand, Yoder #M2, rollformer, 2" spindle diameter, 13" roll space, 12" horizontal between spindles, 15 HP
Yoder Machinery Sales | Holland, OH
Category: Rollformers
Seller: Yoder Machinery Sales
Location: Holland, OH
Mfr: Yoder
Model: M2
SERIAL. Y12354, MODEL. M2, NUMBER OF STANDS (PASSES). 7, DIAMETER OF SPINDLES. 2", ROLL SPACE. 13", HORIZONTAL DISTANCE BETWEEN SPINDLES. 12", DISTANCE BASE TO CENTER OF LOWER SPINDLE. 7", VERTICAL CENTER DISTANCE BETWEEN SPINDLES. 4" MIN, 7" MAX, UPPER SPINDLE ADJUSTMENT. 3", GEARING., CUTOFF PRESS. AIRAM, CUTOFF ...more
12 Stand, Custom #4800-12, rollformer, 1-1/4" arbor, MP300, 8" horizontal centers, 4" vertical centers,, pneumatic pinch rolls, 1999, S/N 991203
Die-Matic Tool & Machinery Inc. | Meridianville, AL
Category: Rollformers
Seller: Die-Matic Tool & Machinery Inc.
Location: Meridianville, AL
Mfr: Custom
Model: 4800-12
Year: 1999
CUSTOM ROLL FORM / FORMER, MODEL: 4800-12, S/N: 991203, NEW:1999, 12 STANDS, 1 1/4" ARBORS, MP300 CONTROL, 8" HORIZONTAL CENTERS, 4" VERTICAL CENTERS WITH 1" ADJUSTMENT, VERIABLE TO 14 1/2" DIE SPACE, 7 1/2 HP MAIN DRIVE, 3 OVER DRIVEN STRAIGHTENER, PNEUMATIC PINCH ROLLS, LFV AIR ACTUATED FLYING CUT-OFF.
20 Stand, Dahlstrom #450-22OB, rollformer, 2" shaft diameter, 4.5"-5.75"vertical, 24" roll space, 10" horiz centers, 30-90 FPM
D & H Machinery Inc | Toledo, OH
Category: Rollformers
Seller: D & H Machinery Inc
Location: Toledo, OH
Mfr: Dahlstrom
Model: 450-22OB
Dahlstrom Rollformer, -Model: 450-22 OB, -Stands: 20 on a 22 Stand Base, -Shaft Diameter: 2.00", -Vertical Adjustment: 4.50" - 5.75", -Roll Space: 24", -Horizontal Centers: 10", -Base to Center of Bottom Shaft: 5.50", -Floor to Top of Base: 34", -Speed Range: 30 - 90 FPM, -Electrics: 440 V/3 PH/60 HZ, -Operators ...more
10 Stand, B & K / MV, rollforming line, 10" roll space, 12" horizontal centers, 4" -5" vertical adj., 1.25" spindle diameter, 38" passline, 150 FPM
Universal Tube & Rollform | Perrysburg, OH
Category: Rollformers
Seller: Universal Tube & Rollform
Location: Perrysburg, OH
Mfr: B & K
UTUBE NUMBER: 3086, MANUFACTURER: B&K/MV, Number of Stands: 10, Line Direction: Right to Left, Roll Space: 10″, Horizontal Centers: 12″, Vertical Adjustment: 4″ – 5″, Base to Center Lower Spindle: 4″, Spindle Diameter: 1-1/4″, Base Working Surface: 26-1/2″, Base ...more
