Enderezadoras y Cortadoras de Alambre

Vendedor: FH Machinery Inc

Ubicación: Ivyland, PA

Fabricante: Shuster

Modelo: 1V18

Wire Diameter Range.035" -.125" Speed Range20 - 150 FPM Max Cutoff Length12" Motor2 HP Electrics220V/3/60 Approx. Weight2,500 lbs Approx. Floor Size3"W x 15" L.

.035" -.135" Shuster #1V18, straight-cut, with batch accumulator take-up, 12' max cut-off

Fil Metallique Lyva Inc | Marieville, QC

450-46... (Show) 450-460-5368

Vendedor: Fil Metallique Lyva Inc

Ubicación: Marieville, QC

Fabricante: Shuster

Modelo: 1V18

Año: 1969

For wire.035''-.135'', New control box, motor, and take-up in 2014, Electrical : 220v, Single phase.

3/64" Nilson #1B, rotary straightener, 10 blocks for straightening, foot pedal motor starter, 1968

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Nilson

Modelo: 1B

Año: 1968

One Used 3/64" Nilson Model 1B Rotary Straightener, S/N-87755, New 1968,.020 -.050 Min/Max Wire Diameter, Rotor RPM - 55/70/8500, 10 Blocks for Straighteneing, Foot Pedal Motor Starter, Electrics: 1 HP AC Motor & Controls, Weight: 350#, Dimensions: 2' X 3', F.O.B. Bridgeport, CT Whse.

.05" Nilson #1B, Wire Straightener, 1/4 x 3/8 squaring rotor block size, 10 block

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Nilson

Modelo: 1B

NILSON #1B-ROS WIRE DRAWER, MACHINE #. 1, WIRE RANGE. 0.050 TO 0.015, ROTOR BLOCK SIZE. 1/4 x 3/8 sq, # OF BLOCKS REQ. 10, H.D. REQUIRED. 1/2, FULL LOAD RPM. 7,700, O.A. DIM. APPROX: 43" X 26" X 55", WEIGHT APPROX.: 555 Lbs.

2 fotos

.05" Nilson #1B-ROS, Rotary Oscilating Wire Straightener, 1/4 x 3/8 squaring rotor block size, 10 block

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Nilson

Modelo: 1B-ROS

NILSON #1B-ROS OSCILATING WIRE STRIGHTENER, MACHINE #. 1, WIRE RANGE. 0.050 TO 0.015, ROTOR BLOCK SIZE. 1/4 x 3/8 sq, # OF BLOCKS REQ. 10, H.D. REQUIRED. 1/2, FULL LOAD RPM. 7,700.

Reciba actualizaciones por correo electrónico de los recién agregados Enderezadoras y Cortadoras de Alambre

Las enderezadoras y cortadoras de alambre (también conocidas como máquinas enderezadoras y cortadoras de alambre) están diseñadas para enderezar el alambre y cortarlo a longitudes precisas. Comúnmente usadas en industrias como manufactura, construcción y automotriz, estas máquinas garantizan una calidad de alambre consistente y dimensiones precisas. Las enderezadoras y cortadoras de alambre mejoran la eficiencia y reducen el desperdicio de material, siendo esenciales para aplicaciones de procesamiento de alambre en grandes volúmenes.

.06" Bundgens #UDI/350, Wire Straightener & Cutoff, 132.2" length, 1.37" stroke per infeed, 2.75" stroke, 91.8 FPM, 1970

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Modelo: UDI/350

Año: 1970

, WIRE CAPACITY.004" -.060", MIN. WIRE LENGTH. 210mm - 8.26", MAX. WIRE LENGTH. 3360mm - 132.2", STROKE PER INFEED SLIDE. 35mm - 1.37", MAX. STROKE. 70mm TOTAL (2.75"), MAX. RATE (WIRE SPEED). 28m/MIN - 91.8 FPM, STATIONARY CO., WIRE REEL, 7-DIE ROTARY STRAIGHTENER, GRIP FEED, (2) BOXES: MISC PARTS, MOTOR DRIVE: 1.5 ...más

.062" -.187" Shuster #1AVS-3, straighten & cut, 3' cutoff length, 3 HP, 20-200 FPM, Micro switch trip

FH Machinery Inc | Ivyland, PA

Vendedor: FH Machinery Inc

Ubicación: Ivyland, PA

Fabricante: Shuster

Modelo: 1AVS-3

Wire Diameter Range.062" -.187" Max Cutoff Length3" Speed Range20 - 200 FPM Motor3 HP Electrics220 V Dimensions3" W x 7" L x 4" H, Micro Switch Trip.

.062" -.187" Shuster #1AVS3, straight-cut with batch accumulator take-up, 12' max cut-off

Fil Metallique Lyva Inc | Marieville, QC

450-46... (Show) 450-460-5368

Vendedor: Fil Metallique Lyva Inc

Ubicación: Marieville, QC

Fabricante: Shuster

Modelo: 1AVS3

Año: 1971

For wire.062''-.187'', Max lenght 12ft., Electrical: 220v, Single phase, New control box, motor, takeup accumulator in 2014 (little use since then).

4 fotos

.062" -.250" Shuster #1AVS5, enderezado y corte, 50-200 FPM, 5 HP, 1994

Victory Machinery Exchange | Lake Forest, IL

847-91... (Show) 847-918-9797

Vendedor: Victory Machinery Exchange

Ubicación: Lake Forest, IL

Fabricante: Shuster

Modelo: 1AVS5

Año: 1994

Especificaciones del catálogo:, Diámetro de alambre Mínimo: .062" Alambre básico Máximo: .250" Alambre básico Configurado para alimentar: 50 a 200 fpm Motor: 5 hp Longitud máxima de corte: Ver abajo, Equipado con:, EQUIPADO CON:DIÁMETRO DE ALAMBRE: .062" - .250"VELOCIDAD: 20 - 200 FPMCORTE MÁX.: 10' BASTIDOR13'11" DE ...más

1/16" - 5/16" Lewis #2CV4, wire straigthen & cut-off machine, 5-rotary die head, 20' rack, 65-200 FPM

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Lewis

Modelo: 2CV4

LEWIS #2CV4 WIRE STRAIGHTEN AND CUT, CAPACITY 1/16" TO 5/16", 5 ROTARY DIE HEAD, 20' RACK, 65-200 FPM, W/MOTOR& CONTROLS.

1/16" - 3/16" Shuster #1A, wire straighten & cut-off machine, 5-rotary die, 10' rack, 20-200 FPM

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Shuster

Modelo: 1A

SHUSTER #1A WIRE STRAIGHTEN AND CUT OFF MACHINE, CAPACITY 1/16" TO 3/16" WIRE DIAMETER, 5 ROTARY DIE, 10' RACK, 20-200 FPM, W/MOTOR &CONTROLS.

4 fotos

.093" x .250" Schuster #IAVS5, wire straightener & cutting machine, 8' length of cut, 36" pass line

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Schuster

Modelo: IAVS5

MANUFACTURER - SCHUSTER CAPACITY, TYPE - WIRE STRAIGHT AND CUT MACHINE, MODEL NUMBER - 1AVS5, CAPACITY - 0.093" X.250" MILD STEEL, LENGTH OF RACK - 8', PASS LINE - 36".

.118" Hariton #WSC-102A, automatic wire straightening & cutoff machine, brand new, 2015

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Hariton

Modelo: WSC-102A

Año: 2015

Wire Diameter 1.5-3.0(m/m) Cut Length 30-1800 (m/m) Motor Cutting 1 HP Straightening 2HP Feeding 1/2 HP 8-48 M/min, CE standard auto control box, 120Kg, Setting Length Lever Two Sets, Wire Carrier, Notes: machine is :, 1. Tool Box one set per each machine, 2. Operating Manual and Circuit control box 1 pc per machine ...más

1/8" Lewis #1CG, wire straighten & cut-off machine, 22' runout rack, 2 exit rolls, 35-150 FPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Lewis

Modelo: 1CG

Min/Max Wire Diameter Range 1/32" - 1/8" FPM 35-150 Electricals AC Motor and Controls Weight 3500 Lbs., 22' Runout Rack, 2 Exit Rolls, Vari Speed Gear Box.

.125" -.312" Schuster #2A4V, wire straightener & cut-off wire machine, 3' length of cut, 20-300 FPM, 1986

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Schuster

Modelo: 2A4V

Año: 1986

SCHUSTER #2A4V WIRE STRAIGHT & CUT MACHINE, MANUFACTURER - SCHUSTER, TYPE - WIRE STRAIGHT AND CUT MACHINE, MODEL - #2A4V, YEAR - 1986, MILD STEEL CAPACITY -.125" -.312", LENGTH OF RACK - 12', FPM - 20 - 300.

1/8" Shuster #1V18, wire straightener & cut off, 12" max cutoff length, 20-150 FPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 1V18

Año: 1973

1/8" Shuster Model 1V18 Wire Straighter and Cutoff Machine, Brand, SHUSTER, Model, 1V18, Type, Wire Straighteners & Cut-Offs, Stock #, 12964, Condition, Used, Year, 1973, Min/Max Wire Diameter Range.035"-.125" Maximum Cutoff Length 12' FPM 20-150 Motor 2 Horse Power Electricals 220 Volts 3 Phase 60 Cycle Weight ...más

1/8" x 60" Shuster #1V18, wire straightener & cut-off machine, 20-150 FPM, 2-exit rolls, 1984

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 1V18

Año: 1984

Min/Max Wire Diameter Range.035-.125" Maximum Cutoff Length 5' FPM 20-150 Electricals AC Motor and Control Weight 2500 Lbs., 2 Exit Rolls, Electric Trip.

Enderezadora de alambre y cortadora Shuster de .125" -.312", #2A4V, 20-200 FPM, 15HP, dados extra, #31099

Prestige Equipment Corp | Philadelphia, PA

631-24... (Show) 631-249-5566

Vendedor: Prestige Equipment Corp

Ubicación: Philadelphia, PA

Fabricante: Shuster

Modelo: 2A4V

CAPACIDAD:, Capacidad, alambre básico: .125-.312 diám., Velocidad de avance (variable): 20-2000 FPM, Longitud de cremallera: 120", Equipado con:, Motor principal de 15 HP, Matrices de rodillo adicionales.

.125" -.312" Shuster #2A4V, enderezado y corte, 20-200 FPM, 15 HP, 1979

Victory Machinery Exchange | Lake Forest, IL

847-91... (Show) 847-918-9797

Vendedor: Victory Machinery Exchange

Ubicación: Lake Forest, IL

Fabricante: Shuster

Modelo: 2A4V

Año: 1979

Especificaciones del catálogo:, Capacidad: .125" - .312"Longitud de corte: Ver abajo Velocidades: 20 - 200 FPM Enderezador de árbol rotatorio de 5 Alojamiento de alimentación totalmente cerrado de 4 rodillos 2 palancas de presión de alimentación tipo leva Impulsor de velocidad variable para alimentación, Equipado ...más

.125" -.312" Shuster #600V, twin arbor wire straigthening & cutting machine, 25-265 FPM

FH Machinery Inc | Ivyland, PA

Vendedor: FH Machinery Inc

Ubicación: Ivyland, PA

Fabricante: Shuster

Modelo: 600V

Wire Diameter Range.062" to.187" (High Tensile) Wire Diameter Range.125" to.312" (Mild Steel) Speed Range25 to 265 FPM Maximum LengthWill cut up to 40" Electrics480V, Two Counter Rotating 5 Station High Speed Arbors.

8 fotos

1/8" - 5/16" Shuster #2A4V, wire straightener / cutoff, variable speed drive, straightening head, 28-200 FPM, 480 V., 3-phase, #A3334

Sterling Machinery Exchange | South El Monte, CA

626-44... (Show) 626-444-0311

Vendedor: Sterling Machinery Exchange

Ubicación: South El Monte, CA

Modelo: 2A4V

Wire Diameter.125" -.312" Speed Range (Variable) 28 - 200 FPM Voltage 480V ~ 3 Phase WEIGHT 2,400 Lbs. s Vari Speed Drive Straightening Head.

.135" Shuster #18SFT, dual arbor wire straightener, Allen Bradley Powerflex 4 drives, 25-150 FPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 18SFT

One Used Shuster Model 18SFT Dual Arbor Wire Straightener, Serial No 18SFT-115-93,.030" -.080" High Tensile Capacity,.040" -.135" Mild Steel Capacity, 25-150 FPM ( Speed Range), Electrics: 240 Volts, Allen Bradley Powerflex 4 Drives, Dual Arbors and On Casters, Located FOB Pennsylvania Warehouse.

5/32" -3/8" Lewis #8F, wire straightener & cut-off, 42" length, 95-195 FPM, AC motor, #69477

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Lewis

Modelo: 8F

MODEL. 8F, CAPACITY. 5/32" TO 3/8", FEED RANGE. 95' TO 195' PER MINUTE, HEIGHT TO CENTER OF WIRE. 43-11/16", MAX CUT OF LENGTH. 42", CUTTING LENGTH. 11" MINIMUM LENGTH WITHOUT SLIPPING FEED ROLLS, MOTOR. A.C. MOTOR & CONTROLS.

5/32" -3/8" Lewis #8F, travel cut wire straightener, 5 pairs of rolls, 11' table length, 25 HP

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Lewis

Modelo: 8F

SERIAL. 106, MODEL. 8F, CAPACITY. 5/32" TO 3/8", HEIGHT TO CENTER OF WIRE. 43-11/16", CUTTING LENGTH MINIMUM. 11", SPEED. 110, 130,155,170, & 200 FPM, NUMBER OF ROLLS.5 PAIRS, TABLE LENGHT.11', FLYING CUTOFF., MOTOR. 25 HORSEPOWER.

.157" -.375" Shuster #2ABV, straighten & cut, 22' cutoff length, 28-300 FPM, 20 HP, 480 V.

FH Machinery Inc | Ivyland, PA

Vendedor: FH Machinery Inc

Ubicación: Ivyland, PA

Fabricante: Shuster

Modelo: 2ABV

Wire Diameter Range.157" -.375" Max Cutoff Length22" Speed Range28 - 300 FPM Motor20 HP Electrics480 V.

.162" -.312" Ergon #MELC3-8, wire straightener & cut-off, 1"-144" length, 2 feed rolls, 6 HP

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Ergon

Modelo: MELC3-8

SERIAL. M08 100, MODEL. MELC 3-8, CAPACITY.162 TO.312 (5/16), MINIMUM LENGHT. 1", MAX LENGHT. 144", ROTARY STRAIGHTENER. YES, FEED ROLLS. 2, FLYING CUTOFF. YES, VOLTAGE. 220, HYD FEED ROLL MOTOR IS NEW, MAIN MOTOR. 6 HORSEPOWER.

.162" Tishken #FL2-CO2, aplanado, enderezado y corte de alambre, de derecha a izquierda, 1982, #17995

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Tishken

Modelo: FL2-CO2

Año: 1982

SERIE ..................... 18328-882, AÑO ........................ 1982, MODELO....................... FL2-CO2, CAPACIDAD DE ENTRADA DE HILO........ .162" DIÁMETRO (8 GA.), RESISTENCIA A LA TENSIÓN DE 150 KSI:, APLANADO A................. .095 GRUESO X .210" ANCHO, LONGITUD MÁXIMA DE CORTE....... 10, DIRECCIÓN DEL ...más

.187" Nilson #3, rotary arbor straightener

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Nilson

Modelo: 3

Wire Diameter.093"-.187" Electrics 220 Volts AC Motor and Controls Weight 400#.

.187" Shuster #32SF1, dual arbor wire straightener, Allen Bradley PowerFlex 4 drives, 25-200 FPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 32SF1

One Used Shuster Model 32SF1 Dual Arbor Wire Straightener, Serial No 32SF1-227-81,.062" -.187" Wire Range, 25 to 200 FPM; Speed Range, Allen Bradley Power Flex 4 Drives, Dual Arbor and On Casters, Located FOB Pennsylvania Warehouse.

3/16" Lewis #3F, wire straighten & cutoff machine, 42" runout rack, 200 FPM, flying shear

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Lewis

Modelo: 3F

One Used 3/16" Lewis Model 3F Wire Straighten and Cutoff Machine, Serial No 192, 3/16" Maximum Cutoff Diameter,.078" Minimum Cutoff Diameter, 42" Runout Rack, 200 FPM, 8 Entrance Rolls, 2 Exit Rolls and Flying Shear, AC Motor and Controls, Located FOB Bridgeport CT Warehouse.

3/16" Lewis #3F, straightener & cut-off machine, 42" runout rack, 200 FPM, flying shear

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Lewis

Modelo: 3F

3/16" Lewis Model 3F Wire Straighten and Cutoff Machine, Serial No 192, 3/16" Maximum Cutoff Diameter,.078" Minimum Cutoff Diameter, 42" Runout Rack, 200 FPM, 8 Entrance Rolls, 2 Exit Rolls and Flying Shear, AC Motor and Controls.

3/16" Shuster #400V, enderezador de alambre y corte, alambre de alta tensión de .045"-.125", alambre de acero suave de .062"-.187", longitud máx. de corte de 30", 20-200 PPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 400V

3/16" Shuster Model 400V Wire Straightening and Cutting Machine, Brand, SHUSTER, Model, 400V, Type, Wire Straighteners & Cut-Offs, Stock #, 12796, Condition, Used, High Tensile Wire.045"-.125" Mild Steel Wire.062"-.187" Maximum Cutoff Length 30' FPM 20-200 Electricals 220v AC Motor and Controls Twin Counter Rotary ...más

8 fotos

.2" -.5" RMG #LS-1205, Single-Plane Wire Straightener, 4" V-grooved roll diameter, 5 rolls/plate

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Rmg

Modelo: LS-1205

Wire Range to cover.200" (5.08mm ) to.500 (12.7mm) V-Grooved Rolls Diameter 4.0" (101.6mm) diameter, 5 Rolls per Plate, Cover with Safety Switch, Elevated Base for 37.00" Wire Line Height, Entrance Wire Guide Holder, Delrin Guide Die.

¡RECIÉN AGREGADO!

.25" G. C. Patterson Machine, wire cutter, counter, power switch, Dongan transformer

HGR24 | Euclid, OH

216-48... (Show) 216-485-2976

Vendedor: HGR24

Ubicación: Euclid, OH

Fabricante: G. C. Patterson Machine

COUNTER, POWER SWITCH, DONGAN TRANSFORMER.

1/4" Lewis #2-C, wire straightener & cutoff machine, 12' runout rack, 100 FPM, 2 HP

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Lewis

Modelo: 2-C

One Used 1/4" Lewis Model 2C Wire Straightener and Cutoff Machine, 1/4" Maximum Wire Diameter, 100 FPM, 12' Runout Rack, Electrical Equipment and Controls:, 2 HP AC Motor and Controls, Weight: 2,500 Lbs., FOB Bridgeport, CT Warehouse.

1/4" Lewis #2-C3, wire straightener & cutoff machine, 2-plane straightener, AC motor

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Lewis

Modelo: 2-C3

Diameter 1/4" Electrics AC Motor Weight 1500 Lbs., 2 Plane Straightener.

1/4" Lewis #2CV-Shut Height, wire straightener & cutoff, 4 feed rolls, 7.5 HP, 65-200 FPM, #75366

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Lewis

Modelo: 2CV-SH

SERIAL. 2CV-5C697, MODEL. 2CV-SH, CAPACITY SQUARE & HEXAGON. 1/16 TO 1/4", CAPACITY FLATS. 1/2 WIDE, SPEED. 65 TO 200 FMP INFINITELY VARIABLE, MINIMUM LENGTH. 1", STRATIGHTENING ARBOR. YES, FEED ROLLS. 4, RUN OUT ARMS. YES, MOTOR HORSEPOWER. 7-1/2.

1/4" Lewis #4F, straight & cut machine with 12' rack, 200 FPM

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Lewis

Modelo: 4F

1/4" LEWIS 4F STRAIGHT AND CUT MACHINE W/ 12' RACK, MANUFACTURER - LEWIS, TYPE - STRAIGHT AND CUT MACHINE, MODEL - 4F, CAPACITY - 1/4" (6MM), MAX RACK LENGTH - 12', SPEED - 200 FPM.

Enderezadora de alambre y máquina de corte Lewis 1/4" #4FHA, longitud de bastidor de 13', 400 FPM, rodillo de entrada 2, enderezadora rotativa de 5 matrices, rodillo de salida 2

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Lewis

Modelo: 4FHA

LAS ESPECIFICACIONES ESTÁN SUJETAS A VERIFICACIÓN POR PARTE DEL COMPRADOR.

1/4" -1/2" Lewis #9FHA, straight & cut, 20' rack, 0-400 FPM

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Lewis

Modelo: 9FHA

MANUFACTURER - LEWIS, TYPE - STRAIGHT AND CUT MACHINE, MODEL - 9FHA, CAPACITY - 1/4" - 1/2", FEET RATE - 0 - 400 FPM, RACK - 20 FOOT, INCLUDES:, 6 ROLL ENTRY PINCH ROLLS, 10 ROLL EXIT PINCH ROLLS, CONTROLS AND MOTOR, FLYING SHEAR CUTOFF.

1/4" Takashima #TB-1, enderezadora de alambre de alta velocidad y cortadora, 100-240 FPM, #70798

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Lewis

Modelo: TB-1

Año: 1983

SERIE ..................... 5172, MODELO ...................... TB-1, CAPACIDAD ................... 1/4", VELOCIDAD DE AVANCE ................. 100 - 240 FPM, LARGO DE CORTE .............. 20'.

¡RECIÉN AGREGADO!

.25" Lewis Machine #2CG, wire cutter, Dayton counter, power switch, 1.25 A

HGR24 | Euclid, OH

216-48... (Show) 216-485-2976

Vendedor: HGR24

Ubicación: Euclid, OH

Fabricante: Lewis Machine

Modelo: 2CG

DAYTON COUNTER, POWER SWITCH, 1.25 A.

1/4" Patterson #1975, Wire Straightener & Cutoff Machine, S/N M9028

G-2000 | Toledo, OH

419-59... (Show) 419-597-5495

Vendedor: G-2000

Ubicación: Toledo, OH

Fabricante: Patterson

Modelo: 1975

SERIAL. M9028, MODEL. 1975, CAPACITY. 1/4", Machine Type.Wire Machinery (Other) Manufacturer.PATTERSON Model.1975 Year.N/A Condition.Used.

Shuster #1AVS de 1/4", corte de 12', enderezadora rotativa de 5 dados de 11", velocidad variable, 1980

D & D Industries Inc | Monclova, OH

419-86... (Show) 419-866-6894

Vendedor: D & D Industries Inc

Ubicación: Monclova, OH

Fabricante: Shuster

Modelo: 1AVS

Año: 1980

Equipado con, MODELO #: 1AVS, NÚMERO DE SERIE #: 1AVS3-543-80, CAPACIDAD DE ALAMBRE .062"-.250, MÁXIMA LONGITUD DE CORTE 60", ENDEREZADOR ROTATORIO DE 5 DADOS DE 11", VELOCIDAD VARIABLE, 2 RODILLOS DE ALIMENTACIÓN, 20-200 FPM, OBJETIVO DE MICROINTERRUPTOR, AÑO: 1980, COSTO NUEVO $41,000.00, DIMENSIONES GENERALES ...más

11 fotos Video

1/4" Shuster #1AVS-5, wire straightener & cutoff machine, 3' max cutoff length, 20-200 FPM

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 1AVS-5

Wire Diameter Range.062-.250 FPM 20-200 Maximum Cutoff Length 3' Electrics AC Motor and Controls Weight 2000 Lbs., Electric Trip, 2 Exit Rolls, Parts Counter, Variable Speed Drive.

1/4" Shuster #1AVS-5, Wire Straightener & Cutoff Machine, 8' max. cutoff length, 5 HP

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 1AVS-5

Wire Diameter Range.093" -.250" Maximum Cutoff Length 8' Motor 5 HP, Extra Tooling.

.25" Shuster #1AVS5, wire straightener & c ut-off, 20-200 FPM, 10' cutoff rack, 5 HP, 1994

National Machinery Exchange | Newark, NJ

Vendedor: National Machinery Exchange

Ubicación: Newark, NJ

Fabricante: Shuster

Modelo: 1AVS5

Año: 1994

WIRE DIA:.062" -.250", SPEED: 20 - 200 FPM, MAX. CUT-OFF: 10' RACK, 13'11" Long X 4' Wide X 4'3" High and weighs 2,050 lbs., 5HP motor, 208-22-440 vac. 3-Phase @ 60hz. 1735 RPM.

1/4" Shuster #2A4EV75L, wire straighten & cutoff machine, 3' longest cut, 28-300 FPM, 2012

Hariton Machinery Co Inc | Bridgeport, CT

Vendedor: Hariton Machinery Co Inc

Ubicación: Bridgeport, CT

Fabricante: Shuster

Modelo: 2A4EV75L

Año: 2012

Capacity.093"-.250" FPM (feed speeds) 28 to 300 Longest Cut 3', AC Tech Electronic Variable Speed Drive, 4 Exit Rolls, Left Hand Machine.

Enderezadora y cortadora de alambre Shuster #2A4V de 1/4", 2 rodillos de alimentación, 7-1/2 HP, 1990, #69121

Yoder Machinery Sales | Holland, OH

Vendedor: Yoder Machinery Sales

Ubicación: Holland, OH

Fabricante: Shuster

Modelo: 2A4V

Año: 1990

SERIE ....................... 604-90, MODELO ........................ 2A4V, AÑO ..................... 1990, CAPACIDAD DE DIÁMETRO DE ALAMBRE ....... .125" A .312" (1/8" A 5/16"), VELOCIDAD (VARIABLE) ............. 20 A 300 FPM, MÁXIMO DE CORTES POR MINUTO ........... 140, LONGITUD MÁXIMA DE CORTE ............ 48", RODILLOS DE ALIMENTACIÓN ..... ............. 2, VELOCIDAD VARIABLE ............... SÍ, DISPARO ELÉCTRICO ................ SÍ, MOTOR ........................ 7-1/2 HP.