38 Results
Anderson Machine #BP800, Capacity Sorter w/Elevator, Stainless Steel, 42" x 40.5" x 21.5" feed hopper, 20" width conveyor w/2.25" spacing between cleats, 1/2 HP, 1725 RPM, 90 V
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Anderson Machine
Model: BP800
Anderson Machine Works cap sorter with elevator. Unit is Model BP800 with 1/2 HP, 90V, 1725 HP drive to reducer. Unit is stainless steel, includes speed controller, feed hopper measures 42" x 40-1/2" x 21-1/2" deep, with belt conveyor on bottom. Conveyor measures 20" wide, spacing between cleats is 2-1/4". Good ...more
Anderson Machine, Rotary Capacity Lidder w/conveyor, 3-1/4" width x 73" L conveyor, 100/200/300 mm, 1/2 HP, 1725 RPM, 90 V
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Anderson Machine
Anderson Machine Works cap lidder. Unit has a rotary capper/lidder with conveyor, measuring 3-1/4" wide x 73" long. Capper is 12-head unit, stainless steel. Lidder has control box, stop/start control panel and is driven by a GE 1/2 HP, 90V, 1725 RPM drive to Flex-a-line gearbox. Includes (3) sets - 100 mm, 200mm and ...more
CMI, Screw Capper, 4-1/2" width x 84" L Stainless Steel belt conveyor, 1" diameter Screw head
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Cmi
CMI Screw Capper with stainless steel belt conveyor, capper Type NMRV-040, Serial number 00000 5075977. Approximately 1" diameter screw head. Complete with manual speed controls. Mounted on casters. Includes Hillekes stainless steel belt conveyor measuring 4-1/2" wide X 84" long. Previously used in pharmaceutical ...more
Dillin, Manually Operated Steam Capper, 115/230 V
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Dillin
Dillin Steam Capper - Manually operated with integrated steam pressure gauge and manual lift. Mounted on a stainless steel table with caster wheels. Driven by a 115/230V, 3/60Hz motor. Serial number 2095., Basis: FOB.
Eastern #CB104, bottle capper, vibratory feeder, 180 caps/min, max capacity size of 60mm, hopper
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Eastern
Model: CB104
Eastern Machine bottle capper with vibratory feeder model CB104. Unit has nominal capacity of 180 caps/min, max cap size of 60mm. Unit run by 1/2 hp, 90 volt. Hopper dims of 29" long x 25" wide x 9" tall with 21" dia feeder, 115v. Bottle grip lane is 31" long x 2-1/2" wide, adjustable. Last used on cap sizes 23, 28 ...more
Get email updates for newly added Neck Banders and Cappers
Neck banders and cappers (also known as sealing and capping machines) are specialized equipment used in industries like food, pharmaceuticals, and cosmetics to apply tamper-evident seals and secure caps on bottles and containers. By tightly sealing and capping products, these machines ensure product integrity and freshness.
ELF #ACT600R, Inline Capper/Torquer Machine, 6-Spindle, adjustable gripper belts, 25-110 mm Caps
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Elf
Model: ACT600R
ELF (Electronic Liquid Fillers) Model ACT600E Capper is a high-speed 6-spindle inline capper / torquer machine with adjustable side gripper belts. Designed for efficient capping. Precision and durability ensure a secure seal, minimizing leakage. The user-friendly interface allows easy setup and customization of ...more
Filamatic #Cubitainer-System, 2 head filler & 2 head capper, Stainless Steel, 2009
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Filamatic
Model: CUBITAINER-SYSTEM
Year: 2009
Filamatic CUBITAINER filling and capping machine, 2-station lobe pump filler with valve-in-top nozzles, stainless steel construction. Set up to fill 18-liter containers. Filling system is 3-stage linear with servo driven filling, including (2) positive displacement pumps. Offered with inline 2-head capper including ...more
Genesis #RW-250SS, Rotary Vial Capper, (6) Pockets, 2-1/2" width x 10' L belt conveyor, 120 V, 1997
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Genesis
Model: RW-250SS
Year: 1997
Genesis Machinery model RW-250SS Rotary Vial Capper, includes (6) Pockets for capping. Vials are conveyed on 2-1/2" wide x 10' long stainless steel belt conveyor. Previously used on 10ml vials. New in 1997. Machine# R 328. Rated for 120V, 60Hz, 1-phase., Basis: FOB.
Inline Filling Systems, inline chuck screw capper w/automatic sorter & bul
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Inline Filling Systems
Inline Chuck Screw Capper with automatic sorter and bulk hopper. The machine will automatically sort and feed caps from a bulk hopper and deliver them to cap applicator. The applicator takes the cap from the chute escapement and places it onto the container. It then inserts the cap into the cap retainer, securing it ...more
Inline Filling Systems, Single Head Capper, 20 CPM, 92 mm Capacity, 80 psig air, 110 VAC
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Inline Filling Systems
Inline Filling Systems single head capper. Unit set up for 92 mm caps, single lane feed with star wheel feed. Unit electricals are 110 Vac with 80 PSIG air. Rated for approximately 20 CPM. Capper s 304 stainless steel tubular frame, serial number 12330. Capper is. Capacity: 20 CPM., Capacity: 20 CPM, Basis: FOB.
Jet Flow #B057380310, Capacity Feeder, 4" discharge chute, 45" x 33" x 24" hopper, 2.5 HP, 3450 RPM, 208/230/460 V, qty. 2
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Jet Flow
Model: B057380310
(2) Jet Flow Cap Feeder Model B057380310 - Consists of two units with stainless steel contact parts. Includes a 4" discharge chute, 45" x 33" x 24" hopper, Syntron magnetic feeder, blower, and 2.5 HP, 3450 RPM drive., Basis: Each, FOB, Hopper Dimensions: 45" x 33" x 24".
Kaps-All #B, Capper, 4.5" width x 8' L belt, w/ Stainless Steel hopper
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kaps-All
Model: B
Kaps-All capper, model B, includes snap-on cap attachment, serial number 2907. Belt measures 4.50" wide X 8' long complete with with feed systems, model FSRS-4 cap sorter/feeder, serial number 1162, includes small stainless steel hopper. Previously used to place snap-on caps onto spice bottles., Basis: FOB.
Kaps-All #F-E4, Inline Spindle Capper, 4-Spindle
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kaps-All
Model: F-E4
Kaps-All Inline Spindle Capper - Model F-E4. A versatile four-spindle capper designed for efficient bottling operations. Controllers not included. Serial number 6870..
Kinex #SA-2000, Semi-Automatic Table-Top Capper, 10-130 mm Capacity, 14" max bottle height, 90-125 psi, de-capper
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kinex
Model: SA 2000
Semi-Automatic Table-Top Capper, manufactured by Kinex, Model SA 2000, rated for 10-130 mm caps, 14" maximum bottle height, torque range 2-125 inch pounds, pneumatically driven, air requirements: 90-125 PSI, stainless steel and aluminum construction. Reversible design, can also be used as de-capper. Serial number ...more
KP Aerofill #125-UP-2, aerosol automatic lidder with stainless steel lid, 400 CPM
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Kp Aerofill
Model: 125-UP-2
KP Aerofill automatic Lidder with stainless steel lid feeding system, Model 125-UP-2, used to place lids on top of spray paint cans. Set up to be used with explosion proof (XP) aerosol filling system. Lid feeder includes 32" x 40" x 30" deep stainless steel hopper with steep sloped sides, feeding belt conveyor to ...more
New Jersey Apache #550S, automatic bottle capping machine
TNT Industrial | Orange, CA
Category: Neck Banders and Cappers
Seller: TNT Industrial
Location: Orange, CA
Mfr: New Jersey
Model: 550S
Find many great new & used options and get the best deals for NEW JERSEY "APACHE" MODEL 550S AUTOMATIC BOTTLE CAPPING MACHINE. Free shipping for many products!.
Inline Filling Systems, Bulk Elevator Capacity Feeder/Sorter, 92 mm Caps, 10 cu.ft. Stainless Steel capacity bin, 12" width belt, 7 cfm, 80 psig air, 110 VAC
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Other
Inline Filling Systems bulk elevator cap feeder/sorter set for 92 mm caps. Unit s approximately 10-cubic foot stainless steel cap bin, complete with incline elevator and 12" wide belt. Last run with IFS single head capper. Unit requires 110 vac, electrics and 7 CFM OF 80 PSIG air. Belt Width: 12" Wide, Hopper. ...more
Pack West #Auto200, Automatic Screw Capping Machine, 200 containers/min., 2-tier stabilizing belt
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pack West
Model: AUTO200
Pack West Auto 200 8-Quill automatic screw capping machine, serial number T-8-A/C-LR-0390, Left-to-Right Machine. Rated up to approximately 200 containers/minute, unit has variable speed controls for sorter, gripper belts discs for tightening. With 2 tier stabilizing belts, helpful for taller containers. Capper has ...more
PDC #FC-400, Tamper Evident Shrink Bands, 2.5"-6.75" dia. x 1"-2" H food & dairy tubs @ 400 bands/min.
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Pdc
Model: FC-400
PDC Model FC-400 applies tamper evident shrink bands to large diameter food and dairy tubs from 2-1/2" diameter to 6-3/4" with band height 1" - 2" at 400 bands per minute. Unit is currently set for 5-1/2" diameter x 1" high bands. Tubs move thru machine continuously, do not need to stop to receive bands. Unit is fully ...more
Pharma Pack #PCT-2008T, rotary press on capper, 480 V., 4.19 KW, serial #CT1502041, 2015
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Pharma Pack
Model: PCT-2008T
Year: 2015
Pharma Pack Rotary Press-On Capper, Model PCT-2008T. s operate on 480V, 60Hz, with 4.19 kW power usage. Air consumption of 0.5-0.7 MPa ensures efficient operation., Previous Use: Cosmetics, Basis: FOB, Capper Type: Pump Capper.
Pharma Pack, Stainless Steel incline cleated capacity elevator, 10" wide belt, 9' high
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Pharma Pack
Pharma Pack Stainless Steel Incline Cleated Cap Elevator - Designed with a 10" wide belt and height of 9 feet to efficiently transport caps to a sorter., Materials of Construction: Stainless Steel, Basis: FOB, Belt Width: 10", Belt Height: 9 Feet.
Resina #LC-89-Spec, Capper, 20-60 CPM, 58 mm capacity on 2" bottles, 2-1/4" width x 70" L discharge conveyor, 1/2 oz to 2 gallon, 1/2 HP, 220/440 V, 1989
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Resina
Model: LC 89 SPEC
Year: 1989
Capper, Resina, model LC 89 Spec, set for 58mm cap on 2" bottles. Unit complete with infeed and discharge conveyor, 2-1/4" wide x 70" long, with cap feed. Unit has start/stop control 1/2 HP 220/440V, type SC motor. Capable of 1/2 oz to 2 gal, 20 to 60 CPM depending on size of container. Serial number 55-1489. Unit is ...more
Resina #S-30, Screw Capper, Stainless Steel hopper & feeder, 460 V
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Resina
Model: S-30
Resina Model S-30 single-head screw capper with double gripper. Includes stainless steel hopper and vibratory feeder bowl delivering plastic spice caps to the capping head. Previously used for 38 mm closures on spice bottles. Wired for 460V, 3-phase. Serial number 84-6553. Suitable for compact filling lines., Basis: ...more
Resina #U40-282, inline spindle screw capper with capacity feeder, serial #67 3884
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Resina
Model: U40-282
Resina Inline Spindle Screw Capper with Cap Feeder. Model U40 282, serial number 67 3884, previously used in a cosmetics manufacturing facility., Previous Use: Cosmetics, Basis: FOB, Capper Type: Screw Capper.
Resina #UN40-1250, inline 4-spindle screw capper with capacity elevator &, serial #94 7274
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Resina
Model: UN40-1250
Resina Inline Screw Capper, Model UN40 1250 - 4-spindle capper a cap elevator and hopper. Currently set up for 20mm caps. Serial number 94 7274. Previously used in a cosmetics manufacturing facility., Previous Use: Cosmetics, Basis: FOB, Capper Type: Screw Capper, Number of Spindles: 4.
Resina, inline 3-spindle screw capper with capacity feeder
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Resina
Resina Inline 3-Spindle Screw Capper. Comes with a cap feeder. Previously used in cosmetics manufacturing for efficient bottling operation., Previous Use: Cosmetics, Basis: FOB, Capper Type: Screw Capper, Number of Spindles: 3.
Resina, inline 4-spindle screw capper with capacity feeder
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Resina
Resina Inline 4-Spindle Screw Capper. Includes a cap feeder. Previously used in cosmetics manufacturing for high-speed capping. Serial number unavailable., Previous Use: Cosmetics, Basis: FOB, Capper Type: Screw Capper, Number of Spindles: 4.
Schymanski type #Ram-3000, wine capsule applicator, single head, semi-automatic, bottle gripper, bottle stopper & feed chute, 1990
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Schymanski
Model: RAM-3000
Year: 1990
Wine capsule applicator, single head, semi-automatic, includes bottle gripper, bottle stopper, & feed chute. Manufactured by Schymanski, type Ram 3000, machine# 211, new in 1990. Appears to be. Last used to place wine capsules over necks of sake bottles., Basis: FOB.
Silgan White #SWC500-1LH, lug capper, Stainless steel, 2010
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Silgan White
Model: SWC500-1LH
Year: 2010
Silgan White Cap Model SWC 500-1 LH automatic lug capper designed for precise mechanical or vacuum-style closure of twist-off or lug caps on glass or PET containers. Used under steam / vacuum. Constructed in stainless steel with enclosed guarding, infeed and discharge conveyors, and integrated control cabinet. ...more
SureKap #SK6000, Screw Capper, 6-Spindle, handles 400/410/CRC caps from 24-58 mm, 115 V
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Surekap
Model: SK6000
SureKap Model SK-6000 Inline Fully Automatic Six Spindle Screw Capper, Capper s six spindles, two sets of mechanical clutches, front knob adjustments, elevator, and feeder. Serial number CA-11984. Manufacturer info: This capper is designed for special applications and high speeds. Capper handles 400, 410 and CRC caps ...more
SureKap #SK6000-BF6, 6-Spindle Inline Capper, 2014
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Surekap
Model: SK6000-BF6
Year: 2014
Sure Kap 6-Spindle Inline Capper - Model SK6000 BF6. Purchased new in 2014 and removed from service on 10/10/22. Serial number unavailable..
THC #HC-A, Semi-Automatic ROPP Capping System, 20-40 mm Capacity w/ 50-180 mm bottle height, 1/4 HP, 1720 RPM, 220/110 V, 1995
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: Thc
Model: HC-A
Year: 1995
Semi-Automatic Roll On Pilfer Proof (ROPP) Capping System, Model HC-A, manufactured by THC (Taiwan Hon Chuang Enterprise). Handles cap sizes 20-40 mm with bottle heights ranging from 50-180 mm. s adjustable height with capping head rise and fall speed, suitable for ROPP caps. Driven by 1/4 HP, 220/110 Volts, 1720 RPM ...more
TotalPack #DS-200A, automatic inline capper, 6 spindles, 150 bottles/minute
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: Totalpack
Model: DS-200A
TotalPack DS-200A Spindle Inline Capper, operates at up to 150 bottles per minute, handling cap diameters from 25mm to 120mm (1" to 4.72"), bottle diameters from 30mm to 200mm (1.18" to 7.87"), and bottle heights between 50mm and 280mm (1.97" to 11.02"). The overall dimensions are 48"x40"x72" with a weight of 750 lbs. ...more
Westinghouse #PW500, capper, pilferproof, 24-120 container/minute, 8 pocket star wheel
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Mfr: West
Model: PW500
The West Model PW500 Pilferproof Capper ROPP (Roll-On Pilfer-Proof) caps onto containers at a rate ranging from 24 to 120 containers per minute, depending on materials, application, and container pocket configuration. It accommodates cap sizes ranging from 11mm to 38mm and container sizes from 21mm to 54mm in diameter ...more
West #RW500F, Capper, 12-Head rotary crimp capper, 50-300 BPM, 30-12 mm H & 13-5 mm diameter
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Mfr: West
Model: RW500F
West model RW500F capper, 12 head rotary crimp capper. Un is rated at speeds from 50-300 bpm, Height from 30-12MM and 13-5 MM dia. Unit is less conveyor and bottle guides. Includes removable top mounted centrifugal cap feeder. Less cap chute from sorter to shoe., Basis: FOB.
Capper Screw Machine, 8-Spindle, Gripper belts, 1.532" diameter x 1.062" H capacity
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Capper Screw Machine with 8 Spindle and Gripper Belts. Unit has AC variable speed control for sorter with gripper belts and 2 tier stabilizing belts. Cap size 1.532" diameter x 1.062" high. Less conveyor., Basis: FOB.
Capacity Feeder, Stainless Steel, 39" x 13" x 34" deep Hopper, set up for 4" diameter Caps for 64-ounce jars, 50" H infeed, 62" H discharge, 100-150 caps/min., 40-60 psi air, 110 VDC
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: Brisbane, CA
Stainless steel cap feeder with stainless steel hopper. Hopper measures 39" x 13" x 34" deep with infeed height of 50" and discharge height of 62" high. Caps are conveyed on vertical elevator with cleats. Set up to run 4" diameter caps for 64-ounce jars. Rated for output of 100 to 150 caps per minute depending on cap ...more
Automatic inline 3-spindle screw capper with capacity elevator & hopper
Machinery & Equipment Co | Brisbane, CA
Category: Neck Banders and Cappers
Seller: Machinery & Equipment Co
Location: San Dimas, CA
Automatic Inline 3-Spindle Screw Capper. Includes a cap elevator and hopper. Previously used in a cosmetics manufacturing facility for reliable capping operations. Serial number unavailable., Previous Use: Cosmetics, Basis: FOB, Capper Type: Screw Capper, Number of Spindles: 3.
