5351 - 5400 of first 10000 listings
Fanuc I/O Interface Board A20B-0008-0540
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in Fanuc Series 6A and 6B CNC machining centers and turning centers, the A20B-0008-0540 is a discrete I/O interface board designed to handle machine tool input and output signal routing within the control system. This board carries part number A20B-0008-0540 with revision /01A and board reference ...more
Fanuc Servo Amplifier Module A06B-6290-H104 400V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This is a Fanuc A06B-6290-H104 Alpha iSV 40HV-B servo amplifier module, a single-axis drive in the Fanuc alphai SV-B high-voltage series designed for use in Fanuc 30i, 31i, and 32i series CNC control platforms. The unit accepts a DC bus input of 537 to 679V at 9.8A (rated at 565V) and a 24V DC control supply. Maximum ...more
Fanuc Servo Amplifier Unit A06B-6089-H106 200-230V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This Fanuc A06B-6089-H106 Servo Amplifier Unit is a three-phase AC servo drive manufactured by Fanuc Ltd, Yamanashi, Japan. The nameplate confirms a rated input of 200 to 230V AC, 27A at 200V, 50/60Hz, three-phase, with a maximum output voltage of 230V AC and a rated output current of 52.2A (L axis). The unit carries ...more
Fanuc Velocity Control Unit A06B-6047-H003 m00598
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A06B-6047-H003 is a DC Velocity Control Unit manufactured by Fanuc Ltd in Japan. Part of Fanuc's 6047 series single-axis DC servo drive lineup, this unit is commonly associated with yellow-cap DC servo motors in the M series, including the 10M model, and is widely found in CNC machining centers and ...more
Fanuc Master Control Board Assembly A20B-0008-0410
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in Fanuc Series 6 CNC machining centers and turning centers, the A20B-0008-0410 is the master control board for the Fanuc 6M and 6T Model B control systems, including the 6B, 6MB, and 6TB configurations. This listing includes the A20B-0008-0410 master board mounted in its original chassis frame along with three ...more
Get email updates for newly added Electrical MRO Components & Parts
Electrical MRO (Maintenance, Repair, and Operations) refers to the equipment, tools, and parts used to maintain and repair electrical systems and machinery in industrial, commercial, and institutional settings. These parts are critical for ensuring that electrical systems run efficiently, safely, and without interruption. MRO supplies include everything from wiring, fuses, and relays to more complex components like motors, circuit breakers, and AC drives.
FANUC Servo Drive A06B-6089-H106
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A06B-6089-H106 is an Alpha series SVU1-130 servo amplifier unit manufactured by Fanuc Ltd in Yamanashi, Japan. It carries series designation B as shown on the nameplate. This unit is designed for use with Fanuc Series 0 CNC controls a PWM type B axes interface and is the largest capacity amplifier in the SVU ...more
Fanuc Input Unit A14B-0061-B103-03 200V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Fanuc Ltd Input Unit, type A14B-0061-B103-03, revision 03. This is the power input relay stage unit used in Fanuc System 3 and System 6 CNC control series, including Fanuc 6M and 6T machine tool controls. The I/P unit performs relay switching for the main power supply unit (PSU) on Fanuc System 6 and System 3 based ...more
Fanuc Four-Channel Analog Output Module (AAD04A) A03B-0819-C051
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A03B-0819-C051 is a four-channel analog output module (AAD04A) compatible with Series 30i, 31i, 32i, and 0i CNC platforms. Built to Fanuc in Japan (July 2013), this I/O component provides analog signal outputs for spindle override, feed rate adjustment, and auxiliary control functions. The unit s a standard ...more
Fanuc Power Supply Unit A16B-1212-0871/16C
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Fanuc A16B-1212-0871/16C Power Supply Unit, revision 16C, board designation A320-1212-T872/08, serial P86KK, production code P86P00738, made in Japan. This is the PSU BI (built-in input unit) power supply designed for use with Fanuc FS16A, 16B, 16C, 18A, 18B, 18C, and select 21 series CNC controls, as well as the ...more
Fanuc CNC Control Unit A02B-0319-B502 24V DC, 3.1A Max
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in CNC machining centers and milling applications, the Fanuc Series 0i-MD is a compact, LCD-mounted CNC control system designed for multi-axis machining environments. This unit carries type number A02B-0319-B502 and was manufactured by Fanuc Corporation in Oshino-mura, Yamanashi, Japan. The nameplate confirms a ...more
Fanuc Servo Amplifier Unit A06B-6089-H105 230V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This listing is for a Fanuc A06B-6089-H105 Servo Amplifier Unit, revision D, manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate identifies this as a single-axis servo drive with a rated main input of 200 to 230V AC at 17A at 200V, 3-phase, 50/60 Hz. Maximum output voltage is 230V AC. Rated output current for ...more
Fanuc Ltd Power Supply A16B-1212-0110-01
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Fanuc Ltd Power Unit part number A16B-1212-0110-01. The unit is manufactured in Japan by Fanuc Ltd as identified on the yellow OEM nameplate label affixed to the black enclosure. The unit is presented in its black sheet metal enclosure consistent with standard Fanuc power supply packaging., The A16B-1212 series power ...more
Fanuc Servo Amplifier Unit A06B-6066-H006 200/220/230V Allis-Chalmers
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This is a Fanuc A06B-6066-H006 C-Series AC servo amplifier unit, model designation SVUC 1-80, a single-axis digital servo drive from Fanuc Ltd, manufactured in Japan. The A06B-6066-H006 is part of the Fanuc C-Series servo amplifier family, designed to drive Fanuc AC servo motors in the model 5L through 30S range on ...more
Fanuc Machine Operator Panel A02B-0236-C235
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in FANUC CNC machining center control systems, the A02B-0236-C235 is a Machine Operator Panel i Horz Sub B1 from the A02B-0236 series, manufactured by FANUC LTD in Japan. This sub-panel assembly mounts within a horizontal machining center operator station and integrates multiple operator input components onto a ...more
Fanuc (Fujitsu Fanuc Ltd) Velocity Control Unit A06B-6047-H003 200V AC 3 Phase
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
A Velocity Control Unit from Fujitsu Fanuc Ltd, the A06B-6047-H003 is a DC servo amplifier drive belonging to the A06B-6047 series of single-axis velocity control units. The unit is labeled as a Velocity Control Unit on its nameplate, with type number A06B-6047-H003 and manufacturing number P21 0319, and was ...more
Fanuc Input Unit A14B-0076-B001
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in Fanuc 0 series CNC machine tool controls, the A14B-0076-B001 is the single-phase input power unit manufactured by Fanuc Ltd. in Japan. It serves as the relay stage between incoming AC line power and the main power supply unit in Fanuc 0A, 0B, 0-MA, 0-MB, 0-TA, and 0-TB control systems, as well as compatible ...more
Fanuc Master Motherboard PCB A02B-0083-B501 / A16B-1010-0150/05A
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Used in Fanuc Series 0 CNC machining centers, this master motherboard is identified on the nameplate as Type A02B-0083-B501 and on the PCB silkscreen as A16B-1010-0150/05A. It is associated with the Fanuc 0M Model A control system and carries the PMC-L (Programmable Machine Controller) designation visible on the ...more
Fanuc Discharge Resistor Unit A06B-6089-H500 282 to 325V DC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This is a Fanuc A06B-6089-H500 discharge resistor unit, a separate regenerative discharge resistor designed for use with Fanuc alpha series servo drive units including the SVU and SVUC series. The unit is rated for a DC bus input voltage of 282 to 325V and a rated power of 400W. The nameplate configuration diagram ...more
Fanuc Power Supply A16B-1212-0871/12C
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Fanuc A16B-1212-0871/12C Power Supply Unit, board designation A320-1212-T872/07, made in Japan. This is the PSU BI (built-in input unit) power supply designed for use with Fanuc FS16A, 16B, 16C, 18A, 18B, 18C, and select 21 series CNC controls, as well as the Fanuc R-J2 robot controller series. Nameplate confirmed: AC ...more
Fanuc Velocity Control Unit A06B-6047-H003 m00616
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A06B-6047-H003 is a DC servo velocity control unit produced by Fanuc Ltd and made in Japan. It is a legacy Fanuc servo drive designed for axis velocity control in CNC lathes, turning centers, and machining centers Fanuc Series 3, 5, and 6 control systems. Compatible machines include Mori Seiki, Takisawa, and ...more
Fanuc Servo Drive A06B-6127-H105 480 VAC
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
Fanuc A06B-6127-H105 Series D Alpha iSV 80HV Servo Amplifier Module. Model designation aiSV 80HV, part of the Fanuc Alpha i series high-voltage servo drive family. Rated input 565-679VDC at 5.8kW. Maximum output voltage 480VAC. Rated output current L axis 18.2A. M axis and N axis output current values not visible on ...more
Fanuc Servo Drive A06B-6089-H104
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A06B-6089-H104 is an Alpha series SVU1-40 AC servo amplifier unit manufactured by Fanuc Ltd in Yamanashi, Japan. The nameplate designates this unit as series B. It belongs to the A06B-6089 Alpha SVU series of single-axis servo amplifiers with a built-in power supply section, designed for use with Fanuc ...more
Fanuc Ltd I/O Module A03B-0819-C001
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
This listing is for a Fanuc Ltd ABU10A I/O module bearing type number A03B-0819-C001, serial number N11950, dated November 2002. The unit is manufactured in Japan by Fanuc Ltd and carries UL, CE, and EMC certifications as marked on the nameplate label., The ABU10A designation identifies this module as a base unit ...more
Fanuc Power Unit A16B-1211-0850-01 AC 200/220V Input
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fanuc
The Fanuc A16B-1211-0850-01 is a CNC control power supply unit manufactured by Fanuc Ltd in Japan. Identified by type number A16B-1211-0850-01 with manufacturing number P96P00305, this unit belongs to the A16B-1211 product line and is associated with the Fanuc Series 0-MA and 0-TA control platforms commonly installed ...more
Fanuc a20b-1007-0910/02a connector circuit boardstock k-3361
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Fanuc
FANUC A20B-1007-0910/02A CONNECTOR CIRCUIT BOARDSTOCK K-3361.
JUST ADDED!
Fargo Electric Drive Isolation Transformer DC11XN1/FE
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Fargo Electric
Used in CNC machining centers and industrial automation systems where European-standard drive voltage is required, the Fargo Electric DC11XN1/FE is an 11 KVA three-phase drive isolation transformer configured with a multi-tap primary accepting 208V, 240V, or 480V Delta input and a 400Y/231V secondary output. This ...more
Omni Vision LP1218E68 12-inch Monochrome CRT Display Monitor
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Farrand Controls
This listing is for an Omni Vision LP1218E68 12-inch monochrome CRT display monitor, specifically configured for use with the Giddings and Lewis CNC 8000-B control system. The unit is an open frame chassis design housing an integrated CRT assembly with a deflection yoke, flyback transformer, and a populated control ...more
FASCO D475 Motor 1/15 HP 1550 rpm 460V NEW WITH BOX STOCK B-1564
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Fasco
Model: D475
Fasco u63b1/ 7163-5779 120 volt 60hz - stock 3727cc
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Fasco
FASCO U63B1/ 7163-5779 120 VOLT 60HZ - STOCK 3727CC.
SFFC Vision Systems SFCC-AX-X01-05 Cable Style Female to Male Jack STOCK L-192-C
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Fc Vision Systems
Model: SFCC-AX-X01-05
SFFC Vision Systems SFCC-AX-X01-05 Cable Style Female to Male Jack STOCK L-192-C.
FCI #019376-01-06, 0193760106 Industrial Flow Switch
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: 019376-01-06
This listing is for a used Fluid Components International (FCI) flow switch, part number 0193760106. FCI flow switches are designed for industrial flow detection and process monitoring, commonly used to indicate the presence or absence of flow in gas or liquid systems. This unit s a probestyle sensing element with a ...more
Fci fluid components international flt93a-0b1a103c1b00000 new stock 025-a
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Fci
Model: FLT93A-0B1A103C1B00000
FCI FLUID COMPONENTS INTERNATIONAL FLT93A-0B1A103C1B00000 NEW STOCK 025-A.
Fci oem-019469-04-02 flow switch valve new
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: OEM-019469-04-02
Year: 2015
This listing is for a NEW Fluid Components International (FCI) OEM-019469-04-02. It provides inline process measurement within industrial piping systems, combining a flanged flow probe with an integrated transmitter housing. This unit delivers DC-powered operation, high-pressure capability, and sealed industrial ...more
FCI OEM-019469-04-02 Flow Switch USED
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: OEM-019469-04-02
Year: 2008
This listing is for a USED Fluid Components International (FCI) OEM-019469-04-02. It provides inline process measurement within industrial piping systems, combining a flanged flow probe with an integrated transmitter housing. This unit supports DC-powered operation, high-pressure process conditions, and enclosed ...more
Fci oem-019469-04-03 flow switch used
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: OEM-019469-04-03
FCI OEM-019469-04-03 flow switch available. In used condition and ideal for monitoring flow rates in various applications. Take advantage of this reliable equipment from a respected manufacturer., Spec Sheet, FCI OEM-019469-04-03, Dimensions. 7X7X2, Weight. 7LBS.
Fci oem-019868-04-02 flow switch stainless sensor used
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: OEM-019868-04-02
This listing is for a USED FCI OEM Flow Switch (OEM0198680402). Designed for integration into fluid monitoring systems, this rugged stainless steel switch is ideal for detecting flow in liquids, gases, or slurries., Manufacturer: Fluid Components International (FCI), Model/Part: OEM0198680402, Type: Flow or ...more
FCI ST75V-1F1JF2GCT01 Mass Flow Meter NEW
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Fci
Model: ST75V
FCI ST75V Flow Monitor for sale, new condition. Perfect for accurate flow measurement needs in various industrial settings. Reliable performance and high quality from a reputable manufacturer. Don't miss out on this essential equipment., Spec Sheet, FCI ST75V, Dimensions. 18X11X6, Weight. 18LBS.
Federal 00000982240 module communication stock #k-2304
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Federal
Model: 00000982240
FEDERAL 00000982240 MODULE COMMUNICATION STOCK #K-2304.
New federal signal k149122b strobe tube stock h846
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Federal
Model: K149122B
JUST ADDED!
Federal Signal #L-240, universal siren
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Federal
Model: L-240
The Federal Signal L-240 is an electro-mechanical alarm siren rated for 240VAC/DC operation, part of the long-running Model L series first introduced in 1946. It operates on a universal motor driving a ported aluminum rotor within a specially designed stator to produce a distinctive low-pitch tone suited to ...more
Federal signal lp3m-120a / lp3m120a (new no box) stock h88a
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Federal
Model: LP3M-120A
FEDERAL SIGNAL LP3M-120A / LP3M120A (NEW NO BOX) STOCK H88A.
Federal Signal #LSL-024A, Litestak Stack Light Module 24VDC Amber, NEW
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Federal
Model: LSL-024A
This listing is for a NEW FEDERAL SIGNAL LSL-024A., Litestak stack light module with amber lens for visual status indication in industrial environments. Designed for 24VDC operation with steady-burn mode., See photos for., Part No: LSL-024A, Type: Stack Light Module, Condition: NEW, Voltage: 24 VDC, Current: 0.76 A ...more
Federal Signal #LSL-024B, Litestak 24VDC, NEW
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Federal
Model: LSL-024B
This listing is for a NEW FEDERAL SIGNAL LSL-024B., Litestak for visual status indication in industrial environments. Designed for 24VDC operation with steady or flashing modes (flasher sold separately)., See photos for., Part No: LSL-024B, Type: Stack Light Module, Condition: NEW, Voltage: 24 VDC, Current: 0.76 A ...more
Federal Signal #LSL-024C, Litestak Stack Light Module 24VDC Clear, NEW
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Federal
Model: LSL-024C
This listing is for a NEW FEDERAL SIGNAL CORP. LSL-024C., Litestak stack light module with clear lens for visual status indication in industrial environments. Designed for 24VDC operation with steady or flashing modes (flasher sold separately)., See photos for., Part No: LSL-024C, Type: Stack Light Module, Condition: ...more
Federal Signal #LSL-024G, Litestak Stack Light Module 24VDC Green, NEW
iGAM | Detroit, MI
Category: Electrical MRO Components & Parts
Seller: iGAM
Location: Detroit, MI
Mfr: Federal
Model: LSL-024G
This listing is for a NEW FEDERAL SIGNAL LSL-024G., Litestak stack light module with green lens for visual status indication in industrial environments. Designed for 24VDC operation with steady or flashing modes (flasher sold separately)., See photos for., Part No: LSL-024G, Type: Stack Light Module, Condition: NEW ...more
JUST ADDED!
Federal Signal #UTM, universal tone module
MRO Exchange | Fairfield, IL
Category: Electrical MRO Components & Parts
Seller: MRO Exchange
Location: Fairfield, IL
Mfr: Federal
Model: UTM
The Federal Signal Corporation Model UTM is a Universal Tone Module from the SelecTone product line, Series D, manufactured in the USA. Based on a microcontroller tone generator, the UTM is capable of producing 32 selectable tones, with tone selection set via five DIP switches on the board. The module serves as the ...more
New federal signal wb weatherproof stock h412a
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Federal
NEW FEDERAL SIGNAL WB WEATHERPROOF STOCK H412A.
Federal Pioneer Federal Pacific #DSP-FM Mark 2 C-4-411-2 Alarm Feeder Ground Current
Boundary Electric Ltd | Grand Forks, BC
Category: Electrical MRO Components & Parts
Seller: Boundary Electric Ltd
Location: Grand Forks, BC
Mfr: Federal Pacific
Model: DSP-FM
Federal Pacific, substation transformer radiator banks, OLTC-AUTO, 4 with Fans
Crimson Ventures & Consulting Llc | Plainview, TX
Category: Electrical MRO Components & Parts
Seller: Crimson Ventures & Consulting Llc
Location: Lubbock, TX
Mfr: Federal Pacific
Model: OEM RADIATOR BANKS OLTC-AUTO 60/80/100 MVA AUTO-TR
"Complete set of 11 original OEM radiator banks removed from a Federal Pacific Electric (FPE) OLTC-AUTO 60/80/100 MVA 3-phase auto-transformer (serial 70168-1, built for City of Lubbock Holly Plant). • 8 plain steel finned banks • 3 banks with factory ONAF cooling fans, motors & guards (all spin freely ...more
Federal Pacific T48LH42-45 Dry Type Transformer 45 kVa 480V to 480Y/277V #HP-107
GEI Surplus | Chalfont, PA
Category: Electrical MRO Components & Parts
Seller: GEI Surplus
Location: Montgomeryville, PA
Mfr: Federal Pacific
Model: T48LH2D-45
Federal Pacific T48LH42-45 Dry Type Transformer 45 kVa 480V to 480Y/277V #HP-107.
