SNX #nVision-System-C-1.5, Semi-Automatic Contour Edgebander, 94" x 94" Work capacity, 104.5 kg max Material weight, 0.4"-2.36" thickness, 2026

SNX - nVISION C 1.5: Contour Edgebander -- Specifications The "nVision C1.5" Curved (Contour) Edgebander allows: 360 Edgebanding to contoured (shaped) panels. Standard banding machine includes banding &trimming stations with: (1) Set of cutting tools; (1) articulated vacuum arm; edgeband coil stand; (1) 8″ aluminum vacuum pod. - Includes: On-site installation & training; free phone support; operation manual; 1-year limited warranty.The machine uses: Standard EVA hot melt glue; can apply 0.5 mm - 3 mm thick edgebanding.Edgebanding is applied automatically: Part is advanced past the edgebanding workstations via turntable.Reduced learning curve/expertise for operation: Operator simply loads part to vacuum turntable, then activates the edgebanding cycle. -- Working Capacity"nVision C 1.5": Bands minimum material size: 150 mm (6") Diameter.Max. material size: 2,400 x 2,400 mm (94" x 94"); max. material weight: up to 104.5 kG (230 Lbs).Material thickness from: 10 - 60 mm (0.4" - 2.36"); Banding thickness from: 0.5 mm thin tape w/low temp. adhesive: 3 mm Tape. -- Radii CapacityMin. internal (inside) radius: 11.1 mm (0.4375 - 7/16"); Mini. external (outside) radius: 30 mm (1.18") Based on 1 mm thick edge tape. IMPORTANT: ALL min. & max. radii are affected by tape thickness, quality of adhesive, and edgebanding being applied. Radius size dramatically affected by adhesive temperature and quality of edge tape: Semi or rigid.NOTE: Panels can be irregular in shape but must conform to the min. tolerances of inner & outer radii and fit within the work area.Equipped with:Thermal regulated glue pot heated via (1) 800-Watt heating elements with: Electronic temperature controls; holds up to 1 kG (2.2 Lbs) of granules. (2) Pressure rollers to copy the shape of the piece; automatic guillotine for coiled material 0.5 mm - 3 mm (0.02" - 0.11") thickness & 57 mm height (2-1/4"). Operator Interface -- Faster processor and a more accurate encoder for more consistent tight butt joints; 15"; touchscreen monitor; training & maintenance videos on PC; connect to the Internet for service & updates; more user-friendly interface. - Bar code capable (optional).15"; Touchscreen monitor provides: Intuitive control panel, while features like training & maintenance videos make it easier than ever to maintain and operate the machine.Optional bar code capability allows: Seamless integration into modern production workflows, reducing the potential for operator errors.Features -- Tape height guide; aluminum infeed guides; solid shoe holder; adjustable pod height spindle; digital readouts; pneumatic enclosure; laser upgrade.New PLC interface enhances: Usability, while the machine is capable of edgebanding & trimming an inside radius as small as 7/16″. It features: 18,000 RPM - ER20 collet-type spindles (top/bottom), and the same proven articulating vacuum support arm."nVision C1.5" can: Band & trim open-ended parts up to 8’ in length; apply edgebanding from 0.5

Request More Information from Seller