Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: April 7, 2026 at 10:03 AM
Industry: Generators & Engines
Price: 19500
Description: 2005 725KW PRIME POWER 2005 Caterpillar 3412 Diesel Generator, Runs but has coolant in oil.
CONDITION: Generator Runs & Makes Power, Needs Repair-Coolant discovered in oil. … [Read more...]
CONDITION: Generator Runs & Makes Power, Needs Repair-Coolant discovered in oil. … [Read more...]
SOLD AS-IS, No RETURNS
CAT Product Identification Number: CAT 00000TTFT00507
Generator Set Serial: AFR01313
Engine # BLG02939
EngineAR# 186-4811
Engine HP 1186@ 1800RPM
Rating: PRIME POWER
Original Run Hours: 30,905
Date of Mfg: 2005
Size: 725 KW, PRIME POWER 3 Phase
Voltage: 480V 3 Phase (Can be Changed)
CAT Product Identification Number: CAT 00000TTFT00507
Generator Set Serial: AFR01313
Engine # BLG02939
EngineAR# 186-4811
Engine HP 1186@ 1800RPM
Rating: PRIME POWER
Original Run Hours: 30,905
Date of Mfg: 2005
Size: 725 KW, PRIME POWER 3 Phase
Voltage: 480V 3 Phase (Can be Changed)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:59 AM
Industry: General Machinery & Equipment
Description: 10' X 3/8" SHEAR
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:58 AM
Industry: General Machinery & Equipment
Description: 12' x 230 TON PRESS BRAKE. BACKGAUGE A PLUS BUT NOT A REQUIREMENT
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:20 AM
Industry: General Machinery & Equipment
Description: Amada HDS2204NTW CNC Hydraulic Press Brake (2012)
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System, Will Bend 1" Material
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System, Will Bend 1" Material
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:14 AM
Industry: General Machinery & Equipment
Description: Takang TKV-860HT Twin Spindle CNC Vertical Boring Mill, 39.37" Cutting Dia., 10-1500 RPM, Fanuc OI-TF CNC Control, 2- 31.5" 3-Jaw Chucks, 2-Rear Discharge Chip Conveyors,
New 2016, Very Low Hours
New 2016, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:13 AM
Industry: General Machinery & Equipment
Price: $91,500
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 9:11 AM
Industry: General Machinery & Equipment
Price: $55,000
Description: MUST SELL, OWNER NEEDS FLOOR SPACE, WAS $95k, NOW ONLY $55k
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 8:59 AM
Industry: Transformers
Description: 51 KVA, 3 Phase, 60 cycle, 4160 volt delta primary, 240 volt Wye secondary (208 volts acceptable) w/taps, indoor, cooling class AA, dry type transformer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 7, 2026 at 8:39 AM
Industry: Processing Equipment
Price: 5500
Description: High quality 90 Gallons Stainless Steel Steam Jacketed Kettle Made in Italy. 3 available!
This kettle is designed specifically for steam cooking and is ideal for commercial use, such as dairy operations and food service establishments. Its large capacity allows for efficient workflow and they are all in amazing condition. … [Read more...]
This kettle is designed specifically for steam cooking and is ideal for commercial use, such as dairy operations and food service establishments. Its large capacity allows for efficient workflow and they are all in amazing condition. … [Read more...]
Do not hesitate to ask if you have any questions.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 11:03 PM
Industry: General Machinery & Equipment
Description: Hello I have 9 Rexnord Venus and 1 Atlas Planetary Gearboxes
All are totally rebuilt with a 1 Year warranty … [Read more...]
All are totally rebuilt with a 1 Year warranty … [Read more...]
FREE SHIPPING US ONLY
Please call or email me For a Quote
Thank you
Please call or email me For a Quote
Thank you
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 10:59 PM
Industry: General Machinery & Equipment
Description: Hello I’m Looking To Buy All types of carbide material
Such as Inserts end mills any type of tooling I will buy … [Read more...]
Such as Inserts end mills any type of tooling I will buy … [Read more...]
Or other style
New used or broken Carbide inserts wanted
We pay Top dollar If you are local I will pay cash if not i can Wire or Ach however you’d like
Please let me know what you Have
My cel if below
Thanks
New used or broken Carbide inserts wanted
We pay Top dollar If you are local I will pay cash if not i can Wire or Ach however you’d like
Please let me know what you Have
My cel if below
Thanks
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:33 PM
Industry: General Machinery & Equipment
Description: LeBlond #1 tool & cutter grinder..
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 6:57 PM
Industry: Motors - A.C. & D.C.
Budget: Up to $5,000
Description: Disregard my budget not paying $5000 for a motor . This purchase will replace a bad band saw motor,so a rebuilt motor is in my budget.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 5:08 PM
Industry: General Machinery & Equipment
Price: Multiple Prices
Description: We have 4 saws for sale.
52” diameter blade masonry saw (new still in boxes) asking for $35,000.00 … [Read more...]
52” diameter blade masonry saw (new still in boxes) asking for $35,000.00 … [Read more...]
20” diameter blade masonry saw (used) asking for $4,000.00
40” diameter blade masonry saw (used) asking for $6,000.00
6’ diameter blade masonry saw (used). asking for $7,500.00 (you come and remove it)
40” diameter blade masonry saw (used) asking for $6,000.00
6’ diameter blade masonry saw (used). asking for $7,500.00 (you come and remove it)
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 4:26 PM
Industry: Generators & Engines
Description: Looking to buy up to 3x CAT XQ1475Gs , all hours will be considered.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 4:18 PM
Industry: General Machinery & Equipment
Description: 190 Ton Accurpress Model 519012 Accell 190-12 CNC Press Brake (2011)
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability,
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 3:24 PM
Industry: General Machinery & Equipment
Description: Hydraulic Horizontal Surface Grinder 72" + Table Feed.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 3:02 PM
Industry: Other Electrical & Power Equipment
Description: Looking for 225kva 600V in/600V out UPS, preferably either Vertiv or Eaton one of our customers in Canada. Please reach out to me and send a quote.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 2:28 PM
Industry: General Machinery & Equipment
Price: $8,000
Description: Complete laser welding work station. Is fully operational and can be tested.water chiller and air compressor included.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 2:21 PM
Industry: Generators & Engines
Description: $65,000.00-1990 - 3516 1600kW Standby -1250kW Continous Duty. 480 Volt 60 HZ, enclosed or Open skidded- Quinn CAT Oil Sample from Quinn CAT. Perfecto!!!
2020- 900/ 1150 CFM - 500 PSI -SulliAir Compressor-1200 hours since New - Tier 4 Final -$165,000.00
2020- 900/ 1150 CFM - 500 PSI -SulliAir Compressor-1200 hours since New - Tier 4 Final -$165,000.00
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 2:16 PM
Industry: Transformers
Budget: Up to $5,000
Description: I am looking for a 30-45KVA 3-phase 240v Delta to 400v Wye Isolation Transformer for a Kuka milling cell.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 12:59 PM
Industry: General Machinery & Equipment
Price: 12,000.00
Description: Voltage/Amperage: 480v/3-phase, 20a. Breaker size: 3-pole 20a.
-Pneumatics: The lines are clean as a whistle. We run our air into a two-stage (1µ and .5µ) filtration manifold that includes a dryer in-between; the 1µ is the prefilter before the dryer, the .5µ is the post-filter to catch anything else. I've NEVER seen any condensate in any of our pneumatics-the system in place is very aggressive in terms of catching contaminants. Comes with CUSTOM dc manifold and additional NEW gluepot!
-Pneumatics: The lines are clean as a whistle. We run our air into a two-stage (1µ and .5µ) filtration manifold that includes a dryer in-between; the 1µ is the prefilter before the dryer, the .5µ is the post-filter to catch anything else. I've NEVER seen any condensate in any of our pneumatics-the system in place is very aggressive in terms of catching contaminants. Comes with CUSTOM dc manifold and additional NEW gluepot!
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 12:25 PM
Industry: General Machinery & Equipment
Description: Late Model Niigata HN 50 or HN 63, HN models only.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 12:21 PM
Industry: Generators & Engines
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 12:01 PM
Industry: General Machinery & Equipment
Description: Fanta Napco Udylite Phosphating Line & Pipe Peeler
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 11:21 AM
Industry: Generators & Engines
Price: 50000 OBO
Voltage: 208 V 3 Phase (12 Lead Gen End)
Hours: Under 600 Since New
Engine Model: 3412
Engine AR# 7E-0160
Engine Perf Spec: 0K-0526
Engine Serial#: 81Z24037
Engine Displacement: 27.0 L
HP: 752 @ 1800 RPM
Hours: Under 600 Since New
Engine Model: 3412
Engine AR# 7E-0160
Engine Perf Spec: 0K-0526
Engine Serial#: 81Z24037
Engine Displacement: 27.0 L
HP: 752 @ 1800 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 11:20 AM
Industry: Processing Equipment
Price: 1800
For all information, please call or email.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 10:44 AM
Industry: Transformers
Description: I need it to be 30kva 240v (3phase +ground) to 380v (3phase + neutral)
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 10:19 AM
Industry: General Machinery & Equipment
Description: 1.25" KEYSEATER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 10:01 AM
Industry: General Machinery & Equipment
Description: Top load hot air dryer. Something 30” x 25” x 30” Internal dimensions minimum
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 9:58 AM
Industry: Transformers
Description: Looking for a long shot here, a indoor rated SADTEM model SW65-2, 27.6KV, 300:5 ratio, CT, 150 KV BIL, revenue class accuacy or anything close to the set up. I can send a drawing of the existing set up with a picture.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 9:56 AM
Industry: General Machinery & Equipment
Description: Mazak Quick Turn 250, 2000 & up in good shape, would be nice if its in the Midwest buyer is looking to spend around 20K plus???
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 9:37 AM
Industry: General Machinery & Equipment
Description: 4 Used Mechanical Straight Side Double Crank Presses Available Tons from 250 to 400. 1 Clearing 250-ton Model SD2-250-84T, 1 Minster 250-ton Model SD2-250-60-48, 1 Minster 300-ton Model E2-300-72-36, 1 Verson 400-ton Model S2-400-84-42. All machines can be seen under power at same location.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 9:33 AM
Industry: Circuit Breakers
Description: 1EA QCL2030 WESTINGHOUSE 2P 30AMP OLD STYLE - ROUNDED TOP CORNERS LINE AND LOAD SIDE
7EA THQB1120GFI GE 1P 20AMP WITH GROUND FAULT
7EA THQB1120GFI GE 1P 20AMP WITH GROUND FAULT
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:46 AM
Industry: General Machinery & Equipment
Description: WANTED Fenn 5FSA, Torrington 323 SS, or Torrington 434 SS (Stationary Spindle models only).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:37 AM
Industry: Circuit Breakers
Description: Qty 1 Old ITE LM breaker ET8504 with 200 amp trip unit and Qty 2 ITE LM breakers with 400 amp trip
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:28 AM
Industry: Motors - A.C. & D.C.
Description: Looking for a Reliance 750 hp, 300/900 rpm, B966AT frame, 500 volt armature, 300 volt field, Looking for this in E-OK condition. We will rebuild at our shop. For more information contact Bob at the phone numbers listed.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 7:45 AM
Industry: Generators & Engines
Description: Looking for a C12 marine engine. This is an Aux engine running hydraulics in a dredge to replace serial number NFL 455 HP @ 2100 rpm, keel cooled engine. Can be either, new, rebuilt or good low hour used
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 7:29 AM
Industry: General Machinery & Equipment
Price: $500
Description: Ball transfer tables are used at transfer points where you need multidirectional movement. Think load positioning, reorientation, or manual sorting. They’re especially useful at workstations, conveyor junctions, or in areas where products need to be rotated or pushed in different directions without lifting.
Product Dimensions: 48″ D X 58″ W … [Read more...]
Product Dimensions: 48″ D X 58″ W … [Read more...]
Brand: Hytrol
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 5, 2026 at 4:35 PM
Industry: Transformers
Price: 825,000
Description: Here is a condensed version that
Available Immediately: ABB 100/112 MVA 3-Phase Autotransformer. … [Read more...]
Available Immediately: ABB 100/112 MVA 3-Phase Autotransformer. … [Read more...]
• 230kV Primary
• 115kV or 69kV Reconnectable Secondary
• Copper windings, Secondary LTC, & Primary DETC
Excellent condition. April 2023 oil analysis shows a clean main tank (<1 ppm Acetylene). Stored outdoors and ready to ship immediately to help you bypass long factory lead times. Sold as-is, where is. TURN KEY OPTION AVAILABLE
• 115kV or 69kV Reconnectable Secondary
• Copper windings, Secondary LTC, & Primary DETC
Excellent condition. April 2023 oil analysis shows a clean main tank (<1 ppm Acetylene). Stored outdoors and ready to ship immediately to help you bypass long factory lead times. Sold as-is, where is. TURN KEY OPTION AVAILABLE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 5, 2026 at 12:55 PM
Industry: Motors - A.C. & D.C.
Description: This is a replacement motor for a bandsaw. I’m looking for 110volt,3/4 HP,1750RPM,56W frame, existing motor is 103/4” long and 6” wide at the mounting frame.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 4, 2026 at 11:28 AM
Industry: General Machinery & Equipment
Max Turning Length: 11" (280 mm)
X-Axis Rapid Traverse: 787 ipm
Z Axis Rapid Traverse: 945 ipm
X-Axis Travel Distance: 6"
Z-Axis Travel Distance: 13"
Max Spindle Speed: 6000 RPM
Max Spindle Power: 20 hp
Max Spindle Torque: 70 ft-lb
Turret # of stations: 10
Daewoo Fanuc i Series Control
Length: 78"
Height: 65"
Width: 63"
Weight: 6989 lb
X-Axis Rapid Traverse: 787 ipm
Z Axis Rapid Traverse: 945 ipm
X-Axis Travel Distance: 6"
Z-Axis Travel Distance: 13"
Max Spindle Speed: 6000 RPM
Max Spindle Power: 20 hp
Max Spindle Torque: 70 ft-lb
Turret # of stations: 10
Daewoo Fanuc i Series Control
Length: 78"
Height: 65"
Width: 63"
Weight: 6989 lb
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
