Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: April 21, 2026 at 9:54 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:49 AM
Industry: General Machinery & Equipment
Description: Wanted: Hydraulic Plate roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: Hitachi Seiki CNC lathe - Worked before being unhooked from power
Model HT20SII - Hitecturn20SII … [Read more...]
Model HT20SII - Hitecturn20SII … [Read more...]
12 Tool, 8” Chuck, 15” Swing, 5000 RPM
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:24 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: OD Cylindrical Grinding Center - worked before being unhooked from power
Manufacturer – Norton … [Read more...]
Manufacturer – Norton … [Read more...]
Model # - CTU 14”
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:11 AM
Industry: General Machinery & Equipment
Description: ALMCO V-14120 Thru-Feed Vibratory Finishing System, 13.8 Cu. Ft. Tub Capacity, 120" L x 14" W x 15-1/2" D Tub, 10-HP Main Motor, (2) Conveyors, New 2022; used approximately 800 hours for a specific job
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:47 AM
Industry: General Machinery & Equipment
Price: 1850$
Description: For sale is a professional-grade Air Cycle Bulb Eater® 3 fluorescent lamp crushing system. This unit was recently acquired as facility surplus and is in full operational condition.
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
New retails for over $5,000. Great opportunity for a warehouse, school or hospital
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:29 AM
Industry: Generators & Engines
Description: We are looking for Gas Turbine parts of GE, Siemens, Alstom, Solar, we are buying/selling the Gas Turbine parts.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:41 PM
Industry: General Machinery & Equipment
Price: $5000
Description: WAZER Pro Water Jet Cutting Machine
Machine has less than 13 total hours of run time … [Read more...]
Machine has less than 13 total hours of run time … [Read more...]
The machine is currently experiencing an issue with locating the home position.Until the home position is correctly found, the machine will not proceed with cutting operations.
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:13 PM
Industry: Other Electrical & Power Equipment
Price: 20000
Description: 3 available come with control box that operates all 3 boilers price for each
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:07 PM
Industry: General Machinery & Equipment
Description: Need 5 oz glass bottles as many as possible
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 3:34 PM
Industry: General Machinery & Equipment
Description: Hydraulic Plate Roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:57 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: 2003 Haas VF-7 CNC Mill with 30 station tool changer, optional hard wire programming, chip auger. Does need the head stock rebuilt.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:37 PM
Industry: Generators & Engines
Description: Kraft have for sale
2 - 1200 KW, 1200 rpm, 60 Hz, 480 vac, On Stock - prior sale … [Read more...]
2 - 1200 KW, 1200 rpm, 60 Hz, 480 vac, On Stock - prior sale … [Read more...]
Call / emial for further information
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:35 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: New, never used Trueline 250N Striper, runs on nitrogen. Comes with 5 gal stainless steel paint tank and 4" box sprayer. Easy to transport. Cost $2095 new.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:11 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:10 PM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:09 PM
Industry: General Machinery & Equipment
Price: $55,000
Description: MUST SELL, OWNER NEEDS FLOOR SPACE, WAS $95k, NOW ONLY $55k
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:57 PM
Industry: Circuit Breakers
Budget: $10,001 - 50,000
Description: 1 used AKF 2E draw out circuit breaker
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:47 PM
Industry: Transformers
Description: WANT TO BUY DRY TYPE TRANSFORMER 1500KVA 600V PRIM. 480V 3PH SEC.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:44 PM
Industry: General Machinery & Equipment
Price: 545000
Description: 2018 Amera-Seiki Model VT-2000RM Vertical Turning Lathe w/Live Tooling, Fanuc Oi-TF, 78.7 Chuck, 82" Swing under power for another month.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:00 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 12:41 PM
Industry: General Machinery & Equipment
Description: 400 to 500 Ton Mechanical Brake, Cincinnati Preferred, 12' Between Housings
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 12:38 PM
Industry: General Machinery & Equipment
Description: Tonnage Capacity: 90 Tons (81.6 Metric Tons)
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Distance Between Housings: 6' 6" (78.5") (1,994 mm)
Maximum Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Equipped With
Cincinnati PC-Based CNC Control
CNC Backgauge
Secondary Digital Display
Foot C
Maximum Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Equipped With
Cincinnati PC-Based CNC Control
CNC Backgauge
Secondary Digital Display
Foot C
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:44 AM
Industry: Motors - A.C. & D.C.
Description: 400HP, 1150/1500 RPM, MCD5453 FRAME, 500V ARM
STABILIZED SHUNT, DPFG-BV
STABILIZED SHUNT, DPFG-BV
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:35 AM
Industry: Motors - A.C. & D.C.
Description: Hello,
Can you let me know if you have the following motor in your stock? … [Read more...]
Can you let me know if you have the following motor in your stock? … [Read more...]
Thanks,
Ricky
Ricky
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:09 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:29 AM
Industry: General Machinery & Equipment
Description: Late-model VMC with 50-taper/50-HP spindle and capacity to machine a work-piece measuring 95" X 44" X 30"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:10 AM
Industry: General Machinery & Equipment
Description: Model 51 New Britain 1" 6 spindle with spindle stopping
Tornos Deco 10mm 9 axis machine swiss CNC lathe
Tornos Deco 10mm 9 axis machine swiss CNC lathe
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:02 AM
Industry: General Machinery & Equipment
Description: I need a 30" - 60" Tape Wrapper, Looking at Engineering Technology Corp Model #TW30 or #TW-60 Tape Wrapper, or an equal made & model, and any year
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 8:57 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 7:43 AM
Industry: General Machinery & Equipment
NEW 2012 Delivered 2013
Only 7000 Hours
Specifications:
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″ Bar Capacity: 6.5″ X Axis Travel: 14.2″ Z Axis Travel: 84.8″ Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Under Power in Houston
Only 7000 Hours
Specifications:
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″ Bar Capacity: 6.5″ X Axis Travel: 14.2″ Z Axis Travel: 84.8″ Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Under Power in Houston
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
