Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: April 6, 2026 at 8:46 AM
Industry: General Machinery & Equipment
Description: WANTED Fenn 5FSA, Torrington 323 SS, or Torrington 434 SS (Stationary Spindle models only).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:37 AM
Industry: Circuit Breakers
Description: Qty 1 Old ITE LM breaker ET8504 with 200 amp trip unit and Qty 2 ITE LM breakers with 400 amp trip
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 8:28 AM
Industry: Motors - A.C. & D.C.
Description: Looking for a Reliance 750 hp, 300/900 rpm, B966AT frame, 500 volt armature, 300 volt field, Looking for this in E-OK condition. We will rebuild at our shop. For more information contact Bob at the phone numbers listed.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 7:45 AM
Industry: Generators & Engines
Description: Looking for a C12 marine engine. This is an Aux engine running hydraulics in a dredge to replace serial number NFL 455 HP @ 2100 rpm, keel cooled engine. Can be either, new, rebuilt or good low hour used
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 6, 2026 at 7:29 AM
Industry: General Machinery & Equipment
Price: $500
Description: Ball transfer tables are used at transfer points where you need multidirectional movement. Think load positioning, reorientation, or manual sorting. They’re especially useful at workstations, conveyor junctions, or in areas where products need to be rotated or pushed in different directions without lifting.
Product Dimensions: 48″ D X 58″ W … [Read more...]
Product Dimensions: 48″ D X 58″ W … [Read more...]
Brand: Hytrol
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 5, 2026 at 4:35 PM
Industry: Transformers
Price: 825,000
Description: Here is a condensed version that
Available Immediately: ABB 100/112 MVA 3-Phase Autotransformer. … [Read more...]
Available Immediately: ABB 100/112 MVA 3-Phase Autotransformer. … [Read more...]
• 230kV Primary
• 115kV or 69kV Reconnectable Secondary
• Copper windings, Secondary LTC, & Primary DETC
Excellent condition. April 2023 oil analysis shows a clean main tank (<1 ppm Acetylene). Stored outdoors and ready to ship immediately to help you bypass long factory lead times. Sold as-is, where is. TURN KEY OPTION AVAILABLE
• 115kV or 69kV Reconnectable Secondary
• Copper windings, Secondary LTC, & Primary DETC
Excellent condition. April 2023 oil analysis shows a clean main tank (<1 ppm Acetylene). Stored outdoors and ready to ship immediately to help you bypass long factory lead times. Sold as-is, where is. TURN KEY OPTION AVAILABLE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 5, 2026 at 12:55 PM
Industry: Motors - A.C. & D.C.
Description: This is a replacement motor for a bandsaw. I’m looking for 110volt,3/4 HP,1750RPM,56W frame, existing motor is 103/4” long and 6” wide at the mounting frame.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 4, 2026 at 11:28 AM
Industry: General Machinery & Equipment
Max Turning Length: 11" (280 mm)
X-Axis Rapid Traverse: 787 ipm
Z Axis Rapid Traverse: 945 ipm
X-Axis Travel Distance: 6"
Z-Axis Travel Distance: 13"
Max Spindle Speed: 6000 RPM
Max Spindle Power: 20 hp
Max Spindle Torque: 70 ft-lb
Turret # of stations: 10
Daewoo Fanuc i Series Control
Length: 78"
Height: 65"
Width: 63"
Weight: 6989 lb
X-Axis Rapid Traverse: 787 ipm
Z Axis Rapid Traverse: 945 ipm
X-Axis Travel Distance: 6"
Z-Axis Travel Distance: 13"
Max Spindle Speed: 6000 RPM
Max Spindle Power: 20 hp
Max Spindle Torque: 70 ft-lb
Turret # of stations: 10
Daewoo Fanuc i Series Control
Length: 78"
Height: 65"
Width: 63"
Weight: 6989 lb
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 4:28 PM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 3:20 PM
Industry: General Machinery & Equipment
Description: Daewoo Puma 200 C CNC Turning Center, Fanuc 18T, 5C Collet, Max Swing Over Bed / Carriage 20.08" / 12.99", Max Turning Diameter / Std. 13.78" / 8.27", 20.8" Between Centers, 4,500 RPM, 2024 Actuator was rebuilt
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 2:16 PM
Industry: Generators & Engines
Izusu Engine
Load Bank Tested
3200 On package. When under warranty, the replaced engine is NEW. The new engine has 1800 hours.
Trailer, New Tires, New brake lines, New packed bearing.
Title to Trailer
Load Bank Tested
3200 On package. When under warranty, the replaced engine is NEW. The new engine has 1800 hours.
Trailer, New Tires, New brake lines, New packed bearing.
Title to Trailer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 2:13 PM
Industry: General Machinery & Equipment
Description: Capable of straightening 11' to 12” Diameter Solid bar. Average length of bar stock is 10'. Max length is 31'
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 12:57 PM
Industry: Processing Equipment
Price: 18,000
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 12:48 PM
Industry: Circuit Breakers
Description: 4- 75A 3P breakers for above panels (or adjustable)
4- 100A 3P breakers for above panels (or adjustable) … [Read more...]
4- 100A 3P breakers for above panels (or adjustable) … [Read more...]
4- 300A 3P breakers for above panels (or adjustable)
4- 400A 3P breakers for above panels (or adjustable)
4-277V 1P 15A breaker for above panels
Panels
2 – 480 V panels with neutral buss 1000 Amp panels with the
• 1200 A main breaker (adjustable)
• Needs to hold minimally 8 3 phase breakers
4 – 480 V panels with neutral buss 500 Amp panels with the
4- 400A 3P breakers for above panels (or adjustable)
4-277V 1P 15A breaker for above panels
Panels
2 – 480 V panels with neutral buss 1000 Amp panels with the
• 1200 A main breaker (adjustable)
• Needs to hold minimally 8 3 phase breakers
4 – 480 V panels with neutral buss 500 Amp panels with the
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 12:46 PM
Industry: Transformers
Description: 2 Dry type transformers 1000 to 2000 kVA 4160 to 480
4 Dry type transformers 500 to 1000 kVA 4160 to 480 … [Read more...]
4 Dry type transformers 500 to 1000 kVA 4160 to 480 … [Read more...]
4- 277V to 120V 5 VKA transformers
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 12:34 PM
Industry: Generators & Engines
Model H24 GSID
Compression - 8.6 :1
1800 RPM
SOund enclosed
Control and switchgear room,
30 FT ISO Containers.
VGF
Chiller available- Mics stuff.
FOB Californina
Compression - 8.6 :1
1800 RPM
SOund enclosed
Control and switchgear room,
30 FT ISO Containers.
VGF
Chiller available- Mics stuff.
FOB Californina
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 10:25 AM
Industry: General Machinery & Equipment
Description: Mori Seiki NH6.00DCGII CNC Horizontal Machining Center, 2013, 41.3" x 35.4" x 38.6" Travels, (2) 24.8" x 24.8" Pallets, CAT50, 10,000 RPM, F31iA Control,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 10:14 AM
Industry: Motors - A.C. & D.C.
Description: 400 h.p., 1200 rpm, 2616-8 frame, TEFC enclosure, 2300 volt, ball bearing, Siemens Allis motor.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 9:42 AM
Industry: General Machinery & Equipment
Description: 1966 Cincinnati Hydrotel milling machine with 28" X 157" table, 144" of table travel
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 9:30 AM
Industry: Generators & Engines
Price: $34,500 OBO
Description: High-quality Kohler factory sound-attenuated walk-in enclosure removed from a 2 MW generator system. This is a complete enclosure package with integrated skid and fuel tank, ideal for repowering, retrofitting, or custom generator builds.
Unit is in excellent reusable condition and will be professionally removed. … [Read more...]
Unit is in excellent reusable condition and will be professionally removed. … [Read more...]
Previous Application: Housed 2 MW Diesel Generator
Can assist with loading and logistics
Central NJ Location
Can assist with loading and logistics
Central NJ Location
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 9:21 AM
Industry: Circuit Breakers
Description: Qty 1 A/C Interupter Switch Type LBS-SE 600 amps 13.89 KV 40KA B.I.L. 95KV
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 8:58 AM
Industry: General Machinery & Equipment
Description: Finn-Power 200-4100 TS 3 F CNC Press Brake (2007)
200 Ton, 4 axis, TS3 7-axis cnc control, (5) axis back gauge (X,R,Z1,Z2,X1), Windows Based Controls, Hydraulic Clamping
200 Ton, 4 axis, TS3 7-axis cnc control, (5) axis back gauge (X,R,Z1,Z2,X1), Windows Based Controls, Hydraulic Clamping
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 8:55 AM
Industry: General Machinery & Equipment
Description: Vanguard CAK80485D 33” x 204" 2 Axis Flat Bed CNC Lathe (2007)
Fanuc 0i Mate-TC CNC Control, 25" 4 Jaw Chuck, 32" x 191" Centers, (2) Steady Rest(s), (2) Follow Rest(s)
Fanuc 0i Mate-TC CNC Control, 25" 4 Jaw Chuck, 32" x 191" Centers, (2) Steady Rest(s), (2) Follow Rest(s)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Max. tools: 31
Tool Size: .625" x 3.94" (square) / 25mm (round)
Main & Back Spindle: 8000 rpm
Rapid Traverse: 32 m/min (105 ft/min) [(X1, Y1, Y2,: 24 m/min (78.74 ft/min)]
Working barstock dia: 1.26"
Max machining length: 12.6" Direct-Drive Guide Brush
2.76" - Guide Brushless
Max main spindle drill dia: .39"
Max main spindle tap dia: M10
Max back spindle chuck dia:1.26"
Max back spindle drill dia: .39"
Max back spindle tap dia: M8
Fanuc 0i-TD
Tool Size: .625" x 3.94" (square) / 25mm (round)
Main & Back Spindle: 8000 rpm
Rapid Traverse: 32 m/min (105 ft/min) [(X1, Y1, Y2,: 24 m/min (78.74 ft/min)]
Working barstock dia: 1.26"
Max machining length: 12.6" Direct-Drive Guide Brush
2.76" - Guide Brushless
Max main spindle drill dia: .39"
Max main spindle tap dia: M10
Max back spindle chuck dia:1.26"
Max back spindle drill dia: .39"
Max back spindle tap dia: M8
Fanuc 0i-TD
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Description: Fast 10 Position Servo Turret
Non-stop Bi-directional Tool Indexing Servo Turret … [Read more...]
Non-stop Bi-directional Tool Indexing Servo Turret … [Read more...]
Tailstock w/ Programmable Quill
Lift Up Style Chip Conveyor
8.4" LCD Color Monitor
10" hydraulic chucking system
X Axis (Max Cross Travel): 6.89"+0.79"
Z Axis: 20.2"
Swing Over Bed: 21.6"
Swing Over Carriage: 16.5"
Max Turning Dia: 13.7"
Distance btw Centers: 27.1"
Max Turning: 20.2"
Spindle Nose: A2-8 ASA
Through Hole/bar: 3.46"/2.5
20HP
Quill dia: 3.93"
Max Quill Travel: 3.93"
MT-#5 Taper
Lift Up Style Chip Conveyor
8.4" LCD Color Monitor
10" hydraulic chucking system
X Axis (Max Cross Travel): 6.89"+0.79"
Z Axis: 20.2"
Swing Over Bed: 21.6"
Swing Over Carriage: 16.5"
Max Turning Dia: 13.7"
Distance btw Centers: 27.1"
Max Turning: 20.2"
Spindle Nose: A2-8 ASA
Through Hole/bar: 3.46"/2.5
20HP
Quill dia: 3.93"
Max Quill Travel: 3.93"
MT-#5 Taper
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Max tool positions: 29
Max. drill dia: 0.511″
Max. tap dia: M12
Main & Back spindle index: 360° (Full C)
Main spindle: 6.000RPM
Main spindle motor: 11kw
Back spindle: 7,000 RPM
Back spindle motor: 5.5kw
Front turn stations: 5
Back turn stations: 5
Front drill head stations: 5
Turn stations: 2
Live cross mill stations: 4
Live sub mill stations: 8
Driven tool: 6,000RPM
Driven tool motor: 1.4kw
12' barloader
Misc. Tooling
Max. drill dia: 0.511″
Max. tap dia: M12
Main & Back spindle index: 360° (Full C)
Main spindle: 6.000RPM
Main spindle motor: 11kw
Back spindle: 7,000 RPM
Back spindle motor: 5.5kw
Front turn stations: 5
Back turn stations: 5
Front drill head stations: 5
Turn stations: 2
Live cross mill stations: 4
Live sub mill stations: 8
Driven tool: 6,000RPM
Driven tool motor: 1.4kw
12' barloader
Misc. Tooling
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 3, 2026 at 7:07 AM
Industry: General Machinery & Equipment
From local aerospace facility
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 7:37 PM
Industry: Circuit Breakers
Description: Complete FTL3200 Squared
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 4:52 PM
Industry: General Machinery & Equipment
Price: 75000
Capacity
X Travel: 430"
Y Travel: 120"
Z Travel: 48"
Table Size: 480" x 120"
Daylight Under Bridge: 50”
Distance between columns: 128”
Quill Travel: 7"
Spindle:
10 HP Rambaudi Spindle Head
Manual A-axis tilt (+/- 25 deg)
Spindle Speeds: 3000 RPM
Spindle Taper: 50 Taper
Used to have 2 head but was customized by Criterion Machinery for FMC Munitions to make ballistic panels for APCs. 380” x 120” x54” for head. 10HP Motor; Gearbox speed is not sp
X Travel: 430"
Y Travel: 120"
Z Travel: 48"
Table Size: 480" x 120"
Daylight Under Bridge: 50”
Distance between columns: 128”
Quill Travel: 7"
Spindle:
10 HP Rambaudi Spindle Head
Manual A-axis tilt (+/- 25 deg)
Spindle Speeds: 3000 RPM
Spindle Taper: 50 Taper
Used to have 2 head but was customized by Criterion Machinery for FMC Munitions to make ballistic panels for APCs. 380” x 120” x54” for head. 10HP Motor; Gearbox speed is not sp
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 4:22 PM
Industry: Circuit Breakers
Description: We are looking a price for 4 of these breakers, aftermarket, new or refurbished. We need ADVAC Model 3.
We already have a quote from ABB however their newest generation (ADVAC 4.76KV-1200A-50KA Model 4 ) require modifications to our existing breaker cells which we are unable to shut down to complete.
We already have a quote from ABB however their newest generation (ADVAC 4.76KV-1200A-50KA Model 4 ) require modifications to our existing breaker cells which we are unable to shut down to complete.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 3:47 PM
Industry: Circuit Breakers
Description: Looking for an ABB 1600A 600V breaker model E3S-A 16 with a PR121/P relay having LI functions minimum, drawout type. There are some accessories information on the face of the breaker, I could send clear pictures, just let me know, thank you.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 3:34 PM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: (4) Citizen 12mm Channel Sets for Citizen Model CAV12-LE-IS 12' Bar Feeds. Never Used, Still in Boxes.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 3:20 PM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: Haas Model HA5C Indexers. (3) With 17-Pin Connector Cable and (1) with a 10-Pin and a 7-Pin Connector Cables, Lever Collet Closers.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 3:16 PM
Industry: General Machinery & Equipment
Description: DMTG Model CKE6180Z 31" x 79" (800 x 2000) Flat Bed CNC Lathe, Fagor 8055TC CNC Control, 40 – 1,000 RPM, 15 Hp, 16" 3-Jaw Chuck, 20" Face Plate, Shars Tool Post, 6-Position Vertical Turret, Tail Stock, Steady Rest, Coolant System, Manual, 3.9" H.I.S. Extended X-axis, New 2011.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 2:51 PM
Industry: Other Electrical & Power Equipment
Description: Qty 3 Westinghouse Station Surge Arrester EVP0029003001 or equivalent
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 2:15 PM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: 8' - 10' 5/8" 4 Roll Plate Roll
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 2:14 PM
Industry: General Machinery & Equipment
Price: POR
Description: 40’ X 40” CNC Single Spindle Drill Line with Siemens CNC Control Console, 40’ Bed, 1-9/16” Drill Capacity and Drill.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 1:14 PM
Industry: Other Electrical & Power Equipment
Description: For pricing, quantity available, and additional photos, please reach out to us at the provided contact information.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 1:12 PM
Industry: Other Electrical & Power Equipment
Description: For pricing, quantity available, and additional photos, please reach out to us at the provided contact information.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 1:07 PM
Industry: Other Electrical & Power Equipment
Description: The ABB ACH550 AC Drive with Bypass is a high-quality industrial automation product designed for controlling the speed of 3-phase motors up to 15 horsepower. This specific model, ACH550-VCR-023A-4, is manufactured in the United States and features a NEMA 1 enclosure for added protection.
For pricing, quantity, and additional photos, please reach out at the provided contact information.
For pricing, quantity, and additional photos, please reach out at the provided contact information.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:33 AM
Industry: General Machinery & Equipment
Description: 4.3" Stanko, HBM, X =48”, Y=40”, W=43”. Z=28”, Heidenhain Three Axis Digital Readout, Built In T-Slotted Rotary Table,
Pendant Control, Harden Ways, Hydraulic Unit, Way Covers, Work Light
Pendant Control, Harden Ways, Hydraulic Unit, Way Covers, Work Light
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:31 AM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:29 AM
Industry: General Machinery & Equipment
Description: 53” x 393" Poreba Model TR135-B2/10M Gap Bed Lathe, 500 RPM, Inch & Metric Threading, 4.73" Spindle Bore, 63" Swing in Gap, 41" Swing Over Cross Slide, 5 Steady Rests, 32" 4-Jaw Chuck
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:20 AM
Industry: General Machinery & Equipment
Work Loading Mass: 1763lbs
Max Turn Length / Height: 33”
Spindle Nose Shape: A2-11
Spindle Front Bearing Dia.: 7.87”
Spindle Speed:
10 to 180
12 to 530
15 to 340
20 to 1000
Turret Type: 12
X-Axis: 18.5”
Z-Axis: 33”
Rapid Traverse: 944 IPM
Spindle Motor: 60/50 HP
OSP-P200L Control
High Pressure Coolant 15KG/CM2
Touch Setter QTS Manual/Auto
Spindle Motor Upgrade 45/37KW Transmission
Consep Conveyor 2000 V80R
31.49” SMW-Autoblok 800mm Chuck
Max Turn Length / Height: 33”
Spindle Nose Shape: A2-11
Spindle Front Bearing Dia.: 7.87”
Spindle Speed:
10 to 180
12 to 530
15 to 340
20 to 1000
Turret Type: 12
X-Axis: 18.5”
Z-Axis: 33”
Rapid Traverse: 944 IPM
Spindle Motor: 60/50 HP
OSP-P200L Control
High Pressure Coolant 15KG/CM2
Touch Setter QTS Manual/Auto
Spindle Motor Upgrade 45/37KW Transmission
Consep Conveyor 2000 V80R
31.49” SMW-Autoblok 800mm Chuck
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:13 AM
Industry: Forklifts, Construction & Earthmoving
Price: 35000
Description: The Tool & Hoist Specialties Overhead Crane is a high-quality lifting solution made in the United States. With a 5-ton capacity and a 36' span, this crane is designed for efficient and precise material handling in various industrial and business settings. The brand's reputation for excellence in craftsmanship ensures that this overhead crane is a reliable and durable option for lifting heavy loads with ease.
Additional photos available upon request.
Additional photos available upon request.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:12 AM
Industry: General Machinery & Equipment
Machining Length: 43.30"
Chuck Size: 10"
Max Bar Capacity: 2.7"
Spindle Bore: 3.15"
X Axis Travel: 9.05"
Z Axis Travel: 45.03"
Rapid Traverse (X/Z): 787 ipm
Spindle Nose: A2-8
Spindle Speed: 3,000 rpm
Main Motor: 20 hp
Turret Capacity: 12 Station
Turret Travels: 9.25: x 45.04"
Chip Conveyor
Tool Presetter
Tailstock
OSP-P300L-R Control
Dimensions: 140" X 85" X 77"
Weight: 14,330 lb
Chuck Size: 10"
Max Bar Capacity: 2.7"
Spindle Bore: 3.15"
X Axis Travel: 9.05"
Z Axis Travel: 45.03"
Rapid Traverse (X/Z): 787 ipm
Spindle Nose: A2-8
Spindle Speed: 3,000 rpm
Main Motor: 20 hp
Turret Capacity: 12 Station
Turret Travels: 9.25: x 45.04"
Chip Conveyor
Tool Presetter
Tailstock
OSP-P300L-R Control
Dimensions: 140" X 85" X 77"
Weight: 14,330 lb
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 11:10 AM
Industry: Forklifts, Construction & Earthmoving
Price: 15000
Description: The Tool & Hoist Specialties Overhead Crane is a 5-ton hoist with a 23'3" span, designed and manufactured in the United States. With a focus on quality and durability, this crane is perfect for material handling and lifting tasks in various industrial settings. The brand's expertise in creating specialized tools and hoists ensures that this overhead crane is a reliable and efficient solution for businesses needing to lift and transport heavy loads.
Additional photos available upon request.
Additional photos available upon request.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 10:59 AM
Industry: Forklifts, Construction & Earthmoving
Price: 25000
Description: 2 in stock.
The Tool & Hoist Specialties Overhead Crane is a versatile 5-ton hoist designed for a span ranging from 2' to 17'. This crane, manufactured by Tool & Hoist Specialties, is perfect for material handling and lifting heavy loads in various industrial and business settings. With a strong brand reputation and high-quality construction, this overhead crane provides reliable and efficient lifting capabilities for a wide range of applications. … [Read more...]
The Tool & Hoist Specialties Overhead Crane is a versatile 5-ton hoist designed for a span ranging from 2' to 17'. This crane, manufactured by Tool & Hoist Specialties, is perfect for material handling and lifting heavy loads in various industrial and business settings. With a strong brand reputation and high-quality construction, this overhead crane provides reliable and efficient lifting capabilities for a wide range of applications. … [Read more...]
Additional photos available upon request.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 10:57 AM
Industry: General Machinery & Equipment
Description: Swing Over Bed / Saddle: 30.7″ / 29.1″
Max Turn Dia Upper / Lower: 15.4″ / 11.8″ … [Read more...]
Max Turn Dia Upper / Lower: 15.4″ / 11.8″ … [Read more...]
Max Turn Dia Length: 36.2″
Main Spindle: 5000 RPM
Spindle Bore / Bar Cap / Spindle Nose: 3.1″ / 2.56″ / A2-8
Sub-Spindle: 5000 RPM
(2) 12 Stations Turret
X-Axis (upper / lower): 10.63″ / 7.48″
Z-Axis (upper / lower): 36.22″ / 11.3″
Y-Axis: + / – 4.7″
B-Axis: 39.4″
360 C-Indexing
Rotary Tool: 4000 RPM
LNS Turbo Chip Conveyor, Tool Preset, Parts Catcher, Barfeed Interface
14 ID 11 OD 3 Live Tools
Main Spindle: 5000 RPM
Spindle Bore / Bar Cap / Spindle Nose: 3.1″ / 2.56″ / A2-8
Sub-Spindle: 5000 RPM
(2) 12 Stations Turret
X-Axis (upper / lower): 10.63″ / 7.48″
Z-Axis (upper / lower): 36.22″ / 11.3″
Y-Axis: + / – 4.7″
B-Axis: 39.4″
360 C-Indexing
Rotary Tool: 4000 RPM
LNS Turbo Chip Conveyor, Tool Preset, Parts Catcher, Barfeed Interface
14 ID 11 OD 3 Live Tools
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 10:53 AM
Industry: General Machinery & Equipment
Description: several HYDRO-PAC FX series, high pressure Nitrogen compressors , single and two stage , max discharge pressure 30000 and 40000 psi, motors 60 and 100 hp .
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 10:50 AM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 10:48 AM
Industry: General Machinery & Equipment
Description: 27.5" x 27.5" x 118" Marvel/Spartan plate saw , 2" blade , stationary table, moveable head , IL location, Mfg. 2012
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: Haas UMC-750SS 5 Axis Universal Machining Center (2015+)
*****Must have Probing
*****Must have Probing
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 9:00 AM
Industry: General Machinery & Equipment
Price: 10500
Description: SERIAL ..................... 1889
MODEL ...................... RCBRE11DCMD … [Read more...]
MODEL ...................... RCBRE11DCMD … [Read more...]
NEW ........................ 2003
CUT HEIGHT ................. 31″
BENDING TABLE HEIGHT ....... 36″
CUTTER CYCLE TIME .......... 2 seconds
BENDER SPEED ............... 0 TO 22 RPMs.
HYDRAULIC OIL CAPACITY ..... 42 gallons
FOOT CONTROL ............... YES
MOTOR ...................... 20 HP
CUT HEIGHT ................. 31″
BENDING TABLE HEIGHT ....... 36″
CUTTER CYCLE TIME .......... 2 seconds
BENDER SPEED ............... 0 TO 22 RPMs.
HYDRAULIC OIL CAPACITY ..... 42 gallons
FOOT CONTROL ............... YES
MOTOR ...................... 20 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 8:29 AM
Industry: Transformers
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 7:33 AM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: Haas DS-30Y Live Tool CNC Lathe (2014+)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 7:16 AM
Industry: Processing Equipment
Description: I have a large ion pump (Thermionics Lab HP-200) that was acquired approximately 12 years ago for a project that ultimately did not progress to the stage where the pump was installed. As the project is no longer active, the pump has remained unused in my lab since then. I would greatly appreciate it if you could take a look at the pump and, if it aligns with your needs, consider making a purchase offer. Thank you for your time and consideration. I look forward to hearing from you.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 2, 2026 at 4:40 AM
Industry: General Machinery & Equipment
Description: Year Model Type Free Air Delivery (FAD) (CFM) Working Pressure Nominal Power Units
1997 LMF 47/138(42/207) E-60 47 / 43m3 / min (1660 / 1500) FM 138/207 bar 737 kW 3 … [Read more...]
1997 LMF 47/138(42/207) E-60 47 / 43m3 / min (1660 / 1500) FM 138/207 bar 737 kW 3 … [Read more...]
2006 LMF 48/138-207 E60 48 m3 / min (169% CFM) 138/207 bar 850 kW
1
1
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 7:29 PM
Industry: General Machinery & Equipment
Price: $1,700
Description: Dreis & Krump Chicago Steel Bending Brake Manual Machine MPN 184 Steel.
Even bend across entire length. … [Read more...]
Even bend across entire length. … [Read more...]
No gaps when clamp.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 4:52 PM
Industry: General Machinery & Equipment
Description: Okuma MA-600HB 4 Axis Horizontal Machining Center (2010)
4 Axis, OSP P200MA CNC, 240 ATC, High Pressure Coolant Through Spindle
4 Axis, OSP P200MA CNC, 240 ATC, High Pressure Coolant Through Spindle
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 4:29 PM
Industry: General Machinery & Equipment
Description: Amada Model LF-1000A-AP-M50 CNC Fiber Laser Welder (2023)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 3:37 PM
Industry: Processing Equipment
Budget: $10,001 - 50,000
Description: Looking for a used Tote systems or similar tote tumble mixer
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:45 PM
Industry: Motors - A.C. & D.C.
RPM: 200
VOLTS: 240
AMP: 11.45
FLD AMP: 1.65
FLD OHMS: 106
INS CL B
CONT DUTY
AMB 40C
FRAME: MDY757F
MODEL: 5CY985E3
ENCLOSURE: TENV-WP
S# JR-1-335
VOLTS: 240
AMP: 11.45
FLD AMP: 1.65
FLD OHMS: 106
INS CL B
CONT DUTY
AMB 40C
FRAME: MDY757F
MODEL: 5CY985E3
ENCLOSURE: TENV-WP
S# JR-1-335
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:44 PM
Industry: Motors - A.C. & D.C.
RPM: 200
VOLTS: 240
AMP: 11.45
FLD AMP: 1.65
FLD OHMS: 106
INS CL B
CONT DUTY
AMB 40C
FRAME: MDY757F
MODEL: 5CY985E3
ENCLOSURE: TENV-WP
S# JR-1-335
VOLTS: 240
AMP: 11.45
FLD AMP: 1.65
FLD OHMS: 106
INS CL B
CONT DUTY
AMB 40C
FRAME: MDY757F
MODEL: 5CY985E3
ENCLOSURE: TENV-WP
S# JR-1-335
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:30 PM
Industry: Motors - A.C. & D.C.
VOLTS 230
AMPS: 12
RPM: 650
FRAME: 503
RISE: 75C
SHUNT WOUND
S# 152
AMPS: 12
RPM: 650
FRAME: 503
RISE: 75C
SHUNT WOUND
S# 152
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:26 PM
Industry: Motors - A.C. & D.C.
AMP: 12
RPM: 650
CONT DUTY
FRAME: 503
VOLT:230
RISE: 75C
S:#152
SHUNT WOUND
RPM: 650
CONT DUTY
FRAME: 503
VOLT:230
RISE: 75C
S:#152
SHUNT WOUND
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:14 PM
Industry: Processing Equipment
New - surplus
Call / email
Call / email
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 2:10 PM
Industry: Motors - A.C. & D.C.
Description: (2) New Surplus Weg 1000 hp--893 rpm--4160 volts--7009 frame--WPII--Best offer--Pictures available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 1:29 PM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
Description: need a 10' 3/4" Plate Roll
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 1:25 PM
Industry: General Machinery & Equipment
Price: $13,500
Description: Maxicut 2017 Belmont MX-246 ZNC Sinker EDM OUTPUT 300 A Under power Low hours Nice !! Travel :X-AXIS 18.5”
Y AXIS 14.9” … [Read more...]
Y AXIS 14.9” … [Read more...]
Z AXIS 7.2” For more info Please just ask.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 12:48 PM
Industry: Generators & Engines
Price: $23,500
480 volt, 3 phase, 60hz
Control panel
Circuit breaker
24 volt DC electric start
642 total hours since new
Serial number D780316256
In Very Good Condition
Does not include exhaust silencer
We will provide a compatible silencer
Exhaust flex (shipped loose)
Load tested March 27, 2026 -- Fob Jacksonville FL - $23,500
Control panel
Circuit breaker
24 volt DC electric start
642 total hours since new
Serial number D780316256
In Very Good Condition
Does not include exhaust silencer
We will provide a compatible silencer
Exhaust flex (shipped loose)
Load tested March 27, 2026 -- Fob Jacksonville FL - $23,500
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 12:39 PM
Industry: General Machinery & Equipment
Description: Looking for an independent service tech to help with installation & training on a Schroder folder in Florida
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 11:24 AM
Industry: Other Electrical & Power Equipment
3 POLE CONTACTOR
120V COIL
OPEN TYPE
480V
Aux contacts are not necessary but if I have to pick one. Normally open.
120V COIL
OPEN TYPE
480V
Aux contacts are not necessary but if I have to pick one. Normally open.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 11:11 AM
Industry: General Machinery & Equipment
Description: DMG Mori Model 75 or 85 Monoblock 5-Axis or Okuma Model MU-6300 5-Axis 2015 or newer these 3 Models & Brands Only
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 10:54 AM
Industry: General Machinery & Equipment
Price: $15,900
Chuck Size: 15"
Bar Capacity: 4.5"
Swing Over Bed: 28.6"
Swing Over Cross Slide: 24.1"
Max Turning Diameter: 24.7"
Max Turning Length: 59.9"
Spindle Motor: 30 HP
Spindle Speed: 4,500 RPM
Turret: 12 Station
-EQUIPPED WITH-
Fanuc 0iTC Control
Chip Conveyor
15" 3-Jaw Chuck
Tool Setter
Misc. OD & ID Tool Holders
Bar Capacity: 4.5"
Swing Over Bed: 28.6"
Swing Over Cross Slide: 24.1"
Max Turning Diameter: 24.7"
Max Turning Length: 59.9"
Spindle Motor: 30 HP
Spindle Speed: 4,500 RPM
Turret: 12 Station
-EQUIPPED WITH-
Fanuc 0iTC Control
Chip Conveyor
15" 3-Jaw Chuck
Tool Setter
Misc. OD & ID Tool Holders
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 10:50 AM
Industry: Transformers
Description: Looking to rebuild and in need of parts
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 10:35 AM
Industry: Circuit Breakers
Description: FPE BREAKER BOLT IN NB232060
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 10:29 AM
Industry: General Machinery & Equipment
Description: I'm looking for used/refurbished walk-in electric oven.
Inside dimension minimum 8'x7'x 8' high. … [Read more...]
Inside dimension minimum 8'x7'x 8' high. … [Read more...]
480v need to know the amperage and the outside dimensions.
this should make it easier.
thank you.
this should make it easier.
thank you.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 10:10 AM
Industry: General Machinery & Equipment
Price: $12,500
Table Size: 39.25" x 93.25"
Table Load: 8,800 LBS
X Axis Travel: 86.61"
Y Axis Travel: 39.37"
Z Axis Travel: 31.50"
Spindle Taper: BT-50
Spindle Speed: 6,000 RPM
Spindle Motor: 30 HP
Tool Changer Capacity: 32 ATC
Machine Dimensions: 225" x 154" x 142"H
Machine Weight: 44,000 LBS
-EQUIPPED WITH-
FANUC SERIES 18I-MB
32 POSITION ATC
1000PSI Coolant Through Spindle
Box Ways
RENISHAW TS27R Tool Setter
50+ Tool Holders Include
Table Load: 8,800 LBS
X Axis Travel: 86.61"
Y Axis Travel: 39.37"
Z Axis Travel: 31.50"
Spindle Taper: BT-50
Spindle Speed: 6,000 RPM
Spindle Motor: 30 HP
Tool Changer Capacity: 32 ATC
Machine Dimensions: 225" x 154" x 142"H
Machine Weight: 44,000 LBS
-EQUIPPED WITH-
FANUC SERIES 18I-MB
32 POSITION ATC
1000PSI Coolant Through Spindle
Box Ways
RENISHAW TS27R Tool Setter
50+ Tool Holders Include
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 9:16 AM
Industry: Other Electrical & Power Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 9:11 AM
Industry: Transformers
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 9:11 AM
Industry: Generators & Engines
Price: 800000
Description: Caterpillar 3512 Diesel Generator Package – (3) x 1500KW w/ Paralleling Gear – 4.5MW System
Complete 4.5MW backup power solution, consisting of (3) matching Caterpillar 3512 diesel generator sets with integrated paralleling capabilities, plus associated switchgear. Option available to expand to a 4th unit for increased capacity. … [Read more...]
Complete 4.5MW backup power solution, consisting of (3) matching Caterpillar 3512 diesel generator sets with integrated paralleling capabilities, plus associated switchgear. Option available to expand to a 4th unit for increased capacity. … [Read more...]
Generator Specifications (per unit)
Manufacturer: Caterpillar
Engine Model: 3512
Year: 2005
Rating: 1500 KW / 1875 KVA
Manufacturer: Caterpillar
Engine Model: 3512
Year: 2005
Rating: 1500 KW / 1875 KVA
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 9:02 AM
Industry: General Machinery & Equipment
Description: 25 " to 30" swing x 170" to 200" long roll grinder, will not consider older than 80's machines and must be in very good condition.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 8:58 AM
Industry: General Machinery & Equipment
Description: Sharp knee type mill LMV/DVS , 9" X 42" table , variable speed, Accurite dro, mfg. 2008
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 8:31 AM
Industry: General Machinery & Equipment
Description: 3" X 5" Ruesch 2 Hi Rolling Mill, 5 HP, Spare Rolls
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 8:28 AM
Industry: General Machinery & Equipment
Description: Mechanical Press to make a 1" OD X 0.10" Wall Thickness Platinum Tube from a 7" Dia. X 0.10" Disk
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 8:25 AM
Industry: General Machinery & Equipment
Description: Butt Welder for Max. 1/2" Dia. Stainless rod alloy 304
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 8:12 AM
Industry: General Machinery & Equipment
Price: 69500
Description: 3/16" thick 304L stainless steel tanks
1/8" thick 304L stainless steel housings … [Read more...]
1/8" thick 304L stainless steel housings … [Read more...]
1/8" thick 304L stainless steel drain decks
Heavy-duty conveyor rated for 20,000 lbs/hour throughput
Variable conveyor speed: 1.4 TO 3.8 FPM
Designed for continuous industrial duty, this washer delivers exceptional durability, corrosion resistance, and reliable performance for high-volume cleaning applications.
Heat Type: Electrical
Industrial Solvent-Type Parts Cleaner
DIMENSIONS 14'-2" L x 8'-6" W x 9
Heavy-duty conveyor rated for 20,000 lbs/hour throughput
Variable conveyor speed: 1.4 TO 3.8 FPM
Designed for continuous industrial duty, this washer delivers exceptional durability, corrosion resistance, and reliable performance for high-volume cleaning applications.
Heat Type: Electrical
Industrial Solvent-Type Parts Cleaner
DIMENSIONS 14'-2" L x 8'-6" W x 9
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 7:37 AM
Industry: Transformers
Description: We are looking for a 2000 - 2500 KVA oil filled substation transfomer. 13,200 primary, 480/277 secondary. Would like with primary side cable cabinet and secondary side with 2500 amp circuit breaker and cabinet. Prefer transformer filled with mineral oil
Looking to buy ASAP and will be shipped to Uncasville CT 06382
Looking to buy ASAP and will be shipped to Uncasville CT 06382
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 1, 2026 at 7:13 AM
Industry: General Machinery & Equipment
Price: 20,000.00
Description: 54" 3 Axis Southwestern Prototrak. Inspected and PM's completed by Southwestern every year.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 4:49 PM
Industry: Other Electrical & Power Equipment
Description: Falk Model: 1160YFN1S, Ratio: 4.088:1 (other models 1165YFN1) Must be either of these models
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:53 PM
Industry: General Machinery & Equipment
No conveyor
Manual or Auto tie
Manual or Auto tie
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:23 PM
Industry: Generators & Engines
Budget: Over $100,000
Description: Nas gas high power Gen-engines wanted
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:21 PM
Industry: Forklifts, Construction & Earthmoving
Budget: $50,001 - $100,000
Description: Twin-disc TA90 8501 with the matched convertor
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:19 PM
Industry: General Machinery & Equipment
Description: DMC Model DL22LA CNC Lathe, Fanuc 0i-TF Plus 2-Axis Control, 21.65" Swing, 21.26" Turning Length, 13.78" Turning Diameter, 2.56" Bar Capacity. 4,000 RPM, 20 Hp, 8" 3-Jaw Power Chuck, 12-Station Servo Turret, Programmable Tail Stock & Quill, Box Ways, Tool Presetter, Chip Conveyor, Parts Catcher, New 11/2022.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:19 PM
Industry: Forklifts, Construction & Earthmoving
Budget: $10,001 - 50,000
Description: Welcome the Allison 9000 series transmission
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:17 PM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: (4) Citizen 12mm Channel Sets for Citizen Model CAV12-LE-IS 12' Bar Feeds. Never Used, Still in Boxes.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:16 PM
Industry: General Machinery & Equipment
Price: MAKE AN OFFER
Description: Haas Model HA5C Indexers. (3) With 17-Pin Connector Cable and (1) with a 10-Pin and a 7-Pin Connector Cables, Lever Collet Closers.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 3:06 PM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: Core engines as it was. Huge amount needed.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: March 31, 2026 at 1:58 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: Available to buy! Acer Dynamic series Precision Engine Lathe, Bullard Vertical Turret Lathe, Chevalier FCL1840A Lathe plus, Dake 50Ton H-Frame hydraulic Press, Forges Horizontal Boring Mill, Fryer EZturn18 CNC lathe, H.E.S. 20 Engine Lathe, Lagun Republic Vertical Milling machine, Mori Seiki MS1250 Engine Lathe, Norton Plain Angle head Cylindrical gringer, Radial Arm Drill Press, Varnamo EV-2 Shaper, Mazak Holemaster, Wewag Lathe. Freight to be provided/paid for by buyer. Pics upon request
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
