Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: April 22, 2026 at 11:29 AM
Industry: Motors - A.C. & D.C.
Price: 6000
Description: This W22 NEMA Premium Efficiency 125 HP 4P 444/5T 3Ph 460 V 60 Hz IC411 - TEFC is a new unit that has never been put into service. Has been professionally tested and is in perfect working condition
Energy Savings: The NEMA Premium efficiency rating typically pays for the motor itself in energy savings over its first few years of operation. … [Read more...]
Energy Savings: The NEMA Premium efficiency rating typically pays for the motor itself in energy savings over its first few years of operation. … [Read more...]
Thermal Management: The aerodynamic fan cover design and FC-200 grade cast iron frame maximize heat dissipation, significantly extending the life of the wi
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 11:23 AM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: 3512MUI Engine Core - 49y or 3YF prefix - with 3161 Governor and HMSO. 1500hp
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:47 AM
Industry: General Machinery & Equipment
.250" mild steel
Hydraulically actuated
Squaring Arm
Back Gauge
Rear Stacker
good to excellent condition
prefers Cincinnati
Hydraulically actuated
Squaring Arm
Back Gauge
Rear Stacker
good to excellent condition
prefers Cincinnati
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:46 AM
Industry: General Machinery & Equipment
Description: 2006 Hardinge GX480. DT APC, 3 position 5-C 4th axis collet closer, BT30 spindle 15000 rpm extra parts for pallet changer(hard to find), 27000 on hrs.17700 working hrs . spindle rebuilt 5000 hrs ago aprox. Z axis screw also replaced minor repairs needed machine stored 2 years
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 10:22 AM
Industry: Circuit Breakers
Budget: Up to $5,000
Description: Looking for 1 15kva 12,000 volt Control Power Transformer (CPT)
100-1 ratio
100-1 ratio
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:56 AM
Industry: General Machinery & Equipment
Price: 12500
Description: SERIAL ...................... SMX241607
MODEL ....................... SMX-24 … [Read more...]
MODEL ....................... SMX-24 … [Read more...]
WIDTH ....................... 24"
THICKNESS ................... .093"
LENGTH ...................... 999.99"
PASS LINE ................... 49" ADJUSTABLE
CONTROL ..................... SERVOMAX II
PRESS MOUNTED
THICKNESS ................... .093"
LENGTH ...................... 999.99"
PASS LINE ................... 49" ADJUSTABLE
CONTROL ..................... SERVOMAX II
PRESS MOUNTED
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:38 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: Well-maintained AXYZ 5036 Panel Builder CNC router, designed for high-throughput routing of aluminum composite material (ACM), plastics, and similar sheet goods. Machine is equipped with (3) independently controlled 5 HP HSD spindles (ELTE). Working envelope is approximately 72" (Y) x 432" (X) x 6" (Z). Controlled by AXYZ A2MC w/ Ethernet connectivity. Serviced with a full inspection and preventative maintenance completed by AXYZ on 1/21/2026. Machine is currently under power. Serial# 6009-5899
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:31 AM
Industry: Other Electrical & Power Equipment
Description: Hello, My name is Tony and I am looking for a Dead Tank, SF6, 145KV max (138KV nominal), 2000A, 63kA, 3-cycle interrupting time, 125VDC control voltage.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Description: I have inherited a metal lathe from my dad. I’d love to list it to see if someone would want it versus sending it to scrap. I have contacted the Manufacturer, and they do not have this model on file anymore. Does any dealer want it?
I have attached some photos. It is a Southbend precision lathe, model C. 3 1/2 foot bed length.
I have attached some photos. It is a Southbend precision lathe, model C. 3 1/2 foot bed length.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:23 AM
Industry: General Machinery & Equipment
Price: $52,900.00 LESS 10%
Description: 6'6" X 10', 30 HP 60,000 PSI INTENSIFIER, HOPPER, VERY GOOD CONDITION, READY TO SHIP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:21 AM
Industry: General Machinery & Equipment
Description: Acme-Gridley 1 1/4"RA6 screw machine
Index MS52 6 spindle screw machine … [Read more...]
Index MS52 6 spindle screw machine … [Read more...]
Gildemeister GM20AC 6 spindle screw machne
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:19 AM
Industry: General Machinery & Equipment
Description: Extrude Hone Model C-250 Thermal deburring machine mfd. 2018
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 9:15 AM
Industry: General Machinery & Equipment
Description: 900 - 1000 Ton Plastic Injection Molding Machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:35 AM
Industry: Processing Equipment
Description: Hi There, i am looking for an arctic package TEG system with a 500K BTU/hr burner.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:14 AM
Industry: Other Electrical & Power Equipment
Description: Please quote and availability (6) - 200a 600v type J fuses
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 22, 2026 at 7:07 AM
Industry: Processing Equipment
Price: 12000
Description: Zurn Z1188‑ST‑200‑4IP Large Capacity Oil Interceptor – 200 GPM Fabricated steel oil interceptor with integral storage tank. Acid‑resistant coated interior and exterior. Unit rated at 200 GPM with ~333‑gallon water capacity. Never placed into service. Includes covers and original fittings shown. Availability without factory lead times located in Mechanicsburg, PA. Buyer is responsible for freight, loading assistance available.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 5:11 PM
Industry: Motors - A.C. & D.C.
Application for pump
Right now as the nameplate. Open for Standard bearing.
Thanks
Right now as the nameplate. Open for Standard bearing.
Thanks
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 4:46 PM
Industry: General Machinery & Equipment
Description: Okuma GP-26T CNC Cylindrical Grinder (2011)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 4:07 PM
Industry: General Machinery & Equipment
Price: 12500
Description: CAPACITY ...................... 110 TONS
MAX PUNCHING DIAMETER ......... 1-1/4" … [Read more...]
MAX PUNCHING DIAMETER ......... 1-1/4" … [Read more...]
MAX PUNCHING THICKNESS ........ 1"
ANGLE(L1 ...................... 6 x 6 x 5/8"
THROAT DEPTH .................. 16"
STROKE ........................ 2-3/8"
DIMENSIONS .................... 74" x 30" x 89"
ANGLE(L1 ...................... 6 x 6 x 5/8"
THROAT DEPTH .................. 16"
STROKE ........................ 2-3/8"
DIMENSIONS .................... 74" x 30" x 89"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:40 PM
Industry: General Machinery & Equipment
Description: Accurpress 519012 Accell 190-12 CNC Press Brake (2011)
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability
8 Axis, 101" Capacity Back Gauge, Auto Crowning, Hydraulic Clamping, Vision Control, 3D Capability
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:25 PM
Industry: Circuit Breakers
Description: Looking for multiple GE AKS-5A-50 breakers. Prefer manually operated breakers but quote any you have that pass NETA spec for insulation resistance. This is a factory replacement breaker for the AK-50 using AKR parts
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 3:14 PM
Industry: General Machinery & Equipment
Price: $7500.00
Description: The Despatch LAC1-67 is a 6.7 cu ft high-performance, benchtop, mechanical convection lab oven, designed for precise, uniform heating up to 260°C (500°F). It features horizontal airflow, digital controls, and stainless steel interior, ideal for curing, drying, annealing, and testing.
Certified MTP +4 … [Read more...]
Certified MTP +4 … [Read more...]
Key Specifications & Features
Capacity: 6.7 cu ft (189 liters).
Temperature: Maximum 260°C (500°F).
Airflow: Horizontal recirculating airflow for superior uniformity.
Capacity: 6.7 cu ft (189 liters).
Temperature: Maximum 260°C (500°F).
Airflow: Horizontal recirculating airflow for superior uniformity.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:50 PM
Industry: Motors - A.C. & D.C.
Description: I am writing to enquire about this motor if you have some available. Details information: 250HP, 500V DC, 398A, 850/1020RPM, frame: 587ATZ, Duty: cont. Ambient: 40c, Winding: STAB SHUNT.
Please the name plate is attached for further information. … [Read more...]
Please the name plate is attached for further information. … [Read more...]
Thank you
Kind regards
Isaac Ndede
Kind regards
Isaac Ndede
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:45 PM
Industry: General Machinery & Equipment
4 jaw independent chuck
Still in Connecticut shop under power. Still making parts
$8K net
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Still in Connecticut shop under power. Still making parts
$8K net
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:28 PM
Industry: General Machinery & Equipment
4 jaw independent chuck
Still in Connecticut shop under power. Still making parts
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Still in Connecticut shop under power. Still making parts
MUST BE MOVED 4/29 - 4/30 BECAUSE RIGGER WILL BE ON SITE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:22 PM
Industry: General Machinery & Equipment
Description: 60" - 72" CNC VTL with Living Milling, 2005 and Newer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:01 PM
Industry: General Machinery & Equipment
Description: Also looking for SR20 and other later model Stars
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:00 PM
Industry: General Machinery & Equipment
Description: Also looking for L32 and other Citizens in good condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 2:00 PM
Industry: General Machinery & Equipment
2 NCU
2 Syncrons
2 Y-Axis
Control: Siemens Solution Line
Knoll System
Bar Feed: IEMCA SIR rack loader (12-ft)
22,000 on-hours
10,000-15,000 Hours
2 Syncrons
2 Y-Axis
Control: Siemens Solution Line
Knoll System
Bar Feed: IEMCA SIR rack loader (12-ft)
22,000 on-hours
10,000-15,000 Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Description: Spinner MICROTURN 52 LTBS
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles … [Read more...]
AUTOMATION READY - MC0122
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Mfd. 2025
Original quote: $732,796.41
Less than 300 hours
No bar feed
Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling
Chucks etc. included Yes
Coolant: used Water Based
What kind of facility is it in? R and D for performance parts for injector and turbos
Specifications
Work Area:
Swing Diameter: 23.9 in (608 mm)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:56 PM
Industry: Circuit Breakers
Description: 15-GMI-500-2000-37 Prefer 120VAC charge and 48VDC close and trip but we can modify if needed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:34 PM
Industry: Generators & Engines
Price: 36,500.00
Description: 2005 Cummins 855 Nat Gas Generator set, Battery charge, Jaket water heater. Weather enclosed, FOB -Gill Colorado
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 1:01 PM
Industry: Generators & Engines
Price: 20000
Year 2001
288kVA
230kW
0.8 COS
60Hz
3-Phase
12-Wire
For additional photos, please reach out at the contact information provided.
288kVA
230kW
0.8 COS
60Hz
3-Phase
12-Wire
For additional photos, please reach out at the contact information provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 12:27 PM
Industry: Processing Equipment
Description: I am looking for a Sprout/Waldron screener, model 3 1/2 x 7 with a single deck.
If you have anything for sale in this model please contact me with the price and details. … [Read more...]
If you have anything for sale in this model please contact me with the price and details. … [Read more...]
Thank You
Daniel Moore.
Daniel Moore.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:48 AM
Industry: Circuit Breakers
Description: 7850 4160 120 360 AMPS STARTER WANT AIR STARTER OR VACUUM UPGRADE GOULD ABB
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:43 AM
Industry: Circuit Breakers
Description: Toshiba HV6CS-MLD-VS BREAKER 24VDC TRIP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:37 AM
Industry: General Machinery & Equipment
Description: SMTCL TPX6113B/2 5.12" Table Type Horizontal Boring Mill (2011)
Equipped With … [Read more...]
Equipped With … [Read more...]
Facing Head
3 Axis Digital Readout
Built in Rotary Table
3 Axis Digital Readout
Built in Rotary Table
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 11:30 AM
Industry: Circuit Breakers
Description: Looking for a Siemens type 05-GMSG-GCB-0040-3000-110 breaker; 5KV, 3000A, 120vAC control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:54 AM
Industry: General Machinery & Equipment
Description: Royal Master TG-12x4 or TG-12x3 centerless grinder for rebuild, cheap buyer!!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:49 AM
Industry: Circuit Breakers
Description: Looking for a rectifier assembly for Westinghouse DH gear. PN is 412D894H44, 240VAC to 125VDC and 100A rating, photo available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:30 AM
Industry: General Machinery & Equipment
Description: APPROXIMATE 30" DIAMETER, 3-JAW, WITH L-3 BACK
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:29 AM
Industry: General Machinery & Equipment
Description: MINIMUM 36" DIAMETER CAPACITY FOR PIPE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 10:16 AM
Industry: General Machinery & Equipment
Description: G&L wet grinder for die repair
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:54 AM
Industry: General Machinery & Equipment
Description: Hurco VMX 30Ui 5 Axis Vertical Machining Center (2020)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:49 AM
Industry: General Machinery & Equipment
Description: Wanted: Hydraulic Plate roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Equipped with: A simple digital readout, NC, or CNC option
Open to mfg.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: Hitachi Seiki CNC lathe - Worked before being unhooked from power
Model HT20SII - Hitecturn20SII … [Read more...]
Model HT20SII - Hitecturn20SII … [Read more...]
12 Tool, 8” Chuck, 15” Swing, 5000 RPM
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
20 HP
Chip Extractor Included
Est. Weight 9,000lbs
Working Condition, Currently Disconnected
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:24 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: OD Cylindrical Grinding Center - worked before being unhooked from power
Manufacturer – Norton … [Read more...]
Manufacturer – Norton … [Read more...]
Model # - CTU 14”
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Year - 1957
48” Center to Center
Estimated weight 10,000 lbs. – 15,000 lbs.
3 Phase
Currently disassembled on pallets for easier transport
Located in Wisconsin, photos available.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 9:11 AM
Industry: General Machinery & Equipment
Description: ALMCO V-14120 Thru-Feed Vibratory Finishing System, 13.8 Cu. Ft. Tub Capacity, 120" L x 14" W x 15-1/2" D Tub, 10-HP Main Motor, (2) Conveyors, New 2022; used approximately 800 hours for a specific job
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:47 AM
Industry: General Machinery & Equipment
Price: 1850$
Description: For sale is a professional-grade Air Cycle Bulb Eater® 3 fluorescent lamp crushing system. This unit was recently acquired as facility surplus and is in full operational condition.
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
The Bulb Eater is the industry standard for safe, EPA/OSHA-compliant lamp disposal. It crushes linear fluorescent lamps into 100% recyclable material while a multi-stage HEPA/Carbon filtration system captures 99.99% of mercury vapors. … [Read more...]
New retails for over $5,000. Great opportunity for a warehouse, school or hospital
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 21, 2026 at 7:29 AM
Industry: Generators & Engines
Description: We are looking for Gas Turbine parts of GE, Siemens, Alstom, Solar, we are buying/selling the Gas Turbine parts.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:41 PM
Industry: General Machinery & Equipment
Price: $5000
Description: WAZER Pro Water Jet Cutting Machine
Machine has less than 13 total hours of run time … [Read more...]
Machine has less than 13 total hours of run time … [Read more...]
The machine is currently experiencing an issue with locating the home position.Until the home position is correctly found, the machine will not proceed with cutting operations.
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
It is unclear whether the issue is a minor adjustment or requires a more involved repair.
This machine is being sold as-is, with no guarantees or warranties implied. Buyer is responsible for troubleshooting, repair, and transport
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:13 PM
Industry: Other Electrical & Power Equipment
Price: 20000
Description: 3 available come with control box that operates all 3 boilers price for each
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 4:07 PM
Industry: General Machinery & Equipment
Description: Need 5 oz glass bottles as many as possible
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 3:34 PM
Industry: General Machinery & Equipment
Description: Hydraulic Plate Roll, IP, Request; 4' roll length
Up to .25" HRS or 10ga AR200 … [Read more...]
Up to .25" HRS or 10ga AR200 … [Read more...]
Must roll down to 9" diameter at .188 HRS
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Wanting some sort of digital repeatability (e.g. a number readout to match roll locations, pressure, etc).
Open to mfg.
Cash buyer.
Equipped with: A simple digital readout, NC, or CNC option, probably depends on the price point from there.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:57 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: 2003 Haas VF-7 CNC Mill with 30 station tool changer, optional hard wire programming, chip auger. Does need the head stock rebuilt.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:37 PM
Industry: Generators & Engines
Description: Kraft have for sale
2 - 1200 KW, 1200 rpm, 60 Hz, 480 vac, On Stock - prior sale … [Read more...]
2 - 1200 KW, 1200 rpm, 60 Hz, 480 vac, On Stock - prior sale … [Read more...]
Call / emial for further information
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:35 PM
Industry: General Machinery & Equipment
Price: Best offer
Description: New, never used Trueline 250N Striper, runs on nitrogen. Comes with 5 gal stainless steel paint tank and 4" box sprayer. Easy to transport. Cost $2095 new.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:11 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:10 PM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 2:09 PM
Industry: General Machinery & Equipment
Price: $55,000
Description: MUST SELL, OWNER NEEDS FLOOR SPACE, WAS $95k, NOW ONLY $55k
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Union BFP130, 5", X=220", Y=119", Z=118", Spindle Support, ISO 50, 1000 RPM, In Feeding Rotary Table 86"x86", Heidenhain TNC355 CNC Control, Facing Head
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:57 PM
Industry: Circuit Breakers
Budget: $10,001 - 50,000
Description: 1 used AKF 2E draw out circuit breaker
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:47 PM
Industry: Transformers
Description: WANT TO BUY DRY TYPE TRANSFORMER 1500KVA 600V PRIM. 480V 3PH SEC.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:44 PM
Industry: General Machinery & Equipment
Price: 545000
Description: 2018 Amera-Seiki Model VT-2000RM Vertical Turning Lathe w/Live Tooling, Fanuc Oi-TF, 78.7 Chuck, 82" Swing under power for another month.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 1:00 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 12:41 PM
Industry: General Machinery & Equipment
Description: 400 to 500 Ton Mechanical Brake, Cincinnati Preferred, 12' Between Housings
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 12:38 PM
Industry: General Machinery & Equipment
Description: Tonnage Capacity: 90 Tons (81.6 Metric Tons)
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Overall Bending Length: 8' (96") (2,438 mm) … [Read more...]
Distance Between Housings: 6' 6" (78.5") (1,994 mm)
Maximum Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Equipped With
Cincinnati PC-Based CNC Control
CNC Backgauge
Secondary Digital Display
Foot C
Maximum Stroke: 14" (355.6 mm)
Open Height: 15" (381 mm)
Closed Height: 7" (177.8 mm)
Throat Depth: 7" (177.8 mm)
Approach Speed: 260 IPM (6,604 mm/min)
Pressing Speed: 1 to 80 IPM (25.4 to 2,032 mm/min)
Return Speed: 280 IPM (7,112 mm/min)
Equipped With
Cincinnati PC-Based CNC Control
CNC Backgauge
Secondary Digital Display
Foot C
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:44 AM
Industry: Motors - A.C. & D.C.
Description: 400HP, 1150/1500 RPM, MCD5453 FRAME, 500V ARM
STABILIZED SHUNT, DPFG-BV
STABILIZED SHUNT, DPFG-BV
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:35 AM
Industry: Motors - A.C. & D.C.
Description: Hello,
Can you let me know if you have the following motor in your stock? … [Read more...]
Can you let me know if you have the following motor in your stock? … [Read more...]
Thanks,
Ricky
Ricky
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 11:09 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:29 AM
Industry: General Machinery & Equipment
Description: Late-model VMC with 50-taper/50-HP spindle and capacity to machine a work-piece measuring 95" X 44" X 30"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:10 AM
Industry: General Machinery & Equipment
Description: Model 51 New Britain 1" 6 spindle with spindle stopping
Tornos Deco 10mm 9 axis machine swiss CNC lathe
Tornos Deco 10mm 9 axis machine swiss CNC lathe
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 9:02 AM
Industry: General Machinery & Equipment
Description: I need a 30" - 60" Tape Wrapper, Looking at Engineering Technology Corp Model #TW30 or #TW-60 Tape Wrapper, or an equal made & model, and any year
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 8:57 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 20, 2026 at 7:43 AM
Industry: General Machinery & Equipment
NEW 2012 Delivered 2013
Only 7000 Hours
Specifications:
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″ Bar Capacity: 6.5″ X Axis Travel: 14.2″ Z Axis Travel: 84.8″ Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Under Power in Houston
Only 7000 Hours
Specifications:
Maximum Swing: 30.3″ Maximum Turning Diameter: 23.2″ Maximum Turning Length: 81.7″ Bar Capacity: 6.5″ X Axis Travel: 14.2″ Z Axis Travel: 84.8″ Spindle Motor: 50 HP Spindle Speed: 1,500 RPM Spindle Nose: A2-15″ Spindle Bore: 7.1″ Turret Positions: 12 Rapid Traverse X: 630 IPM Rapid Traverse Z: 790 IPM Tailstock Quill Diameter: Center 4.7″ / MT #5
Under Power in Houston
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 19, 2026 at 11:35 AM
Industry: General Machinery & Equipment
Gildemeister GM20AC 6 spindle screw machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 19, 2026 at 11:33 AM
Industry: General Machinery & Equipment
Description: DMG Gildemeister Sprint 65 Linear Multi Axis lathe 2006 split over 15k
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 19, 2026 at 9:36 AM
Industry: Processing Equipment
Price: Looking for offer
Description: Fully Functional 2020 BESS Battery Energy Storage System 1.25MW/672kWh
(5) 140kW PowerBRICS - System comprised of: … [Read more...]
(5) 140kW PowerBRICS - System comprised of: … [Read more...]
Enclosure
PCS
Transformer
Auxiliary Transformer
Outdoor Telco Enclosure/ Support Enclosure (OCTE/CSE)
Telco BESS Rack
Auxiliary Panel
Auxiliary AC Disconnect Switch
Fire Protection Panel
Master Fire Alarm Control Units (MFACU)
BESS level Auxiliary panel
PCS
Transformer
Auxiliary Transformer
Outdoor Telco Enclosure/ Support Enclosure (OCTE/CSE)
Telco BESS Rack
Auxiliary Panel
Auxiliary AC Disconnect Switch
Fire Protection Panel
Master Fire Alarm Control Units (MFACU)
BESS level Auxiliary panel
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 19, 2026 at 9:35 AM
Industry: Other Electrical & Power Equipment
Price: Looking for offer
Description: Fully Functional 2020 BESS Battery Energy Storage System 1.25MW/672kWh
(5) 140kW PowerBRICS - System comprised of: … [Read more...]
(5) 140kW PowerBRICS - System comprised of: … [Read more...]
Enclosure
PCS
Transformer
Auxiliary Transformer
Outdoor Telco Enclosure/ Support Enclosure (OCTE/CSE)
Telco BESS Rack
Auxiliary Panel
Auxiliary AC Disconnect Switch
Fire Protection Panel
Master Fire Alarm Control Units (MFACU)
BESS level Auxiliary panel
PCS
Transformer
Auxiliary Transformer
Outdoor Telco Enclosure/ Support Enclosure (OCTE/CSE)
Telco BESS Rack
Auxiliary Panel
Auxiliary AC Disconnect Switch
Fire Protection Panel
Master Fire Alarm Control Units (MFACU)
BESS level Auxiliary panel
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 19, 2026 at 7:45 AM
Industry: Generators & Engines
Description: We want for our overseas customer NEW CAT. generator end pt.no. 320 3715 CAT3512B engine, oilfield use, 600VAC 50HZ 1200KW, need brand new EXSTOCK DELIVERY.
If available please send fotos,price and location asap … [Read more...]
If available please send fotos,price and location asap … [Read more...]
You can offer equivalent capacity and specification generator end like SR4 also.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 4:22 PM
Industry: Transformers
Description: Need this for our italian made machine, trying to find this transformer.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 4:15 PM
Industry: Generators & Engines
Price: 18,000,000
Description: 50 hz LM6000 cogen package (gas turbine generator, HRSG, 2 natural gas booster compressors, + auxiliary systems). 96,000 hours / 500 starts on package. 30,000 hours / 98 starts since last engine replacement. Baseload operation. Maintained by GE under contractual services agreement. 2009 manufacture. 2025 April taken out of service for economic reasons. Borescope inspection reports available. Seller will package and transport equipment to port - buyer to handle shipping.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 3:56 PM
Industry: General Machinery & Equipment
Description: CNC Vertical Turning Center 50-72" Table, Must Have Live Milling
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 2:34 PM
Industry: Generators & Engines
Skid or Trailer mounted
Please send any good options you may have.
thank you
Please send any good options you may have.
thank you
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 2:09 PM
Industry: General Machinery & Equipment
Description: Rottler F69A Cylinder Boring Machine (2021)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 1:35 PM
Industry: Other Electrical & Power Equipment
Price: 175000
Square D Cabinets, QED A81118574, x1 800A, x1 800A main, x1 400A, x1 400A main, all 480/277V
For additional photos, please reach out to the contact info provided.
For additional photos, please reach out to the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 12:43 PM
Industry: General Machinery & Equipment
Description: Need a 1200 Ton x 16-20' Press Brake
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 12:42 PM
Industry: General Machinery & Equipment
Description: Need a plate roll 2-3" x 10'
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 11:41 AM
Industry: Other Electrical & Power Equipment
Description: Panel cover only. Do not need entire box.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 11:29 AM
Industry: General Machinery & Equipment
Price: $29,500.00
Workspace: 48”x36”
Material Processin Area: 1728 sq in
Machine Footprint: 8.5′ x 6′
C02 Power: 100 W
Power Consumption: 1200W
Electrical: 110 V
Engraving Speed: 0-50”/s
Exhaust Size: 6”
Equipped with:
Air Assist
Rotoboss Rotary Tool
Industrial Exhaust Blower
Material Processin Area: 1728 sq in
Machine Footprint: 8.5′ x 6′
C02 Power: 100 W
Power Consumption: 1200W
Electrical: 110 V
Engraving Speed: 0-50”/s
Exhaust Size: 6”
Equipped with:
Air Assist
Rotoboss Rotary Tool
Industrial Exhaust Blower
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 11:28 AM
Industry: General Machinery & Equipment
Description: Looking for a band saw, Must have auto Feed , Hinge Style, 12" Capacity
Budget $20K
Budget $20K
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 11:23 AM
Industry: General Machinery & Equipment
Price: Best offer
• Model: CWS123
• Serial: OV-1308 1685
• Volts: 415
• Phase: 3
• Hz: 50
• Amps: 78
• Width/Turntable (in): 26
• Turntable Motor: 1/15 HP
• Working Height (in): 42
• Load Capacity (lbs): 800
• Wash Tank Cap. (USG): 70
• Wash Pump Capacity: 90 GPM @ 50 PSI
• Wash Nozzle Quantity: 12
• Rinse &RP Nozzle Quantity: 8
• Blow-off Nozzle Quantity: 8
• Wash Pump Motor: 5 HP
• Electric Wash Tank Heater: 12 kW
•
• Serial: OV-1308 1685
• Volts: 415
• Phase: 3
• Hz: 50
• Amps: 78
• Width/Turntable (in): 26
• Turntable Motor: 1/15 HP
• Working Height (in): 42
• Load Capacity (lbs): 800
• Wash Tank Cap. (USG): 70
• Wash Pump Capacity: 90 GPM @ 50 PSI
• Wash Nozzle Quantity: 12
• Rinse &RP Nozzle Quantity: 8
• Blow-off Nozzle Quantity: 8
• Wash Pump Motor: 5 HP
• Electric Wash Tank Heater: 12 kW
•
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 11:03 AM
Industry: General Machinery & Equipment
Price: 9900
Description: Kitamura Mycenter 2XiF CNC Vertical Machining Center
Year: 200, Control: Fanuc 16iM, Travels: 20" x 14" x 18", Pallet Changer, 60 ATC, 20,000 RPM
Year: 200, Control: Fanuc 16iM, Travels: 20" x 14" x 18", Pallet Changer, 60 ATC, 20,000 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 10:58 AM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 10:39 AM
Industry: General Machinery & Equipment
Description: TANAKA laser with two cutting heads (4000 & 6000 watt) and 11' X 100' table, new 2005, IP/UP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 10:21 AM
Industry: Transformers
Price: Best offer
Description: Transformer 15 KVA /240/480 to 240/120 single phase Hammond located Western PA
subject to prior sale.
subject to prior sale.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 10:00 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: 2007 BARELY USED Kent Industrial TW-40QI CNC Bed Milling Machine
S/N 9611369 … [Read more...]
S/N 9611369 … [Read more...]
Located in Illinois, photos available, looking for offer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 9:46 AM
Industry: Circuit Breakers
Description: Quantity 1 ITE K600 Red 4 high cell structure for E/O breakers prefer all 4 stationary disconnects per cell and vertical bus but can deal with it if there are variations send some pics
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 9:24 AM
Industry: Generators & Engines
Description: 200kw John Deere diesel, open unit - 133 total hours since new
300kw Cummins diesel, open unit - 105 total hours since new … [Read more...]
300kw Cummins diesel, open unit - 105 total hours since new … [Read more...]
150kw Kohler Nat gas, enclosed - 1062 total hours since new
150kw Cummin s Nat gas, enclosed - Less than 500 total hours since new
250kw Onan diesel, enclosed - 555 total hours since new
Your net $38,000 for ALL five units - fob Connecticut - Sell will load onto buyers transport
150kw Cummin s Nat gas, enclosed - Less than 500 total hours since new
250kw Onan diesel, enclosed - 555 total hours since new
Your net $38,000 for ALL five units - fob Connecticut - Sell will load onto buyers transport
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 7:46 AM
Industry: General Machinery & Equipment
Description: Amada HDS2204NTW CNC Hydraulic Press Brake (2012)
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System, Will Bend 1" Material
240 Ton X 14', Flush Floor, Bend up to 1" Material, Robotic Loader, Available Astro 165W NT Robotic Bending System, Will Bend 1" Material
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 17, 2026 at 7:28 AM
Industry: General Machinery & Equipment
Distance Between Housings: 124"
Stroke (Y‑Axis Travel): 12.20"
Open Height: 24"
Approach Speed: 295 IPM
Working / Pressing Speed: 24 IPM
Return Speed: 295 IPM
Prima Power Open Control CNC System
Backgauge: 4‑Axis CNC (X, R, Z1, Z2)
Servo‑electric (no hydraulics)
Angle Control: LazerSafe IRIS / IRIS Plus
Auto CNC Crowning
Wila‑style upper and lower tool clamping
Safety: Full front guarding with polycarbonate safety
Stroke (Y‑Axis Travel): 12.20"
Open Height: 24"
Approach Speed: 295 IPM
Working / Pressing Speed: 24 IPM
Return Speed: 295 IPM
Prima Power Open Control CNC System
Backgauge: 4‑Axis CNC (X, R, Z1, Z2)
Servo‑electric (no hydraulics)
Angle Control: LazerSafe IRIS / IRIS Plus
Auto CNC Crowning
Wila‑style upper and lower tool clamping
Safety: Full front guarding with polycarbonate safety
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
