Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: June 3, 2026 at 2:13 PM
Industry: Circuit Breakers
Description: EH3B125 used must be original not recon
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:45 PM
Industry: Transformers
Description: Looking for the following that is readily available on ground.
2x 2500kVA 13.8kV - 600V Transformers
2x 2500kVA 13.8kV - 600V Transformers
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:38 PM
Industry: Motors - A.C. & D.C.
Description: SIEMENS, or equivalent, 700HP 3566 508S DP BB 460V Type CG for compressor
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:31 PM
Industry: General Machinery & Equipment
Price: 145000
Bar capacity: 7.3″
Maximum turning diameter: 22.83″
Maximum turning length: 38.54″
Machine travels (x z): 12.2″ x 42.12″
Maximum spindle speed: 2,000 RPM
Spindle nose: A2-15
Spindle motor: 50HP
Turret configuration: 12 Tools Bidirectional
Machine dimensions: 159″ x 90″
Machine weight: 20,420 lbs
Electrical requirements: 220V/3Phz/60Hz/27kVA
Equipped with:
18″ 3-Jaw Hydraulic Thru-Hole Chuck
Front SMW Autoblok Air Chuck BB-N-470-191-3
12D/24 Posi
Maximum turning diameter: 22.83″
Maximum turning length: 38.54″
Machine travels (x z): 12.2″ x 42.12″
Maximum spindle speed: 2,000 RPM
Spindle nose: A2-15
Spindle motor: 50HP
Turret configuration: 12 Tools Bidirectional
Machine dimensions: 159″ x 90″
Machine weight: 20,420 lbs
Electrical requirements: 220V/3Phz/60Hz/27kVA
Equipped with:
18″ 3-Jaw Hydraulic Thru-Hole Chuck
Front SMW Autoblok Air Chuck BB-N-470-191-3
12D/24 Posi
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:29 PM
Industry: General Machinery & Equipment
Description: NEW DMTC 20" x 40" Model DVS855T CNC Vertical Machining Center
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:15 PM
Industry: General Machinery & Equipment
Price: best offer
Description: HAVE 2 40' SHIPPING CONTAINERS IN NICE SHAPE IN THE MIDWEST. THEY WERE USED FOR STORAGE. BOTH WERE NEW IN 2003 AND APPEAR TO BE IN NICE SHAPE. HAVE MORE PHOTOS.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:13 PM
Industry: Other Electrical & Power Equipment
Description: Vista #615 (1X), Vista #321 (2X) Underground distribution, Switchgear NEW
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 1:01 PM
Industry: Transformers
480V 24.1 AMPS / 208V 55.5 AMPS OUTPUT
SEE THE ATTACHED NAMEPLATE
SEE THE ATTACHED NAMEPLATE
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 12:59 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 12:33 PM
Industry: General Machinery & Equipment
Description: Ermaksan EVO III 3100-100 (10' x 110 tons minimum)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 12:19 PM
Industry: General Machinery & Equipment
Description: capable of drilling up to 1-3/8" holes, power down feed, left-right adjustment.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 12:17 PM
Industry: Generators & Engines
Price: 28,000
Control pqanel
Circuit breaker
Fuel tank base (double wall 1426 Gal.)
Radiator cooled
Sound attenuated enclosure
Model No. MB0750
Serial number: 2089501
2006 model year
Last serviced: At 570 hours
3/20/2026
Approximately 575 total hours since new
Dealer net $28,000
FOB Jacksonville FL
Circuit breaker
Fuel tank base (double wall 1426 Gal.)
Radiator cooled
Sound attenuated enclosure
Model No. MB0750
Serial number: 2089501
2006 model year
Last serviced: At 570 hours
3/20/2026
Approximately 575 total hours since new
Dealer net $28,000
FOB Jacksonville FL
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 11:28 AM
Industry: Generators & Engines
Price: $339,500.00
Description: Caterpillar Model 3512TA Mounted in 2022 into Fully Customized 40’ ISO Sound Attenuated Container on Tandem Axle Chassis, Premium Deep Sea DSE8610 Auto Paralleling Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT Generator, Shunt Trip Circuit Breaker, Camlock Distro, Elec.Governor, Standard Duty Air Cleaners, 24V Starter, 45 Amp Alternator, Battery Set, DW Fuel Tank, Radiator.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 10:47 AM
Industry: Transformers
Budget: Over $100,000
Description: Dry or Oil type
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:56 AM
Industry: General Machinery & Equipment
Description: Schechtl CNC folder & shear both 10’ x 16 ga. Shear with rear sheet supports and front return on sheared parts
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:54 AM
Industry: General Machinery & Equipment
Description: 10’ x 14 ga box & pan hand brake with 6” depth of box, new or used
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:53 AM
Industry: General Machinery & Equipment
Description: 10' x 1/2" - 3/4" plate rolls with 5" angle roller on outside stubs. Rolling 10' x 1/2" mild steel. May need heavier rolls as looking to prebend the entry and exit on the sheet. Will also consider separate section bending rolls for 5x5 x 5/8" angle, leg in and leg out.
prefer used, will look at new as well
prefer used, will look at new as well
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:47 AM
Industry: General Machinery & Equipment
Description: Okuma 2SP-V40 Twin Spindle Vertical Turning Center
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:32 AM
Industry: General Machinery & Equipment
Description: 1250mm WMW Modul ZFWZ 1250/3 Vertical Gear Hobber. Well Tooled. U/P
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:28 AM
Industry: General Machinery & Equipment
Description: 1600mm TOS FO16 Vertical Gear Hobber. Well Equipped. U/P
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 9:06 AM
Industry: General Machinery & Equipment
Price: 23,500.00 or best offer
Description: Canton 30A Alligator Shear (no shearline included). This machine is great for rebar and scrap metal cutting.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 8:34 AM
Industry: General Machinery & Equipment
Price: 14500
Description: SERIAL .......................... 1024-2
MODEL ........................... CPR-DE-PO-8024 … [Read more...]
MODEL ........................... CPR-DE-PO-8024 … [Read more...]
CAPACITY ........................ 8,000 LBS PER SIDE
COIL WIDTH ...................... 24"
COIL ID ......................... 18" TO 21"
ID ADJUSTMENT ................... MANUAL
COIL OD ......................... 72"
BACKER PLATE .................... 60"
PULL OFF ........................ NON MOTORIZED
COIL WIDTH ...................... 24"
COIL ID ......................... 18" TO 21"
ID ADJUSTMENT ................... MANUAL
COIL OD ......................... 72"
BACKER PLATE .................... 60"
PULL OFF ........................ NON MOTORIZED
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 8:32 AM
Industry: Circuit Breakers
Description: Looking for 6- GE THQD32100 3 pole 100 amp recons OK
Quote what you have
Quote what you have
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 7:58 AM
Industry: Other Electrical & Power Equipment
Price: best offer
Condition: used
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 3, 2026 at 7:37 AM
Industry: General Machinery & Equipment
Description: Amada, Prima, HAAS, Liberty, HGG, Bridgeport, Piranha, Motoman, Trump, Lissmac and so much more at Auction!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 8:57 PM
Industry: General Machinery & Equipment
Description: HAAS VF-9 CNC VMC, 2010 OR NEWER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 8:56 PM
Industry: General Machinery & Equipment
Description: HAAS VF-9 CNC VMC, 2010 OR NEWER
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 8:08 PM
Industry: Circuit Breakers
Description: TQD32100 & TJ236200 nice Recon
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 7:24 PM
Industry: General Machinery & Equipment
Budget: $50,001 - $100,000
1. Mori Seiki (NV5000, NVX, or DuraCenter series).
2. Doosan / DN Solutions (DNM 400, 500, or 5700 series).
Requirements:
- 40 Taper spindle (prefer 10k-12k+ RPM if available).
- Must be under power for inspection or have a video of it running under power.
- Budget range: $25,000 - $45,000 depending on year/condition.
Location: Asheville, NC. Willing to travel in Southeast US
2. Doosan / DN Solutions (DNM 400, 500, or 5700 series).
Requirements:
- 40 Taper spindle (prefer 10k-12k+ RPM if available).
- Must be under power for inspection or have a video of it running under power.
- Budget range: $25,000 - $45,000 depending on year/condition.
Location: Asheville, NC. Willing to travel in Southeast US
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 5:39 PM
Industry: General Machinery & Equipment
Description: 10' x 1/2" plate rolls with 5" angle roller on outside stubs. Rolling 10' x 1/2" mild steel. May need heavier rolls as looking to prebend the entry and exit on the sheet. Will also consider seperate section bending rolls for 5x5 x 5/8" angle, leg in and leg out.
prefer used, will look at new as well
prefer used, will look at new as well
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 3:38 PM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 3:37 PM
Industry: General Machinery & Equipment
Description: Looking for Horizontal Ram Baler for Al/Cu rads
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 2:57 PM
Industry: Other Electrical & Power Equipment
Price: 600
Description: I have NIB 30a 100a 200a fusible disconnect switch
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 2:51 PM
Industry: General Machinery & Equipment
Budget: Up to $5,000
Description: Looking for Elumatec tool holders ER 32 chuck-----Elumatec part number 136 350 817
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 2:43 PM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: 3512 MUI Locomotive Engine cores - 49Y prefix.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 2:33 PM
Industry: General Machinery & Equipment
Price: 9950
THICKNESS ..... 24"
COLOR ......... BLACK AND GREY
COLOR ......... BLACK AND GREY
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 2:18 PM
Industry: General Machinery & Equipment
Price: 40,000.00 or best offer
Description: Automated DMI Shearline for sale 60' double - sided with 4 bays on each side of run out.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:57 PM
Industry: Circuit Breakers
Description: Looking for qty (2) 75H-3 E/O, D/O 3000A frame - any control voltage, no trip unit needed
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:48 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:48 PM
Industry: General Machinery & Equipment
Price: 22,500.00 or best offer
Description: #18 Rebar Bender by DMI-ARNOLD with Controller
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:48 PM
Industry: General Machinery & Equipment
Description: Must be good quality
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:47 PM
Industry: General Machinery & Equipment
Description: Looking for any 32mm CNC Swiss lathe, preferably Star or Tsugami in the 50K range. if your machine is a bit more let me know.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:47 PM
Industry: General Machinery & Equipment
Mfd. 2019
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:43 PM
Industry: General Machinery & Equipment
IEMCA SIR Loader
Knoll System
Knoll System
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:42 PM
Industry: General Machinery & Equipment
1,000 Hrs.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:35 PM
Industry: General Machinery & Equipment
Description: 2D Kearney & Trecker Vertical Rotary Head Mill
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:03 PM
Industry: General Machinery & Equipment
Description: I am looking for a Hydraulic press brake that has a 16 foot bed and at least 100 Ton.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:00 PM
Industry: Generators & Engines
Description: For pricing and additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 12:53 PM
Industry: General Machinery & Equipment
Description: We are looking for 12 CRAH Units as per below:
Total airflow: 30,000 CFM @ 0.5”wc (non-ducted) or close to 1” … [Read more...]
Total airflow: 30,000 CFM @ 0.5”wc (non-ducted) or close to 1” … [Read more...]
Chilled Water: 44F supply
Entering air temp: 80F/67
Supply Air Temperature: 55F/54F
Quantity: 12
Unit configuration – Need to put the units against a wall. Access panels and control panels need to be either on the side of the units or the front.
Units will be sitting on a raised floor. Supply air will be down into the raise floor, and room return (not via drop
Entering air temp: 80F/67
Supply Air Temperature: 55F/54F
Quantity: 12
Unit configuration – Need to put the units against a wall. Access panels and control panels need to be either on the side of the units or the front.
Units will be sitting on a raised floor. Supply air will be down into the raise floor, and room return (not via drop
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 12:51 PM
Industry: Motors - A.C. & D.C.
75-90:1 Ratio
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 12:05 PM
Industry: Generators & Engines
Price: Call or Email for price.
Description: Waukesha 12V-AT27GL Natural Gas Generator Set – Rated at 2,100KW EACH, 4160V, 60Hz, 900RPM – 5 Available totaling to 10,500KW. Years ranging from 1995-2000.
Condition: SOLD AS HIGH HOUR RUNNERS.
Condition: SOLD AS HIGH HOUR RUNNERS.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 11:28 AM
Industry: Generators & Engines
Price: $329,500.00
Description: Caterpillar Model 3512TA Mounted in 2021 into Fully Customized 40’ ISO Sound Attenuated Container on Tandem Axle Chassis, Premium Deep Sea DSE8610 Auto Paralleling Control Panel, Auto Start / Stop, Engine Safety Shutdowns, CAT Generator, Shunt Trip Circuit Breaker, Camlock Distro, Elec.Governor, Standard Duty Air Cleaners, 24V Starter, 45 Amp Alternator, Battery Set, DW Fuel Tank, Radiator.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 11:25 AM
Industry: Circuit Breakers
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 10:59 AM
Industry: General Machinery & Equipment
Description: Haeger Model 824 One Touch 1H Fastener Insertion Machine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 10:56 AM
Industry: General Machinery & Equipment
Description: Okuma LU35-2SC/850, 29" x 36" Turning Center, 2 Tool Turrets, Chip Conveyor, 18" 3-Jaw Rohn Geared Chuck, 3200 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 10:52 AM
Industry: Other Electrical & Power Equipment
Description: SIEMENS ONLY- 600A 480/277V MAIN LUG ONLY NEMA 1 MAX BREAKER 100A
42 AND UP CIRCUITS … [Read more...]
42 AND UP CIRCUITS … [Read more...]
TAKES BL, BQD, ED, GB BREAKERS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 10:50 AM
Industry: General Machinery & Equipment
Description: Kitamura MyTrunion 5 Axis Machining Center, 24" Round Table, 20,000 RPM, Fanuc 310i CNC, 50 ATC, Very Low Cutting Hours, New 2017
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:55 AM
Industry: Other Electrical & Power Equipment
Description: Looking for new in stock, ready to ship K LINE produces as per below.
6 - KL115ASH25 --- TRANSMISSION LINE POST INSULATOR, GAIN BASE G, HORIZONTAL TRUNNION LINE END FITTING … [Read more...]
6 - KL115ASH25 --- TRANSMISSION LINE POST INSULATOR, GAIN BASE G, HORIZONTAL TRUNNION LINE END FITTING … [Read more...]
8 - KL115HBS25 --- TRANSMISSON DEADEND INSULATOR 27000LBS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:46 AM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: REQUEST FOR INFORMATION — USED CNC PRESS BRAKE
90–100 Ton Class, 10-Foot Bed, with Tooling — Multi-Material Fabrication APPLICATION & MATERIALS … [Read more...]
90–100 Ton Class, 10-Foot Bed, with Tooling — Multi-Material Fabrication APPLICATION & MATERIALS … [Read more...]
Primary use: bending aluminum plate and sheet. Most common job: 5052-H32 aluminum, 0.250" (1/4") thick, up to 96" bend length, with a 0.750" (3/4") inside radius for non-structural bumpers and brackets. CNC control: Graphical / monitor-based CNC backgauge control preferred. Examples that we consider a good fit: Cincinnati Autoform PC, Amada NC9-EX II,
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:39 AM
Industry: General Machinery & Equipment
Price: $10,000 or best offer
Description: Must Move ASAP - 2006 AMADA FO-3015NT CO₂ Flying Optics Laser
Amada 4kW Fanuc C4000i Laser … [Read more...]
Amada 4kW Fanuc C4000i Laser … [Read more...]
Cutting Capacity:
Sheet Capacity: 5' × 10'
Max Sheet Size: 61" × 122.8"
Max Sheet Weight: 1,875 lbs
Wattage: 4,000 W (Fanuc C4000i resonator)
Axis Travels:
X‑Axis: 122.8"
Y‑Axis: 61"
Z‑Axis: 7.87" (7.8")
Performance:
Max Rapid Traverse: 3,150 IPM
Laser Type: Flying Optics
Control: AMNC‑F CNC
Table System:
Table Type: Dual Shuttle / Dual Pallet
Sheet‑W: 60"
Sheet‑L: 120"
Sheet Capacity: 5' × 10'
Max Sheet Size: 61" × 122.8"
Max Sheet Weight: 1,875 lbs
Wattage: 4,000 W (Fanuc C4000i resonator)
Axis Travels:
X‑Axis: 122.8"
Y‑Axis: 61"
Z‑Axis: 7.87" (7.8")
Performance:
Max Rapid Traverse: 3,150 IPM
Laser Type: Flying Optics
Control: AMNC‑F CNC
Table System:
Table Type: Dual Shuttle / Dual Pallet
Sheet‑W: 60"
Sheet‑L: 120"
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:26 AM
Industry: General Machinery & Equipment
Price: Looking for offer
Description: TURNKEY Fully Integrated Schneider BESS Battery Energy Storage System 1.25MW - Commercial ESS
Capacity: 1.2 MW C&I BESS … [Read more...]
Capacity: 1.2 MW C&I BESS … [Read more...]
Architecture: Fully integrated (battery + controls + distribution)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Photos, specs available upon request.
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Photos, specs available upon request.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:25 AM
Industry: Other Electrical & Power Equipment
Price: Looking for offer
Description: TURNKEY Fully Integrated Schneider BESS Battery Energy Storage System 1.25MW - Commercial ESS
Capacity: 1.2 MW C&I BESS … [Read more...]
Capacity: 1.2 MW C&I BESS … [Read more...]
Architecture: Fully integrated (battery + controls + distribution)
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Photos, specs available upon request.
Voltage: 480VAC system with internal distribution
Controls: PLC-based with data logging + network topology
Enclosure: NEMA 3R / NEMA 4 rated outdoor system
Configuration: Multi-container (battery + control units)
Transformer Included (145 kVA auxiliary system)
Photos, specs available upon request.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 9:23 AM
Industry: General Machinery & Equipment
Description: Seeking machine with (4) blast wheels (approx. 25 HP each), top gravity-feed hopper, air-operated gate valves, standalone dust collector, self-recovering/self-cleaning abrasive recovery system, blast chamber, vacuum chamber and blow-off chamber. Capacity approx. 40" H x 36" W, up to 500 lbs./ft. 460V, 3-phase, approx. 200A service, 120 PSI air. Please provide specs, photos, location, condition and asking price.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 7:56 AM
Industry: General Machinery & Equipment
Description: King Vertical Boring Mill, 62" Table, 70" Swing, Three Heads, under power
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 7:55 AM
Industry: General Machinery & Equipment
Description: Geminis Engine Lathje Model 1400, 62" Swing, x 320" centers, steady rests
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 7:52 AM
Industry: General Machinery & Equipment
Description: Immediate Purchjase 4" CNC Table Type Horizontal Boring Mill, no ATC required, Soliod Base machine no outriggers
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 2, 2026 at 1:19 AM
Industry: General Machinery & Equipment
Description: Fadal VMC 6535/50 - Fanuc CNC Control, 7500 RPM, CAT-50 Spindle, 32 Side Mount ATC, and Chip Conveyor, New 2006
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:24 PM
Industry: Other Electrical & Power Equipment
Description: I am looking to purchase around 3,000’ of used 2/0 three phase power cable
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 7:13 PM
Industry: General Machinery & Equipment
Description: Punch Press, 300 to 500 Ton, 5" Stroke, 22" Shut Height, 4" of Adjustment, 40 SPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 7:11 PM
Industry: General Machinery & Equipment
Description: Punch Press, 300 to 500 Ton, 5" Stroke, 22" Shut Height, 4" of Adjustment, 40 SPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 6:36 PM
Industry: General Machinery & Equipment
Description: Need a nice, late model Hydmech S20A
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 4:26 PM
Industry: General Machinery & Equipment
Description: 12'x1/2" hydraulic shear, must be nice, prefer Rocky Mtn region
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 3:27 PM
Industry: General Machinery & Equipment
Description:
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 2:57 PM
Industry: General Machinery & Equipment
Description: Blansko SK-50A Dual Column CNC Vertical Boring Mill, 187” Table, 228” Swing, 120” Under Rail, Side Head, Siemens CNC
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 2:06 PM
Industry: General Machinery & Equipment
Description: DTI Hogger II, Table Dia. 100", Swing 112", Work Ht-U/R 35", 2 Ram Heads, 160 hp, 180 RPM, Fanuc 18-iT, 60 ATC, Full Enclosure, Chip Conveyor, High Pressure Coolant,
New 2007
New 2007
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 12:08 PM
Industry: Generators & Engines
Price: $195,500.00
Description: Caterpillar Model 3508B Rebuilt by Ring Power Package Diesel Generator Set, CAT Premium EMCP II Generator Control Panel, Auto Start / Stop, Engine Safety Shutdowns, Reconditioned CAT 1250KW Oversized SR4B 2-Bearing 695 Frame 12 Lead Generator, Permanent Magnet, 3 Pole 2000 Amp Breaker, Electronic Governor, Prime Power Fuel & Oil Filtration, Standard Duty Air Cleaners, 24V Starter, 35A Alternator, Radiator,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:42 AM
Industry: Generators & Engines
Price: 32,500.00
Description: Come and get it!!!
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:27 AM
Industry: Processing Equipment
Description: OLSA or similar mixer 8 to 10 Liter Capacity
Must have counter-rotating agitators and High Shear Rotor-Atator device … [Read more...]
Must have counter-rotating agitators and High Shear Rotor-Atator device … [Read more...]
Must be from a sanitary application
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:24 AM
Industry: General Machinery & Equipment
Description: Bridgeport GX480 CNC Vertical Machining Center, 18.9" x 15.75" x 16.9" Travels, 10,000 RPM Spindle Speed, 40 Taper, 20 ATC. Fanuc Oi-MC Control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:24 AM
Industry: Processing Equipment
Description: Ross Versamix model PVM-4 gallons or VMC-4 Gallons
For a sanitary application.
For a sanitary application.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:22 AM
Industry: General Machinery & Equipment
Description: Ursviken OPTIFLEX 200 Press Brake, Width Between Uprights: 3100 mm, Overall Machine Width: 4310 mm, Overall Machine Depth: 2300 mm, Machine Height: 3325 mm, Daylight: 550 mm, Table Width: 100/200 mm, Height from floor to top of bed 900 mm, Stroke Length: 400 mm
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 11:20 AM
Industry: General Machinery & Equipment
Description: Cincinnati 440 Ton Press Brake, Auto Back Gauge, Width: 16' , 460V 3 phase 50 Htz
Recessed in pit 4', Available June 17, 2026
Recessed in pit 4', Available June 17, 2026
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 10:59 AM
Industry: General Machinery & Equipment
Description: Bystronic XACT Smart 160/3100
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 9:55 AM
Industry: General Machinery & Equipment
Description: 1260mm (50") x 5000mm (16') Waldrich Siegen V/SIIb35 x 5000
Roll Grinder, Crowning/Cambering, WP Wgt 70,000 Lbs
Roll Grinder, Crowning/Cambering, WP Wgt 70,000 Lbs
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 9:20 AM
Industry: General Machinery & Equipment
Description: Okuma Captain or Crown 2-Axis CNC Lathe, 8-10" Chuck
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 9:19 AM
Industry: General Machinery & Equipment
Description: 32" Capacity Horizontal Band Saw - Mitering Not Needed, Amada or Hyd-Mech
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: June 1, 2026 at 9:08 AM
Industry: Generators & Engines
Description: I am looking for a new, new surplus, rebuilt, or RTO C11 Industrial Engine 262-4153, SN Pre: RSX
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 31, 2026 at 9:15 AM
Industry: Other Electrical & Power Equipment
Description: In need of a CF252580ST OR CF252510ST for horizontal installation for a condo building in Pensacola Beach Florida. All 63 units are currently down.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 30, 2026 at 4:39 PM
Industry: Circuit Breakers
Description: Please quote me price and availability on Square D I-line 2P 125A 250V 10K Min AIC Breakers.
● Need up to (40) Pieces of each phase combination. AB, AC, BC. … [Read more...]
● Need up to (40) Pieces of each phase combination. AB, AC, BC. … [Read more...]
● Can be new or recon breakers.
● Can be the newest style or the older gray label style.
● No black face.
● Please quote me what you have in stock.
● Please specify if you are quoting new or refurbished material.
● Can be the newest style or the older gray label style.
● No black face.
● Please quote me what you have in stock.
● Please specify if you are quoting new or refurbished material.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 30, 2026 at 4:20 PM
Industry: Other Electrical & Power Equipment
Description: Please quote me price and availability on a 400A 480/600V 3Ph 4W, Nema 1, Non-Fused, Manual Transfer Switch. Any manufacturer, new or fully reconditioned.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 8:21 PM
Industry: General Machinery & Equipment
Description: 5" or 6" CNC Tube Bender
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 3:40 PM
Industry: General Machinery & Equipment
Description: MITSUBISHI MVR40 5 Axis 5 Face Machining Center
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 3:39 PM
Industry: General Machinery & Equipment
Description: Hauser S40-400 CNC Jig Grinder
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 3:33 PM
Industry: General Machinery & Equipment
Description: Hauser S40-400 CNC Jig Grinder
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 2:20 PM
Industry: General Machinery & Equipment
Description: Need ACME GRIDLEY 1-5/8" RB-8 Multi-Spindle Screw Machine
Must be in decent shape. Let us know about any others in good shape.
Must be in decent shape. Let us know about any others in good shape.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 1:51 PM
Industry: General Machinery & Equipment
Description: MVD 6Kw Laser, 5' x 10', Dual Pallet Shuttle Table, Dust Collector, Nesting Software, Camera Cutting Monitoring, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 1:26 PM
Industry: General Machinery & Equipment
Description: Wanted...Used Steady Rest for a Victor (Taichung) 1660G Engine Lathe; Also looking for a used taper attachment for a Victor 1660G Engine Lathe
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 12:40 PM
Industry: General Machinery & Equipment
Description: Horizontal band saw to cut beams up to 44" wide, prefer late-model machine in excellent condition and available for inspection under power
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 12:21 PM
Industry: General Machinery & Equipment
Description: Amada EM or AE Turret Punch (EM-2510, AE-2510, AE-255, AC-255)(in plant under power pref.)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 29, 2026 at 12:20 PM
Industry: Generators & Engines
Description: 2005 - Cummins 250kw Nat Gas, Weather enclosed -580 hour- $29,500.00- FOB Colorado
1990- CAT 3516 1250KW Continuous duty 480 volt -$55,000.00- Ventura CA … [Read more...]
1990- CAT 3516 1250KW Continuous duty 480 volt -$55,000.00- Ventura CA … [Read more...]
2021- Sullair Compressor -1250 hour- Tier 4 Final -Make offer -Canyon country
400KW Cummins open skidded-480 Volt Make offer good runner Canyon Country
400KW Cummins open skidded-480 Volt Make offer good runner Canyon Country
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
