Trusted Since 1924
The World's Leading Online Marketplace for Used, New, and Surplus Industrial Machinery & Equipment ℠
Browse Wanteds & For Sales
Posted: May 2, 2026 at 10:15 AM
Industry: General Machinery & Equipment
suitable for transformer core lamination
Width : 250 to 400 mm
Width : 250 to 400 mm
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 4:06 PM
Industry: Transformers
Description: Looking for 2x 2500kVA Transformers 13.8kV - 600V
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 3:48 PM
Industry: General Machinery & Equipment
Description: Brake - 5' TDF or TDC Type Brake
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 1:35 PM
Industry: Transformers
Description: There is a contractor in Tucson AZ that has an emergency, they are looking for 1 Universal Buhsing well 15/25 kV padmount transformer (and or just the copper stud out of it).....Would take 3 if available for Saturday air freighted to them in Tucson.
Please contact is you have any.and we will pout you directly in touch with them
Please contact is you have any.and we will pout you directly in touch with them
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 1:23 PM
Industry: Generators & Engines
Budget: Over $100,000
Description: Need two 1MW nat gas generator sets. 4160V ok. 480V preferred. Complete with controls, breaker, radiator... open skid ok.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 1:22 PM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: We are looking to purchase a portable generator that has a minimum requirement of 200 kW. We would like this unit to be a mobile unit however we could put on a trailer if the unit is not currently setup to be a mobile unit. We are looking to purchase a unit as soon as we find what we are looking for.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 1:09 PM
Industry: General Machinery & Equipment
Machine is in excellent condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 1:03 PM
Industry: Other Electrical & Power Equipment
Budget: Over $100,000
Description: walk in oven
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 12:02 PM
Industry: General Machinery & Equipment
Description: Need a 15" x 50" Clausing colchester engine lathe
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 11:40 AM
Industry: Circuit Breakers
Description: Qty 1 Schneider NW30H 3000 amp Master Pact breaker WG3HHT44A9SCBBXXXXY016
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 11:18 AM
Industry: General Machinery & Equipment
Price: BEST OFFER
Z-axis travel: 762 mm (30 in)
Table size: 2,134 × 737 mm (84 × 29 in)
Table load capacity: 2,268 kg (5,000 lb)
T-slots: 7 slots, 80 mm (3.15 in) center distance
Taper: CT50 / BT50
Max spindle speed: 7,500 RPM
Motor power: 22.4 kW (30 hp)
Torque: 460 Nm (340 ft-lbf) @ 700 RPM
Drive: 2-speed gearbox
Cooling: Liquid-cooled
Thrust loads: X = 3,400 lb, Y = 4,100
Table size: 2,134 × 737 mm (84 × 29 in)
Table load capacity: 2,268 kg (5,000 lb)
T-slots: 7 slots, 80 mm (3.15 in) center distance
Taper: CT50 / BT50
Max spindle speed: 7,500 RPM
Motor power: 22.4 kW (30 hp)
Torque: 460 Nm (340 ft-lbf) @ 700 RPM
Drive: 2-speed gearbox
Cooling: Liquid-cooled
Thrust loads: X = 3,400 lb, Y = 4,100
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 10:51 AM
Industry: Generators & Engines
Description: Looking for a 40' 3-x trailer/ chassis for a CAT 2MW XQ2000 with CLEAN TITLE , new, or used in good condition ASAP Please , any state would work
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 10:28 AM
Industry: Other Electrical & Power Equipment
Description: Looking to see if anyone has elbow arresters that are 35KV 200A rated 36/29KV MCOV (purple cuff), like the EATON part 3238020C36M or can be another make that is equivalent in spec. Possibly need 45 units in the next month or two, another option is a 48/39 KV MCOV rated ones too.
Let me know what you have, I know this is a stretch to ask.
Let me know what you have, I know this is a stretch to ask.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 10:17 AM
Industry: Generators & Engines
Description: Need QTY 25 of 25kW Prime Diesel 480V units Skid or on Trailer (can be a mix of both)
New OR Low hour units (no more than 3K hours).
New OR Low hour units (no more than 3K hours).
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: May 1, 2026 at 7:16 AM
Industry: Other Electrical & Power Equipment
Description: UP TO 500FT SQUARE D BUS DUCT ONLY. 4W ALUMINUM OR COPPER 800AMP, 1000AMP OR 1200AMP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 6:16 PM
Industry: Transformers
Description: We have a installing contactor looking for a 15 kV 200 A LB insert feed through adapter for a padmount transformer to thread into a universal well
1 only needed in Arizona
1 only needed in Arizona
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 4:53 PM
Industry: Transformers
Price: Best Offer
Description: Specifications (all 4 units):
New surplus, never energized, manufactured January 2018 … [Read more...]
New surplus, never energized, manufactured January 2018 … [Read more...]
300 kVA, 3-phase, 60 Hz
34.5 kV Delta primary / 480V Delta secondary
3.9% impedance, 65°C rise, +60°C ambient rated
150 kV BIL HV / 30 kV BIL LV
Aluminum windings
Mineral oil, certified <2 PPM PCB at manufacture
ONAN cooling
UL listed, DOE compliant
Manufacturer: Howard Industries
34.5 kV Delta primary / 480V Delta secondary
3.9% impedance, 65°C rise, +60°C ambient rated
150 kV BIL HV / 30 kV BIL LV
Aluminum windings
Mineral oil, certified <2 PPM PCB at manufacture
ONAN cooling
UL listed, DOE compliant
Manufacturer: Howard Industries
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 4:20 PM
Industry: General Machinery & Equipment
Description: I have a customer looking for a 37" Dry Timesaver with Dust Collector. West Coast preferred.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 4:01 PM
Industry: General Machinery & Equipment
Price: $18,000
Description: Sell from shop floor, under power.
2007 Doosan Lynx 220 CNC lathe, with bar feed. … [Read more...]
2007 Doosan Lynx 220 CNC lathe, with bar feed. … [Read more...]
8" Chuck, tail stock, Fanuc OT Control, bar feed included.
$18,000 Plus rigging/ freight.
Photos soon.
$18,000 Plus rigging/ freight.
Photos soon.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 3:27 PM
Industry: Circuit Breakers
Description: 5kv 600a, vacuum circuit breaker, draw out,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 3:07 PM
Industry: Transformers
Budget: $50,001 - $100,000
Description: 1.5 MVA (1,500 kVA) dry type unit substation transformer, copper windings, standard protection features, 6,900V to 480Y/277V.
To be delivered within 90 days in Ohio US
To be delivered within 90 days in Ohio US
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:54 PM
Industry: General Machinery & Equipment
Description: 2010 or newer. Also looking for other Chiron mill turns and Willemin mill turns
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:53 PM
Industry: General Machinery & Equipment
Description: Also looking for MS16, MS22, MS40, MS52
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:52 PM
Industry: General Machinery & Equipment
6 Spindles
1" Capacity
Motor and Controls
Stock Stand and Reel
Chip Conveyor
Universal Threading
Configured as pictured
Recently Reconditioned
1" Capacity
Motor and Controls
Stock Stand and Reel
Chip Conveyor
Universal Threading
Configured as pictured
Recently Reconditioned
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:51 PM
Industry: General Machinery & Equipment
Control: Siemens 840C
Capacity 65mm
Ran oil
Still in production, running nylon
With 12-ft Bar Feed (pictured)
Chip Conveyor
Comes the a good amount of tooling
Control Type: Siemens SINUMERIK 840C
Spindle Speed (max.): 6,000 RPM
Power Requirements (V/Hz/PH): 400/60/3
Main Spindle
Speed (max.): 6,000 RPM
Bar Capacity: 65 mm
Power: 20 kW (@ 100%)
Power: 27 kW (@ 40%)
Synchronous Spindle
Speed (max.): 4,500 RPM
Power (max.): 4.2 kW
Capacity 65mm
Ran oil
Still in production, running nylon
With 12-ft Bar Feed (pictured)
Chip Conveyor
Comes the a good amount of tooling
Control Type: Siemens SINUMERIK 840C
Spindle Speed (max.): 6,000 RPM
Power Requirements (V/Hz/PH): 400/60/3
Main Spindle
Speed (max.): 6,000 RPM
Bar Capacity: 65 mm
Power: 20 kW (@ 100%)
Power: 27 kW (@ 40%)
Synchronous Spindle
Speed (max.): 4,500 RPM
Power (max.): 4.2 kW
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:50 PM
Industry: Circuit Breakers
Description: Looking for a cubicle TOC switch for GE PowerVac VB switchgear
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 2:24 PM
Industry: Circuit Breakers
Description: Looking for a GE relay PN: 12PJV11BD4; 48VDC, instantaneous undervoltage relay
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 1:42 PM
Industry: Circuit Breakers
QTY 1
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 1:09 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: looking for a used 10' x 16 ga CNC folder & shear with rear sheet supports and front return of sheared parts. Any brand or manufacturer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 1:05 PM
Industry: General Machinery & Equipment
Budget: $5,001 - $10,000
Description: used 18 or 16 ga Pittsburgh rollformer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 12:45 PM
Industry: Generators & Engines
Price: 43500
Engine Model: 3412
Engine AR# 7E-0160
Engine Perf Spec: 0K-0526
Engine Serial#: 81Z24037
Engine Displacement: 27.0 L
HP: 752 @ 1800 RPM
Cylinders: V-12
RPM: 1800
Fuel: DIESEL
Year of MFG of engine: 1999
HOURS: 495
Manufacturer: Caterpillar
Generator Model: SR4B
Generator Serial#: 9FG01926
Arrangement #: 9Y-0448
Frame: 593
KW: 500KW PRIME
Voltage: 208 (Can be changed)
PHASE: 3
Amps: 1735
Hertz: 60
RPM: 1800
Engine AR# 7E-0160
Engine Perf Spec: 0K-0526
Engine Serial#: 81Z24037
Engine Displacement: 27.0 L
HP: 752 @ 1800 RPM
Cylinders: V-12
RPM: 1800
Fuel: DIESEL
Year of MFG of engine: 1999
HOURS: 495
Manufacturer: Caterpillar
Generator Model: SR4B
Generator Serial#: 9FG01926
Arrangement #: 9Y-0448
Frame: 593
KW: 500KW PRIME
Voltage: 208 (Can be changed)
PHASE: 3
Amps: 1735
Hertz: 60
RPM: 1800
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 11:13 AM
Industry: Circuit Breakers
Qty 2 - RLA36120CU41A (100KA at 480V with 3.0A relay)
OR
Qty 2 - RLA36120CU44A (100KA at 480V with 6.0A relay)
It will be one or the other once the customer decides on which, but will take a quote on anything better 3.0A relay as well and does not have to have the display either ie ending in 31A, 33A, or 43A, but needs to be 100% rated.
OR
Qty 2 - RLA36120CU44A (100KA at 480V with 6.0A relay)
It will be one or the other once the customer decides on which, but will take a quote on anything better 3.0A relay as well and does not have to have the display either ie ending in 31A, 33A, or 43A, but needs to be 100% rated.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 10:52 AM
Industry: General Machinery & Equipment
Description: need Mazak with a sub-spindle ( qt-200ms or like )
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 10:51 AM
Industry: Motors - A.C. & D.C.
For pricing and additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 10:50 AM
Industry: Motors - A.C. & D.C.
Description: Caterpillar engine 3408, 316 kilowatts
For pricing and additional photos, please reach out to us at the contact info provided.
For pricing and additional photos, please reach out to us at the contact info provided.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 10:09 AM
Industry: General Machinery & Equipment
Price: 3200.oo
Description: I bought this machine new, hardly used it, maybe 10 residential duct jobs, retired now. it does 20 gauge, runs on 110 or 220, I put caster wheels on it for moving around, it is 300 pounds or so, fully serviceable with external grease fittings
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:53 AM
Industry: General Machinery & Equipment
Description: Customer looking for a 2" drill grinder in good working order, $2k budget-
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:48 AM
Industry: General Machinery & Equipment
Price: 95000
Description: 2013 Mori Seiki NH6300DCGII CNC Horizontal Machining Center, 41.3" x 35.4" x 38.6" Travels, CAT50, 10,000 RPM,
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:45 AM
Industry: General Machinery & Equipment
Price: Best Offer
Description: Kira KDM3VCD Vertical Machining Center, 2012, 25" x 14" x 22" Travels, 10,000 RPM, 40 Taper, 40 ATC (652)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:45 AM
Industry: Generators & Engines
Price: $15,000.00
600kw 480v
s/n 2091356
Low hours
Ship loose mufflers.
s/n 2091356
Low hours
Ship loose mufflers.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:39 AM
Industry: General Machinery & Equipment
Description: 1982 Geminis Engine Lathe Model 1400, Swing 62", x 320" centers, Threading Steady Rests price $35,000 loaded
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:36 AM
Industry: General Machinery & Equipment
Description: One Pair (2) Angles plates 24" x 36" x 96" price must move Total Price for both $6,500
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:30 AM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:26 AM
Industry: General Machinery & Equipment
Price: 7950
Description: Webb Model WL-520 Engine Lathe, 20.5" Swing over bed, 80" Between centers, 12" chuck , Accurite III DRO, 1350 Spindle Speed,
(C1600)
(C1600)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 9:23 AM
Industry: Generators & Engines
- Engine Serial No.: 28408946
- CPL: 2227
- Advertised HP: 1,850 HP @ 1800 RPM
- HP (alternate): 1,645 HP @ 1500 RPM
- Marine Aux Engine
- CPL: 2227
- Advertised HP: 1,850 HP @ 1800 RPM
- HP (alternate): 1,645 HP @ 1500 RPM
- Marine Aux Engine
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 8:54 AM
Industry: Generators & Engines
Price: 15000
Description: Model # RG02515GNAX
Protector Gaseous 25kW 120/208volt 3Phase Liquid-Cooled Generator … [Read more...]
Protector Gaseous 25kW 120/208volt 3Phase Liquid-Cooled Generator … [Read more...]
• Size: 25kW 120/208volt (3)Phase - Cooling: Liquid-Cooled Generator
• Fuel type: Natural Gas
• Emissions: No Catalytic converter
• Generator weight: 777lbs
• Running Amps: 87 amps
• locked rotor amps: 130 amps
• Generator dimensions – Height 36in, Length 62in, width 31in
• Engine block heater (Extreme Cold Weather Kit) model 6174
• Automatic Transfer Switch 100 Amps Model RTSN100G3
• Fuel type: Natural Gas
• Emissions: No Catalytic converter
• Generator weight: 777lbs
• Running Amps: 87 amps
• locked rotor amps: 130 amps
• Generator dimensions – Height 36in, Length 62in, width 31in
• Engine block heater (Extreme Cold Weather Kit) model 6174
• Automatic Transfer Switch 100 Amps Model RTSN100G3
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 8:54 AM
Industry: General Machinery & Equipment
Price: 27500
MATERIAL WIDTH 18"
THICKNESS CAPACITY .02" TO .310"
ENTRY PINCH ROLLS YES
PINCH ROLL DIAMTER 5"
BREAKER ROLLS 7
BREAKER ROLL DIAMETER 3.5"
SPEED 0 TO 80 FPM VARIABLE
HOLD DOWN ARM
PEELER ARM
MOTOR DRIVE 7.5 HP
THICKNESS CAPACITY .02" TO .310"
ENTRY PINCH ROLLS YES
PINCH ROLL DIAMTER 5"
BREAKER ROLLS 7
BREAKER ROLL DIAMETER 3.5"
SPEED 0 TO 80 FPM VARIABLE
HOLD DOWN ARM
PEELER ARM
MOTOR DRIVE 7.5 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 30, 2026 at 8:17 AM
Industry: General Machinery & Equipment
Description: Datron Neo High Speed Milling Machine, This Make and Model Only Please
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 6:00 PM
Industry: Other Electrical & Power Equipment
Description: Qty 3 or 4, 15 kV class 95 kV BIL, 13" creep, 8 " height. Any bolt pattern. Prefer epoxy but porcelain Ok
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 3:07 PM
Industry: General Machinery & Equipment
Description: In search for a mold to produce a straight walled 15 gallon (17" dia.) open head poly drum.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:54 PM
Industry: Circuit Breakers
Budget: $10,001 - 50,000
Description: Switchgear low voltage 480v 4000 amps 3ph 60hz fitted w/4000 main input breaker with basic metering and corresponding 480/120v PT's, 4000/5CT's
to be used with 3000kw power generator 480v. If possible lockout relay and connecting switches plus the output 4000amps bus bar … [Read more...]
to be used with 3000kw power generator 480v. If possible lockout relay and connecting switches plus the output 4000amps bus bar … [Read more...]
As is or reconditioned at a higher price
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:44 PM
Industry: Motors - A.C. & D.C.
Description: Trying to help a customer out. Need a NEW or NEW Surplus 250HP-600RPM-VSS-ODP motor.
Anyone have one in stock?
Anyone have one in stock?
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:30 PM
Industry: General Machinery & Equipment
Description: Quincy QSI-500 Air compressors. Rotary screw, well maintained with Pneumatech Air Dryer.
• Airflow Capacity: 500 CFM … [Read more...]
• Airflow Capacity: 500 CFM … [Read more...]
• Motor Power: 100 HP
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:28 PM
Industry: General Machinery & Equipment
Description: Okuma LU35-2SC/850, 29" x 36" Turning Center, 2 Tool Turrets, Chip Conveyor, 18" 3-Jaw Rohn Geared Chuck, 3200 RPM
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:24 PM
Industry: General Machinery & Equipment
Description: Takang TKV-860HT Twin Spindle CNC Vertical Boring Mill, 39.37" Cutting Dia., 10-1500 RPM, Fanuc OI-TF CNC Control, 2- 31.5" 3-Jaw Chucks, 2-Rear Discharge Chip Conveyors,
New 2016, Very Low Hours
New 2016, Very Low Hours
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 2:01 PM
Industry: Generators & Engines
Has to look presentable, but not brand new, and roll - aside from that, its mainly going to come down to cost
So please send over pics and pricing of whatever you have available
So please send over pics and pricing of whatever you have available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:51 PM
Industry: General Machinery & Equipment
Price: 45% off current list price
Description: MultiJet Printing (MJP) technology produces high fidelity parts. The printer is easy to operate and allows multiple parts to be printed at once. Post processing removes wax to facilitate highly accurate, complex geometries. Shipping is not included due to the printer size and your unknown destination.
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
A 1 year parts warranty may also be available depending on your US location. … [Read more...]
Brochure: https://surplusrecord.com/wp-content/plugins/surplus_mysr/registrant_uploads/90748544787655471465.pdf
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:44 PM
Industry: Generators & Engines
Budget: $10,001 - 50,000
Description: Would like to buy a new surplus cat 3024ct/perkins 404c-22 tier 20 emissions engine serial number gga34114 arrangement number 3005206
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:42 PM
Industry: General Machinery & Equipment
Description: 38” x 18” Peddinghaus / Gernetti Twin Column Hydraulic Horizontal Band Saw – New 1997
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:28 PM
Industry: Processing Equipment
Price: Best Offer
Description: Lime Silo. I have the Owners manuals and Certs upon request.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:26 PM
Industry: Processing Equipment
Price: Best Offer
Description: 10,000 Gallon Stainless Steel Ammonia Tank. Have the Owner Manels and Specs upon request.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 1:06 PM
Industry: General Machinery & Equipment
Description: Need a real nice 10 Ton Crane with 200' of runway at 55'-60' span. May take down if in TN,KY or OH.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 12:56 PM
Industry: General Machinery & Equipment
Description: I have 48 Miller Welder Power Supplies that must move asap. This is a wholesale deal not retail so call me to discuss a package deal.
(21) Model XMT 450 … [Read more...]
(21) Model XMT 450 … [Read more...]
(20) Model 456XMT
(1) Phoenix 456
(3) Invision 456P
(3) XMT350
All were taken out of service and are in good working order.
(1) Phoenix 456
(3) Invision 456P
(3) XMT350
All were taken out of service and are in good working order.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 12:18 PM
Industry: General Machinery & Equipment
Description: 1982 Geminis Enginw Lathe 62" swing, x 320" centers, 42" socs, threading, 560 RPM, Must Move immediate sale
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 12:06 PM
Industry: Circuit Breakers
Description: Looking for a GE Power Vac breaker, Cat. No. VB1-7.2-500, 1200A
8.25 KV Max. … [Read more...]
8.25 KV Max. … [Read more...]
ML-18 mech.
125VDC control
Must be VB1.
125VDC control
Must be VB1.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:58 AM
Industry: General Machinery & Equipment
Price: 29500
NEW 1982
MODEL B-100WP
Spindle Diameter,4 in
Spindle Taper,50 Taper
Spindle Speed, 21 TO 1,200 RPM
Spindle Motor Power,20 HP
X-Axis Travel,96 in
Y-Axis Travel,60 in
Z-Axis Travel,43 in
W-Axis Travel,26 in
Table Size (L x W),96 in x 48 in
MODEL B-100WP
Spindle Diameter,4 in
Spindle Taper,50 Taper
Spindle Speed, 21 TO 1,200 RPM
Spindle Motor Power,20 HP
X-Axis Travel,96 in
Y-Axis Travel,60 in
Z-Axis Travel,43 in
W-Axis Travel,26 in
Table Size (L x W),96 in x 48 in
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:51 AM
Industry: General Machinery & Equipment
Price: 39999
Description: 4x8,5x10, and 6x12 fiber lasers available
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:48 AM
Industry: General Machinery & Equipment
Description: Trak ELX Teach CNc Control. 6.5" 3Jaw, 8" 4 Jaw. Collets Chuck. Manuals.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:38 AM
Industry: Generators & Engines
Price: $195,000
Description: 7042GSI Gas Compressor engine 900 RPM- Rebuilt- Zero hours- Warranty
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:33 AM
Industry: Generators & Engines
Price: $19,500
750kw, 480 volt
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
FOB Louisiana
Control panel
Circuit breaker
Fuel tank base
Sound attenuated enclosure
EPA TIER 2
Year manufacture 2005
571 total hours since new
FOB Louisiana
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:22 AM
Industry: Other Electrical & Power Equipment
Budget: $10,001 - 50,000
Description: i need a request for quote on - OVEN (HIGH GRIEVE LA-550)
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 11:14 AM
Industry: General Machinery & Equipment
Description: TRUE GRIT swaging presses, need one 500-ton machine for swaging and one 200-400 ton machine for pin end reduction
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 10:48 AM
Industry: General Machinery & Equipment
Description: Sodick AL60 CNC EDM or one size smaller
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 10:03 AM
Industry: Circuit Breakers
Price: Best offer
Description: 3 4000amp ds840 drawout and 1 2000 amp clean, working just out of service. Building demo.
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 10:00 AM
Industry: General Machinery & Equipment
Price: 14,500.00
Description: 20,000 Lbs Coil Weight, 72" Coil Width, 72" OD, 18"-22" ID, Coil Car, Power Expansion, Jog, Holddown
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 9:28 AM
Industry: Transformers
Description: Looking to replace a 350KVA, 2400 to 480 volt transformer
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 9:19 AM
Industry: Motors - A.C. & D.C.
VERTICAL HOLLOW SHAFT MOTOR
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 29, 2026 at 7:59 AM
Industry: General Machinery & Equipment
Description: Coating line (batch line) with sand blaster and painting booth included. Parts 32ft by 10ft by 40in (3D parts)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 10:34 PM
Industry: General Machinery & Equipment
Price: best offer
X/Y/Z axis travel: 3,000/1,200/600mm
Spindle nose to table surface: 50-650mm
Distance btw columns: 1,460mm
Spindle taper: BT40
Spindle transmission: Direct driven
Spindle speed: 10,000rpm
Coolant thru spindle
Air thru spindle
Spindle motor: 5.5/7.5kW
X/Y/Z axis motor: 5.5/2.5/4.5(B)kW
Table size: 1,220x3,440mm
Table load: 3,000kg
Tool capacity: 30ATC
Floor space: 8,500x3,800x2,800mm
Machine weight: 16,500kg
Spindle nose to table surface: 50-650mm
Distance btw columns: 1,460mm
Spindle taper: BT40
Spindle transmission: Direct driven
Spindle speed: 10,000rpm
Coolant thru spindle
Air thru spindle
Spindle motor: 5.5/7.5kW
X/Y/Z axis motor: 5.5/2.5/4.5(B)kW
Table size: 1,220x3,440mm
Table load: 3,000kg
Tool capacity: 30ATC
Floor space: 8,500x3,800x2,800mm
Machine weight: 16,500kg
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 5:51 PM
Industry: General Machinery & Equipment
Description: Tsugami BH-38SY CNC Automatic Screw Machine, very good condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 3:59 PM
Industry: General Machinery & Equipment
Description: Approx 120,000 Balancing Machine. Running or not.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:20 PM
Industry: Generators & Engines
Description: We are looking for the following industrial engine. We just need a serial number for a rebuild. This engine does not need to be running, and it would be even better if it wasn’t, for price, but any matching engine would be great.
Engine info … [Read more...]
Engine info … [Read more...]
o C18
o Serial Number Prefix | BDN
o arrangement number | 472-8139
o Serial Number Prefix | BDN
o arrangement number | 472-8139
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:17 PM
Industry: General Machinery & Equipment
Description: 4" Bar Capacity CNC Lathe with Live Tooling & Y-Axis. No Sub-Spindle
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:14 PM
Industry: Transformers
34,500 hv secondary
around 60-100 mva
quote what you have
around 60-100 mva
quote what you have
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:11 PM
Industry: General Machinery & Equipment
Description: Mazak QTN-250MY - No Sub-spindle. Fusion or Newer Control
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:09 PM
Industry: General Machinery & Equipment
Description: Mazak FH-5800 or FH-6000 with Full 4th Axis.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:02 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:01 PM
Industry: General Machinery & Equipment
Description: Preferably with bar feed, in good working condition
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 2:01 PM
Industry: General Machinery & Equipment
Capacity: 45mm
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Saw, Bar Feed, Inverter
Configured as pictured
(3-Axis CNC Slide, not included)
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 1:59 PM
Industry: General Machinery & Equipment
Currently in production.
Equipped with oriented spindle stopping (2500 RPM) on the revolving head, suitable for cross drilling/milling operations
Chip Blaster High Pressure pump
8 Port Programmable High Pressure Manifold
1000 PSI
12 Port Coolant Manifold with Shut Off Valves
Parts Catcher
Sub Spindle & Back Working Attachment
Spindle Drive Motor: 5.00 Nm (Nominal Torque)
Max. Speed: 5000 RPM
Feed Motors (X & Z): 2.1 N
Equipped with oriented spindle stopping (2500 RPM) on the revolving head, suitable for cross drilling/milling operations
Chip Blaster High Pressure pump
8 Port Programmable High Pressure Manifold
1000 PSI
12 Port Coolant Manifold with Shut Off Valves
Parts Catcher
Sub Spindle & Back Working Attachment
Spindle Drive Motor: 5.00 Nm (Nominal Torque)
Max. Speed: 5000 RPM
Feed Motors (X & Z): 2.1 N
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 1:52 PM
Industry: General Machinery & Equipment
Description:
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 1:51 PM
Industry: Processing Equipment
Description: looking for 4-10 lane stick pack machine to purchase
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 1:14 PM
Industry: General Machinery & Equipment
Price: 24500
EXTRUDE HONE ............... YES
PASS THRU WASHER ........... YES
ELECTRICS .................. 460V/3PH/60HZ/122.5AMPS
PASS THRU WASHER ........... YES
ELECTRICS .................. 460V/3PH/60HZ/122.5AMPS
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 12:57 PM
Industry: General Machinery & Equipment
Budget: $10,001 - 50,000
Description: im looking for a 3 roll plate machine 120" with capacity to roll 3/4" and under
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 12:54 PM
Industry: Generators & Engines
Description: Looking for a 2-2.5MW Medium Voltage Enclosed Diesel Generator, let me know what you can offer.
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 12:53 PM
Industry: General Machinery & Equipment
Description: Hi we have a Devlieg 4B72 that need a couple of the vertical alignment assemblies (see pic)These actuate down from a 48X32" rotating table (see serial number of the table pic). It may be the same part for other size tables as well. I was checking to see if there was any chance you might have a couple of these in your parts that you can sell. If you need any more info or part numbers that might help please let me know. Thanks
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 12:29 PM
Industry: Motors - A.C. & D.C.
Description: (2) New surplus--Weg--1000 hp--893 rpm--4160 volts--7009 Frame--WPII--Best offer--Pictures available
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 12:17 PM
Industry: Processing Equipment
Price: Best offer
Description: Large Oldenburg Stamler steel flight feeder truck or loader dump hopper/ conveyor unused, needs refurbished. The hopper has hydraulic folding sides and the hopper discharge gate.
Used for testing only for 10 hours feeding coal sludge to a power plant. … [Read more...]
Used for testing only for 10 hours feeding coal sludge to a power plant. … [Read more...]
The motor, pump and controls are included.
The dimensions are 11'-10" wide outside 11'-6" truck or loader dump width 9'-0" high
The Hopper is 16' long x 11' wide with folding sides.
The steel flight conveyor extends 15' outside
The dimensions are 11'-10" wide outside 11'-6" truck or loader dump width 9'-0" high
The Hopper is 16' long x 11' wide with folding sides.
The steel flight conveyor extends 15' outside
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 11:48 AM
Industry: Generators & Engines
Description: looking for a lm6000 engine only
quote what you have
quote what you have
Requested by Dealer:
Registered users login here to see contact info OR request access if not registered.
Posted: April 28, 2026 at 11:44 AM
Industry: General Machinery & Equipment
Description: Hello I am looking to get a Bundler seal bar for a Arpac 105-TW-28 I was curious if you have any?
Thank you … [Read more...]
Thank you … [Read more...]
Ryan
Requested by Manufacturer:
Registered users login here to see contact info OR request access if not registered.
