Buy or Sell Your Portable Cooling Towers

3- 2014 altimore Air Coil 750-ton Cooling Tower, video upon request., Call for price!, Must be removed from property by December 19th, reduced price.

Used Tower Tech Inc. Model TTMT.288.219, Cooling Towers., (2) available, Additional info is available., Manufacturer TOWER TECH, INC. Model TTMT.288.219 Year 1996 Condition Used Serial Number MO1S107-29 Stock Number 904723.120MA.

1998 Marley Cooling Tower with SS Basin. MF356392 ITA200 BO4714W. Nominal tonnage: 200 TR with 10F TD and 78F WB 9 1,200 GPM). Fan Motor: 15 HP, 230/460 V, 60 Hz, 1765RPM, TEFC, SF 1.15, 39/19.5 Amp, 254T Frame. Removed from service running as part of a system upgrade in August 2012. Date of Manufacture: 11/19/1998.

Carrier Corporation Cooling Tower. Model: 27N9. Serial No: 710142.

750 gpm 93-83-801611x1611\.

Make: SPX Marley, Model: NC2121GS, Year: 1996, Machine Location: Ohio, TOWERS: 1, CELLS: 1, YEAR: 1996, STARTUP DATE: 05/31/1996, GPM: 660, TONNAGE: 220, HOT WATER TEMP: 95, COLD WATER TEMP: 85, WET BULB TEMP: 78, LENGTH: 7’-10 ¾”, WIDTH: 15’-6”, HEIGHT: 10’-2 ¼” ...more

tower tech model ttxl-061975 cooling tower. open circuit / modular fiberglass cooling tower rated for approximately 600 tons of cooling capacity. it s a fiberglass reinforced plastic (frp) casing and basin, pvc fill media, and drift eliminators. unit has direct-drive axial fans with a hot-water spray distribution ...more

used- 450 ton marley double flow cooling tower model mhf7113. 410-746 ton cooling capacity, based on 3gpm/ton at 95 f hot water 85 f cold water 78 f wet bulb configuration. built 2016. dimensions 13'-11" long x 25'-10" wide x 22' tall 41,310lbs.

Evapco Cooling Tower, model 4T29918, serial number 14587447, with a cooling capacity of 547 tons at 75F wet bulb temperature. It operates with an entering water temperature (EWT) of 93F and a leaving water temperature (LWT) of 83F, handling a flow rate of 1600 GPM. The unit is powered by two 20 HP fans, running on ...more

used- lot of (8) evapco eco-atwb 24-4n20 closed circuit cooling towers. approximately 600 ton each. each approximate 2,800 gpm. (2) 40hp fans, approximate 281,190 cfm. coil volume 5,107 liters (1349 gallon). (2) 40hp fans. setup as (2) cell units. seller would like to sell all 8 units at one time, however, will accept ...more

Used Marley Series NC1121GS cooling tower. S/N NC1121GS-074323-005-95. 153 ton capacity. Flow rate 460 gal/min, hot 95 deg., cold 85 deg., wet bulb 76 deg. one fan, 2.5 HP 3/60/220 motor. New 1995., Marley Series NC1121GS.

Manufacturer: Marley Cooling Tower Co., Serial Number: 56429 – 1/A92520A/4812, Series: 4812 Aquatower®, Capacity: 15 Ton, Belt Length: A75, Cooling Fan: 24” fan, 1.0 HP, Power Required: 460 Volt, 3-Phase, 60 Hz, Overall Dim’s: 36” wide x 36” long x 62” high.

used- baltimore aircoil 455 ton cooling tower, model number 3455a-mm, open loop. (2) 8,000 watt heaters. 20 hp totally enclosed fan. 460 volt. 3 phase. all steel construction. 8? water inlet and outlet. oad: 245"l x 122"w x 136'h. 1000 gpm. approx. 15,000 lbs.

Overview, Offered for sale is a 2019 Evapco AT-212-3L28 Induced Draft Cooling Tower, engineered for high-efficiency evaporative cooling in HVAC and process applications. Built with G-235 hot-dip galvanized steel and branded with the Evapcoat® Seal of Quality, this unit is a durable and proven performer for both ...more

used spx marley nc8409u crossflow cooling tower 790 ton/cell | 2018 build | 4-cell industrial system; 12', (5) blade fan; 6,600 gpm for combined all 4 cells/1650 gpm individually; 109.0 f hot water; 85.0 f cold water; 76.0 f entering wb; 50 hp, 1800 rpm, 60/230-460v; built 2018.

Baltimore Air Cool Model PT2-0812A-3N1 & PT2-1212A-3N1 Cooling Towers S/N U122706319-01 S/N U148100927-01-01 Certified Capacity: 993.00 USGPM of water from 95.00°F to 85.00°F at 78.00°F entering air wet bulb and 6.16 PSIG of total (static lift + spray) pump head from the unit base. New In 2012.

643 Ton BAC Cooling Tower – Cross Flow Design, Stainless & Galvanized Basins We are offering a 643 Ton BAC Cooling Tower (Model: BAC 3643C, Serial Number: U136209901-02-01) designed for efficient heat rejection in industrial and commercial applications. Featuring a cross flow design, this cooling tower ...more

used- marley 400 ton cooling tower, model nc212. galvanized steel induced draft cross flow 15 hp fan drive. 540 gpm. dimensions 8' wide x 10'2" high.built 1991.

Delta Model 4-50 cooling tower with 5 HP fan motor, rated for 90 GPM, constructed from corrosion-resistant engineered plastic. s 4" water inlet and outlet, 2-1/2" overflow and drain connections, and operates at 230/460V. This unit is unused and was manufactured in 2023., HP: 5, Gallons per Minute: 90, Voltage: ...more

This Cooling tower will be removed for service on March 1, SERIAL#: 10015574, MODEL#: NC8405PAN1SGF, YEAR: 2009, TOWERS: 1, CELLS: 1, STARTUP DATE: 11/24/2009, GPM: 1,050, TONNAGE: 350, HOT WATER TEMP: 95, COLD WATER TEMP: 85, WET BULB TEMP: 78, DRY BULB TEMP: 93.71, Location: Florida.

Make: International Refrigeration, Model: F 20 T 600 G, Year: 2019, Machine Location: California, -Input Temp: 35,0°C, -Output Temp: 29,5°C, -Wet Bulb Temp: 24,0°C, -Flow: 16,0 m^3/h, -Capacity: 90 Kcal/h, -Electrical Requirements: 220/380V, 60Hz.

used- bac baltimore air coil model s15e-1212-12kn-2/l series 1500 double cell cooling tower. 802 nominal tonnage. based on 95 degrees f entering water temperature to an 85 degrees f leaving water temperature at a 78 degrees f entering wet-bulb temperature. galvanized panels. (2) 66" diameter axial fans. hinged access ...more

Used Marley NC212 400 Ton Galvanized Steel Induced Draft Cross Flow Cooling Tower, Manufacturer: Marley, Model: NC212, Type: Induced Draft Cross Flow, Tons: 400, GPM: 540, Material: galvanized steel, Fan drive: 15 HP, Fan Diameter: 7', Dimensions: 8' wide X 10'2" high, Year: 1991, 1991 MARLEY NC212.

Used Marley NC212 400 Ton Galvanized Steel Induced Draft Cross Flow Cooling Tower, Manufacturer: Marley, Model: NC212, Type: Induced Draft Cross Flow, Tons: 400, GPM: 540, Material: galvanized steel, Fan drive: 15 HP, Fan Diameter: 7', Dimensions: 8' wide X 10'2" high, Year: 1991, MARLEY NC212.

Used 458 Ton Baltimore Air Cooling Stainless Steel Cooling Tower, Tonnage: 458 tons, Manufacturer: Baltimore Air Cooling, Model: 3473C-MM Series 3000, Serial: U110074401, Single cell units, 25 HP fans, 118,870 CFM. 10900 lb. 21ft6.5in L x 10ft 10.625in W x 9ft 11.75in H, BALTIMORE AIR COOLING 3473C-MMSERIES3000.

Used 458 Ton Baltimore Air Cooling Stainless Steel Cooling Tower, Tonnage: 458 tons, Manufacturer: Baltimore Air Cooling, Model: 3473C-MM Series 3000, Serial: U110074403, Single cell units, 25 HP fans, 118,870 CFM. 10900 lb. 21ft6.5in L x 10ft 10.625in W x 9ft 11.75in H, BALTIMORE AIR COOLING 3473C-MMSERIES3000.

Stainless Steel Dual Cell Cooling Tower system, 674-ton capacity, Evapco Model AT-29824 with all stainless steel construction, 316 stainless steel pan. Includes Twin 25 HP motor drives, 220/440 VAC. Unit designed as 2 cell system with each cell measuring 9' wide X 12' long X 13' tall, ships in 4 pieces. ...more

SKU: 130561, Model: AL4000, Condition: Used, Dimensions: 165.00 (H) x 54.00 (W) x 130.00 (L) inches, Additional :, Max Tow Speed: 60 mph/ 96 kmh, KVA: Stand BYL: 188/ Prime: 181, Tire Pressure: 35 psi/ 250 kpa, Tongue Weight: 147 lbs/ 66.7 kg, Vehicle Type: 4ZJSL141X91000939, Gross Vehicle Weight Rating: 1279 kg (2819 ...more

DOOSAN portable lighting with only.2 hours.

Marley Cooling Tower Control Panel. Includes Altivar motor controller. 20 HP / 15 KW, 460V, 3-phase, 60 Hz, 27 amps output. Quantity available: 1 (1 has sold).

Marley Cooling Tower Fan Blade. Dimension: 1 ft. 1 in. at base of blade, 8 in. at tip of blade. Overall dimensions: 3 ft. 4 in. L x 1 ft. 1 in. W x in. thick. (ACN12)(BL).

Make: Monark Equipment Technologies, Model: 16', Year: 2021, Machine Location: Michigan, Conveyor 1: 16″ Width × 16′ Length PVC Belt-Conveyor, Conveyor 2: 16″ Width × 16′ Length Motorized PVC Belt-Conveyor, Belt Material: White PVC, Drive Roller: 4″, Construction: ...more

Carrier Weather Maker I Cooling/Heating System, Model # 48DJD006510, S/N 2491G966677, This unit has electric cooling and gas heating. Dimensions are 44 in. W x 74 in. L x 34 in. H. This piece is being offered and sold as is. It may or may not be complete. Please be sure and look at pictures and ask for additional ...more

2003 Miller-Leaman Inc. Turbo-Disc Process Cooling Water Filtration System. Model: ATD2(2)x3-130M-P135-A. Turbo-Disc filter systems are designed for the filtration of water for cooling towers and chilled water systems and require a supply of compressed air for operation. Rated capacity: 135 gpm @ 80 psi max. ...more

This listing is for a NEW DAIKIN AKJ909., High-efficiency air conditioning unit designed for residential or light commercial use. Operates on 200220 V at 50 Hz. Ideal for use in split system configurations., See photos for., Part No: AKJ909, Type: Air Conditioning Unit, Condition: NEW, Voltage: 200220 V, Frequency: 50 ...more