巴氏杀菌机

Used APV pasteurizer on unitized base. APV plate heat exchanger, sanitary centrifugal pumps, retention tube, balance tank, high pressure pump, APV jacketed Liquifier, jacket rated 75 psi @ 350F; 75 HP motor, stainless steel piping, fittings and valves. Control panel., APV 75 HP.

Heinzen HMI Pasteurizing Conveyor for Whole Citrus Fruit. Maximum aperture/clearance above belt: 24 in. W x 5 in. H. Height at conveyor infeed/exit: 92/74 in. This unit was part of a Fresh Express citrus line that was processing oranges and grapefruit. Product was pre-rinsed then sent to this unit for pasteurization ...more

Make: Napasol, Model: Steam Pasteurization System, Year: 2015, Machine Location: Upon Request, MODEL / YEAR: NAPASOL STEAM PASTEURIZATION SYSTEM, 2015, TYPE: BATCH STEAM/VACUUM AUTOCLAVE PASTEURIZER FOR LOW-MOISTURE PRODUCTS, CAPACITY: 6-BIN LOAD (SUPPORTS APPROX. 15,600 LB/HR DEPENDING ON PRODUCT TYPE AND DENSITY) ...more

Rossi & Catelli tubular HTST pasteurizer with Macropak aseptic filling system for drums, totes and other containers. Product is set up to be fed from evaporator, the system sterilizes the product prior to feeding into aseptic filler. Previous application ran with (11) Holding tubes, (6) Cooling tubes and (6) ...more

SMB Stainless Steel Cooling Tunnel. Model: 04.1.0.213. S/N: 3325. Maximum aperture/clearance above belt per section: 6 ft. 5 in. W x 9 in. H. Conveyor infeed maximum aperture/clearance: 1 ft. 3 in. W x 12 in. H. Conveyor infeed/exit height: 40 in. (14) 11-1/2 in. W x 6 in. H pan access ports. Sew-Eurodrive Motor ...more

used- hiperbaric hpp (high pressure pasteurizer), model 6000/525. max. operating pressure: 6,050 bar. design pressure: 6,600 bar, design temperature: 40c. inlet water maximum temperature: 25c (if the temperature is higher a protection against corrosion must be used). minimum temperature of the input water: 5c. power ...more

used- tetra pak pasteurizer, model c6-sr. rated volume: 70 l, design pressure: 0/10 bar, design temp: 0/150 deg c. alfa laval plate heat exchanger 316 stainless steel. serial# 30106-09519.

used codi steam tunnel pasteurizer 40 cpm, 3-zone, stainless steel (2025). the throughput is (40) 12oz cans/min. 304 stainless steel construction. 75 square foot treatment surface. 3 zone, 5' w x 20'l tunnel area. (2) warming zones, (2) holding zones, (2) cooling zones. 1,350,000 btu/hour steam requirement. ...more

Retention Coil for Pasteurizer, 316 Stainless Steel - Includes 3" diameter x 5' long tubes configured as a 6-pass system. Previously used for holding tubes in a pasteurizing application., Materials of Construction: 316 Stainless Steel, Basis: FOB.