Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record

CNC MACHINERY & EQUIPMENT:
PLASMA CUTTING SYSTEMS (FLAME CUTTERS), CNC

Aleco Machinery dealer of quality used metalworking equipment
There are 168 listings in this category
Update: Tue, Jan 26, 2021 00:34:39
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

Alltra #PG14-12, 12' x 21' 6", 2 plates, HPR400XD Autogas HyPrecision, Burny 10, height Control, heat shield, 2012

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Alltra #PG14-6LHTR, Burny 10 LCD, Hypertherm HPR 260XD

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Amada turret laser, #84441

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Bendmak #BPM30/60XPR300, CNC Oxy-plasma cutting, 9' 8" x 19' 6" tbl, 2-4 Axis

  Photo
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Burny Kaliburn #Spirit-II, CNC plasma cutter, Galil control w/6-Axis Control, 10' x 30', 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Burny Kaliburn #Spirit-II, CNC plasma table, 10' x 30' table, Galil Controller with 6 axis control‹, 2013

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Burny Kaliburn #Spirit-II-400A, high definition plasma cutting system, 380-600 V.

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

C & G Systems #Challenger, plasma / oxy cutting system, 10' x 20', Burny 3 CNC, Miller plasma, motorized lifter

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

C & G #Taurus-2000, water table, Burny controller, 100 amp Hypertherm HD3070 plasma

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

C & G, 6' x 12' plasma cutting system, Burny 10 LCD Plus Control, downdraft duct table, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

CandCNC #MP3600, CNC Plasma, 5' x 4' table, 1" milde steel, Hypertherm 65, 2017

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Controlled Automation #MultiMax, 10' x 53' Dual Head Plasma Table Light Use Machine, 2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Controlled Automation #Multimax plasma/oxy cutting system, 10' x24', 1000 IPM, Dynamic speed control, Baldor servo drives, dual side precision gear rack drive, 2007/2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

CSI #Kodiak, CNC cutting system, 10' x 25', 6 Oxy fuel torches, Burny Fantom Control, 2007, #10709

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Cutting Systems #Raptor, CNC Plasma, 8' x 20', Hypertherm HPR400XD, Downdraft Table, 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Cutting Systems #Saber Cut OxyFuel CNC Cutting Machine, 12' x 40, Water Table, 2010

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Durma #PLC-2040, 260 amp plasma cutter, 6' x 13' table, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Durma #PLC2040, high definition CNC plasma cutter, 6' x 13' cutting area, 2010

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Dynatorch #5X10, plasma table, 5' x 10' table, 200 amp HT, #7814

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Dynatorch #6X12XLE, CNC Plasma Table, 6' x 12', water bed, torch height control, Hypertherm Maxpro 200 new in 2019, 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Dynatorch #XLR8, plasma cutting, 5' x 10', Thermal Dynamic Ultra Cut, 2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Engel Vulcan #SP510, CNC plasma cutter, Siemens Sinumerik 808D Advanced M Control, 2007, #160396

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

Ermaksan #EPL-153-XPR300-5x10, HyPerformance XPR300 core plasma source, dust collector, 2019

 
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Esab #Avenger, 8' x 80',(1) plamas unit,400 amp,(4) Oxy torches,Vision CNC,2002,#27419

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Esab #Avenger-1-CM-300-12, CNC Plasma Table, 10' x 18', 600 Amp, Spare Power Supply, Under Power, 1994

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Esab #Avenger-2-4 (4 meter), 170" W, 88' L rail, 600 amp, beveling, marking, 2 water tables, 2008

 
 RFQ
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

Esab #Avenger-2-4M, plasma cutting system,170" x 42'cut,Vision T5C ctrls,0-850 IPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Esab #E-Vent-DX-510, plasma cutting system, 5' x 10', ESAB CNC Control w/read out, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Esab #GXB-1000, dual drive, CNC plasma shape cutting machine, 10' x 24' water table, 2004

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Esab #Heath-GXL-1600, 4 Oxy/Fuel Cutting Torches, Allen Bradley Series 8200 Control, 1985, #5013

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Esab #Sabre-3600, plasma / oxy CNC plasma cutting system, 14' x 43', Esab Vision PC CNC, Esab ESP 400C plasma, 2005

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Esab #Shadow-II, precision plasma cutting, 8' x 12' table, Vision 1000 CNC Control, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Esab #Shadow-II, CNC Gantry Shape 9' x 30' Cutting Machine, EPP-200 Power Supply, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Esab #Shadow-II, CNC plasma, 12' x 12' capacity, ESAB ESP-200 Power Source, 10 Amps Full Load Current, Vision 1000 Control, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Esab #Stealth-5000, gantry style high performance plasma system, 20' x 60', Vision 2000 CNC, 1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Esab #Stealth-5000-14, CNC oxygen cutting system, 14' x 40', Vision 2000 CNC, 6 oxy fuel stations, pre-owned

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Haco Kompakt #3015, 5' x 10'Hi-Def plasma,Rack & Pinion/Linear guide sys,2007,#30428

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Haco Atlantic #ATPL3015, hi-def plasma cut.sys,5' x 10',Hypertherm Micro EdgePro,'18

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Heath #GXL1600, CNC, 144"Y-axis travel, 3-torch, 2-plasma, 11' x 41' water table, 1983

  Photo Spec Sheet
 RFQ
Daniluk Corp, Oklahoma City, OK 405-745-6644 (Email: sales@daniluk.com) Mike Daniluk

Hornet HD #H60-EBPS, CNC Plasma Cutter, 5' x 10' table, Hypertherm Powermax 125, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Hornet #Hornet-HD, 8' x 20'tbl.,130 amps,Donaldson Torit dust collector,2012,#81581

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Hornet #Retro-Systems, hi-definition plasma cutter, 5' x 10', 180 hours cut time, 2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Hypertherm #130XD, plasma CNC table 118" x 29', 2017

  Photo Spec Sheet
 RFQ
Cedarstone Industry, Houston, TX 281-397-3700 (Email: Info@cedarstoneindustry.com) Max Liang

Hypertherm #HPR130XD, Hi-Definition, 6' x 19', ProCut 2000x9000 Duel-drive Gantry, Hypertherm MiNi EDGE Connect CNC Control, 2017, #7649

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Hypertherm #HPR260XD,EBF 8' x 25' plasma cutter,Edge Pro Ctrl,(2) torches,2011 #31221

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Hypertherm #MAX40CS, Plasma Cutting System, 30/26/13 Amp, 208/240/480V, 7/16" mild steel capacity

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Hypertherm #MAX100, heavy duty air plasma cutting system, 1-1/4" cutting capacity, 230 V., #84499

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Hypertherm #Master/Slave plasma power sources, pre-owned

 
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Hypertherm #Powermax-45XP, hand held, Sept 2019

  Photo Spec Sheet
 RFQ
The Rolling Door Co, Gastonia, NC 704-905-2613 (Email: mterrio@therollingdoorcompany.com) Mark Terrio

Inovatech #PRS900, Robot Plasma Cutting System,HPR 400 XD, (2) 10' X 24' Tables, 2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

IWM #WPC2513-100, Plasma Cutting Table, 4' x 8', 3-Axis CNC Control, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Kalibrun (Lincoln) #Fineline-150, 5' x 10', 460 V., dry table, 150 amp, exhaust system, 2006

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Kaliburn #Proline-2260, 10' x 25' table, dual plasma oxygen head, Burny 10 LCD Control, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Kaliburn #Taurus-2000, 275 Amp plasma, 8' x 16' table, Burney Phantom Control, 2000

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Kinetic #K1200-HPR130, CNC Plasma Cutter, 9' x 24' table, HPR130 TorchCut Ctrl, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Kinetic #K4000XMC, CNC plasma drilling/milling, 24 side mount tool changer, 8' 8" x10' 8" sheet, #40, Hypertherm XPR300 Hi-Def bevel cutting system, dust collector, thru spindle coolant, 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Koike #BHP, CNC oxygen cutting system, 10' x 24'max cutting, 2-250 IPM, Burny Phantom II CNC controls, retrofit 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Koike Aronson #FM620, plasma cutting, 1000 IPM, Hypertherm EdgePro Ti, 2007, #8816JVP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Koike Hybrid-D11, 6' x 12', 100 Amp, Hyper Therm power source, Oxy/Fuel torch, Semi-Down Draft Table

  Photo
 RFQ
Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

Koike #MG-X3100 Mastergraph, CNC Plasma/OXY Fuel, 12' x 40' table, Hypertherm HPR 260, 2016

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Koike Aronson #MGM-II-3100, CNC plasma cutter, 10' x 40', Hypertherm 400 plasma system, 1 plasma torch, under power, 2012

 
 RFQ
D & S Equipment, Leoti, KS 620-375-2513 (Email: ds.equipment@hotmail.com) Steve Krenzel

Koike #Mastergraph-II-1500, plasma cutting system,6' x 12',Pro Motion CNC,2007

  Photo Spec Sheet
 RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Koike Aronson Mastergraph II #Millennium-1500, 108" x168" table, Kaliburn 275 amp plasma, 1-Oxy, 2013, #30094

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Koike #Mastergraph-Millenium, plasma cut,5' x 20.4',Hypertherm HPR400 XD plasma,'06

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Koike Aronson #PLP-X3100 Plate-Pro Extreme, Oxy Fuel Flame Cutter, 10' x 24', 2-torches, 2017

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Koike #Plate-Pro-2000, 6' x 20'table,torch interface,Hypertherm HPR260,retrofit 2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Koike #ShopPro, 5'x10'water table, Hypertherm Powermax 85 (others avail), new

  Photo PDF icon
 RFQ
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

Koike Aronson #Supergraph-IV, 260 Amp high definition CNC plasma cutter, 6' x 10' table, 2006, #10784

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Koike Aronson #VP72, 6' x 12' plasma table, Koike Hybrid-D11, 1995, #10732

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Koike Plate Fab #XPR300, Truehole, 6' x 12', downdraft table, 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Komatsu #KCR0448, Rasor Plasma Table, 4' x 8', Refurbished 2020

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Komatsu #KCR1251, Burning Plasma, 5' x 10',G9120-II 120 Amp Fine Plasma Unit,1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Komatsu #TFP3051, hi-def plasma, 5' x10', Fine Plasma 150 amp, zoned downdraft table, slag trays, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Equilibrium Machinery, Waukesha, WI 414-534-7512 (Email: anthony@equilibriummachinery.com) Anthony Zenobia

Komatsu #TFP3051, Plasma Table,5' x 10',Factory Refurbished 2020,6 Month Warranty,2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Komatsu #TFP3051 CNC Plasma Table,5' x 10',Fanuc 21-M Ctrl,dust collector,2008

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Komatsu #TFP3062, 150a, 72" x144" table, 1" thick, Fanuc 0i-Mc, 2012, refurbished 2018, S39208

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

L-Tec Plasmarc #PCM-70, portable plasma cutter

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Lockformer #Vulcan-2900, 5' x 10', new Hypertherm, new bearings

  Photo Spec Sheet
 RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: thomas@actionmachineryinc.com) Thomas Cheney

Lockformer #Vulcan-2000, plasma cutting, 5' x 10', S/N 65-008847

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

M.G. #MMIA, 130 amp, 1" thick, 6' x 26' table, automatic height Control, Hypertherm Hpr130, Burny 5, S39568

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

M.G. Messer #Titan-10/4LP, oxy-fuel/plasma system,8' x 24',Navigator II CNC ctrl,2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Machitech Automation #Silver-Cut-HD, 5' x 10' table, Hi-Def plasma system, 2019, #82629

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Machitech #Silvercut-HD, CNC Plasma,5' x 10',Hypertherm XPR170,Only 700 Hours,2019

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Merlin #Pak-15xc, 5' x 10' Plasma Bottom Draft Table, Oxy Fuel, CNC K.N. Arnoson' s Hybrid D-6 Control, 1987

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Messer #5x10SM1006,plasma cutter,Hypertherm Powermax 200,Burny Phantom CNC,'07

  Photo
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Messer #Apollo-8HSG, plasma / oxy cutting system, 8' x 40', Burny Phantom CNC, 1 oxy cutting station

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #EM100-Edgemate, oxygen cutting system, 9.6' x 13', Burny Phantom CNC, 2004

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Edgemate-125, (6) Oxy-Fuel torch hds, 13' 1" btwn rails, Burny Phantom CNC, '05, S39344

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Messer #Gemini-10, 10' x 30',Messer Pilot/Hypertherm Edge CNC Ctrl,dual side drive,2001

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MMPLUS, Hi Def plasma cutting system, 8' x 25' table, Global CNC Control, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Messer #MMPLUS8, 8' x 25', Slagger, Global control & Hypertherm HPR260XD True Hole

  Photo Spec Sheet
 RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: thomas@actionmachineryinc.com) Thomas Cheney

Messer #MMPlus, high definition CNC plasma system, 150 amp, 8' x 25' table, 2009

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Messer #MPC, quad head precision plasma cutting system, 12' x 40', MG Hypertherm Navigator I CNC, Hypertherm HD3070

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC, 14' x 35',(2) 200 amp,(2) 100 amp hydef,Navigator 1 control,2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC, 20'x 22', Navigator II control, (2) HD4070 200 amp HyDef, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC2012, 12' x 20',Navigator ctrl,2 Hypertheyrm 400 amp,2 oxy,@ Arc Writer,'00

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC2012LP, plasma system, 12' x 40' max cutting, Messer Global Control, 24" flat touchscreen, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC2014, quad head precision plasma cutting system, 14' x 35', MG Hypertherm Navigator I CNC, pre-owned, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #MPC2018, 16' cutting width, 26 gauge - 8" thick, (10) Oxy-Fuel heads, 2014, S39230

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Messer MG #MPMM-Multiprocess, gantry style high performance plasma system, 8' x 12', Burny 5E CNC, pre-owned, 1997

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Metalmaster-II, retro plasma cut.sys,6' x 16',Burny Phantom CNC,retrofit'12

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer MG #Metalmaster-II, plasma cutting system, 6' x 25', MG Pilot PC Based CNC, Hypertherm HD3070, 1998 (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Metalmaster-Plus, 6' x 10',CNC fiber laser,1000 IPM,IPG 2600 W fiber laser,2011

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #PlateMaster, dual head plasma cutting system, 8' x 42', Messer Global CNC, Hypertherm HT2000, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #PlateMaster-8, 6' x 13', heavy duty gantry, Messer Global Control, S/N PMR8-12-5580, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Messer MG #Promaster, gantry style high performance plasma system, 6' x 12', Nematron/MG Evolution 1000, pre-owned, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #SM/HD1006P, 6' x 20' HyperTherm Powermax 85 amp

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Messer MG #SM1006, gantry style plasma system, 6' x 20', CMC Burny 2.8 CNC, Hypertherm MAX 100D, pre-owned, 03/1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Steel-Pro plasma cut.sys, Messer Global CNC,left hand floor mtd pwr track,'04

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #TMC4512, CNC plasma/oxygen cutting system, 12' x 40' max cutting, Global CNC, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #TMC4512, CNC plasma cutting system, 12.4' x 50', Allen Bradley Bandit IV CNC, Hypertherm HT4000 Master/Slave, 1992

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #TMC4516, CNC plasma/oxygen cutting system,16' x 46'cut,Messer Global CNC retrofit 2008,2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer M.G. #TMC4516, (10) Oxy Fuel heads, 16' cutting width, 2006, S39231

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Messer #TMC4518, beveling plasma / oxygen cutting system, 18' x 20', MG Hypertherm Navigator CNC, Hypertherm HT4400, 2000

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer MG #TMC4520, CNC plasma cutter, 15' x 56' cutting area, Hypertherm HPR260 plasma source, plasma head with infinity rotator, 8 oxy fuel torhc heads, 2005, S39579

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Messer #TMC4520, CNC plasma/oxygen cutting system,20' x 40'cut,Messer Global CNC retrofit 2008,2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan, 12 'x 40',(2) Hypertherm HT2000,new Messer Global control 2012,1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-6/4LP, 6' x 12', MG Hypertherm Navigator I CNC, Hypertherm HT2000, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-6/4LP, 8' x 30',600 IPM,Hypertherm Edge Pro TI CNC ctrl,retrofit

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-10/8L, oxygen cutting system, 10' x 25', MG Hypertherm Navigator CNC, dual hi-lo, RS 232, 1998

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-10/8LP, plasma / oxy cutting system, 10' x 54', MG Hypertherm Navigator II CNC, pre-owned, 2001

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-12/8LP, 12' x 25',MG Hypertherm Navigator CNC ctrl,RS 232 port,1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-12/8LP, plasma/oxy cutting system, 12' W x 50' L cut, 600 IPM, RS 232 port, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-12/10, oxygen cutting system, 12' x 43', Messer Global Plus CNC, dual core processor, heat resistant pkg, 2004

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-II-12/4LP, 12' x 45',Hypertherm HT2000 200 Amp.,1999,retro'08

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-II-12/10, 10 head oxy fuel cutter,Global ctrl,12'x50'cutting area,2010

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Messer #Titan-II-12/10L, oxygen cutting system, 12' x 50' max cutting, Global CNC, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer #Titan-II-12/10L, CNC oxygen cutting system, 12' x 50' cut, 600 IPM, Messer Global CNC Control

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Messer Mig System & Welding, CNC plasma,100 amp,80"x 26'cut table, 1999, tag #60000sbc

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

Miller #625, plasma cutter

 
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

Multicam #10X12(32)6000 Series, 10' x 12', 130 Amps, 2008, #7768

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

MultiCam #3-308P, MultiCam CNC Control, 6' x 20', 130 amp torch, dust collector, 2012

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Multicam #3000 plasma cutter, Hypertherm #Powermax-1650-G3, 5' x 10' table, 2002

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Multicam #3000 plasma cutter, Hypertherm #Powermax-1650-G3, 5' x 10' table, Multicam EZ Control, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Multicam #3000 Plasma Cutter, 5' x 10' table, 1/2"cutting cap., Multicam EZ Ctrl, 2006, #7037

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Multicam #3000 Plasma Cutter, 5'x10'table, Multicam EZ Ctrl, 2001 #7272

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Multicam #6000, plasma cutter, Hypertherm HPR130, 10' x 32' table, 2008

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Multicam #6000, plasma cutting system,10' x 32',130 amp Hypertherm HPR130,2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Ocean #Liberator Oxy Fuel Beam coping machine, 2015

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Otto Arc Systems Otto Arc Sys, 10' x30' table, 120" W, 354" rail length, hi-definition, ProCut3000x9000 dual drive, Hypertherm Mini Edge Connect, 2017

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

PCS #4500EHD, plasma cutting system,10'x48',PCS Version 8 Burny 10 LCD Plus

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

PCS #6500MHB, plasma cutting system,12'x12',PCS Version 8 Burny 10 w/ Wireless Ctrl

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha Whitney #Advantage-612, 6' x 13' plasma cutting system, Hypertherm Edge Pro Control

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #B404, plasma cutting system,4' x 4' table,Starfire CNC Ctrl w/ 10.4" High Resolution Color LCD Monitor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #B408, plasma cutting system,4' x 8' table,Starfire CNC Ctrl w/ 10.4" High Resolution Color LCD Monitor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #B510, Plasma Cutting,5' x 10' tbl,Starfire CNC Ctrl,dual side drive,rugged

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #C404, dual side drive plasma cutting system,4' x 4',Starfire CNC,new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #C404, dual side drive plasma cutting sys,Starfire CNC,tube cutting attach,new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #C510, plasma cutting system,5' x 10',Starfire CNC,ProNest 2019 LT,new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #HD510, dual side drive plasma cutting sys,5' x 10',Hypertherm CNC,new

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Retro Systems #Hornet-HD, 6' x 12' table, HI-DEF, 130 amps, HyperTherm Control, 2010, #81975

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Rhino Cutting Sytem, 6' x 12' downdraft table, Thermal Dynamics Ultra-Cut 400XT, 2018, #84542

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Sector #Prostar-PRS400, CNC Plasma Table,7' x 22',Hypertherm HPR400XD,400 Amps,2009

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Sector Hypertherm #HPR260, 12' x42', 2" cut capacity, Hypertherm H260 power supply, 2 torch hds, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Shop Sabre #4896, plasma cutting system, 48" x 96", Hypertherm Powermac 1650 plasma, Win-CNC controller

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Shop Sabre #Sidekick-8, CNC Plasma Table, Hypertherm PowerMax 125, 2016

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Solar #118-002, Plasma Cutting System, input 230 V., 3 Phase, 42 Amp, 60Hz, 926 KVA, output 100 V., 40 Amp, 40% duty cycle

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Torchmate #4800, CNC plasma cutting, serial #4800-19-858, new, 2019

  Photo
 RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Vernon Tool #MPM4-0342 Oxy Fuel cutting sys,3"-42"dia pipe 5-Axis pipe cutting sys

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Vicon #8000 Dual Twin Drive, 5' x 10' Table, HyperthermMax100 Plasma Cutting System, 2000

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Vicon #HT40C, plasma cutter, 5' x 10' table, dual twin drive, 40 amp Hypertherm, Computer with Vicon HVAC Software, 1995, #7450

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Victory Plasma System #V612, 6'x12' water table, Thermadyne Ultra-Cut 100 plasma, 2009

  Photo
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Victory #XT1020, High Definition CNC Plasma,8' x 20',water table,Thermal Dynamics Ultra Cut 300 Plasma Source,Refurbed In 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Vulcan #2900, 60"x 120"sheet, 1-1000 IPM, 5'x 15'table size, #81348

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Whitney #3400RTC, plasma cutting system, 8' x 5', Fanuc 16P, tool changer, Hypertherm HT 2000 LF plasma power source

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Whitney #3400RTC-60, 40 Ton, CNC punch / plasma fabricating center

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Bass Machinery LLC, Toledo, OH 419-243-2277 (Email: sales@bassmachinery.com) Sales

Yaskawa Hypertherm CNC plasma cutter, 200A plasma,1-1/4"cutting cap.,DX200 ctrl

  Photo
 Visit Dealer's Equipment Listings  RFQ
FMI Trading LLC, Vinton, TX 928-699-9802 (Email: equipmentbuyers@hotmail.com) Frank Friesen

High Definition Plasma / Oxy Fuel Gantry,auto torch height ctrl,12'x40'water tbl

 
 RFQ
Controlled Automation Inc, Bryant, AR 501-557-5109 (Email: sales@controlledautomation.com) Sales Dept.

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
Surplus@SurplusRecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise