Browse:  Machinery Electrical
RSS Blog Surplus Record

WATER JET CUTTING:
COMPLETE SYSTEMS, WATER JET CUTTING

There are 94 listings in this category
Update: Tue, Sep 18, 2018 16:02:49
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

AIM Masterjet #3600, OSAI control, 8' x12', 50 HP, 60000 PSI, 2008  Camera icon PDF icon RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni
ASI Robotic System, 11-Axis gantry water jet router trim cell, Fanuc 15M, 1994  Camera icon RFQ
Industrial Plant Service, Philadelphia, PA 610-521-5080 (Email: Ipsed3@hotmail.com) Ed Joyce
Bystronic #Byjet-Smart-3015, 5' x 10', dual head, only 720 hours, 2011  Camera icon RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Calypso Series #1-Shark, CNC waterjet system, 5' x12' cutting area, 55000 psi, 1999  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Calypso #Hammerhead waterjet, 10' x5', 30 HP KMT 60k PSI pump, refurbished, 1 yr warranty  Camera icon Spec Sheet PDF icon RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy
Calypso #Hammerhead, waterjet, Calypso PC CNC, 50 HP, 55000 psi, 6' x 12' table, 2001  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Calypso #Hammerhead-126 dual head, Calypso Mark IV, 15 HP, 55000 psi, 6' x12' table, 2005  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Calypso Shark 6x12, 55k psi, 50 HP, new CPU, way covers, 6000 hours  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow #1-18-15, 6-Axis low rail gantry type water jet, 240" x 120" x 36" capacity, used, 2009, #C5097  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
Flow #20X-WATERNIFE / 20XD-55, Waterjet/water Knife, 55000 psi, 100 HP, S/N 297-4461, 1997  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Flow #713633-1, Waterjet System, Recently Upgraded Pump And Software, 2005  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Flow Integrated Fly.Bridge #71400, 5'9" x 23'9", 60k PSI intensifier pump, Flow controls, '06  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
Flow #A-Series, CNC waterjet cutting system, 5' x 10', 60 HP, 55000 psi, Allen Bradley 9 Series CNC, 1996  Camera icon Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
Flow #Hyperjet-50 Mach-4 Cutting Machine  Camera icon Spec Sheet PDF icon Video icon Visit Dealer's Equipment Listings  RFQ
Frank Bacon Machinery Sales, Warren, MI 586-756-4280 (Email: sales@frankbacon.com) Sales Team
Flow #IFB, 4' x 8' waterjet, Flowpro control, nesting, 50 HP 60k PSI pump, ball screw drive  Camera icon Spec Sheet RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
Flow #IFB, 6' x12' CNC waterjet cutting machine, 100 HP, 50000 psi, dual intensifiers, '00  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn
Flow #IFB, 55000 psi Hyplex pump with dynamic head, 6' x 12', 2008  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Scott Machinery & Supply Inc, Helena, AL 205-664-9644 (Email: josh@scottmach.com) Josh Taylor
Flow #IFB1005, 2' x4', Paser 4 cut.head, 55000 PSI, 30 HP, Flow PC, Flow 6.0 s/w, #28692  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
Flow #IFB4800, 4' x8', 50 HP, 60000 psi, 2001, #36399  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #IFB6012, 6' x12', 30 HP, 55000 psi, Hyplex pump, Dynamic head, 3940 hrs, 2003  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #IFB6012, waterjet cutting sys, 6' x12', 50 HP, 60000 psi, Flowmaster PC based CNC, '06  Camera icon Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
Flow #IFB6012, 6' x 12', 50 HP, 60000 psi, hopper, 2000, #35523  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #IFB6012, 6' x 12', 100 HP, 87000 psi intensifier, 2007, #36479  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #IFB6012, 6.5' x13', 100 HP, 94000 psi, Flowmaster PC Based CNC Control 2004  Camera icon Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
Flow #IFB6012, 72" x 144", dual intensifiers, 72" X, 144" Y, 7" Z, 55000 psi, 300 ipm, 100 HP  Camera icon RFQ
Pacific Machine Tools LLC, Carlsbad, CA 760-431-3560 (Email: maurycohn@gmail.com) Maury Cohn
Flow #IFB6012, Dynamic, 60k psi, hopper, 9k hrs, latest version of Flow software, exc, '08  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow #IFB6012, Dynamic, 60k psi, Ebbco chiller, additional cutting head fixture, exc, '06  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow Mach 2 1313B, CNC waterjet, 4' x 4', 30 HP 60000 psi SA intensifier, 1200 hours, Ebbco removal system, 2015  Camera icon RFQ Auction item
Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman
Flow Mach 2 2013B, 30 HP, 60000 PSI, 400 IPM, 10' x6.5' x7", Flow Pc control, 2013, Tk-20905  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
Flow Mach 2 2031B, 30 HP intensifier pumps 60k PSI  Camera icon Visit Dealer's Equipment Listings  RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Flow Mach 2 2031B, 6'5" x 10', 30 HP Hyplex prime pump, hopper, 600 hrs, 2013  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow Mach 2 3120B, 5' x 10', 30 HP, 60000 psi intensifier, hopper, low hours, 2014  Camera icon RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow Mach 3 2513B, 4' x 8', 100 HP, 60000 psi, dynamic head, Waterveyor, 2015  Camera icon RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow Mach 3 3020B, Flow Xpert PC based control, 50 HP, 60000 PSI pump, 3170 hours, 2014  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Flow Mach 3 3020B, FLow Xpert PC based control, 50 HP, 60000 PSI, 3780 hrs, water only, '14  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Flow Mach 3 4020, 87k PSI, 13' x6.5', Dynamic cut, Paser 4 cut.head, Media Blaster, 09/15  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow Mach 3 4020B, 6'-1/2' x 13', 50 HP, 94000 psi pump, Dynamic XD 5-Axis, 2700 hrs, 2011  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow Mach 3 4020B, Flowmaster PC control, 13x6.5', 144x72x7", 100 HP, 87k PSI, 2010  Camera icon PDF icon RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni
Flow Mach 3 4020B, Flowmaster control, 13' x6.5', 100 HP, 87000 PSI, 2008  Camera icon PDF icon RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni
Flow Mach 3 4020b, 6' x12', Flow Master CNC, 94000 psi, 100HP, Dynamic cut.head, '11, #28664  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
Flow Mach 3 IFB, 6' x12', 100k psi Hyperpressure pump, Dynamic hd, 2700 total hrs, 2008  Camera icon Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley
Flow Mach 4 2513B, 4' x 8', 5-Axis, 30 HP 60000 psi Hyplex pump, 2011  Camera icon RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow Mach 4 4030C, 10' x13'1", dynamic hd, 87000psi hyperjet inensifier, 500 lb.hopper, '12  Camera icon Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #S-Series, waterjet cutting sys w/Flow 7X 60 HP 55k psi intensifier pump, 1996  Camera icon Spec Sheet Video icon Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy
Flow #SC-6012, 6' x12', 60000 psi intensifier pump, hopper, 4309 hrs., #A5255  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
Flow #SC-6012, 6' x12', 60000 psi intensifier pump, hopper, 6066 hrs., #A5254  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
Flow #WMC2, single cutting head with Dynamic Control - taper minimization, 50 HP Hyplex pump, very good condition  RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: actionky@bellsouth.net) Thomas Cheney
Flow #WMC4020-XD, 78.75" x 157.5" travel, parts machine, not complete, 2010, #22657  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
Flow Stonecrafter, 6' x 12', 50 HP, 60000 psi, hopper, 2007, #35508  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Flow #WMC 4020, 157.5" x 78.75", 6" Z travel, Pacer ECL cutting hd, 50 HP, 60k psi, '10, #29628  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow 6-Axis waterjet sys, 240" x 120" x 36", 60 HP, 55k psi, Siemens control, Flow 7XES pump, '09  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Flow 5-axis Waterjet System, 72" X 96" Travel, 7x Waternife Pump  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
IWM #1313H, waterjet, 4' x 4', 6" motorized Z, 60k PSI intensifier, chiller, spares, 5 hrs  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Jet Edge #612HR, CNC waterjet, 6' x12', 50 HP 60000 psi pump Ebbco removal system 2006  Camera icon RFQ Auction item
Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman
Jet Edge, 6' x 12', 50 HP, 12" Z, 60000 psi, 2008  Camera icon RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve
Marbach Marbajet 1000 Linear 03, 19.7" x 19.7", KMT 30 HP 60000 psi intensifier, 2011  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Maxiem (Omax), 79" x 166" cutting area, 55000 psi, 30 HP, solids removal, 119 hrs, '15, #28337  Camera icon Spec Sheet Video icon RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
Mitsubishi #AKS-X3-612, 144" x 72", 90000 psi, Siemens Simatic HMI control, 2015  Camera icon Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
Mitsubishi Classica #CL3000, waterjet, 5.5' x 10' table, Mits 700 Series CNC, 2-3-Axis  RFQ
MBI Worldwide LLC, Vernon Rockville, CT 860-202-8550 (Email: edfreligh@comcast.net) Edward Freligh
Mitsubishi #MW-X4-2012, water jet X4 series 12' x 20', 2013, #10921  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig
Mitsubishi #MWX-3, 90000 psi, Mits CNC, 90k psi KMT Pro2, 72x144" cut.envelope, '13, #16370  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia
Mitsubishi #MWX4, 6' x 12', 90000 psi, 72" x 144" tvl., 60 HP, 144" X, 72" Y, 9" Z, 2012  Camera icon Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker
Mitsubishi #MWX4-612, 60HP, 90000psi, 6' x12' table, abrasive removal, 1812 hrs, '12, TK-20670  Camera icon Spec Sheet RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury
Mitsubishi #Suprema-DX612, waterjet, 2012, #11213  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig
Mitsubishi Waterjet, 62" x 54" Table, 60 HP, 1775 RP, S/N 2738, 2007  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Multicam #3000, 5' x10', 90000 psi, 60 HP, KMT pump, Ebco closed loop sys, 2011, #26466  Camera icon Spec Sheet RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo
Omax #2040 Maxiem Jetmachining center, 6'7" x 13'10", 81 hours, 2014, #10920  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig
Omax #2652, waterjet, upgraded computer & drives 2011, 20 HP 40k psi pump, 1998  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Omax #2652, CNC waterjet cut.sys, 26" x 52", 25 HP Flow 60k psi intensifier, Cantilever dsgn  Camera icon Spec Sheet Video icon RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: info@westbrook-eng.com) Sales Dept.
Omax #2652, 26" x 52", 30 HP, 50000 psi, chiller, solid removal system, 2004  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Omax #55100, precision jetmachining, Intelli-MAX, 100" X, 55" Y, 8" Z, 30 HP, 60k psi, '14  Camera icon Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey
Omax #55100, 30 HP, 50000 psi, 2004, new pump in 2016  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Omax #55100, CNC waterjet machining center, 126" x 65" table, 40 HP, 180 IPM, only 500 hrs, '14  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro
Omax #55100, 55" x 100" travel, Tilt a jet, 2005  Camera icon Spec Sheet RFQ
Automatics & Machinery Co Inc, Longmont, CO 800-543-7666 (Email: sales@automatics.com) Steve Beck
Omax #60120, 5' x10' precision waterjet, EnduroMax 5060V 50 HP pump, terrain follower, '12  Camera icon Spec Sheet RFQ
Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman
Omax #80160, 80" x 160", Omax 30HP pump, 600 lb.Hoppper, free s/w upgrades, reconditioned '03  Camera icon Spec Sheet RFQ
Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman
Omax #80160, waterjet cutting sys w/Tilt-A-Jet taper compensating head, 40 HP  Camera icon Spec Sheet PDF icon Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy
Omax #80160, PC-based control, 2003, $30k  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Omax #F1530, 50000 psi, 5' x10' capacity, 30 HP, Omax PC Based CNC control, 2015, #C5108  Camera icon Video icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
Omax #Mach-4C, flow dual head bridge, 5' x 10' capacity, #C5111  Camera icon Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes
Omax #Maxiem-L1530, 5' x10', 30 HP 50k psi M30 pump, 500 lb.abrasive hopper & chiller  Camera icon Spec Sheet PDF icon Video icon RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy
Par Vector, 6' x10', 5-Axis, KMT SL-V 50 HP intensifier, Cimroc 5/21 control, 2005  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Semyx Optima #320, 178" x 110" x 75", 60000 psi, 2014  Camera icon Spec Sheet RFQ
Pioneer Machine Sales, Katy, TX 479-651-3683 (Email: chancy@pioneermachinesales.com) Chancy Cockrun
Techni Intec #612, waterjet, PC based CNC, 66 HP, 66000 psi, 6' x12' cutting area, 2010  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Techni Intec #I612-G2, waterjet, AM2000 CNC, 55000 psi, 73" x 145" table, 2016  Camera icon RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan
Techni #TJ3000-X2, 5' x 10' cutting area, 2011  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Techni #TJ4000-X3, 6' x 12', 40 HP, 2013, #35816  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.
Techni #TJ4000X3, 144" x 72", 53000 psi, 700 IPM, 2013  Camera icon Video icon RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg / Mark
Techni #i510, waterjet cut.sys, 5' x10', Quantum 55S Servo pump, full CAD/CAM nesting pkg  Camera icon PDF icon Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy
Techni #i510-G2, 5' x 10' waterjet cutter, 2017, #3075  Camera icon Spec Sheet RFQ
Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad
Ward Pro recycling unit, 2012, new cost 80k  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman
Wardjet #Z613, dual head, 78" x 156", 50 HP, 60000 psi, Burny CNC, 4500 hrs, ready to work, '07  Camera icon Spec Sheet Video icon RFQ
Centra Corporation, Perry Hall, MD 443-317-8414 (Email: ed@centracorp.com) Ed/Mike/Thomas
Wardjet #Z3043, CNC waterjet cutting, 60000 psi, 10' x14' cut area, 100 HP, 2015  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn
Wardjet, CNC waterjet system, 50 HP, 6' x12' cutting area, 2007  Camera icon Spec Sheet Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: mvollman@hgrinc.com) Jon Frischkorn

Back to category listings.


Photo icon = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    camera icon = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise