Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record

SHEARS, POWER SQUARING & PLATE (GAUGES)

Sterling Machinery Over 60 years of Service
There are 153 listings in this category
Update: Mon, Apr 19, 2021 18:03:43
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

20 ga. x 4' Central #RBS-4820, hand-roll & brake & shear machine, 2"roll dia., stand, #5262HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

18 ga. x 4.3' Nelson #NFS-200005, pneumatic shear,air operated,24"front supp. arms

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

18 ga. x 6' Famco #E-12143, electric mech clutch,operator foor pedal,sliding BG,#16076

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

18 ga. Wysong #A96, air shear, LH sq.arm, (3) FA supports, ROMBG, tag #14817

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

18 ga. Wysong #A144, air shear, (2) FA supports-broken & repaired, tag #14818

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

16 gauge Pexto #PH452, power squaring shear, 28" rear operated manual back gauge, heavy duty foot switch, 2 HP, 1990, #29005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

16 ga. Stamco #848, Mechanical Power Squaring Shear, 24" Precision ROMBG, Tag #12177

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

16 ga. x 2' DiAcro #24, power shear, electric, single & continuous modes, good condition, rare

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

16 gauge x 2' DiAcro #24, power shear

 
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Jonathan Peterson

16 gauge x 4' DiAcro #48, mechanical power squaring shear, 20" hand operated rear back gauge, remote foot switch

  Photo
 Visit Dealer's Equipment Listings  RFQ Auction item
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

16 ga. x 4' DiAcro #48PWR, mechanical power shear,18"FOBG,electric foot switch

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

16 ga. x 4' Edwards, Shear, Pedicut 600

 
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

16 ga. x 4' National #NH5216, cast iron side frames, steel cutter heads & tables, front supports, 3 HP, new, #SMNH5216

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

16 gauge x 4' Niagara #TP Tomahawk Series, (1) set extra blades, remote electric foot switch, AAMC, 1980, Tag #16225

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

16 ga. x 4' Tennsmith #A52, shear, air operated, 2002

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

16 gauge x 4.4' Tennsmith #H5215, hydraulic, manual back gauge, 2 front sheet supports, 3 HP

  Photo Spec Sheet
 RFQ
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

16 ga. x 4' Tennsmith #52, Foot Shear, 30" back gauge range, 37" front gauge range, 54" x 26" dimensions

  Photo
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

16 gauge x 4.4' Tennsmith #A52, air shear, Back Gauge, 2-support arms, S/N 018-4, #84782

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

16 gauge x 4.4' Tin Knocker #TK-H1652, hydraulic, squaring arm, 30" Back Gauge, front supp. arms

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

16 gauge x 4.4' Wysong #H-52, hydraulic sheet metal shear, 27" manual back gauge, 3 HP, 1980

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

16 gauge x 4.4' Wysong #H-52, 3 HP, 1800 RPM, 1979

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

16 gauge x 6' Red Bud, Hydraulic Cut-off Shear

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Jonathan Peterson

16 gauge x 10' Tennsmith shear, $8999.00

  Photo
 Visit Dealer's Equipment Listings  RFQ
HGR Industrial Surplus, Euclid, OH 888-390-2234 (Email: JPowell@hgrinc.com) Sales Rep.

14 ga. Niagara #18, mechanical shear, manuel back gauge, foot treadle

 
 RFQ
Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

14 gauge x 3' Niagara #23, 8 holddowns, 60 SPM, 24" rear operated manual back gauge, front support arm

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

14 gauge x 4' Cincinnati #1004-R, power shear, 36" rear operated manual back gauge, 5 HP, 65 SPM, #6889P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

14 gauge x 4' Edwards #2.5/1250, electric, 11 holddowns, 60 SPM, 24" rear operated manual back gauge, front support arm

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

14 ga. x 4.4' Wysong #H-1452, hyd, remote foot pedal, hold downs, no BG, 1984,#10262

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

14 gauge x 4.4' Wysong & Miles #1452, 20" rear operated manual back gauge, 8 hold downs, 80 SPM, 1.5 HP, (2) stock support arms, #28280

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

14 gauge x 5' Edwards TruCut #2.5/2000, mechanical shear, 5.5 HP, 50 SPM, foot pedal

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

14 ga. x 6' Accurshear #61356LAM, hydraulic power shear,10 HP,no BG,2004,#7716XJVP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

14 ga. x 6' Parker, Shear, 3 ph.,440 V.

  Photo
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

14 ga. x 6' Pexto #14-U-6H, mechanical shear, 24"BG, 12 hold downs, 3 supp. arms

  Photo
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

14 ga. x 6.8' Edwards Truecut #2.5/2000, mechanical shear, 5.5 HP, 50 SPM, foot pedal, floor standing, #13910J

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

14 ga. x 8.4' Birmingham #H10014, deluxe hydraulic, (2)14"side gauges, 24"BG, 22 SPM, 5 HP, new, #SMH10014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

14 ga. x 10' Primeline #M1014, Power Squaring Shear,35 SPM,4.5 HP,40" squaring arm,30" BG

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

14 gauge x 10' Tennsmith #LM1014, mechanical shear, 18 gauge Stainless Steel

  Photo
 Visit Dealer's Equipment Listings  RFQ
Bud's Machine Tools, Murray, UT 385-271-6718 (Email: megan@budsequipment.com) Megan Poulsen

14 gauge x 10.2' RAS #52.31, shear, 34 SPM, 4 HP

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

12 gauge x 2.6' Feldman hydraulic shear, no back gauge, serial #1816

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: hcii@comcast.net) Terry Blackman

12 ga. x 3' National #NH3612, cast iron side frames, steel cutter heads & tables, foot switch, 3 HP, new, #SMNH3612

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

12 gauge x 3.4' Lodge & Shipley #CT40, power squaring shear, 24" front operated back gauge, 1.5 HP, 120 SPM, #73235

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 gauge x 3.4' Lodge & Shipley #2CT40-AB, 120 SPM, 18" Vernier pin ga, 24" front operated manual back gauge, 1975

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
A Green Co Inc, Worcester, MA 508-791-6800 (Email: sales@agreenco.com) Harvey Green

12 ga. x 3.4' Lodge & Shipley #2CT40i, high speed power squaring shear, 24"BG, 120 SPM, 5 holddowns, 1.5 HP, 1978

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

12 ga. x 4' National #NH5212, hydraulic, double acting cylinders, ROMBG, 3 HP, new, #SMNH5212

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

12 ga. x 4' Pexto #12-U4-F, mechanical power squaring shear,18"ROBG,3 HP,#11056

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

12 gauge x 4' Whitney #5212, shear, 24" rear operated manual back gauge, 76 SPM, squaring arm, t-slotted bed, #160140

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

12 gauge x 4' Wysong #1252, power shear, rear operated manual back gauge, square arm, front supports, #6054HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12 ga. x 4' Wysong #1252, ROMBG, 42"sq.arm, 2-front supports, 1-shot lube, foot pedal

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

12 gauge x 4' Wysong #1252, power shear, 8 holddowns, 80 SPM, 48" rear operated manual back gauge, electric foot pedal, front support, one shot lube, #A6378

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

12 gauge x 4' Wysong #1252, power shear

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

12 ga. x 4.4' May Tool #MTC-52H, Stainless rotary shear,14"throat,1-1/2 HP,'94,#69424

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

12 gauge x 4.4' Roper Whitney #5212, mechanical shear, 24" rear operated manual back gauge, 8 hold downs, e-stop

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

12 ga. x 4.4' Wysong #1052, air clutch, bow tie blade

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

12 ga. x 4.4' Wysong #1252, mechanical shear, 60 SPM, 3 HP, S/N P13-1505, #5687

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

12 ga. x 4.4' Wysong & Miles #1252, mechanical hold downs, 3 HP drive motor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

12 ga. x 4.6' Famco #16-S-7, S/S hi-speed shear,56"width,A/C,for cut-to length line

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: jdgaston@msn.com) Jim Gaston

12 ga. x 5' Wysong #1260, 7.5 HP, mechanical shear, #2053

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Holland Equipment Hunters Inc, Hamilton, MI 269-751-5169 (Email: mnyhof@hollandequipment.com) Mike/ Mitch

12 gauge x 6' Famco #1272, 85 SPM, 24" manually operated Back Gauge, foot pedal, 5 HP

  Photo
 RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

12 gauge x 14' Cincinnati #1014, mechanical power squaring shear, 65 SPM, front operated power back gauge, #13844

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

11 ga. x 4' Darley #S1204, 40" sq. arm, 230/460 V., 3-ph, FOPBG, in/mm, 1987, #157324

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 ga. Cincinnati #135X6, hydraulic shear, serial #44020, #6318HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. Niagara #610, ROMBG, LH Sq Arm, New 1948, From Service, Tag #15228

 
 RFQ
Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

10 gauge x 3' Niagara #636, s/n #28882

  Photo
 RFQ
Johnstown Specialty Castings, Inc., Johnstown, PA 814-330-7034 (Email: mstahl@jscastings.com) Mark Stahl

10 gauge x 4' Cincinnati #1004-R, 24" front operated power back gauge w/readout, 5' sq arm, 5 hold downs, 5 HP, #28319

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10 ga. x 4' Cincinnati #1004-R, 36"back gauge, power shear, serial #34974, #6625P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 4' Edwards #3.25/1250DD, electro-mechanical,24"manual back gauge,1990

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

10 gauge x 4' Herr Voss #2CT48, power shear, 120 SPM, air clutch & brake, manua back gauge, one shot lube system, electric foot pedal, 3 HP, #9219P

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 4' Niagara #1R4-10, 36"FOBG,8'sq.arm,(2) 26"front supports,75 SPM,elec foot trip

  Photo Spec Sheet
 RFQ
Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

10 ga. x 4' National #NH5210, hyd., pilot operated pressure relief valve, 25 SPM, 5 HP, new, #SMNH5210

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 gauge x 4' Pexto #10-U-4B, 5 HP, 62 SPM, 24" rear operated manual back gauge, 32" squaring arm, (2) 26" front support arms, 1972, #160553

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 gauge x 4' Reliance #CS5273, rack & pinion feed for tailstock, set of legs, 1.5 HP, #A6162

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 ga. x 4' Wysong #1048, shear,24"ROMBG,4'squaring arm,full length foot treadle,60 SPM,1964,#157498

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 gauge x 4' Wysong #1052, power shear, 36" rear operated manual back gauge, squaring arm, 5 HP, 60 SPM, #8208HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 gauge x 4' Wysong #1052, power shear, 36" front operated power back gauge, 5 HP, 52" cut length, 60 SPM, #8842HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 4.3' Pexto #G352C, 19" gap, 12 HP, mechanical shear

 
 RFQ
Pennsylvania Equipment Inc, Grove City, PA 724-458-6162 (Email: paequip@zoominternet.net) Thomas Noone

10 ga. x 4.4' Saber #H-5210, hydraulic, rear-operated manual back gauge, sheet supports

  Photo Spec Sheet
 RFQ
A R Tools & Machinery Inc, Spokane, WA 800-222-3152 (Email: Wayneh@artools.com) Wayne Hoff

10 gauge x 4.4' Wysong #1052, power squaring shear, 36" front operated power back gauge, 6' RH squaring arm

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Central, Louisville, KY 502-648-3636 (Email: centralmachinery20@gmail.com) Denis Frankenberger

10 gauge x 4.4' Wysong #1052, power squaring shear, 36" front operated power back gauge, 6' sq arm, Bijur lubrication

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

10 gauge x 5' Betenbender #5-125, 13 holddowns, 36" front operated power back gauge, 4' squaring arm w/ inlaid scale, 35 SPM, #A6083

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 gauge x 5' Secrest, mechanical shear, 10 HP AC motor, air cooled & brake

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Midwest Machinery LLC, W Bloomfield, MI 248-626-0200 (Email: sales@midwestmachy.com) Mike Rybak

10 ga. x 5' Betenbender, hydraulic shear, 36"BG, 13-holddowns, 10 HP, 35 SPM, 1988

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

10 ga. x 5' Tennsmith #LM510, power shear

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Federal Equipment Div, Ronkonkoma, NY 631-467-9400 (Email: sales@federalequip.com) Ron Shuster

10 gauge x 6' Chicago / Dreis & Krump #UA6135, hydraulic shear, S/N DS1619

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Jonathan Peterson

10 ga. x 6' Cincinnati, auto, 3 probe sensors, pwr off-load conveyor, FOPBG, #10613

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

10 gauge x 6' Cincinnati #135HS, hydraulic power shear, 60-85 SPM, 8 holddowns, 36" Back Gauge, front operated programmable digital micro computer, #A6219

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 gauge x 6' Cincinnati #1006R, 75" BH, power squaring shear, front operated power back gauge, 7.5 HP, #159086

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 gauge x 6' Cincinnati #1006R, power shear, 36" front operated power back gauge, 5 HP, 65 SPM, #7348HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 6' Cincinnati #1006R, power shear,75" BH,36"FOPBG w/indicator,5 HP,sq.arm,65 SPM,auto lube,#8416JVP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 6' Cincinnati #1006R, FOPBG, 65 SPM, 7.5 HP, s/n #31118, 1968, #154994

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

10 gauge x 6' Cincinnati #1006-R, power back gauge, squaring arm, 1978

 
 RFQ
Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

10 ga. x 6' Cincinnati #1006R, mechanical power shear

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

10 ga. x 6' Niagara #1R6, mechanical, 36"power back gauge, 1978

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

10 ga. x 6' Niagara #56-B, mech shear,6'2-1/2"blade lgth,24"BG,75 SPM,S/N 50783,#5730

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

10 gauge x 6' Wysong #1072, mechancial power squaring shear with front & rear gauging systems, remote foot switch, 12 hold downs, 5 HP

  Photo
 Visit Dealer's Equipment Listings  RFQ Auction item
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

10 gauge x 8' Betenbender #8-10GA, shear, 32 SPM, 76" front operated power back gauge, 2007, #160082

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 gauge x 8' Betenbender #8-10GA, hydraulic, 36" digital back gauge, inch/metric, square arm, power rake, 2007, #10645

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

10 ga. x 8' Cincinnati #1008M, power shear, serial #32K06, 1973, #6260HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 8' Darley #S2504, hyd.,102"BH,13 holddowns,pneu.sheet support,1987,#82229

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

10 gauge x 8' Darley #S2550, hydraulic shear, 13 holddowns, 31 SPM, 42" front operated power back gauge, foot pedal, 1989

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

10 gauge x 8' Roper Whitney #10H8, hydraulic shear, 36" Back Gauge, 48" squaring arm, 32" front arm supports, 1987

 
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 ga. x 8' Wysong & Miles #1096, mechanical shear, 10 HP, good condition

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

10 gauge x 10' Accurshear #613510, hydraulic shear, front operated power back gauge, foot operated, 1989, #1172

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blackstone Machinery, Cerritos, CA 562-832-6823 (Email: andrew@blackstonemachinery.com) Andrew Mendez

10 ga. x 10' Atlantic shear, 32"/39"BG, 40"sq.arm, 15 HP, 10-25 SPM, s/n 65111, 1983

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

10 ga. x 10' Birmingham #H-1035, hydraulic rake angle adjustment, front supports, ROMBG, 10 HP, new, #SMH1035

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 ga. x 10' Cincinnati #135HSx10', shear, 12 hold downs, 38-70 SPM, 15 HP, #13399

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

10 gauge x 10' Cincinnati #1010, right sided squaring arm, 24" rear operated manial crank back gauge

  Photo Spec Sheet
 RFQ
Action Machinery Inc, Louisville, KY 502-459-1313 (Email: thomas@actionmachineryinc.com) Thomas Cheney

10 gauge x 10' Cincinnati #1010, mechanical shear, 24" front operated power back gauge, 11 holddowns, automatic lubrication

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

10 gauge x 10' Cincinnati #1010, mechanical shear, 123" between housing, 36" front operated power back gauge, 65 SPM, S/N 31411

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 520-836-9727 (Email: machine@petersonmachinery.com) Jonathan Peterson

10 gauge x 10' Cincinnati #1010, 123" between housing, 65 SPM, 5 HP, 36" Back Gauge, foot treadle, 1954

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

10 gauge x 10' Cincinnati Inc #1010, Mechanical Shear,120" squaring arm,48" power back gauge

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

10 ga. x 10' Cincinnati #1010, mechanical shear, 10' squaring arm, 36" front operated power back gauge, automatic shear probes, rear sheet supports, 1971, #10230

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

10 gauge x 10' Cincinnati #1010, mechanical, 5 HP, 65 SPM, 11 holddowns, front operated power back gauge, 1974, #159159

  Photo Spec Sheet
 RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 ga. x 10' Cincinnati #1010, mechanical shear, 24" ROMBG,5 HP,65 SPM,S/N 20732

  Photo Spec Sheet PDF icon
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

10 ga. x 10' Cincinnati #1010, power squaring shear

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & G Press & Machinery Sales, Fraser, MI 586-563-5000 (Email: sergio@presses.com) Sergio Gasperoni

10 ga. x 10' Cincinnati #1410, mechanical power squaring shear, 36" BG, 11 hydraulic hold downs, 60 SPM, 7.5 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

10 ga. x 10' Edwards Pearson #3.5/3000, 24"manual back gauge, electro-mech.

  Photo Spec Sheet
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

10 gauge x 10' Elga, 14" throat, 13 hydraulic holddowns, squaring arm, front operated power back gauge, foot pedal, #A6414

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

10 gauge x 10' Famco #10H10, hydraulic shear, 36" front operated power back gauge, programmable digital read out, inch/metric, automatic lube system

  Photo Spec Sheet
 RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

10 gauge x 10' Komatsu #C4X3100, hydraulic shear, 1982

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

10 ga. x 10' Niagara #1R-10, air actuated clutch,24"FOMBG,5'sq.arm,5 HP,#28028

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10 gauge x 10' Niagara #610, metal shear, 24" rear operated manual back gauge, 22 hold downs, 65 SPM, #28606

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10 gauge x 10' Niagara #610, power squaring shear, 24" manual Back Gauge, 5 HP, 1956, #73801

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 gauge x 10' Niagara #610, mechanical, 24" manual back gauge

  Photo PDF icon
 RFQ
Weaver Metal Working Machinery LLC, Lititz, PA 717-625-0302 (Email: wmm@ibyfax.com) Daniel/David Weaver

10 ga. x 10' Niagara Spartan #SP10-10, hydraulic shear,sq.arm,2 HP,17 SPM,#69124

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 gauge x 10' Pearson #1018TX, 4" throat, 25 SPM, 30" precision power operated back gauge, 7-1/2 HP, #016583

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

10 ga. x 10' Pexto #10U-10A, ROPBG, 24" FOPGB, sq.arm, 60 SPM, 7.5 HP, 1964, #153549

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10 ga. x 10' Wysong #1010, shear

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Victory Machinery Exchange, Lake Forest, IL 847-918-9797 (Email: sales@victorymachinery.com) Neal Hoffenberg

10 ga. x 10' Wysong #1010, mech shear,16 holddowns,60 SPM,S/N P32-1786,#5686

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

10 ga. x 10' Wysong & Miles #1010, power squaring shear, 24" front operated manual back gauge, FOMBG, 12 hold downs, 7-1/2 HP, 60 SPM, #72950

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

10 gauge x 10' Wysong #1010, mechanical, 36" FOPBG, 7.5 HP, 1800 RPM, 60 SPM, #5587

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

10 gauge x 10' Wysong #1010-HM, squaring shear, /N HMS7-113, #016755

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

10 gauge x 10' Wysong #1010-RD, metal shear, 24" front operated manual back gauge, 16 hold downs, 60 SPM, #28552

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

10 gauge x 10' Wysong #1010-RD, 24" front operated manual back gauge, 10' squaring arm, 1960

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

10 gauge x 12' Cincinnati #1012, 7.5 HP, 30" rear operated manual back gauge, extra set of blades

  Photo
 RFQ
Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Email: dmtool@comcast.net) Frank Dieveney

10 gauge x 12' Cincinnati #1012, Automec CNC front gauge, front operated power back gauge, 13 hydraulic holddowns

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
SMF & Machine Tools Inc, Little Rock, AR 800-643-5839 (Email: roger@smfmachine.com) Roger Huntsman

10 ga. x 12' Cincinnati #1012, power shear,ROMBG,squaring arm,65 SPM,7.5 HP,#8425P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

10 ga. x 12' Cincinnati #1012, mechanical, 123" BH, 36" front operated power back gauge, squaring arm, stacking conveyor, 1974

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

10 gauge x 12' Cincinnati #1012, mechanical shear, stacking conveyor, 36" front operated power back gauge, 38" magnetic sheet supports, 1974

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

10 gauge x 12' Cincinnati #1012, mechanical shear, 65 SPM, (2) front support arms, S/N 21177

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

10 ga. x 12' Cincinatti #1012, Shear, 1970

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

10 gauge x 12' Wysong, mechanical plate shear, 36" front operated power back gauge, 10' squaring arm, (2) 2' arm supports

 
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

10 gauge x 16' Cincinnati #1816G, meachanical power squaring shear, 48" BG, 60 SPM, 17 hydraulic hold downs, 10 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

9 gauge x 10' Macsher #3060-04, mechanical power squaring shear, new, 2020

  Photo Spec Sheet Video icon
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

6 ga. x 6.5' Darley #S2000X4, hydraulic shear, 3-phase, 1987, #156823

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

Cincinnati shear blades, 52"long x 2-7/8"wide x 7/8"thick (2), #7992

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 54"long x 2-7/8"wide x 7/8"thick (3), #7989

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 54"long x 2-7/8"wide x 7/8"thick (2), #7990

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 54"long x 2-7/8"wide x 7/8"thick (2), #7991

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 76"long x 2-7/8"wide x 7/8"thick (2), #7986

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 102"long x 2-7/8"wide x 7/8"thick, #7987

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Cincinnati shear blades, 102-1/4"long x 2-7/8"wide x 7/8"thick (2), #7983

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Wysong & Miles #1096, 24" ROMBG, squaring shear

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Yangli #QC12Y-12' X3200, power squaring shear, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro Damino

Back to Machinery & Machine Tool listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise