Used ROUTERS, CNC - CNC MACHINERY & EQUIPMENT For Sale

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Machine Central LLC, Denver, CO 303-632-8818 (Email: machinecentral@comcast.net) Andy Weiss

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

520 Machinery West, Phoenix, AZ 602-501-8995 (Email: Info@520machinerywest.com) Cris Mulvihill

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Arlington Machinery, Elk Grove Village, IL 773-692-0733 (Email: sales@arlingtonmachinery.com) Sales

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

CNC MACHINERY & EQUIPMENT:ROUTERS, CNC

Anderson #NC-3116TC, 3-Axis CNC router, 5' x 10'table, 2 router heads, 1000-18000 RPM, (2) 16 ATC, Fanuc 180i-MA, 2000

Anderson Mass #1540-IP, 181.1" X, 82.67" Y, 47.24" Z, 18k RPM, HSK-63F, Fanuc 31iMB5

Andi Anderson, 5' x 10' table, 8 position ride along tool changer, boring block, 3 phase

ATI #404CM, 4-Spindle high speed CNC router/circuit board drill

Automation Technologies #KL-1212, 4' x4' router, Mach 3 Control, 48x48x8", 15HP, 24k RPM, T slot & vacuum table, rack and pinion, 2016

Busellato #JET7000-XL, CNC working center router, 2001

Buselleto #Jet-4WF-XL, CNC fixed table moving gantry router, 5' x 12', 145.5" X, 61" Y, 7.9" Z, 16 HP, 24000 IPM, 10 pos, tool changer, 20 vertical & 6 horizontal spindles, Windows PC, 2004

C.R. Onsrud #288G12 Panal Pro 3-Axis CNC moving gantry router, 31.5' x 5'

C.R. Onsrud #F194E24 5-Axis Extreme Series, Fanuc 31i-B5, 60" x194" table, 24k RPM, 2015

CMS #Ares, 5-Axis, 2018

CMS #MBB3T/700-TX3, 303.14" X, 126.37" Y, 20.47" Z, 24000 RPM, Fanuc 31i-B5, 2014, #C5146

Custom Machine Manufacturing #250, CNC Router, monitor, flat keyboard, friendly interface software, self-centering clamps, servo control system, 1999, #5958

Dynamotion / ATI #421M, 4-Spindle high speed CNC router/circuit board drill

ECCO #1900 Series CATC, Syntec Controller CNC Router, 6² x 13' cutting capacity, 73" X, 158" Y, 12" Z, 24000 RPM, mist cooling systeym

Elmar Wessel #LBA805, CNC circuit board drill/router, 1450 RPM, single spindle, like new

KMT Robotics #KMT-Robotrim, CNC twin robotic 7-Axis router, (2) 3' x 6' fixture tables, (2) 3 HP trim routers mounted on Fanuc robots, tool changers, very fast trim routers, 2012

Komo #Innova-VR408, Mach I 3-Axis CNC router fixed bridge, 4' x 8', moving table, 12 HP, 6000-18000 RPM, 8 position tool changer, Quincy vacuum pump, GE/Fanuc 21 CNC, 1998

Komo #Mach-One-GT624, CNC large format router, Fanuc 0i-MB, 72" x 280"table, 280"X,100"Y,10"Z, 24000 RPM, 2010

Komo #VR510, high speed CNC router, 5'x10'table, 10 pos tool changer, 24000 RPM spindle, 15 HP, HSK 63, Fanuc 210i CNC, 2006

Komo #VR512, Fanuc OM,144x60",145x84x6",(2) 8-pos ATC,6k RPM,CT40,dual spdls,'98

Komo #VR530 TG Mach III, 3-spindle, 325" X, 114" Y, 24000 RPM, 12 sta.ATC, GE Fanuc i, 2006, #27949

Komo #VR805Q, 3-axis, 4 router heads, 12.5 hp each, 4 drill heads, 162" x71.5" x9", vacuum, chuck, OMC controls

Komo #VR824TG, CNC router, GMF 16M, 18000 RPM, 5 heads, 306"x 96"table, #25757

Komo #VR508, CNC Router, 2002

Komo #VR508, CNC Router, 208/240 V., S/N I850096, 1996

Komo #VR512-Mach-II, Router, 1800 RPM Spindle, 8 ATC, 145" X, 84" Y, 9" Z, GE Fanuc 210i-M Control, tool holders, 40 HP Vacuum Pump, 2001

Komo Router, 684"X,64"Y,24k RPM,Fanuc i CNC,(2) 12 sta. tool changer,retrof.'16,#30364

Laguna #MCNC Swift CNC Router, 4' x 8', Laguna Handheld Control, 3HP ER-20 24K RPM, vacuum table, Becker SV4009 HP Vacuum Pump and Dust Hood, 2019

Motion Master #5X10, 3-Axis CNC Router, 5' x 10', 10.5 HP, 24000 RPM, CAT40, air cooled, Siemens Control, 2001

Multicam #1204R, CNC Router System, 5' x 10', 7.5 HP, dust collector, Multicam CNC Pendant controller, 17 HP 2 Stage vacuum pump, 2015

Multicam #3-103-R, router,50"x100"tbl,5 HP,32k RPM,EZ Control Multicam CNC,2015

Multicam #3000 Series 3-103-R, EZ,50"x100"tbl,32k RPM,6-pos. ATC, mist,'15,#45310

Multicam #3000-3-304-R CNC Router, 80" x 122" work area, 25000 RPM, Multicam CNC Control, 20 HP Dekker Vacuum System, 2005

Multicam #5204, 120"x60"tbl., 100"X,50"Y,16"Z, 24k RPM, 10 HP, ER32 collet, vacuum tbl

Multicam #M3000, 5'x10'tbl,120"X,60"Y,6"Z,24000 RPM,vacuum,clnt mist sys,pendant,2010

Multicam #MG204, CNC Router, 60" x 122" table, Multicam CNC controller, 7.5 HP Colombo router head, vacuum table

Multicam #MG204, 5'x10'tbl., 7.5 HP colombo hd, 25 HP vacuum tb, 2000, #159230

Multicam #MG305, 6'x12'tbl., 5 HP colombo hd, 25 HP vacuum tb, 2000, #159229

Multicam #MG305, CNC Router, 6' x 12', Multicam CNC controller, 5 HP Colombo router head, vacuum table, 25 HP Baldor blower, 2000

Onsrud #122HD18, 3-Axis CNC router, (2) 5' x10' tables, 24000 RPM, Osai CNC Control, (2) 12 Station ATC, 2009, #30756

Powermatic 5-Axis router, Fanuc 15M control, 5' x 20' table, 24" wide x 28" deep control cabinet, #32890

Quintax #Q5H, 5-Axis, (2) 6' x10' tables, 59" Z, 21000 RPM, 40 HP, 20 ATC, probe, Fagor 8070 CNC, 2009

SCM #Pratix-N15, 5' x12' table, KSK63 Electro spindle, 24000 RPM, boring spindles, bar type tool changer, Becker vacuum pump, 2009

SCM #Routech-Record-250, 3-Axis CNC router, (2) 5' x5' tbls, 40 HP vacuum pump, transformer, 1998

Shoda #NC163, router, Fanuc 15M, (4) 750 watt drills, (4) 12 KW routes, 7.5 KW vacuum pump, 1991

Shoda #NCW516-1646, router, Fanuc 15M, (2) 750 watt drills, (2) 12 KW routes, dual table machine, 1990

Techno #4896HD, 48"X,96"Y,9"Z, 3-Axis, CNC router, HSD Series, 2014, #16412A

Thermwood #40, 60" x 60" table, 6"Z, 5/8" collet, 15000 RPM, Series 91000 CNC, 1995

Thermwood #40, CNC, 60"x60" tbl.,70"X, 64"Y, 8-1/2"Z, 2 spdl.,15000 RPM, Gen2 XP, 1998

Thermwood #5X10, CNC Router, 5' x 10' table, QCore Control, bar style ATC, 12 HP, 3000-24000 RPM

Thermwood #C40, 4-Axis router,5'x10'tbl,126"X,73"Y,8.8"Z,91000 Super ctrl,2000

Thermwood #C40, 91000 control, 4x8', 15 HP, 18000 RPM, 8 tool turret, 2001

Thermwood #C40, 3-Axis CNC router, moving table style, 60" x 60"table, 70"X,65"Y,10"Z, 3000-15000 RPM, 91000 CNC, 1999

Thermwood #C42, 3-Axis CNC router w/dual 5' x5' tables, 60" X, 120" Y, 6" Z, 10 HP, 18000 RPM spindle, tool changer, vacuum pump, CNC upgraded to Gen 2, 2000

Thermwood #C53, CNC router,60"X,120"Y,6"Z,10'x5'table,18 HP,24000 RPM,1996,#7469

CNC MACHINERY & EQUIPMENT:
ROUTERS, CNC