Browse:  Machinery Electrical
RSS Linkedin Instagram Blog Surplus Record

CNC MACHINERY & EQUIPMENT:
PUNCHES, TURRET, CNC

Nationwide Transport Services Nationwide & International Machinery Shipping
There are 241 listings in this category
Update: Sun, Nov 17, 2019 00:33:42
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

19 Ton, Trumpf #TruPunch-1000, Bosch PNC-P, 50" x 80", 15 tool, multi-shear, '07, #23092

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

19 Ton, Trumpf #TruPunch-1000, CNC punch press, 2006, #11486

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

19 Ton, Trumpf #TruPunch-1000, CNC turret punch, 50" x 80" sheet, Bosch control, 2006

 
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

19 Ton, Trumpf #TruPunch-1000, CNC turret punch, 50" x 80" table, Bosch PNC-P CNC, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

20 Ton, Amada #Aries-245, 18 station, 2 A/I, 39.37" x 50" sheet, 3.5" hole, Amadan 04PA, 1988

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

20 Ton, Amada #Aries-245, Amada 04PA CNC, 20 station, 2 A/I, thick, very good, 1990, #8178

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

20 Ton, Amada #Vipros-255, CNC turret punch, 31 stations, Fanuc 18-P CNC Control.

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

20 Ton, Trumpf #TruMatic-2010R, CNC turret punch, 55" x 50" table, 12 station ATC

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

20 Ton, Trumpf #TruPunch-3000, CNC elec.punching machine, 18 sta, 50" x 100", 2011, #10963

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #AE255NT, CNC turret punch, 51 turret stations, 50" x 59" working surface, Fanuc NT, 2017, #7429

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

22 Ton, Amada #Apelio-III-2510V, 2000 watt hyd turret/laser combo, Fanuc 160iL, '03, #11091

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #Apelio-III-2510VL, 2000 watt laser, Fanuc 160iL, 2001, #11570

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #Aries-245, 19 station, 3 A/I, 300 SPM, 40" throat, 1993, #154673

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: grinders@machineryvalues.com) Andrew Valitt

22 Ton, Amada #EM-2510NT, 98.425" x 50" sheet, 45 station, 4 A/I, Fanuc AMCF-F (NT), 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

22 Ton, Amada #EM-2510NT, 45 station, 4 A/I, 50" x 196" sheet, CNC turret punch, NT, 2005

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

22 Ton, Amada #EM2510NT, w/MP1225NJ load/unload, 50" x 100" sheet, 45 stations, 4 A/I, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

22 Ton, Amada #EM2510NT, 50" x 100", 45 stations, 4 A/I, AMNC-F NT, 2004

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

22 Ton, Amada #EM2510NT, servo-electric turret punch press, 2004

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #LC-C1 NT Series punch/laser combo w/MP2512C1, 45 station, 2013, #10797

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #LC2012-C1-NT, 45 station, 1 A/I, Amada AMNC PC, Fanuc AF2000I-B, 2009

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

22 Ton, Amada #Libra-206, High Speed, 26 tools + 1, Fanuc 16P, 2002

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

22 Ton, Amada #Pega-244, CNC turret punch, 24 stations, 2 A/I, 1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

22 Ton, Amada #Pega-244, s/n #AP44149, 44 tool stations, 5.5kw, GE Fanuc 04PC, 1990

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

22 Ton, Amada #Pega-244, CNC punch, 44 stations, 40" x 40" traverse, Fanuc/Amada O4PC, '90

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

22 Ton, Amada #Pega-255, 50" x 50" sheet, 31 station, 3 A/I, 350 SPM, Fanuc 18P, 2002, #6378

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

22 Ton, Amada #Vipros-255, Fanuc 18P, 50" x 50", 31 station, 3 A/I, brush table, 1998, #29510

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

22 Ton, Amada #Vipros-255, 50" x 50" traverse, 50" x 100" sheet, 31 stations, Fanuc 18, tooling, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

22 Ton, Amada #Vipros-255, 50" x 50", 3.5" diameter, 31 station w/ 3 A/I, Fanuc 18P, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

22 Ton, Amada #Vipros-255, 50" x 50" sheet, 1/4" punch capacity, 31 turret stations, 2559 IPM, brush table, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

22 Ton, Amada #Vipros-255, CNC turret punch, 31 sta, 50" x 50" traverse, GE Fanuc 18P, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

22 Ton, Amada #Vipros-255, 50" x 50" sheet, 31 station with 3 A/I, Fanuc 18P, 1997, #6292

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

22 Ton, Amada #Vipros-255, CNC turret punch, GE Fanuc 18P control, 31 station, auto repositioning, ball transfer table, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

22 Ton, Amada #Vipros-255, 50" x 50" brush (50x100" w/repo), 31 sta, 3 A/I, Fanuc 18P, '98

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

22 Ton, Amada #Vipros-255, Fanuc 18P, 50" x 50", 31 station, 3 A/I, ball tbe, tooling, 1998, #29497

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

22 Ton, Amada #Vipros-255, hydraulic CNC turret punch press, Fanuc 18P, 1998, #11488

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #Vipros-255, hydraulic CNC turret punch press, Fanuc 18P, 2001, #11590

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Amada #Vipros-2510-King, CNC turret punch, 31 station, 3 A/I, Fanuc 18P, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sabito Machinery Inc, Concord, ON 905-738-8730 (Email: david@sabito.com) David Slimowitz

22 Ton, Amada #Vipros-2510-King, 31 station, 3 A/I, 50" x 98" sheet, Fanuc 18P, 2000, #9252

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

22 Ton, Amada #Vipros-2510-King, turret punch, Fanuc 18P, MP1225NJ auto load/unld, '00

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Murata Magnum #1250, CNC turret punch, 22 stations, 40.5" x 50", GE Fanuc OP, 1994

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

22 Ton, Murata Wiedeman #C2500I, Murata PC control, 22 station, 2 A/I, 2000 (2)avail.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

22 Ton, Murata Wiedemann #Centrum-2500i, CNC turret punch, 22 station, 51.18" thrt, hyd clutch/brake system, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

22 Ton, Murata #Motorum-2044, 50" x 50", Servo Electric Ram, 2000

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

22 Ton, Muratec #Motorum-2044EZ, Fanuc 18i-P control, full servo punching

  Photo Spec Sheet
 RFQ
Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

22 Ton, Nisshinbo #MAP-1000, CNC punch press, Nisshinbo Palvision CNC, 22 station, 2 A/I

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

22 Ton, Nisshinbo #MAP-1000, CNC punch, 22 sta, 2 A/I, 1/4" cap, Nisshinbo Palvision Control

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

22 Ton, Strippit #1250/20, 1/4" capacity, 98" x 51", 20 stations, 2 A/I, Fanuc CNC, thick tooling, 2000

  Photo Spec Sheet
 RFQ
Centra Corporation, Perry Hall, MD 410-945-0040 (Email: ed@centracorp.com) Ed/Mike/Thomas

22 Ton, Strippit #1250H-20, turret punch, 4' x 8', 2000

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

22 Ton, Strippit #CAP-1000, CNC turret punch press, 20 stations, Fanuc GN6P, 1984, #10373

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

22 Ton, Strippet LVD #Delta-1000TK, 3 A/I, 49" x 39" sheet, Autocon MNC 32000 CNC Control, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

22 Ton, Strippit #Global-1225/20, thin style, Fanuc 18Oi, 2001, #11192

  Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Strippit #Global-20 2.5M, 4' x 8', 2001

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

22 Ton, Strippit #Parma-1212, 49" x 49", Fanuc Oi, 21 station turret, 3 A/I, tooling, '07, #27959

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

22 Ton, Strippit #S1225, 49.2 x 98.4" sheet, 31 station, Fanuc 180i CNC, 360 HPM, 2008

 
 Visit Dealer's Equipment Listings  RFQ
T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

22 Ton, Strippit #S1225, thick turret, 31 stations, GE Fanuc 180i, Smart Stroke, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

22 Ton, Trumpf #TC200, 50" x 80" sheet plus repo, 15 station, under power, 1994

  Photo Spec Sheet
 RFQ
A M Metalmaq Inc, Hialeah, FL 305-883-9200 (Email: sales@ammetalmaq.com) Sales Dept.

22 Ton, Trumpf #TC2000R, CNC punch & contouring machine, 55" x 50" table, 9 station ATC

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

22 Ton, Trumpf #TC2000R, Bosch type 3, 1999

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Trumpf #TC2000R, CNC turret punch, 50" X, 50" Z, Bosch CNC Control, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

22 Ton, Trumpf #TC2000R, Siemens control, 50" x 50" work range, brush table, 1999, #81212

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

22 Ton, Trumpf #TC2020R, 50" X, 100" Y, 1/4" sheet thick, 3" punch diameter, 420 SPM, 19 station

  Photo
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

22 Ton, Trumpf #TC2020R, 19 station, 3" diameter, 1/4" thick, 100" X, 50" Y, Bosch 3, 2004, #81382 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

22 Ton, Trumpf #TC2020R, 50" thr, 50" x 50" travel., 3.5" hole, 19 station, Bosch, 2004, #81356

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

22 Ton, Trumpf #TC2020R, Bosch, 50" x 100", automatic load/unload, 2005

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

22 Ton, Trumpf #TruMatic-TC500, CNC punch, Bosch CNC controls, 20 tool position, 1994

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

22 Ton, Trumpf #TruPunch-2020, 19 station, 50" thr, 50" x 50" travels, Bosch, 2011, #81202

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

22 Ton, Trumpf #TruPunch-3000, servo electric turret punch, Bosch MTX CNC, 1000 SPM, '14

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro

22 Ton, Wiedemann #Motorum-2000, 30 station, Fanuc 16P, 40" throat, ball transfer table

 
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

22 Ton, Wiedemann #Motorum-M2044, Fanuc 18iP, 49.2" x 49.2", #112 tooled, 2 A/I, '99, #27242

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

23 Ton, Prima Power #E6x Compact Express servo electric, 5' x 10', 2015

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

23 Ton, Strippit #1250XP/20, 51" x 51", Strippit CNC, 20 station turret, 3 A/I loaded w/tooling, #28182

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Finn-Power #A5-25-SB, 3-1/2" punch, Siemens 850D, 20 station, conveyor, 1977, #13077

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
N S Machine Corp., Granger, IA 515-999-2999 (Email: sales@nsmachine.com) David Bryan

25 Ton, Finn-Power #A5-25SB, Sinumerik 840, 100x50", 3 A/I, 20 sta, 7-1/2" str, 8274 hrs, '00

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

25 Ton, Murata #Muratec-Motorum-2548, CNC turret punch, 2008

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

25 Ton, Trumpf #TC500, 100" X, 50" Y, Bosch CNC, 18 station ATC, new linear amplifier'16, #28663

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #TC500, 50" x 100", Bosch CNC, multi-tool, 18 station ATC, 1998, #27204

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #TC500, turret punch, 52" x 100", Bosch Trumagragh CNC Control with CRT, 20 station, 1989

 
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

25 Ton, Trumpf #TC500/1300, 18 station, 52" x 100" sheet, Bosh TrumaGraph CRT, 1995, #3957

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

25 Ton, Trumpf #TC500R, 50" x 100", Bosch control, 18 station, TrumaLift Sheetmaster LUL, 2001

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

25 Ton, Trumpf #TC500R-1300, 4' x 8', 2000

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

25 Ton, Trumpf #TC600L, punch laser, 50" x 100", Siemens 840D, 2400 watt laser, '01, #28780

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #TC600L, 63" x 120" travel, 3 KW Laser, Sheetmaster Load/Unload, 2001 #30011

  Photo Spec Sheet Video icon
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #TC5000, 100" X, 50" Y, Siemens 840D, load/unload, 18 sta, tapping, '06, #30156

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #TC6000L, punch/laser, 65" x 121", Siemens 840D, 2700 watt laser, #29578

 
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25 Ton, Trumpf #Trumatic-TC500, Bosch Trumagraph CNC, 5/16" max sheet thick, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

25 Ton, Trumpf #Trupunch-5000-1300, punching machine, sheetmaster load & unload sys, '08

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

27 Ton, Pullmax Pullmatic #104, 40" x 40" travel, 15 A/I & 2 MT sta's, 1998, #16343

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

27 Ton, Trumpf #TC500/1300, 120" X, 60" Y, 18 station, Bosch Trumagraph, 1996, #81261

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

27.5 Ton, Trumpf #TC500R, 50" x 100", 18 station tool changer, Bosch control, 1999

 
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

27.5 Ton, Trumpf #TC500R-1300, CNC fabricator, new amplifier 12/2016, 31440 hrs

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

27.5 Ton, Trumpf #TC600L, Siemens, laser punch, 3000 watt, 2001, #10795

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

30 Ton, Amada #Apelio-III-357V, CNC turret punch, 04PC Controller, auto repositioning

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

30 Ton, Amada #Pega-257, 50" x 72" sheet, 44 station, 2 A/I, 350 SPM, Fanuc 04PC, 1992, #6379

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-344Q, turret punch press, Fanuc 6M, 56 stations, 40" x 78" sheet, 1984

  Photo
 Visit Dealer's Equipment Listings  RFQ
A & A Machinery Sales, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

30 Ton, Amada #Pega-345Q, 58 stations, 2 A/I, 40" x 50" sheet, Fanuc 04PC, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-345Q, turret punch press, Fanuc 04PC, 40" x 50" sheet, 58 stations with A/I, 350 SPM, 1999, #13811J

  Photo Spec Sheet
 RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

30 Ton, Amada #Pega-345Q, 40" x 50", 1/4" thick, 4.5" hole diameter, 58 station, A/I, Fanuc 04PC, '99

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
HCI Machines, Venetia, PA 724-942-3382 (Email: Hcii@comcast.net) Terry Blackman

30 Ton, Amada #Pega-357, 58 station, 2 A/I, 50" x 72" sheet, Fanuc 04PC, 1988, #6358

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-357, 50" x 72" sheet, 58 station, 2 A/I, Fanuc 04PC, 1993, #6376

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-367, 60" x 72" sheet, 58 station, 2 A/I, Fanuc 04PC, 1988, #6384

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-367, 60" x 72" sheet, 58 station, 2 A/I, Fanuc 04PC, 1989, #6385

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

30 Ton, Amada #Pega-3050R, turret punch, Fanuc 6M, double clamp, 44 stations, 1.26" str

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

30 Ton, Amada #Pega-3050R, turret punch press, Fanuc 6M, 20 KVA, 1986

 
 RFQ
PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

30 Ton, Amada #Vela-II-355, 56 station, 1.575" str, 30 RPM, GE Fanuc 6M, 1984

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Equilibrium Machinery, Waukesha, WI 414-534-7512 (Email: anthony@equilibriummachinery.com) Anthony Zenobia

30 Ton, Amada #Vipros-358-King, turret punch, 04PC CNC, 58 stations, 50" x 80" sheet, 1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

30 Ton, Amada #Vipros-358-King, Amadan 04PC, 58 station, free standing hyd unit, 1997

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

30 Ton, Amada #Vipros-367, bridge type, Fanuc 04PCl, 45 station, 2 A/I, 1995, #81365

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

30 Ton, Euromac BX Multitool #1000/30-1250, 4-station, 1-1/4" multitool, 2010, #46850

  Photo
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

30 Ton, Euromac #MTX1250, CNC turret punch, 3.18" punch diameter, 5 stations, 2 A/I, Euromac PC Based Controller, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

30 Ton, Euromac #ZX1000/30, hydraulic punch press, 50" X-Axis stroke, 40" Y-Axis stroke

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

30 Ton, Euromac #ZX1000/30, CNC punch, 50" X, 40" Y, Euromac PC Based Control, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

30 Ton, Finn-Power #FS-25-SB, hydraulic turret punch, Siemens Sinumerik 840D CNC control, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

30 Ton, Finn-Power #TP2525, 21 turret stations, Siemens 3N CNC Control, 1994

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

30 Ton, Nisshinbo #HIQ-1525/30, 50" x 100" table, Nisshinbo PAL510T control

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

33 Ton, Amada Strippit LVD #1000H/30, 40" x 50" table, 40 station thin turret, 4 A/I, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alternative Machinery Sales, Bellport, NY 631-345-9500 (Email: ddoxsee@altparts.com) Dan Doxsee

33 Ton, Amada #345Q, turret punch, 58 sta, 40" x 50" sheet, 2 A/I, Amadan 04 PC Controlr, '01

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

33 Ton, Amada #Apelio / Pega, 50" x 72", Fanuc 05, hydraulic clutch, 1992

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Apelio-357V, punch/laser, 1.5 KW Fanuc laser, 50" x 72", 58 sta, '93, #27120

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Amada #Apelio-357V, punch laser combo, 1500 watt, 58 pos turret, 48" x 96", 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

33 Ton, Amada #Apelio-III, 2000W Fanuc, 50" x 72" (50" x 144" ), 58 station 2 AI, 16L control, 1998

  Photo
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Apelio-III, 58 station, 2 A/I, 1500 watt, 50" x 144" sheet, Fanuc 16L, Torit dust collector, 1997

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Apelio-III-357V, 50x72", Fanuc 16L, 58 sta, 2 A/I, 1500 watt laser, '97, #30210

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Amada #Apelio-III-357V, 1500 watt, new turbo blower, 1997, #10883

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #EMK3610NT, 58 station, 4 A/I, 98.425" x 60" sheet, Fanuc AMCF-F, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

33 Ton, Amada #EMK3612-M2, CNC turret punch, 58 station, 120" X, 60" Y, scrap conveyor, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pioneer Machine Sales, Katy, TX 479-651-3683 (Email: chancy@pioneermachinesales.com) Chancy Cockrun

33 Ton, Amada #EML3610NTP, servo-driven turret laser combo, 4000 watt, P & F, #11194

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #EMLK3610, Combo, Fanuc AMNC PB based CNC, 58 station thick, 4 A/I, 2015, #81466

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

33 Ton, Amada #EMLK3610NT, CNC turret, 58 station, 4 A/I, Fanuc AMCF-F (NT), 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

33 Ton, Amada #EMLK3610NT, 60" x 120" sheet, Fanuc AMCF-F, 58 station, 4 A/I, #C5114

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

33 Ton, Amada #EMZ3510NT, 98.425" x 50" sheet, 58 stations, 4 A/I, Fanuc AMCF-F, '05

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

33 Ton, Amada #King-358-II, Fanuc 19PC, 58 stations, 4 A/I, 50" x 157.48" sheet, 2003, #8494

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

33 Ton, Amada #King-368-II, turret punch, 58 station, 1988

  Photo Spec Sheet
 RFQ
Pioneer Machine Sales, Katy, TX 479-651-3683 (Email: chancy@pioneermachinesales.com) Chancy Cockrun

33 Ton, Amada #Octo-334, 8 station, 30" x 40" sheets, CNC turret punch, Fanuc 6M, 1984

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Octo-334 " thick style", CNC fabricator, Fanuc 6M, A/I station, misc tooling, '86

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Pega-345, CNC turret punch, 40" throat, (2) A/I, tooling included, under power, 1993

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

33 Ton, Amada #Pega-345-King, 44 station, 2 A/I, 40" x 50" sheet, Amadan O4PC, 1994

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

33 Ton, Amada #Pega-345-King, 58 station, 2 A/I, CNC turret punch, 40" x 50" sheet, Amadan 04-PC, work clamps, 1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-345-King, 58 station, 2 A/I, 40" x 50" sheet, CNC turret punch, Amada O4PC, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-345-King, 58 station, 2 A/I, 40" x 50" sheet, CNC turret punch, Amada 04PC, 1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-345-Queen, 40" x 50" sheet, 58 station, 2 A/I, 04PC control, CNC turret punch, 2001

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-345-Queen, 58 station, 2 A/I, 40" x 50" sheet, Amada 04-PC, 1989

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-357, 50" x 72" (50" x 144" ), 44 station, 2 A/I, Fanuc 04PC, hydraulic clutch, 1993

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Pega-357, CNC turret punch, GE Fanuc 04PC, 44 station, auto repositioning, hydraulic clutch & brake, ball transfer table, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-357, 44 station, 2 A/I, 50" x 70" sheet, CNC turret punch, 6M, work clamps, 1986

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-357, 50" x 72" (50" x 144" ), 44 station, 2 A/I, Fanuc 04PC, hydraulic clutch, 1991

  Photo
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Pega-357, CNC turret punch, 58 station, 04PC CNC, 300 SPM, S40137

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

33 Ton, Amada #Pega-357, 50" x 72" (50" x 144" ), 58 station, 2 A/I, Fanuc 04PC, 1995

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Pega-357, 58 station, 50" x 70" sheet, CNC turret punch, 30 RPM, 04PC, 1993

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-357, CNC turret punch, 58 stations, 50" x 72", GE Fanuc 04PC, 1994

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-357, CNC turret punch, 58 stations, 50" x 72", GE Fanuc 05PLA, 1992

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada Apelio #Pega-357, CNC turret punch, 58 stations, 50" x 72", GE Fanuc 04PC, 1990

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-357, CNC turret punch, 58 station, 2 A/I, 50" x 70" sheet, 04-PC control, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-357, 50" x 72" traverse, 50" x 144" sheet, 1/4" capacity, 58 station, Fanuc 04PC, '96

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-357, CNC turret punch, Fanuc 04PC CNC, 1996, #11566

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Pega-357, turret punch, Fanuc 6M CNC, hydraulic clutch, 1988, #11536

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Pega-357S, CNC turret punch, 44 station, GE Fanuc 04PC, auto repositioning, hydraulic clutch & brake, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-358, CNC turret punch, 44 stations, GE Fanuc 04PC CNC, auto repositioning, hyd clutch & brake, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Amada #Pega-358S, 50" x 78.74" sheet, 4.5" hole, 58 station, 4 A/I, Fanuc 04PC, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

33 Ton, Amada #Pega-358S, 4' x 8', 58 station thick, 2 A/I, 1995

  Photo Spec Sheet
 RFQ
Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

33 Ton, Amada #Pega-367, CNC turret punch, 58 stations, 2 A/I, 1991

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-367, 60" x 72" (60" x 144" ), 58 station 2 A/I, 04PC, 1990

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Pega-367, 58 station, 4 A/I, 60" x 144" sheet, CNC turret punch, Amada 04PC, 1993

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Pega-II, 58 stations, 2 A/I, 50" x 144" w/repo, .250" cap, Amada/Fanuc-P, tooling.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

33 Ton, Amada #Pega-Queen, CNC turret punch, 04PC control, 58 station thick turret, 2 A/I, 40" x 50" sheet size, 30 RPM, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

33 Ton, Amada #Vipros-345, 40" x 50", Amadan 04PC, 58 Sta., 2 A/I, 1993, #27345

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Amada #Vipros-357, CNC turret punch, 04PC CNC, 44 stations, 50" x 72", S40138

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

33 Ton, Amada #Vipros-357, 44 station, 2 A/I, 50" x 144" sheet, CNC turret punch, Amadan 04PC, 1992

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Vipros-357, 50" x 72", Amadan 04PC, 58 Sta. thick, (2) A/I, tooling, 1995, #27039

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Amada #Vipros-357, 50" x 72" table, 58 Station Thick Turret, 2 A/I, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Alternative Machinery Sales, Bellport, NY 631-345-9500 (Email: ddoxsee@altparts.com) Dan Doxsee

33 Ton, Amada #Vipros-357-Queen, CNC turret punch, 45 station thick turret, 2000, #3935

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

33 Ton, Amada #Vipros-357-Queen, 50" x 72", 45 station, 4 A/I, Amadan 04PC, 1992, #30054

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Amada #Vipros-357-Queen, 50" x 72" (50" x 144" ) brush, 58 station 2 A/I, 04PC, 1998

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-357-Queen, 50" x 72" (50" x 144" )ball table., 58 station, 2 A/I, 18P, '99

 
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-357Q, turret punch, 04PC CNC, 58 station with A/I, 50" x 72" sheet, '98

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

33 Ton, Amada #Vipros-358-King, 50" x 80" brush table, 58 station 4 A/I, 04PC & PHNC, 1995

  Photo
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-358-King, 58 stations, 4 A/I, Fanuc 04pc, 1998, S34855

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

33 Ton, Amada #Vipros-358-King-II, 50" x 80", 58 station 4 A/I, Fanuc 18P, 2000

  Photo
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-358-King-II, 58 station, 4 A/I, CNC turret punch, Fanuc 18P, 2000

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Vipros-358-King-II, 58 station, 4 A/I, CNC turret punch, Fanuc 18P, 2001

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Vipros-358-King-II, Fanuc 18P, 58 station, 4 A/I, 50" x 78" travels, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

33 Ton, Amada #Vipros-358-King-II, turret punch, Fanuc 18P CNC, 1999, #11551

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-367Q, turret punch, 60" x 72", 58 stations, 4 A/I, Fanuc 18P, '01, #8714

  Photo
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

33 Ton, Amada #Vipros-367-Queen, Fanuc 18P control, 58 station with 4 A/I, 60" x 72" sheet, 2001, #81359

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

33 Ton, Amada #Vipros-367-Queen, 60" x 72" (60" x 144" ) brush, 58 sta, 2 A/I, 18P, '01

 
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-367-Queen, hyd turret punch, Fanuc 18P, 58 station, 2001, #11250

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-368-King-II, 60" x 78.7", 58 station, 1.25" /4.5" A/I, Fanuc 18P, '99, #6375

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

33 Ton, Amada #Vipros-368-King-II, 60" x 80" (60" x 160" ), 58 station, 4 A/I turret, 18P, 1998

  Photo
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-368-King-II, turret punch, 60" x 78.74" table travel, Fanuc 18P, 58 stations, 2 A/I, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

33 Ton, Amada #Vipros-368-King-II, Fanuc 18P CNC control, 2000, #11553

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-368-King-II, hyd turret punch, Fanuc 18P & PHNC CNC, '99, #11552

  Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-357, 50" x 72", 50" throat, 2 A/I, Amadan 04PC CNC Control, 1994

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

33 Ton, Amada #Vipros-358-King, 50" x 80", 50" throat, 58 station, 4 A/I, Amadan 04PC CNC Control, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

33 Ton, Amada #Vipros-358-King-II, 58 station, 4 A/I, CNC turret punch, Fanuc 18P, 1998

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Amada #Vipros-3610L, turret punch w/l shear, 6-shelf loader w/ 5' x10' cap, #11021

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-III-3510NT, 50" x 100", 58 stations, 4 A/I, AMNC-F NT, 2004

 
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Amada #Vipros-III-Z3510NT, hi-speed hydraulic turret punch press, 2004, #11348

  Photo Spec Sheet
 RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

33 Ton, Amada #Vipros-III-Z3510NT, 50" x 100" table travel, 0.135" plate thick, Fanuc AMNC, '04

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

33 Ton, Amada #Vipros-King-II, 50" x 78" travels, 58 station, 4 A/I, Fanuc 18P, 2003, #29464

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Finn-Power #C5 Compact Express Load/Unload, 50" x 100", 20 station turret, 4 A/I, #28126

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Finn-Power #C6, 20 station, 9 A/I, 60" thrt, 5' x10' table., CNC turret punch, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Finn-Power #C6, CNC turret punch, 20 station, thick style, 5 A/I, 130" x 59" sheet, #3659

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

33 Ton, Finn-Power #F5-25SB, 20 station, 10 A/I, 8'3" x 4'2" sheet, Siemens Sinumerik 840D Control, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

33 Ton, Finn-Power #F6-25, 60" x 80" table, thick style tooling, 2002

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Finn-Power #F6-2SB, 160" x 61" sheet, 20 stations, 5/16" max thickness, 1999, #3778

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

33 Ton, Finn-Power #TP4020, hydraulic turret punch, 120" x 60", Siemens Seminumerik 3M-4C, 1992

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Finn-Power #TRS6SB, CNC turret & right angle shear machine, 20 station, #3581

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

33 Ton, Pullmax #7000, CNC hydraulic turret punch, 15 stations, 67.9" x 121.6", Pullmax CNC, 2005

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Pullmax #7000, CNC turret punch, 15 sta, 67.9" x 121.6" traverse, Pullmax Control, '05

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

33 Ton, Strippit #1000/H30, 40" x 50", Fanuc OP, 40 station thin turret, 4 A/I, 1999, #29593

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

33 Ton, Strippit #1250H/30, CNC turret punch, 4 A/I, Fanuc OP, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Strippit #1250H/30 CNC, 50" x 80" sheet, 4 A/I, Fanuc OP, 2 work clamps, #016316

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

33 Ton, Strippit #1250MH, Fanuc OP, 50" x 80", 42 station, 4 A/I, conveyor, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

33 Ton, Strippit #1250S, 33 station, 3 A/I, 50" x 80" sheet, CNC turret punch, Fanuc OP, 1990

  Photo
 Visit Dealer's Equipment Listings  RFQ
Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

33 Ton, Strippit #FC1250S, 33 station, 2 A/I, 50" x 80" (50" x 160" ), Fanuc 0P, 1990

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

33 Ton, Strippit #FC1500H30, 60" x 60" (60" x 120" ), 40 station, 3 A/I, Fanuc 180IP, 2000

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

40 Ton, Whitney #3400-XP, Siemens 840DI, 9 tool, 40" X, 60" Y, .5" thickness, '13, #81109

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

40 Ton, Whitney #3700RR, punch/plasma, 15 station tool changer, 200 amp plasma, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

50 Ton, Amada #Apelio-5610, 60" x 100" sheet, Fanuc control, 1/2" thick cap, 1500 watt, 1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

50 Ton, Amada #Coma-555, CNC turret punch, 33 stations, GE Fanuc 6M, hyd clutch, 1987

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

50 Ton, Amada #Coma-555, CNC turret punch, 46 station, Fanuc C, 50" x 50" sheet, '86, #15079

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

50 Ton, Amada #Coma-567, CNC turret punch, 72 station, GE Fanuc 6M, auto repositioning, hydraulic clutch

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

50 Ton, Euromac #CX750/50, CNC turret punch, 63" x 41" table, 37.40" thrt, PC based control, '04

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

50 Ton, Strippit #FC1250MH, turret punch, 42 sta, (4) 3-1/2" A/I, GE Fanuc OP Control, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

55 Ton, Amada #Coma-557, 58 station, A/I, 50" x 72" sheet, Fanuc 04PC, 1999, #9280

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

55 Ton, Amada #Coma-557, Fanuc 04PC, 58 turret stations with A/I, 1992, #6231

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

55 Ton, Amada #Coma-567, CNC turret punch, 60" x 72" max traverse, 04 P.C Control, (2) A/I stations, auto repositioning, slug conveyor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

55 Ton, Amada #Coma-567, CNC turret punch plasma, 44 stations, 60" x 72", GE Fanuc 6M, 1988

  Photo
 Visit Dealer's Equipment Listings  RFQ
Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

55 Ton, Amada #Coma-567, CNC turret punch, 44 stations, 60" x 72" traverse, Fanuc 6M, 1988

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

55 Ton, Amada #Coma-567, 60" x 72" (60" x 144" w/repo), 58 station 2A/I, Fanuc 04PC, 2001

  Photo Spec Sheet
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

55 Ton, Amada #Coma-588, turret punch press, Amadan Fanuc 04PC, 58 station, 2 A/I, '90

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro

55 Ton, Amada #Coma-506072, 60" throat, 46 station, 60" x 72" area, Fanuc 200B, 1981

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

55 Ton, Amada #RG-50, upacting, 6.10' OA, 3.9" str., 14.57" OH, 15.7" thrt, Amada NC9EX-II

  Photo
 Visit Dealer's Equipment Listings  RFQ
Fabricating Machinery Corp, Duarte, CA 626-359-0024 (Email: maria@fabmach.com) Maria Pitones

55 Ton, Amada #Vipros-558-King, CNC turret punch w/CL510 load/unld, 58 sta, 4 A/I, S39634

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

55 Ton, Amada #Vipros-568, 60" x 80" (60" x 160" ), 62 station 2 A/I, Fanuc 04PC, 1995

 
 RFQ
Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

55 Ton, Euromac #CX750/50-1250, CNC hydraulic, 30" throat, 130 HPM, 5.5 HP, 4 station multi tool

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

110 Ton, Geka #Puma-110, CNC punch, 20" throat, 40" X, 20" Y, 42 SPM, roller ball table, 2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ Auction item
Pearl Equipment Co, Nashville, TN 615-383-8703 (Email: sales@pearlequipment.com) Si Culp

Amada #MP1225NJ, automatic load/unloader, 2000, #11233

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #Pega-357, 44 sta, 50" x 72" traverse, GE Fanuc 04PC, hyd clutch & brake, '95

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Euromac #BX1000/30-1250, turret punch, auto lube, Trumpf adapter, L-Gauge, semi-auto, '04

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Strippit #1250S, thin turret, 80" x 50", 33 station, 2 A/I, GE Fanuc OP control, 1994

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Warner & Swasey (Weidemann) #W-2050, CNC punch, 24 sta, PC Control, 1983, retrofit '08

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise