Browse:  Machinery Electrical
RSS Linkedin Instagram Blog Surplus Record

CNC MACHINERY & EQUIPMENT:
MILLERS, VERTICAL/UNIVERSAL, Bed & Knee Type, CNC

R & J Machinery Buys and Sells Southwestern Trak
There are 152 listings in this category
Update: Tue, Nov 19, 2019 00:34:01
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

Acer #4VK, 10" x 50" table, 31" X, 16" Y, 3 HP, Anilam 1100 CNC, 40 taper, power draw bar (2 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Acer #E1454B, 3-Axis CNC bed mill, 14" x 54" table, 5 HP, Fagor 3-Axis CNC control, 2009

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Acer #EVS-3VKH, CNC Vertical Mill, Millstar III, 2000, #48357

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Acer #FMC-1454B, CNC bed mill, Anilam 3000M control, 2011

  Photo
 Visit Dealer's Equipment Listings  RFQ
T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Acer, 9" x 48" table., 3 HP, 31" X, 12" Y, 5" Z, V/S, Acu-Rite 2-Axis DRO, R-8, A&T PDB, #158892

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Acra #AM4V, 10" x 54" table, 5 HP, 34" X, 15" Y, 5" Z, #40, Centroid M400, 4 Axis, #A5489

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra #AMJY2HT, 11-3/16" x 51-3/16" vertical/horizontal, 3-Axis CNC, double box ways, new, #SMAMJY2HT

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Acra MillPower #LCM-50 MillPWR 3AX, 3-Axis CNC, hard chrome ways, one shot lube system, new, #SMLCM50MILLPWR3AX

  Photo
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Alliant #42S, 9" x 42" table, 28" X, 12" Y, 16" Z, 5" quill, Fagor control

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Alliant #949-3V, 3-Axis Anilam 3000M, 9" x 49" table, 37x12.75x17", #30 tpr, 3HP, power quill/X/Y

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Alliant Proto Trak Plus #949-3V, CNC vertical mill, 9" x 49" table, 3 HP, PDB, #72280

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Amura-Seiki, 10" x 50" table, 3-axis, 31.5" long, 14.5" cr, 3 HP, #30 tpr, Fagor control, '01

  Photo
 RFQ
Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Email: glaconis@me.com) Gary Laconis

Atrump #8FC, 18" x 56" table, 7.5 HP, 4000 RPM, 50" X, 22" Y, 24" Z, 6" spindle tvl, Centroid M-400S Control.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

Birmingham #AC2V Accu II, 9" x 49" table, 60-4300 RPM, 3 HP, Centroid M400S CNC control, 2003, #28560

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Bridgeport #EZ-Trak, CNC vertical mill, 11" x 58" table, 2 HP, power draw bar, EX-Trak CNC, S40212

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Bridgeport #EZ-Trak, 2-Axis CNC/conventional mill milling, late model gem, loaded, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Rohner Machinery Sales Inc, Fullerton, CA 714-441-1527 (Email: mail@rohnermachinery.com) Chris Rohner

Bridgeport #EZ-Trak Series II, 3 Axis CNC vertical milling machine, excellent, loaded

  Photo Spec Sheet
 RFQ
Rohner Machinery Sales Inc, Fullerton, CA 714-441-1527 (Email: mail@rohnermachinery.com) Chris Rohner

Bridgeport #EZ-Trak-DX, 3-Axis CNC knee mill, 9" x 48" table, DRO, power feeds, R-8

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

Bridgeport #EZ-Trak-DX-II, CNC vertical mill, 11" x 58" table, 2 HP, power draw bar, EX-Trak CNC, S40211

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Bridgeport #EZ-Trak-DX-II, 2-Axis, 32" X, 14.5" Y, 5" Z, 2 HP, 4200 RPM, 1998

  Photo
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Bridgeport #EZ-Trak-DX-Series I, 9" x 48" table., 2 HP, 30" X, 12" Y, 16" Z, Kurt PDB, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Bridgeport #EZ-Trak-SXII, 11" x 58" table, 32" X, 14.5" Y, 5 " Z, EZ-Trak SX CNC control, auto or manual, 2 HP, #28413

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Bridgeport Hardinge 3-Axis CNC #Series-I, 9" x 48" table, Acu-Rite Millpower G2 controls, 3HP, '12

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

Bridgeport #Series-I, milling machine with Trak AGE 2 2-Axis CNC control, 9" x 42" table, 2 HP, 3-Axis DRO, 1983

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Bridgeport #Series-I, milling machine with Trak AGE 2 2-Axis CNC control, 9" x 42" table, 1.5 HP, 3-Axis DRO, 1971

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Bridgeport #Series-I, CNC mill, 42" table, 2 HP, Proto Trak Plus Control.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Bridgeport #Series-I, CNC vertical mill, 9" x 42" table, 2 HP, 1981, retrofit w/3-Axis CNC Automation System M3X control 1995, #19052

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Bridgeport #Series-I, CNC vertical mill, 9" x 48" table, 36" X, 12" Y, 5" quill, 16" knee travel

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Bridgeport #Series-I-EZ-Trak-SX, 9" x 48" table, 30" X, 12" Y, 5 " Z, EZ-Trak SX CNC control, auto or manual, 2 HP, #28415

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Bridgeport #Series-II, 9" x 48" table, Fagor 8055MC, 2 HP, 30" X, 12" Y, 5" Z, power drawbar, Fagor CNC 8055MC Controlr, 2013, #47964

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Bridgeport #V2XT, 3-Axis, 9" x 48", DX-32 PC based, #30QC spindle, 60-4200 RPM, exc, '01, #44424

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Chevalier #FM-32HP, 10" x 50" table., 3 HP, 30" long, 16" cross, 15" knee, Proto Trak M3, 3-Axis, #A3716

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Chevalier #FM-33K Falcon, Dynapath Delta Autocon control, s/n #KC84A008, #83123

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Chevalier #FM-43H, 10" x 54" table, 34" x 15" x 5" cap, Anilam 3300 MK, 2001

 
 RFQ
Allied Machinery Co, Warren, MI 586-754-9200 (Email: tb@alliedmachinery.com) Ted Barrie

Clausing /Atlas #4BSCNC40, 15" x 60" table., 5 HP, 41.3" X, 19.6" Y, 23.6" Z, Acu-Rite MillPWR

 
 Visit Dealer's Equipment Listings  RFQ
Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Email: scott@alternativemachinetool.com) Scott Buth

Clausing /Atlas #6BVSCNC40, 15" x 60" table., 5 HP, 41.3" X19.6" Y, 23.6" Z, Acu-Rite MillPWR

 
 Visit Dealer's Equipment Listings  RFQ
Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Email: scott@alternativemachinetool.com) Scott Buth

Clausing Kondia Bridgeport #FV-1, 9" x 48" table, 2 HP, SWI Proto Trak MX-3, 3-Axis, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

Clausing Kondia #FV-1, 42" x 12" table, 24" X, 15" Y, 16.5" Z, 4000 RPM, 3 HP, NMTB 30 taper, Delta control, 1998, #7464

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Clausing Kondia #FV-1, 12" x 40" table, 24" x 15" x 16.5" travels, #30 taper, Delta 20 & 40 controls

  Photo
 RFQ
Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Email: ditterind@gmail.com) Jerry Ditter

Clausing Kondia #FV-1, 9" x 49" table, Acu-Rite MILLPWR 3-Axis, 3 HP, 30 tpr, tooling, mint, 2013

  Photo
 RFQ
Alenco Tool Supply, Chicago, IL 773-725-5700 (Email: sales@alencotool.com) Paul Braeseke

Clausing Kondia #FV-300, CNC vertical milling machine, 11" x 58" T-slot table, tilt head

  Photo
 Visit Dealer's Equipment Listings  RFQ
A & A Machinery Sales, Morrisville, PA 215-428-1100 (Email: aasales@aamachinery.com) Tim Cromwell

Clausing Kondia #VF-1, 9" x 49" table, 3 HP, Dynapath 10, 24" X, 15.5" Y, 5" Z, 4000 RPM, 3-Axis

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Comet #MV-5, CNC vertical milling (bed type), 13" x 42" table, 5 HP, 1998, #6872P

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Compumill #4000, 51" x 13" table., 5 HP, 31" X, 17" Y, 5" Z, #40, 3-Axis, Dynapath-Autocon Delta 50, PDB, power elev., 1986, #158055

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Emcomat #FB-600L, universal/vertical milling machine, 12 HP, never installed, 2013, #11521

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Fryer #MB-14, CNC vertical knee mill, Anilam 3300MK Control, 40" X, 18" Y, 21.7" Z, 12" x 54" table, 5 HP, 4200 RPM, 40 Taper, #7251

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Fryer #MB-14, CNC vertical tool room mill, 16" x 54" table, 10 HP, Anilam 3300MK, #1557

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

Fryer #MB-14, 14" x 54" table, 20" X, 20" Y, 21.75" Z, 5 HP, Anilam 3300 MK, 2000

  Photo Spec Sheet
 RFQ
Michael Fine Machinery Co., Livingston, NJ 973-992-5961 (Email: Mcfmach@aol.com) Michael/ Dave

Fryer #MB-14, Anilam 3000 Touch, 54" x 16" table, 40x18x22", CT40, 4200 RPM, 5 HP, 2004

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Fryer #VB60, CNC bed mill, 24" x 73" table, 25/30 HP, 6000 RPM, Anilam 6000i-Touch control, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Ganesh #GBM4020, heavy duty bed mill, 41" x 19", 8000 rpm, CT-40, 10 hp, Fanuc OiM, 2005

 
 RFQ
Performance Machine Tools, Fremont, CA 510-249-1000 (Email: sales@permach.com) Robert Kroha

Ganesh #GMV-1, 9" x 42" table, Sony NU20, 3 Axis CNC, Kurt Vise, Auto Draw Bar, 3 HP, #4863

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

H.H. Roberts #5GL, 12" x 50" table, 2-axis, 32" long, 14.5" cr, 5 HP, Anilam 100, 1999

  Photo
 RFQ
Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Email: glaconis@me.com) Gary Laconis

Hardinge #EZ-Vision, 9" x 48" table, 30" X, 12" Y, 16" Z, EZ Vision CNC, 2010, #30055

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Heckert #FU45, overarm mill, 18" x 71" table, #50 tpr, power feed/rapid, 52" long, 14" cross, 24-3/4" vert., 2240 RPM, 15 HP

 
 RFQ
Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal

Hurco #30SSM, bed type, Conversational control, 52" x 11" table, 5 HP, 35" x 18" x 20", 1999, #10083

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Hurco #Hawk 30/SSM, 3-axis, 52" x 11" table, 35" X, 18" Y, 20" Z, Ultimax SSM control, s/n H30s-95015128A

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Hurco #Hawk-5-SSM, CNC vertical mill, 13" x 42" table, 5 HP, 3-Axis, Ultimax SSM Control, #8781HP

  Photo
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Hurco #Hawk-5M, 31" X, 14" Y, BT #40 Taper, 5 HP, Ultimax III/Dual CRT Control, under power, 1996, #6591

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Hurco #Hawk-30, 35" X, 18" Y, 20" Z, Cat 40, 5 HP, 11" x 52" table, 3800 RPM, PDB, '00, #2958

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: sales@machinerysource.com) Sales Dept.

Hurco #KM-3, CNC vertical knee mill, 11-3/4" x 42" table, 3 HP, Hurco Ultimax control, #30 tpr

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Hurco #KM-3P, CNC vertical knee mill, 11-3/4" x 42" table, 3 HP, Hurco Ultimax control, #30 tpr

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Hwacheon Exechon #KE700, 5-Axis, 78" X, 59" Y, 23" Z, 43x30" table, 18k RPM, Siemens 840d, '08

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

KBC, 9" x 48" table, 3 HP, 36" long, 12" cross, 5" quill, 16" knee, 12" ram, ProtoTrak Edge 2-Axis

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Kitamura #BridgeCenter-8 CNC Bridgemill, 35.4" x 118.1" table, Fanuc Series 15M, Cat 50, 40 ATC, 1991

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Lagun Lagunamatic #250S, Dynapath Delta 10, 10x44", 24x14x6", #40, 4200 RPM, 3-Ax, '93

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Lagun #FTV-2S, 10" X 50" table, 2 HP, 5/8" T-Slot, 16" X, 18" Y, 16" Z, R-8, 50-4250 RPM, s/n 28783

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Lagun #FTV-2S, CNC vertical mill, Crusader Series M, 50" x 10" table, 2 HP, PDB, #67027

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Lagun, 3-Axis CNC vertical knee mill, Anilam 1100M CNC control

  Photo
 Visit Dealer's Equipment Listings  RFQ
T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Magnum-Cut #4VS, CNC vertical millee, 10" x 54" table, 5 HP, 3-Axis Fagor 8055iMC, #3919

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Makino #KE55, 3-Axis Mold Maker CNC vertical mill, 15" x 32" table, 7.5 HP, Makino Pro JN CNC control, hand controls, 1996 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Maximart #2VS, 9" x 49" table., 3 HP, 32.9" long, 12" cross, 5" quill, 15.75" knee, 6" table. vise, 2-Axis Dynamic DRO, R8, one shot, #3956

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Maximart #MX-B51V, CNC milling machine, 16" x 62" table, 47" X, 22" Y, 23" Z, 7.5 HP, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Mega #1000 Series, CNC knee mill, 12" x 60" table, 5 HP, Anilam 1400 Control, Kurt vise, #5344

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Millport Blue Rhino #1660 DRO, 40" X, 13.5" Y, 22.5" Z, 16" x 60", 5" quill, #30NST, 4200 RPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Consultants Inc, Salt Lake City, UT 801-531-9500 (Email: mci@machineryconsultants.com) Bill Wilson

Milltronics #BR-50, 96" x 48" table., 100" X, 50" Y, 28" Z, Centurion 7 control., 10000 rpm, 24 ATC, 2005

  Photo
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

Milltronics #MB-19, 13" x 50" table, #40 taper, Centurion 6 SLS CNC control, 2003

 
 RFQ
Heart Of Wisconsin Mchy Co, Nekoosa, WI 715-886-4926 (Email: How@tznet.com) Fred Parker

Milltronics #MB-19A, 13" x 50" table, #40 taper, Centurian 6 control, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

Milltronics #Partner-00, 3-Axis CNC knee mill, Centurion 6 control, 10" x 50" table, 3 HP, #1564

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

Milltronics #Partner-03 5000VS, 59" x 11.8" table, 47" long., 5 HP, #40, 6" quill travel, #81808

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Milltronics #Partner-03, Centurion 1, 10" x 50" table, 36x16x16", 5 HP, R-8, 3-Axis, 4200 RPM, '95

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Milltronics #Partner-04, Centurion 1, 13" x 42" table, 32x16x5x10", 5HP, CT40, 3-Axis CNC, '96

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Milltronics #VKM-3, vertical turret milling machine, Centurion 7, 12" x 50" table, 5 HP, #1560

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

Modig #MD7200, CNC extrusion milling machine, Fanuc 16M control, 20000 RPM, 24 ATC, CT40, 1997 (6 Available)

 
 RFQ Auction item
Machinery Network Auctions, Encino, CA 818-788-2260 (Email: Info@machinerynetworkauctions.com) Gary Treisman

NC Systems #VM-750, Dynapath CNC, 55x18", 31x17x6.5", 4k RPM, clnt, box ways, table guards

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

OKK #MHA-400II, CNC bed mill, 17-11/16" x 43-1/4" table, Graphic ML control, #50 taper, with extra parts

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Parker Morey #1250UZ/LA, horizontal/vertical mill, Accurite DRO, 5 HP, 1990, #64549

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Parpas #SL-100/3000, Heidenhain TNC-426-CA, 137" x 52" table, 118" X, 60" Y, 30" Z, 40/50 HP, 1998

 
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Phoenix #VTC-3010, vert.CNC mill, 182" x 43" table, 84" x 37" x 28" travel, #50 tpr, CNC update'03

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Roberts Machinery Sales, Ferndale, MI 248-543-4466 (Email: rmsused@aol.com) Kimball R Roberts

Prostar, 9" x 42" table, 3 HP, 2-Axis Mitutoyo DRO, vise, R-8, 70-4200 RPM, one shot lube, #3954

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

RBI #305VS, bed mill, 9" x 42" table, 2 HP, 4500 RPM, PDB, Trak AGE 2 CNC, 1989, HB-19963

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

Servo #3000, 3-Axis Teach-in control, 12" x 48" table, 3 HP, PDB, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Sharnoa, CNC Vertical Mill, 80" X, 30" Y, 30" Z, 3000/6000 RPM, no tool changer, Heidenhain Control., #7000

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Sharp #HMV, vertical CNC knee mill, Prototrak M3 3-Axis control, 10" x 51" table, 3 HP, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Sharp #LC16CV, CNC knee mill, 10" x 47" table, 24.5" X, 10.9" Y, 4.5" Z, 16" knee tvl., 30 taper, Mitsubishi Meldas MO

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Sharp #LMV, miller, ProtoTrack CNC control, 9" x 49" table, vari-speed, tooling, collets R-8

  Photo
 RFQ
Machine Central LLC, Denver, CO 303-632-8818 (Email: machinecentral@comcast.net) Andy Weiss

Sharp #LMV-50/MP-3, vertical mill, 9" x 50" table, 3 HP, 60-4500 RPM, auto lube, 360°swivel hd

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Sharp #LMV-50/MP-3, 3-Axis, MillPWR-G2, 9" x 50" table, 3 HP, 60-4500 RPM, 2017, #46906

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Sharp #LMV-MP-2, Mill Package, 9" x 42" table, 3 HP, auto lube sys, hard-chrome ways

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Shizuoka #Millmaster, CNC Mill, 4th Axis, Dynapath Control, 85-3800 RPM, AST40 Nose, 4 HP

  Photo
 RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Sigma #SDV-4224HLA, double column, 86x157" table, 165" X, 114" Y, 98" B/C, Fanuc 18iMB, '09, #30069

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

SWI #Acramill-AM2V Proto Trak, 9" x 42" table, 26" x 12" travel, Kurt PDB, R8 taper, 2000

  Photo
 RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

SWI #DPM, 10" x 50" table., 3 HP, 30" X, 17" Y, 23.5" Z, #40, Trak DPM 3-Axis, PDB, vise, 1999, #11156

  Photo
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

SWI #DPM-2, 9" x 49" table, 3 HP, Proto-Trak SMX Control, 4200 RPM, R8 taper, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & M Machinery Sales Inc, Warren, MI 888-547-4342 (Email: sales@usedmachinerysales.com) Spencer Minns

SWI #DPM-2, 9" x 49" table, 3 HP, Proto-Trak SMX Control, 4200 RPM, R8 taper, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & M Machinery Sales Inc, Warren, MI 888-547-4342 (Email: sales@usedmachinerysales.com) Spencer Minns

SWI #DPM-2, 9" x 49" table, 3 HP, Proto-Trak SMX Control, 4200 RPM, R8 taper, 5" Quill, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & M Machinery Sales Inc, Warren, MI 888-547-4342 (Email: sales@usedmachinerysales.com) Spencer Minns

SWI #DPM-3, 10" x 50" table, 31" X, 17" Y, 25" X, 3-15/16" diameter quikk, #40 NST, 70-4200 RPM, 17.3" spindle center to col. face, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

SWI #DPM-3, 10" x 50" table., 3 HP, 30" X, 17" Y, 23.5" Z, Trak Age 3-Axis, #40 PDB, '00, #158241

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

SWI #DPM-5, 12" x 50" table., 40" X, 20" Y, 24" Z, 4.13" Quill diameter, NMTB 40 taper, 4000 RPM, 5 HP, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Southwestern Industries #DPM-SX2P, 2011

  Photo Spec Sheet Video icon
 RFQ
R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

SWI #DPM-V5 ProtoTrak, CNC vert bed mill, 3-Axis VM control, 12" x 50" table, 5 HP, NTMB #40, '05

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Bid Specialists, Inc., Newbury, MA 978-590-6726 (Email: emmalodell@gmail.com) Emma Odell

SWI #DPM-V5, 55" x 12" table., 5 HP, 40" X, 20" Y, 20.5" Z, 4k RPM, Proto-Trak VM, '05, #158347

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

SWI #Trak-2opM11, CNC mill, 18" x 15" table, 3 HP, 14" X, 12" Y, 17" Z, BT30, serial #182DR423

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

SWI #Trak-A.G.E-3 DPM TG 10 Tool Holders and Collets Included, 3 HP, CAT 40, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

SWI #Trak-DPM, vertical bed mill, Trak AGE 3 control, 10" x 50" table, 3 HP, 70-4200 RPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

SWI #Trak-DPM, 10" x 50" table, 30" X, 17" Y, 23.5" Z, Trak AGE 3-axis CNC, 40 NST, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

SWI #Trak-DPM-MX2, 9" x 49" table, 31" travel length, 5 HP, Cat 40, 1996

  Photo
 RFQ
Denver Machine Tool Inc, Littleton, CO 303-795-8302 (Email: Dmtool@comcast.net) Frank Dieveney

SWI #Trak-DPM-RX3, 50" x 10" table, 31" X, 17" Y, 21" Z, #40 tpr, 3 HP/5 HP, power drawbar

  Photo
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

SWI #Trak-DPM-S3, 10" x 50" table, 5 HP, 5000 RPM, DRO, Proto Trak SMX 3 Axis CNC, #8568HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Southwestern Industries #Trak-DPM-S3, CNC vertical mill, 10" x 50" table, 5 HP, Proto Trak SMX CNC control, power draw bar, S40202

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

SWI #Trak-DPM-S3, CNC bed mill, 50" x 10" table, 5 HP, Trak SM control, NMTB40, 2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

SWI #Trak-DPM-S3, 10" x 50" table, Proto Trax SM 3 Axis CNC Control, 5 HP, DRO, #8549HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

SWI #Trak-DPM-SX3, 10" x 50" table, R-8, Proto Trax SMX 3 Axis CNC, 5 HP, DRO, #8547HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

SWI #Trak-DPM-V3, 50" x 10" table, 31" X, 17" Y, 21" Z, #40 tpr, 200-5000 RPM, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

SWI #Trak-FHM-5, 50" x 12" table, 40" x 20" x 24", #40 tpr, Prototrak SMX, '07-08 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

SWI #Trak-K3, 2-Axis CNC miller, 10" x 50" table, 3 HP, Prototrak Edge CNC, 2002, #3943

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

SWI #Trak-K3, Trak SM Control, 10" x 50" table, 32" /16" travel, 3 HP, 4200 RPM, power draw bar, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
S & M Machinery Sales Inc, Warren, MI 888-547-4342 (Email: sales@usedmachinerysales.com) Spencer Minns

SWI #Trak-K3, 10" x 50" table, R-8, 3 HP, 4200 RPM, 2-Axis control, vise, 1999, GP-21041

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

SWI #Trak-K3SX-3, 50" x 10" table, 3-Axis, 32" X, 16" Y, 16" Z, Proto Trak SMX, 3 HP, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

SWI #Trak-K4S, Vert Mill, 10" x 50" table, 32" Long travel, 16.5" cross travel, 16.5" vert knee trvl, Proto Trax SM 2 Axis Control, '02, #8548HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

SWI #Trak-K4SX, CNC vertical mill, 10" x 50" table, 3-Axis CNC K43X-3, SMX Control, 5 HP, 40-5000 RPM, power drawbar, auto lube sys.

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

Southwestern Industries #Trak-KE, CNC vertical mill, 10" x 50" table, 3 HP, Proto Trak EMX CNC control, power draw bar, S40203

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

SWI #Trak-KS-Edge, 2-Axis CNC mill, 10" x 50" table, 3 HP, Prototrak EDGE CNC, Kurt vise, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Timco Inc, Columbia, TN 931-381-1900 (Email: sales@timcoinc.com) Kris Irvin

SWI #Trak-TRM, 2-Axis, 10" x 50" table., 3 HP, 31" X, 17" Y, 23.5" Z, #40, PDB, vise, 1996 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Southwestern Industries #Trak-TRM, MX2 2 CNC, 10" x 50" table, 3 HP, 1995

  Photo
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

SWI #Trak-TRM, 10" x 50" table., 3 HP, 70-4200 RPM, Protorak MX2 2-axis Control, '92, updated '04

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Southwestern Industries machines FOR SALE http://usedprototrakmillsandlathes.com

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

Supermax #1-1/2VA, 3-Axis CNC vertical mill, 9" x 42" table, chrome ways, 2 HP, #10427

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Supermax #YCM-16VS, 9" x 49" table, 37" long., 16" cross, 16" vert., Prototrak control, 1989, #56751

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Tarus #DU-8412, 6' x 10' table., 8 HP, 6k RPM, MachMotion retro-fit, Mach3 interface, 1990

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Tongil #TNV-50, vertical spindle, 10 HP, Fanuc 6MB, 14" x 47" table, (2) units in stock, $5950

  Photo Spec Sheet
 RFQ
Superior Systems Eng. & Mfg, La Mirada, CA 714-522-5151 (Email: klausgoettel4444@gmail.com) Klaus Goettel

Top-Well (H.H.Roberts) #TW-96, 3-Axis bed, Anilam 1400M, 10" x 50" table, 5 HP, '98, #C1776

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

Tos Hulin #MCFP-12, milling machine, 49" x 57" table, Siemens Sinumerik 810 CNC

  Photo Spec Sheet
 RFQ
FMI Trading LLC, Vinton, TX 915-207-5844 (Email: equipmentbuyers@hotmail.com) Frank Friesen

Vectrax #GS-N16V, 3-Axis CNC knee type milling machine, 13" x 46" table, #40 taper, 5 HP, Fanuc OM, power draw bar, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Wells Index #700, 46.5" x 9" T-slot table, 28" long., 12" cr., 2 HP, Summit Dana control, '83, #78211

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Wells Index #860, 4-Axis CNC Mill, 48" x 10" table, 5" quill, 4200 RPM, M-400 Centroid Control, 2018

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Wells Index #860, 3-Axis CNC mill, 10" x 48" table, 4200 RPM, 3 HP, M-400 Centroid control, 2018

  Photo
 Visit Dealer's Equipment Listings  RFQ
Global Machine Brokers LLC, Watertown, CT 860-484-4449 (Email: Joew@globalmachinebrokers.com) Joseph Wihbey

Willis #1654-Microcut, CNC vert bedmill, 16" x 54" table, 7.5 HP, Anilam 3300MK 3-Axis Control, '01

  Photo
 Visit Dealer's Equipment Listings  RFQ
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

Wyssbrod #CNC-7, CNC mill, 3-spindle, 2007, #18324

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

YCM #Supermax-40, knee, 28" X, 15.5" Y, 16" Z, 9" x 49" table., 3 HP, full 3-Axis knee mill, Anilam 3000M, 1989 #13027

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

CNC turret, knee mill, #78939

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

We Buy Used Southwestern Trak Mills & Lathes

 
 Visit Dealer's Equipment Listings  RFQ
R & J Machinery Sales, Milford, MI 248-685-7879 (Email: sales@rjmachinerysales.com) Jeff Bruce

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise