Browse:  Machinery Electrical
RSS Twitter Facebook Linkedin Instagram Blog Surplus Record

CNC MACHINERY & EQUIPMENT:
MACHINING CENTERS, HORIZONTAL, CNC Mills

For over 35 years a Leader in the Machine Tool Ind.
There are 453 listings in this category
Update: Sat, Jul 4, 2020 00:36:20
Advanced Search
Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added
 
 
Original Sort

Atrump #LH-117-Centroid, 24 ATC, 43.3"X, 35"Y, 27"Z, 4500 RPM, 3-Axis, 25 HP, 27.6"x49.6"table, new

 
 Visit Dealer's Equipment Listings  RFQ
Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Averex (AkariI) #HS-450, 25" X, 24" Y, 26" Z, 15.7" x15.7" pallets, Fanuc MPRO-III (31i-B), thru spindle coolant, chip conveyor, 2015, #30741

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Averex #HS-450i, 45.7" pallets, 12000 RPM, Cat 40, full 4th, 80 automatic tool changer, thru spindle coolant, tombstones, Fanuc Control, low hours, 2015, TK-21223

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

Cincinnati #20V120, 80" X, 30" Y, 25" Z, 5-Axis, #50 taper, 3600 RPM, Centroid M400, 1986

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Cincinnati #Geminex-H5-800XT, 5-Axis mill/turn machining center,Acramatic 2100 ctrl

  Photo Spec Sheet
 RFQ
Industrial Machine Tools Inc, Anacortes, WA 360-399-7674 (Email: Josh@industrialmachinetools.com) Josh Tull

Cincinnati #HPC-630XT, 5-Axis CNC horizontal machining center, 41" X, 32" Y, 32" Z, 7000 RPM, Cat 50, 40 automatic tool changer, Acramatic A-2100 CNC controller, 2000, S40302

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Cincinnati #Lamb-HPC-500XT, 20"x20"pllts,10k RPM,1 deg,80 ATC,Siemens 2100,2001

  Photo
 RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Cincinnati #Mag-Mega-5, 56" X, 53" Y, 49" Z, +60/-120 deg head, 31" x31" table, 90 automatic tool changer, Siemens 840D, 2008, #30844

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Cincinnati #Magnum-H5-800AP, CNC HMC,90 ATC,61" X, 47.8" Y, 47.2" Z,24k RPM,Acramatic 2100 Cntrl,2006,#80293

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Cincinnati #Magnum-HPC-800XT, w/Siemens Acramatic 2100 CNC control,180 tool ATC

  Photo Spec Sheet
 RFQ
Industrial Machine Tools Inc, Anacortes, WA 360-399-7674 (Email: Josh@industrialmachinetools.com) Josh Tull

Cincinnati #Magnum-HPC-1000XT, 3 lrg 40"pallets,full 4th Axis,CTS,61"X,49"Y,47"Z,'05

  Photo Spec Sheet
 RFQ
Industrial Machinery NJ, LLC, Livonia, MI 732-367-4130 (Email: indmachinery.tuli@gmail.com) Tuli Simcha

Cincinnati #Maxim-500, HMC,40 ATC,29.5"X,27.6"Y,29.5"Z,7k RPM,19.6"x19.6"pallet,#6826

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Cincinnati #Maxim-630, spare parts & tooling,120 ATC,Acramatic 950 ctrl,tool holders,various parts,1997,#7522

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Cincinnati (Fives) #Mega-5XT, 5-Axis HMC, Siemens 840D CNC, 50 HP, (4) available

  Photo Spec Sheet
 RFQ
Industrial Machine Tools Inc, Anacortes, WA 360-399-7674 (Email: Josh@industrialmachinetools.com) Josh Tull

Cincinnati MAG #Mega-800HP-XT, 120 ATC, 56.1" X, 43.3" Y, 49.8" Z, 6500 RPM, #50, Fanuc 160i, Renishaw OMP-60 probe, 2004

 
 Visit Dealer's Equipment Listings  RFQ
Tight Tolerance Machinery, Peoria, AZ 623-440-7850 (Email: tighttolerancemachinery@gmail.com) John Molander

Cincinnati #T-35, 5-Axis machining center with 6 pallet AWC, 170 automatic tool changer, Acramatic 950MC, 1997, S40435

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Cincinnati Milacron, horizontal machining center, 25 automatic tool changer, 2 indexing tables, S/N 3119A0176-0013, missing controls

 
 RFQ
Park Corp, Pittsburgh, PA 814-330-7034 (Email: mstahl@jscastings.com) Mark Stahl

Daewoo Doosan #Ace-H80, CNC horizontal machining center, 60 automatic tool changer, 49" X, 39.3" Y, 39.3" Z, 4500 RPM, CT 50, 20/25 HP, Vision 380M (AKA Tosnuc 888), 1998, #7552

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Daewoo Doosan #Ace-H500, horizontal machining center, 31.5" X, 25.6" Y, 25.6" Z, 6000 RPM, 60 automatic tool changer, Fanuc 16M, under power

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Daewoo #DHM-500, CNC HMC,60 ATC,31.5"X,25.6"Y,25.6"Z,6000 RPM,25 HP,CAT 50,Fanuc 16iM,2002,#6990

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Daewoo Doosan #DHP-500 Diamond Series, horizontal machining center, 33.4" X, 27.6" Y, 29.5" Z, 12000 RPM, 60 automatic tool changer, Fanuc 16M, CT50, 19.7" x 19.7" pallet, 2001

  Photo
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Daewoo Diamond Series #DHP-630, HMC,39.44"X,33.46"Y,33.46"Z,60 ATC,#50 tpr,2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Dah Lih #HC2000, 78.7"X,39.4"Y,39.4"Z,4500 RPM,120 ATC, 4-Axis,F 0iM,90"x38"tbl,2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Dah Lih #HC2000, 79" X, 39" Y, 39" Z, 120 automatic tool changer, 4500 RPM, 4th Axis 16" r/tbl, Fanuc 0iM, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Dah Lih #MCH-800, Fanuc OiMD, 31.5 dual pallets, 10000 RPM, 30 HP geared head, 53" X, 40" Y, 40" Z, excellent, 2012

  Photo
 RFQ
VTL Solutions Inc, Houston, TX 832-545-4141 (Email: vtlsolutions@aol.com) Sean Moynihan

DMG DMU #340FD, 3400mm X, 3400mm Y, 1600mm Z, 2500mm tbl. size, 1600-1800 mm.HSK-A100 mtr. 12000 RPM, 5-axis

  Photo Spec Sheet
 RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

DMG Mori #DMC340U, 5-Axis portal machine, 110" X, 133" Y, 15000 RPM, 134 HP, Siemens 840D, (4) Pallets, #30664

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

DMG Mori #Deckel Maho DMU 100 P DUOBLOCK, 5 Axis horizontal machining center, 60 automatic tool changer, 39.4" X, 39.4" Y, 39.4" Z, 18000 RPM, CAT 40, Heidenhain iTNC530 3-D Control, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

DMG Mori #MH-630, 120 automatic tool changer, 39.4" X, 41.5" Y, 36.2" Z, 6000 RPM, #50, 40 HP, Fanuc 16M, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

DMG Mori #MH-630, 120 automatic tool changer, 39.4" X, 41.5" Y, 36.2" Z, 6000 RPM, #50, 40 HP, Fanuc 16M, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

DMG Mori #NHX-4000, 40 automatic tool changer, 22" X, 22" Y, 26" Z, 12000 RPM, HSK-A63, 20/15 HP, 2013

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Graff-Pinkert & Co, Oak Forest, IL 708-535-2200 (Email: sales@graffpinkert.com) Lloyd Graff

DMG Mori #NHX-4000-GEN-2, CNC horizontal machining center, 120 automatic tool changer, 22" X, 22" Y, 26" Z, 15000 RPM, Cat 40, 2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

DMG Mori #NHX-4000-GEN-2RPP, HMC,120 ATC,22"X,22"Y,26"Z,15000 RPM,Cat 40,2015,#7512

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

DMG Mori #NHX-5000, 60 automatic tool changer, 28.7" X, 28.7" Y, 28.7" Z, 15000 RPM, #40, 4-Axis M730UM, rigid tap, Renishaw probe MP60, 2017

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

DMG Mori-Seiki #NHX-5000, 60 ATC,29"X,29"Y,35"Z,12k RPM,#40,4-Axis,2014,#81427

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

DMG Mori #NHX-5000, 28.7" X, 28.7" Y, 34.6" Z, 12000 RPM, Cat 40, full B-Axis, Mapps IV, M730BM, 2014

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro

DMG Mori #NHX-5500, 31.5" X, 31.5" Y, 34.6" Z, 12000 RPM, full 4th, thru spindle coolant, 60 automatic tool changer, Cat 50, 2019

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

DMG Mori #NHX-5500/50, 60 automatic tool changer, 31.5" X, 31.5" Y, 34.6" Z, 12000 RPM, 31IB, 2019, #82184

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

DMG Mori #NHX-6300, 60 automatic tool changer, 41.3" X, 35.4" y, 40.6" Z, 8000 RPM, #50, Aeroex ARO-600 oil mist collector, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

DMG Mori #NHX-6300, 60 automatic tool changer, 41.3" X, 35.4" Y, 40.6" Z, 8000 RPM, full 4th, hi-pressure coolant, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

DMG Mori #NHX-6300, 120 automatic tool changer, 41.3" X, 35.4" Y, 40.6" Z, 8000 RPM, #50, LNS Fox WS 2-1020 oil mist collector, chip conveyor, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

DMG Mori #NHX-6300, 120 automatic tool changer, 41.3" X, 35.4" Y, 40.6" Z, 8000 RPM, full 4th, hi-pressure coolant, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

DMG Mori-Seiki #NHX-6300, 120 automatic tool changer, 41.3" X, 35.4" Y, 40.6" Z, 8000 RPM, #50, 2016, #82269

 
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

DMG Deckel Maho #Ultrasonic-70-5, 16 automatic tool changer, 29.5" X, 23.6" Y, 20.5" Z, 18000 RPM, 2006, #158665

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Doosan Daewoo #Ace-100, Fanuc 18i-BM, 39.4" dual pallet, 1 degree, 6000 RPM, 90 automatic tool changer, 2007

 
 RFQ
RMS Machinery, Inc, Cincinnati, OH 800-485-1125 (Email: rudy@rmsmachinery.com) Rudy Skoff

Doosan #DHM-630, HMC,Fanuic 18iMB,39"X,31.5"Y,33.5"Z,6000 RPM,120 ATC,2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Doosan Daewoo #DHP-400, 60 automatic tool changer, 24" X, 22" Y, 22" Z, 14000 RPM, #40, 30 HP, Fanuc 18i-MB, 15.75" pallets, 230 psi thru spindle coolant, chip conveyor, dual chip augers, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Doosan Daewoo #DHP-5000, 60 automatic tool changer, 33.4" X, 27.5" Y, 29.5" Z, 14000 RPM, #40, Fanuc 18i-MB, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Doosan Daewoo #DNM-500, CNC machining center, 40.2" X, 20.3" Y, 20.1" Z, 4th axis, #40 taper spindle, s/n 001866, high pressure coolant, automatic tool changer, chip conveyor, Fanuc I Series, 2013

  Photo Spec Sheet Video icon
 Visit Dealer's Equipment Listings  RFQ Auction item
Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Doosan Daewoo #DNM-500, CNC machining center, s/n 001204, 40.2" X, 21.3" Y, 20.1" Z, 4th axis, #40 taper spindle, coolant, automatic tool changer, chip conveyor, Fanuc I Series control, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ Auction item
Miedema Auctioneering & Appraisals Inc, Byron Center, MI 616-389-6449 (Email: amanda@1800lastbid.com) Amanda Bowers

Doosan Daewoo #HC400, full 4th B-Axis, dual 400mm pallets, Fanuc 32i, 35HP, 10000 RPM, thru spindle coolant with chiller, 60 automatic tool changer, C40 Big Plus, tool probe, 2013

  Photo Spec Sheet
 RFQ
Northeast Precision Machinery Inc, Warminster, PA 215-672-8112 (Email: jim@northeastprecision.com) Jim Reddy

Doosan Daewoo #HC400M, 23" X, 22" Y, 22" Z, automatic pallet changer, probe, mist collector, 2013

  Photo Spec Sheet
 RFQ
Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Doosan #HM-1000, 90 ATC, 82.3"X,49.2"Y,49.2"Z, 6k RPM, #50, Fanuc 31iA, TSC, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Doosan #HM-1000B, 82.3"X,(2) 39.3"x39.3"pllts,90 ATC,#50 Big Plus,F 31iMB,'11,#29391

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Doosan #HM-8000, 90 ATC,49"X,39"Y,39"Z,6000 RPM,TSC,full 4th,only 4500 hrs,2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Doosan Daewoo #HM-8000, 90 automatic tool changer, 49.2" X, 39.4" Y, 39.4" Z, 6000 RPM, #50, 30 HP, Fanuc 31IA, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Doosan Daewoo #HP4000, 23.6" X, 22" Y, 23.6" Z, 14000 RPM, Fanuc 31, 60 automatic tool changer, 1000 psi coolant thru spindle, low hours, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

Doosan #HP5100, 33.5"X,27.6"Y,29.5"Z,19.7"pallets,60 ATC,12000 RPM,Fanuc 3li,2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Doosan Daewoo #HP5100, 60 automatic tool changer, 33.5" X, 27.6" Y, 29.5" Z, thru spindle coolant, 14000 RPM, Cat 50, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Doosan Daewoo #HP5100, 60 automatic tool changer, 33.5" X, 27.6" Y, 29.5" Z, 14000 RPM, #40, 30 HP, 4-Axis, Fanuc 18i-MB, 19.7" x19.7" pallets, thru spindle coolant, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Doosan #HP5100, CNC HMC,Fanuc 31iA,33.5"X,27.6"Y,29.5"Z,Cat 40,CTS,2011 (2)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Doosan Daewoo #HP5100II, 33.4" X, 27.5" Y, 29.5" Z, full B-Axis, 60 automatic tool changer, HSK-63, coolant thru spindle, Fanuc 32i, 2015

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro

Doosan Daewoo #HP5100II, 4-Axis horizontal machining center, 33.5" X, 27.6" Y, 29.5" Z, 14000 RPM, 60 automatic tool changer, Fanuc 31iA, 2015

  Spec Sheet
 RFQ
Machine Tool Emporium, Louisville, KY 502-802-4008 (Email: sales@machinetoolemporium.com) Mark Coxon

Doosan Daewoo #NHM-6300, 60 automatic tool changer, 41.3" X, 33.5" Y, 39.4" Z, 6000 RPM, #50, Fanuc 31I, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Doosan Daewoo #NHM-6300, 60 automatic tool changer, 41.3" X, 33.5" Y, 39.4" Z, 6000 RPM, #50, Fanuc 31I, thru spindle coolant, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Doosan #NHM-6300, 90 ATC,41.3"X,33.4"Y,39.4"Z,8k RPM,full 4th,TSC,2000 hrs,2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Doosan Daewoo #NHM-6300, 90 automatic tool changer, 41.3" X, 33.4" Y, 39.4" Z, 8000 RPM, #50, Fanuc 31i-MB, thru spindle coolant, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Doosan Daewoo #NHM-6300, horizontal machining center, 90 automatic tool changer, 41.3" X, 33.4" Y, 39.4" Z, 8000 RPM, Fanuc 31iB, 2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Doosan Daewoo #NHM-8000, 60 automatic tool changer, 55.1" X, 41.3" Y, 47.2" Z, 6000 RPM, #50, Fanuc 31IB, thru spindle coolant, 2015

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Enshu #630H, CNC horizontal machining center, 60 automatic tool changer, 35.4" X, 31.4" Y, 29.5" Z, Fanuc 16-MA, 24.8" x 24.8" table (2 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Enshu #GE460H, 60 automatic tool changer, 24" X, 24" Y, 24" Z, 15000 RPM, 4-Axis, Fanuc 31iMB, thru spindle coolant 300 psi, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Enshu #JE30S, 19.7" X, 13.8" Y, 11.8" Z, (2)12.5" pllts, 16 automatic tool changer, Fanuc 21iMB, 13000 RPM, 2004, #9753

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Enshu #JE50S, horizontal machining center, 19.7" X, 19.7" Y, 19.7" Z, 19.7" x 19.7" pallets, Fanuc 18iM, 12000 RPM, 40 automatic tool changer, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Enshu #JE80S, 60 ATC,31"X,31"Y,31"Z,15000 RPM,2 pallet,TSC,Fanuc 18iMB,2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

5.9" FPT #M-ARX, 5.9" spindle diameter, 98.4" x 98.4" table, 315" travel col, 118" vertical head, 2-axis attach, floor plates, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
CIM Technologies Inc, Livonia, MI 734-513-2525 (Email: fox@cnc-mills.com) Steve Fox

Fryer #HR-60, horizontal machining center, 24 automatic tool changer, 60" X, 28" Y, 30" Z, 8000 RPM, CAT 40, Anilam 6000 Touch, 2007

 
 Visit Dealer's Equipment Listings  RFQ
Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Email: sales@meridianmachinery.com) Steve Daigle

Fryer #HR-60, CNC horizontal machining center, 24 automatic tool changer, 60" X, 38" Y, 30" Z, 6000 RPM, 50 Taper, Fryer Touch 2100 CNC Control, S/N 60839, #84457

 
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Giddings & Lewis #Orion-1250, 59"X,59"Y,35"Z,5000 RPM,(2) 49"x 49"pallet,1997,#29281

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Giddings & Lewis #Orion-Premier-1250, CNC HMC,120 ATC,59"X,59"Y,35.4"Z,5000 RPM,CAT50,Giddings & Lewis 8000H Ctrl,1997,#7164

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Giddings & Lewis #PC60X, 6",30 HP,5-1150 RPM,40 ATC,Cat 50,2 pallets,remf.w/1 yr.warr.

 
 RFQ
Daniluk Corp, Oklahoma City, OK 405-745-6644 (Email: sales@daniluk.com) Mike Daniluk

Giddings & Lewis #PC60X, 6",30 HP,5-1150 RPM,40 ATC,Cat 50,2 pallets,remf.w/1 yr.warr.

 
 RFQ
Daniluk Corp, Oklahoma City, OK 405-745-6644 (Email: sales@daniluk.com) Mike Daniluk

Giddings & Lewis #RAM-630, Numeripath 8000H,120 ATC,24.8"pallet,35"X,31"Y,29"Z,4-Axis,TSC,'97

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Giddings & Lewis #Ram-630, 5-Axis,dual pallet shuttle,40 ATC,10-12k RPM,'98,#26128

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Grob #G350, 5-Axis univ.,twin 400mm pllts,18k RPM,HSK63",30 ATC,23"X,33"Y,29"Z,F31i

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hindley Machine Tool Sales LLC, Lowell, MI 616-916-5990 (Email: don@hindleymts.com) Don Hindley

Grob #G550, 5-Axis, 31.5" X, 40" Y, 40" Z, 50 automatic tool changer, 24.8x24.8" tbl, 16000 RPM, 71 HP, probe, 2016, #30561

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Grob #G550, 5-Axis universal machining, 31.5" X, 40" Y, 38" Z, HSK-63, 16000 RPM, 120 automatic tool changer, Sinumerick 840D, 2017

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Pride Machinery Sales Inc., Deer Park, NY 631-586-5252 (Email: sales@pridemach.com) Joe Shapiro

Grob #G550, 5-Axis, 31.5" X, 40" Y, 38" Z, 2 APC, 120 automatic tool changer, 16000 RPM, Siemens 840D, thru spindle coolant, #29964

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

GT Trevisan #DS300, 99 ATC, 27.5"X,22.2"Y,23.6"Z, TSC, 5.1"spdl dia., Fanuc 31B, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

GT Trevisan #DS300/70C, 8-Axis CNC HMC & turn center,Fanuc 31B,99 ATC,2015,#18855

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

GT Trevisan #DS300/70C, 8-Axis HMC,27.5"X,22.2"Y,23.6"Z,2800 RPM,Fanuc 31B,'15

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

GT Trevisan #DS600/200C, CNC horizontal machining center, 54 automatic tool changer, 52.7" X, 39.3" Y, 43.3" Z, 2800 RPM, Fanuc 31iA, 2010, #7285

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Haas #EC-300, auto pallet changer, 4-Axis rigid tap thru, 12000 RPM, excellent, 2005

  Photo
 Visit Dealer's Equipment Listings  RFQ
Ryan Machine Co, Santa Clara, CA 408-315-3497 (Email: ptrck887@gmail.com) Pat Ryan

Haas #EC-400, horizontal machining center, 100 automatic tool changer, 22" X, 25" Y, 22" Z, 15000 RPM, Cat 40, thru spindle coolant, WIPS, HSM, 2019

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Haas #EC-300, 4-Axis CNC HMC, 20"X,18"Y,14"Z, (2) 11.8"x11.8"pallets, 8000 RPM, Cat 40, 24 ATC, rigid tap, macros, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Haas #EC-400, 40 side mount tool changer, 20" X, 20" Y, 20" Z, 12000 RPM, #40, 32 BIT, (2) 15.75" squaring pallets, 300 psi thru spindle coolant, 2003, #80436

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Haas #EC-400, CNC HMC, 22"X,25"Y,22"Z,12k RPM,Haas CNC Ctrl,rigid tapping,6 Pallet changer,TSC,2015,#81643

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Haas #EC-400PP, 22" X, 25" Y, 22" Z, 12000 RPM, #40, high-speed, probing, 1000 psi thru spindle coolant, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Haas #EC-500, 40 automatic tool changer, 32" X, 20" Y, 28" Z, 8000 RPM, thru spindle coolant, 1 degree, very clean, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Haas #EC-500, horizontal machining center, 500mm, thru spindle coolant, 300 psi, rigd tapping, 12000 RPM, 40+1 side mount tool changer, 2012

  Photo Spec Sheet
 RFQ
Industrial Machinery NJ, LLC, Livonia, MI 732-367-4130 (Email: indmachinery.tuli@gmail.com) Tuli Simcha

Haas #EC-500, 70 automatic tool changer, 32" X, 20" Y, 28" Z, 12000 RPM, Cat 40, full 4th, thru spindle coolant, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Haas #EC-500, 70 ATC, 32"X,20"Y,28"Z, 12k RPM, #40, 1000 psi TSC, 2008, #158739

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: cncmachines@machineryvalues.com) Jerry Donahue

Haas #EC-500, coolant thru spindle, 12000 RPM, 500mm pallets, #40 taper, 70 automatic tool changer, 1 deg, 15" monitor, '10-'12

  Photo
 RFQ
JMC Machinery Sales Inc, Warren, MI 586-756-8855 (Email: jack@jmcmachinerysales.com) J. Simonetta

Haas #EC-1600, 30 automatic tool changer, 64" X, 40" Y, 32" Z, 7500 RPM, #50, 30 HP, rigid tap, thru spindle coolant, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Haas #EC-1600, horizontal machining center, 50 automatic tool changer, 64" X, 50" Y, 32" Z, 6000 RPM, CT50, full 4th Axis, thru spindle coolant, 2011

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Haas #EC-1600, 30 side mount tool changer, 64" X, 40" Y, 32" Z, 6000 RPM, #50, 30 HP, 300 psi thru spindle coolant, probes, 2006

  Photo
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Haas #EC-1600-4X, full 4th Axis, 64"X,40"Y,32"Z, 36" x 64"pallet, 30 HP, 30 ATC, 2005

  Photo
 RFQ
Equipment Trading Co Inc, Wixom, MI 248-926-0088 (Email: sales@equipmenttrading.com) Don Paul

Haas #EC-1600-4X, HMC,30 ATC,64"X,50"Y,32"Z,CAT50,30 HP,64"x36"tbl,chip conveyor

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Haas #EC-1600-4X, horizontal machining center, hi pressure coolant thru spindle, 30 automatic tool changer, 2 gear box, #50 taper, 30 HP, 2005, 2014 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Haas #EC-1600-4X, horizontal machining center, 50 automatic tool changer, 64" X, 40" Y, 32" Z, 6000 RPM, full 4th Axis, thru spindle coolant, WIPS, 2008

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Haas #EC-1600YZT, 30+1 automatic tool changer, 64" X, 50" Y, 40" Z, 6000 RPM, #50 taper, 30 HP, Haas 32 Bit, rigid tapping, thru spindle coolant, 2014, #7667

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Haas #EC-1600YZT, 30+1 automatic tool changer, 64" X50" Y, 40" Z, #50, rigid tap, 300 psi thru spindle coolant, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Haas #EC-1600YZT, CNC horizontal machining center w/extended Z, 64" X, 50" Y, 40" Z, 50+1 side mount automatic tool changer, coolant thru spindle, 6000 RPM, 64" x 36" table, #50 taper, 2008, #12461

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Haas #EC-1600YZT, 64" X, 50" Y, 40" Z, 10000 RPM, #50, rigid tap, tailstock, 2013, #82225

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Haas #EC-1600ZT, horizontal machining center, 30+1 side mount tool changer, 64" X, 50" Y, 40" Z, 6000 RPM, #50, 30 HP, thru spindle coolant, 2008

  Spec Sheet
 RFQ
Thoroughbred Machinery Inc, Houston, TX 713-822-5858 (Email: glaconis@me.com) G. Laconis

Haas #EC-1600ZT, 50+1 side mount tool changer, 64" X, 50" Y, 40" Z, 7500 RPM, #50, thru spindle coolant, 2017, #81723

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Haas #EC-2000, 40" X, 32" Y, 36" x96" table, 30 automatic tool changer, 4-Axis, 10000 RPM, 30 HP, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

Haas #EC-2000, horizontal machining center, 30 automatic tool changer, 84" X, 40" Y, 32" Z, 6000 RPM, CT50, 30 HP, Haas 32 BIT Control, chip conveyor, coolant thru spindle, Renishaw probe, 2010, #7712

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Haas #EC2000, horizontal machining center, 20 automatic tool changer, 84" X, 40" Y, 32" Z, 10000 RPM, CT 50, 30 HP, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Haas #ES-5, horizontal machining center, 40" X, 18" Y, 22" Z, 40" x15" tbl, full 4th, 12000 RPM, 30 HP, CT-40, 40 automatic tool changer, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
FMT Co, Hubbard, TX 817-714-9839 (Email: fmtco.mike@yahoo.com) Mike Frost

Haas #HS-1, CNC HMC,24 ATC,24"X,20"Y,22"Z,7500 RPM,CT 40,20 HP,Haas 32 BIT ctrl,1997,#7520

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Haas #HS-1RP, 18"X, 18"Y, 18"Z, full 4th, 7500 RPM, CT 40, 24 ATC, 1996

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Haas #HS-1RP, CNC horizontal machining center with full 4th Axis, 24" X, 20" Y, 22" Z, 24 automatic tool changer, 7500 RPM, CT40, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Haas #HS-1RP, 4-Axis HMC, 24"X, 20"Y, 22"Z, 10000 RPM, 15.7"x15.7"table, 24 ATC, Cat 40, 15 HP, 1997

  Photo Spec Sheet
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Haas #HS-1RP, horizontal machining center with full 4th Axis, 24" X, 20" Y, 22" Z, 24 automatic tool changer, 10000 RPM, CT40, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Haas #HS-3, 150" X, 50" Y, 60" Z, 38 automatic tool changer, 5000 RPM, 146" x50" table, Haas CNC, 2009, #30827

  Photo Spec Sheet Video icon
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Heller #MC16, 24.8"X,15.74"x19.68"B-Axis pllts,160 ATC,30 sta.Palletch sys,'00,#27004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Hermle #C52, 5-Axis CNC HMC w/Liebherr pallet handling sys in automation cell,2018 (3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Hitachi-Seiki #HG400, 22" X, 23" Y, 20" Z, (24) 15-3/4" x 15-3/4" pallets, 12000 RPM, 120 automatic tool changer, MARK III Control, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Hitachi-seiki #HG500-II, 50 automatic tool changer, 27.9" X, 26.7" Y, 23.5" Z, #50, Fanuc 15-M, chip, coolant, #BL6913

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand

Huron #MX4, 24000 RPM, HSK 63-A, 750 / 700 / 500 mm travels, Siemens 840D, 2011, #7619

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Hyundai Kia #H63, F18iMB,24.8"pallets,37"X,32"Y,30"Z,8k RPM,Cat 50,60 ATC,TSC,'06

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Hyundai Kia #KH40G, 60 ATC, 22"X,20"Y,20"Z, Fanuc 18iMB, 12k RPM, TSC 1000 psi,'11

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Hyundai Kia #KH63G, 60 ATC,37.4"X,32.5"Y,29.9"Z,8k RPM,CT50,Fanuc 18iMB,'05,#2484

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Hyundai Wia #HS-4000I-C, 80 automatic tool changer, 24.4" X, 22" Y, 25.6" Z, 12000 RPM, #40, Fanuc 32IA, Renishaw probe, 2014, OMI-2T

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Hyundai Wia #KH1000, 90 automatic tool changer, 82.7" X, 53.1" Y, 55.1" Z, 8000 RPM, #50, Fanuc 32IB, 2018

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Hyundai Wia #KH80G, 80 automatic tool changer, 49.2" X, 39.4" Y, 33.5" Z, 4500 RPM, #50, 31IB, rigid tap, 2017

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Ibarmia #THC22, 5-Axis, 63"mill turn table, angle head -15/+195°, 51 HP, Siemens 850D, 60-ATC, 2013, #30650

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

Johnsford #Super-HMC-500-H, 60 ATC, 30"X,26"Y,26"Z, 10k RPM, #50, Fanuc 18iMB

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Kearney & Trecker #Milwaukee-Matic,43"X,34"Y,32"Z,43ATC,(2)31.5"pal.,Delta Dynapath

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Kent USA #JMH-500/800 CNC Horizontal Machining Center, new, #12932, 12933 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Kent USA #KHC-320, Horizontal Machining Center, 15.7" X, 13.7" Y, 13.7" Z, 10000 RPM, Cat 40, 24 automatic tool changer, Fanuc 0iMD, new, #14523

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Kitamura MyCenter #H400, horizontal machining center, 24" X, 20" Y, 20" Z, 10000 RPM, Fanuc 15-M, coolant thru spindle, chip conveyor, S/N 42208, #84442

  Photo
 Visit Dealer's Equipment Listings  RFQ
Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Kitamura MyCenter #H500C, CNC horizontal machining center, Fanuc OM8, 32" X, 32" Y, 24" Z, Cat 50, 40 HP, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Kitamura MyCenter #HX250i, horizontal machining center, 40 automatic tool changer, 12" X, 12" Y, 13" Y, 15000 RPM, BT30, Yasnac Control

  Photo
 Visit Dealer's Equipment Listings  RFQ
TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Kitamura #MyCenter-HX250iF, 12" X, 12" Y, 13" Z, 15000 RPM, 10 HP, 40 automatic tool changer, BT-30, 10" x10" table, 2007 (3 available)

  Photo Spec Sheet Video icon
 Visit Dealer's Equipment Listings  RFQ
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

Kitamura #HX250iG, 40 automatic tool changer, 12" X, 12" Y, 13" Z, 30000 RPM, Arumatik-M, 2018, #82199

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Kitamura #Mycenter-HX250iG, 40 side mount tool changer, 12" X, 12" Y, 13" Z, 30000 RPM, 15 HP, HSK E40, 4-Axis, Renishaw OMP 40-2 probe, 2018

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Kitamura #HX400iF, 50 ATC, 29"X,24"Y,24"Z, 13k RPM, 20 HP, 5-Axis Fanuc 16iMB, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Kitamura MyCenter #HX400iF, HMC,28.9"X,24"Y,24"Z,13k RPM,90 ATC,Fanuc 16iMB,'08

  Photo Spec Sheet Video icon
 Visit Dealer's Equipment Listings  RFQ
ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

Kitamura #HX400iF, Fanuc 16i-MB, (2) 15.75" pllt, 19" X, 24" Y, 24" Z, 13000 RPM, 20 HP, #50 taper, full 4th, thru spindle coolant, conveyor, 2008

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Kitamura #HX500i, 50 automatic tool changer, 34.3" X, 28" Y, 26" Z, 12000 RPM, #50, 4-Axis, Fanuc 16i, thru spindle coolant, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Kitamura MyCenter #HX630i, 50 ATC,39"X,31"Y,32"Z,12k RPM,Fanuc 16iMB,2002,#2560

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Kitamura #HX630i, 50 automatic tool changer, 39.4" X, 31.5" Y, 32.2" Z, 12000 RPM, Cat 50, Fanuc 16iMB, 2007, #18823

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Kitamura MyCenter #HX630i, 39"X,31"Y,32"Z,12k RPM,CT50,100 ATC,F16iMB,'02,#2561

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Kitamura #HX630i, HMC w/Fanuc 16iMB,12000 RPM spindle,2 step geared head,2007

  Photo
 RFQ
Investment Recovery Services, Fort Worth, TX 817-222-9848 (Email: trevor@irsauction.com) Gregg Trenor

Kitamura #HX1000i, 80" X, 52" Y, 54" Z, full 4th w/5th Axis dr, 8000 RPM, Fanuc 16, 150 automatic tool changer, 2011 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

Kitamura #HX1000i, 150 automatic tool changer, 80.1" X, 51.9" Y, 53.9" Z, thru spindle coolant, probe, full 4th, 5th ready, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

Kitamura #HX1000i, CNC orizontal machining center, 150 automatic tool changer, 80.3" X, 51.9" Y", 53.9" Z, 8000 RPM, BT50, Fanuc 16iMB, thru spindle coolant, 2011h

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Kitamura MyCenter #HX1000i, 150 ATC,80.31"X,51.97"Y,53.94"Z,8k RPM,2011,#158295

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7570 (Email: boringmills@machineryvalues.com) David Valitt

Kiwa #KH-41, 40 automatic tool changer, 20.1" X, 20.1" Y, 20.1" Z, 12000 RPM, 15 HP, Fanuc Oi-MD, 2012, #81703

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Kiwa #KH-41, 40 automatic tool changer, 20.1" X, 20.1" Y, 20.1" Z, 12000 RPM, #40, Fanuc Oi-MD, 2008, #81934

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Kiwa #KH-45, 4-Axis 400mm,12000 RPM,60 ATC,Cat 40,Fanuc 31iMA,2008,#103491

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Kiwa #KH-45G, 60 automatic tool changer, 25.2" X, 24" Y, 26.8" Z, 12000 RPM, #40, 30 HP, 4-Axis, Fanuc 32i, 15.75" x 15.75" pallets, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Kiwa #KH-45G, 80 ATC, 25.2"X,24"Y,26.8"Z, 15k RPM, 6 pallet pool, Fanuc 31i-A, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Kiwa #KH-55, 31.5" X, 31.5" Y, 31.5" Z, Cat 50, 10000 RPM, full 4th, Fanuc 31, 120 automatic tool changer, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

Kiwa #KNH-400, CNC horizontal machining center, 120 automatic tool changer, 23.6" X, 23.6" Y, 19.8" Z, 10000 RPM, 4th Axis, Fanuc 18iM, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Kiwa #KNH-400, 120 automatic tool changer, 23.6" X, 23.6" Y, 19.8" Z, 10000 RPM, #40, 4-Axis, Fanuc 18IMB, Renishaw probe, rigid tap, thru spindle coolant, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Kiwa #KNH-400, horizontal machining center, 120 automatic tool changer, 23.6" X, 23.6" Y, 19.8" Z, 10000 RPM, #40, Fanuc 18IM

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
PM Machines, Huntington Beach, CA 714-892-9800 (Email: steve@pmmachines.com) S. Mataviesko

Kiwa #KNH-400, 4-Axis, 24" X, 24" Y, 20" Z, 10000 RPM, 16" pallets, 120 automatic tool changer, Fanuc 18iM, #30641

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Kiwa #KNH-426X, HMC,Fanuc 18iMB,23.6"X,24"Y,26"Z,64 ATC,(2) pallet,12000 RPM

  Photo Spec Sheet
 RFQ
Dominion Air & Machinery Co, Roanoke, VA 540-344-8733 (Email: stevenson@dominionair.com) R. Stevenson

Kuraki #KBT-15DX, 5-Axis CNC horizontal boring mill, 157.5" X, 82.6" Y, 63" Z, 27.6" W, 1997 RPM, 60 automatic tool changer, 5.90" quill dimeter, Fanuc 15M, 1997, #S40344

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Kuraki #KHM-125, HMC,78.74"X,49.21"Y,39.37"Z,60 ATC,12k RPM,Fanuc 160iMC,'01

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Kuraki #KHM-125, 60 automatic tool changer, 78.7" X, 59" Y, 39.3" Z, 12000 RPM, #50, 4 Axis, Fanuc 16MC, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Kuraki #KHM-125, 60 side mount tool changer, 80" X, 59" Y, 39" Z, thru spindle coolant, 12000 RPM, full 4th, probe, scales, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Clark Machinery Sales LLC, Hunt Valley, MD 410-252-5494 (Email: sales@clarkmachinerysales.com) Troy Clark

LeBlond Makino #A-55, 128 automatic tool changer, 22" X, 22" Y, 22" Z, 14000 RPM, Makino Pro 3, 1998, #30406

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

LeBlond Makino #J55, horizontal machining center, Pro 3 CNC, 12 automatic tool changer, 12000 RPM, BT 40, chip conveyor, 1995

  Photo
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

LeBlond Makino #MC65-A40, 4-Axis CNC HMC, 1986

  Photo
 RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

LeBlond Makino #MC-108, 41" X, 31" Y, 31" Z, 31.5" x31.5" pallet, 2-APC, 200 automatic tool changer, Makino Pro3 CNC control, #30588

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

LeBlond Makino #MCB-1513, 59" X, 51" Y, 39" Z, 39.4" x39.4" pallet, 2-APC, 200 automatic tool changer, Makino Professional 3 CNC, #30589

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Machining Systems #MS200, 39"x39"pllt,78"X,58"Y,58"Z,30 HP,3k RPM,Fanuc CNC,'06

  Photo
 Visit Dealer's Equipment Listings  RFQ
Opincar Machinery, Smyrna, TN 615-459-7983 (Email: tom@opincarmachinery.com) Tom Opincar

MAG #NBH 6+, 60 automatic tool changer, 41.3" X, 35.4" Y, 39.3" Z, 10000 RPM, ANSI #50, Siemens 840D, 2011, #DI-106

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

MAG #XS211, (2) machhines available, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Makino #A100E, 132 automatic tool changer, 71" X, 52" Y, 35" Z, 12000 RPM, #50, Fanuc 310I Pro 5, thru spindle coolant, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A40, CNC horizontal machining center, 40 automatic tool changer, 22" X, 25" Y, 25" Z, 12000 RPM, Cat40, 15.75" pallets, #5593

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Makino #A51, Pro 3, 22" X, 22" Y, 23.6" Z, 33HP, 12000 RPM, CT40, dual 400mm pallet, 60 automatic tool changer, 2004

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Makino #A51, 60 ATC, 22"X,22"Y,23.6"Z, Fanuc 18iM, 4-Axis, #40, 12k RPM, TSC, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Makino #A51, 60 automatic tool changer, 22" X, 22" Y, 23.6" Z, 12000 RPM, #40, 25 HP, Professional 5, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A51, 60 automatic tool changer, 22" X, 22" Y, 23.6" Z, 12000 RPM, #40, 25 HP, Professional 5, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A51, 60 ATC, 22"X,22"Y,24"Z, Fanuc 18iM, 4-Axis, #40, 12k RPM, TSC, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Makino #A51NX, 4-Axis CNC HMC, Fanuc 31i, 22"X,25"Y,25"Z, 14000 RPM, 60 ATC, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Makino #A51NX, 60 automatic tool changer, 22" X, 25.2" Y, 25.2" Z, 14000 RPM, 25 HP, #40, Fanuc 31iM Pro 5, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A51NX, HMC,22"X,25.2"Y,25.2"Z,14k RPM,15.75"x15.75"pallet,60 ATC,2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Works Inc, Saukville, WI 262-284-5611 (Email: bob@machwksinc.com) Bob Wescott

Makino #A51NX, CNC horizontal machining center, 22" X, 25.2" Y, 25.2" Z, 14000 RPM, #40 taper, 60 automatic tool changer, 15.7" x15.7" pallet, 2018

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Makino #A51NX, CNC horizontal machining center, 133 automatic tool changer, 22" X, 25.2" Y, 25.2" Z, 14000 RPM, HSK-A63, 2018

 
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Makino #A55, 40 ATC, 22"X,22"Y,22"Z, 14k RPM, #40, 30 HP, Professional 3, 4-Axis rotary tbl, 1998, #80235

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Makino #A55, 22"X,22"Y,24"Z,(2) 15.75"x15.75"pllts,40-ATC,Fanuc 0-Mc,'93,S30057

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Makino #A55, 22" X, 20" Y, 20" Z, 128 automatic tool changer, 30 HP, 20000 RPM, 4th Axis table, chip conveyor, tool probe

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Makino #A55E, 225 ATC, 22"X,22"Y,23.6"Z, 14k RPM, Makino Pro3, #40, 2002, #81628

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Makino #A61, 4-Axis CNC HMC,60 ATC,28.7"X,25.6"Y,28.7"Z,12K RPM,CAT40,full 4th,2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Makino #A61, 28.7" X, 25.6" Y, 28.7" Z, 12000 RPM, 60 automatic tool changer, Fanuc Pro 3 CNC, Cat 40, (2) 19.7" x 19.7" pallets, 2004 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Makino #A61, 4-Axis CNC HMC,60 ATC,28.7"X,25.6"Y,28.7"Z,12k RPM,Cat 40,full 4th,2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Makino #A61NX, 60 automatic tool changer, 28.7" X, 25.6" Y, 31.5" Z, 14000 RPM, HSK 63, Prof 6, '11/'16 (4 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Makino #A71, 28.7" X, 28.7" Y, 31.5" Z, 20" x20" pallets, 10000 RPM, #50 taper, 60 automatic tool changer, coolant thru spindle, Pro 3, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Makino #A71, 28.7"X, 28.7"Y, 31.5"Z, (2) 19.7" x 19.7" pallets, 4-Axis, 10000 RPM, 60 ATC, 1000 psi, 50 taper, 2008

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Makino #A71, 4-Axis, 28" X, 28" Y, 31" Z, 137 automatic tool changer, 10000 RPM, 20" x20" pllts, Cat 50, thru spindle coolant, 2005, #30197

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Makino #A71, HMC,28.7"X,28.7"Y,31.5"Z,10k RPM,50 Taper,Makino Professional 5 CNC Ctrl,2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Makino #A71NX, horizontal machining center, 31" X, 29" Y, 32" Z, 20000 RPM, 60 automatic tool changer, Pro 6 control, thru spindle coolant, 2019

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

Makino #A77, horizontal machining center, 31.5" X, 29.5" Y, 30.3" Z, (2) 24.8" x24.8" pallets, 10000 RPM, 40 automatic tool changer, coolant thru spindle, 1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Makino #A77, 31.5"X,29.5"Y,30.3"Z,10000 RPM,HSK100,40 HP,40 ATC,Professional 3 Ctrl,1997,#7083

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Makino #A77, 31.5"X, 29.5"Y, 30.3"Z, Pro-3 Fanuc 16M, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

Makino #A81, 60 ATC, 35.4"X,31.5"Y,40.2"Z, #50, 10k RPM, Fanuc 310I Pro 5, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A81, Pro 5 control, 35" X, 31" Y, 40" Z, Cat 50, 2008

  Photo
 RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Makino #A81, Fanuc 310i Pro5, 35.4" X, 31.5" Y, 40.2" Z, (2) 24.8" x24.8" pallet, 10000 RPM, 2007

  Photo Spec Sheet
 RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

Makino #A81-NX, 60 automatic tool changer, 35.4" X, 35.4" Y, 40 10k RPM, Cat 50, Pro 6 Control, full 4th, thru spindle coolant, 2017

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Makino #A82, 60 ATC, 43.3"X,32.3"Y,40.1"Z, 10k RPM, #50, Fanuc 310I Pro 5, TSC, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Makino #A88, 35.4"X,31.5"Y,38.2"Z,Pro 3 CNC,90 ATC,#50 taper,12000 RPM,chip conv.(3)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

Makino #A99, 4-Axis CNC horizontal machining center, 39" X, 39" Y, 37" Z, 120 automatic tool changer, coolant thru spindle, Fanuc 16i, Cat 50, 2002, reconditioned 2019, S39302

 
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Makino #MC-1513-A60, 59" X, 51.1" Y, 39.37" X, 41-1/2x41-1/4" pallet, Fanuc 6MB, 64 automatic tool changer, 1985

  Photo Spec Sheet
 RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

Makino #T2, 5-Axis,78"X,78"Y,71"Z,120 ATC,4000 RPM,39"x49"pallet,2014

 
 Visit Dealer's Equipment Listings  RFQ
Meridian Machinery Inc., Kenosha, WI 262-854-5054 (Email: sales@meridianmachinery.com) Steve Daigle

Makino #T2, HMC,120 ATC,78.7"X,78/7"Y,70.8"Z,4000 RPM,5-Axis,Pro-5 Ctrl,2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Makino #T2, CNC horizontal machining center, 78.7" X, 78.7" Y, 70.9" Z, 4000 RPM, Pro Series 5 CNC w/CRT, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Mandelli #7U/400, hrz/vrt spdl,40"X,32"Y,41"Z,4-Ax,12rpm,200atc,Siemens,'97,#25055

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mandelli, CNC horizontal machining center, 60 automatic tool changer, 78" X, 79" Y, 64" Z, 3000 RPM, #50 taper, 39" x 80" table, GE Fanuc 15M 5-Axis Control, box way, tooling, chip conveyor

 
 RFQ Auction item
U S Industrial Auctions, Bay Shore, NY 516-819-6951 (Email: steve@usindustrialauctions.com) Steven Bankin

Matsuura #H-Plus-405, horizontal machining center, 25.9" X, 25.9" Y, 23.9" Z, 12000 RPM, G-Tech 311 Fanuc Control, 2013

  Photo Spec Sheet
 RFQ
Generation Machine Tools, Bradenton, FL 800-638-8888 (Email: sales@generationmachinetools.com) Matthew Schulman

Matsuura #HPlus-300, 30 automatic tool changer, 19.6" X, 19.6" Y, 19.6" Z, 15000 RPM, #40, Fanuc G-Tech 16I, thru spindle coolant, 2004

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Matsuura #HPlus-300PC-11, 180 automatic tool changer, 19.6" X, 22" Y, 19.6" Z, Fanuc 16i, 2005, #82206

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Matsuura #MAM72-100H, 5-Axis, 41.3" X, 36.2" Y, 27.8" Z, 12000 RPM, Cat 50, G-Tech 30i, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

Matsuura #MAM500HG-PC11, 240 automatic tool changer, 19.6" X, 18.5" Y, 17.7" Z, 15000 RPM, BT40, 2002, #81826

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Maut #EM34, 157"X,78"Y,39"Z,A/B-Axis head,40atc,10k RPM,Heidenhain 530i,'06,#22829

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mazak #Nexus-6800-II, Matrix CNC, 41.3" X, 31.5" Y, 34.7" Z, 240 automatic tool changer, 24.8" x 24.8" 16 APC, chip conveyor, 2011, #30700

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mazak #FH-480, 60 ATC, 22"X, 22"Y, 20"Z, 30 HP, 12000 RPM, M-Plus CNC, 1996

 
 RFQ
Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Mazak #FH-480, horizontal machining center, 22" X, 22" Y, 20" Z, 12000 RPM, 60+1 automatic tool changer, Cat 40, 1997, #15112

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Mazak #FH-580/40, 60 ATC, 27.95"X,24.02"Y,25.98"Z, #40, 12k RPM, 4-Axis,'98,#157615

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: cncmachines@machineryvalues.com) Jerry Donahue

Mazak #FH-580/40N, CNC horizontal machining center, (2) 19.6" x 19.6" pallets, Cat 40, 25000 RPM, Mazatrol M Plus CNC, chip conveyor, transformer, 1995, S40409

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Mazak #FH-680, horizontal machining center, Mazatrol M Plus, 41.3" X, 31.5" Y, 31.5" Z, 6 pallet changer 24.8" x24.8", 80 automatic tool changer, #50 taper, 10000 RPM, 40 HP, Renishaw "B" probe, thru spindle coolant, Barnes Kleen-All chip conveyor, 1997

  Photo
 RFQ
Northeast Precision Machinery Inc, Warminster, PA 215-672-8112 (Email: jim@northeastprecision.com) Jim Reddy

Mazak #FH-880, CNC HMC,80 ATC,51.18"X,43.31"Y,39.37"Z,7000 RPM,CAT 50,1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #FH-880, 120 automatic tool changer, 51.5" X, 43.3" Y, 39.3" Z, 7000 RPM, 40 HP, Mazatrol M-Plus Control, 1998

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Mazak #FH-4000, CNC horizontal machining center, 40 automatic tool changer, 24.8" X, 22" Y, 20" Z, Mazatrol PC-Fusion-CNC 640M controller, thru spindle coolant, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #FH-4000, 80 ATC,22.04"X,20.07"Y,24.83"Z, 12k RPM, #40, Mazatrol Fusion 640M, 2001, #80175

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mazak #FH-4000, 80 ATC, 22.04"X,20.07"Y,24.83"Z, 12000 RPM, Fusion 640, chip, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Mazak #FH-4800, 40 ATC,22"X,24"Y,22"Z,12000 RPM,CT40,Mazatrol Fusion 640 ctrl,chip conveyor,1999,#6845

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Mazak #FH-4800, 40 automatic tool changer, 22" X, 24" Y, 23.6" Z, 12000 RPM, Fusion 640M Control, coolant thru spindle, chip conveyor, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Mazak #FH-4800, 60 ATC,22"X,22"Y,20"Z,12k RPM,#40,M-Plus,(2) 16"x16"pallets,1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mazak #FH-4800, Fusion 640M,CTS,15.75"pallets,(12) pallet system,120 ATC,#28943

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mazak Power Center #H-20, retrofit with new Hust H4CL-M control, 43.3" X, 33.4" Y, 29.5" Z, 30 stations, 3150 RPM, ISO NT50, 1986/2010 electronics, $19,500.00, #3996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

Mazak #H-800, horizontal machining center, 80 automatic tool changer, 15000 RPM, 49" X, 39" Y, 33" Z, full 4th axis, 1995, reconditioned 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mazak Nexus #HCN-4000II, 60 automatic tool changer, 22" X, 24.8" Y, 25.2" Z, 12000 RPM, #40, thru spindle coolant, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak Nexus #HCN-4000II, 80 automatic tool changer, 22" X, 24.8" Y, 25.2" Z, 12000 RPM, #40, thru spindle coolant, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-4000III, 80 automatic tool changer, 22" X, 25.2" Y, 25.2" Z, 18000 RPM, #40, 40 HP, thru spindle coolant, 2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-5000II, 60 automatic tool changer, 28.7" X, 28.7" Y, 28.7" Z, 12000 RPM, #40, 40 HP, 2008

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ Auction item
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-5000-II, 60 automatic tool changer, 12000 RPM spindle, 28.7" X, 28.7" Y, 29.1" Z, 19" x19" pallet, 4-Axis, probe, 2008

  Photo Spec Sheet
 RFQ
Badger Machine & Equipment, Milwaukee, WI 414-405-4103 (Email: gary@badgermachine.com) Gary Hohl

Mazak Nexus #HCN-5000II, 60 automatic tool changer, 28.7" X, 28.7" Y, 29.1" Z, 18000 RPM, #40, 40 HP, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-5000II, 28.7" X, 28.7" Y, 29.1" Z, 18000 RPM, #40 taper, full 4th Axis, coolant thru spindle, 60 automatic tool changer, Matrix CNC, (2) 20" x20" pallets, nice, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Mazak Nexus #HCN-5000II, Mazatrol Matrix Nexus, 19.69" pallet, 28.7" X, 28.7" Y, 29.1" Z, 18000 RPM, 60 ATC, chip conveyor, 2008

  Photo Spec Sheet
 RFQ
Industrial Machinery NJ, LLC, Livonia, MI 732-367-4130 (Email: indmachinery.tuli@gmail.com) Tuli Simcha

Mazak #HCN-6000, 19.7x19.7" pllts, 43 automatic tool changer, Cat 50, 31.5" X, 31.5" Y, 31.5" Z, Fusion, 10000 RPM, 2005

  Photo Spec Sheet
 RFQ
John Stineman Sales LLC, Cincinnati, OH 513-478-2357 (Email: Toolmgr@aol.com) John Stineman

Mazak Nexus #HCN-6000, 43 automatic tool changer, 31.5" X, 31.5" Y, 315" Z, 10000 RPM, CAT 50, 50/40 HP, rigid tapping, chip conveyor, Mazatrol Fusion 640M Control, 2005, #7615

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Mazak #HCN-6000, 80 automatic tool changer, 31.5" X, 31.5" Y, 31.5" Z, 7000 RPM, #50, Fusion 640M, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak Nexus #HCN-6000II, 43 automatic tool changer, 31.5" X, 31.5" Y, 31.5" Z, 10000 RPM, #50, Fusion Pro, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-6000II, 43 ATC, 31.5" X, 31.5" Y, 31.5" Z, 10000 RPM, #50, Mazatrol 640M Nexus control, thru spindle coolant, Renishaw probing, 2004/2005, #13230 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Mazak #HCN-6000II Nexus, 31.5" X, 31.5" Y, 31.5" Z, 19.6" x19.6" dual pallet, 7000 RPM, 60 automatic tool changer, 2006

  Photo Spec Sheet
 RFQ
Centra Corporation, Perry Hall, MD 410-945-0040 (Email: ed@centracorp.com) Ed/Mike/Thomas

Mazak #HCN-6000II, 2-pallets, Maz. Matrix Nexus Control, 31.5" X, 31.5" Y, 31.5" Z, 60 automatic tool changer, 40 HP, Cat 50 taper, 2006, #24269

  Photo Spec Sheet
 RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

Mazak Nexus #HCN-6000II, 500mm, 2 pallets, 60 automatic tool changer, thru spindle coolant, MP7000 probe, APC, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Resell CNC LLC, Maitland, FL 844-478-8181 (Email: sales@resellcnc.com) John Butz

Mazak #HCN-6800, horizontal machining center, Mazatrol Matrix Nexus, 41.3" X, 35.4" Y, 38.5" Z, 10000 RPM, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mazak #HCN-6800II 2-Level, 240 automatic tool changer, 41.3" X, 35.4" Y, 38.5" Z, 10000 RPM, #50, thru spindle coolant, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-10800, 39.37"x39.37",2-pallet,8k RPM,120 ATC,TSC,Matrix Nexus 2,'13

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Mazak #HCN-12800II, 120 automatic tool changer, 86.6" X, 62.9" Y, 72.8" Z, 8000 RPM, HSK A100, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HCN-12800II, 86" X, 63" Y, 72" Z, 49.21" pllts, Matrix Nexus 2, 160 automatic tool changer, 2013, #30547

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mazak #HCN-12800II, 160 automatic tool changer, 86.6" X, 62.9" Y, 72.8" Z, 8000 RPM, #50, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #HTC-400, 30 automatic tool changer, 22" X, 20" Y, 20" Z, 10000 RPM, #40 taper, Mazatrol M-Plus Control, Renishaw probe, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #HTC400, 30 ATC,22"X,20"Y,20"Z,10000 RPM,CT40,Mazatrol M-Plus,coolant system,1998,#6843

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Mazak #Integrex-e-1060V/8II, 160 ATC, 73.8"X,41.73"Y,52.95"Z, 15000 RPM, TSC, 2009, #13242

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Mazak #PFH-4800, 22" X, (2) 15.75" pllts,.001°, Fusion 640M, 40 automatic tool changer, thru spindle coolant, 15000 RPM, #30493

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mazak #PFH-4800, 80 ATC, 22"X,24.6"Y,23.6"Z, 15000 RPM, BT40, Mazatrol 640M, TSC, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Mazak #PFH-5800, 120 automatic tool changer, 28.7" X, 28.7" Y, 29" Z, 15000 RPM, Cat 40, Mazatrol 640M, 2004

  Photo
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Mazak #PFH-5800, Palletech, 120 automatic tool changer, 28.7" X, 28.7" Y, 29.1" Z, 15000 RPM, #40, 640M, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mazak #Powercenter-H-20, CNC horizontal machining center, 31.5" x 31.5" table, Fanuc 6M, S/N M-50115

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Peterson Machinery Sales, Casa Grande, AZ 231-944-4927 (Email: machine@petersonmachinery.com) Andrew Peterson

Mazak #Vortex-1400/160, 120 automatic tool changer, 157.4" X, 55" Y, 24" Z, 10000 RPM, #50, Fanuc 15IM, 2001

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mighty Viper #HMC-500, horizontal machining center, Fanuc 18M, thru spindle coolant, 21.7" X, 20" Y, 23.6" Z, 40 ATC, 10000 RPM, (2) 19.7" pallets, 4th Axis rotary, 2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Mighty Viper #VMC1230AG, horizontal machining center, 50" X, 25" Y, 25" Z, 20 automatic tool changer, 6000 RPM, #50 taper, Magic Pro 64 CNC, 2000

  Photo
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Mitsubishi #M-H4B, 40 ATC, 25.6" X, 25.6" Y, 25.6" Z, 12000 RPM, CAT40, Mitsubishi Meldas 520AMR Control, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mitsubishi #M-H4B/16, Meldas Control, 15.9" pallets, 25.6" X, 25.6" Y, 25.6" Z, 12000 RPM, 40 automatic tool changer, 1996

  Photo Spec Sheet PDF icon
 RFQ
FMT Co, Hubbard, TX 817-714-9839 (Email: fmtco.mike@yahoo.com) Mike Frost

Mitsubishi #M-H5A, CNC horizontal machining center, 28" X, 24.8" Y, 23.6" Z, 5000 RPM, Cat 50, coolant thru spindle, tombstone, 1995

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitsubishi #M-H60, 9 ATC,39"X,31"Y,31"Z,F16M,24.8"pallets,4000 RPM,25 HP,TSC,'96

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Mitsubishi #M-H80EN, CNC horizontal machining center, (2) 31.5" x 31.5" pallets, Cat 50, Fanuc 18iM, 60 pocket automatic tool changer, 2001, S40576

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Mitsubishi #M-H600, 5-Axis CNC HMC, 1998

  Photo
 Visit Dealer's Equipment Listings  RFQ
Revolution Machine Tools Inc, North Salt Lake, UT 385-321-3934 (Email: kyle@rmtus.com) K. Jorgenson

Mitsui-Seiki #HS-5A, 24.8" x 24.8"pallets, .001 Deg, Fanuc 15M, 180 ATC, TSC, #28884

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mitsui-Seiki #HT3A, 21"X,19"Y,19"Z, 20000 RPM, 120 ATC, Fanuc 15MB, 1995, #80489

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mitsui-Seiki #HU40T, 5-Axis,24"X,22"Y,28"Z,60 APC,240 ATC,15k RPM,F15M,'04,#28787

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mitsui-Seiki #HU50A, CNC horizontal machining center, 4-Axis, 28" X, 28" Y, 26" Z, 12000 RPM, BT-40, 240 automatic tool changer, Fanuc 30iB, 10 pallets, chip conveyor, 2014

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Mitsui-Seiki #HU63A, 4-Axis CNC horizontal machining center, 39.4" X, 31.4" Y, 31.4" Z, 6000 RPM, coolant thru spindle, Fanuc 30iA, 120 automatic tool changer, #50 taper, 2006

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Monnier & Zahner #M621 Thread Whirler, Fanuc 18M,auto load/unload, excellent, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Hardy Machinery Inc, Huntsville, AL 256-536-1319 (Email: ron@hardymachinery.com) Ron Hardy

Mori-Seiki #MH-50, 60 ATC, 27.95"X,24.02"Y,23.62"Z, 6k RPM, #50, MF-M6, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Mori-Seiki #MH-50U, 5-Axis CNC HMC,Mori ctrl MF M6 (Fanuc 16M),60 pos.ATC,1997

  Photo Spec Sheet
 RFQ
Industrial Machinery NJ, LLC, Livonia, MI 732-367-4130 (Email: indmachinery.tuli@gmail.com) Tuli Simcha

Mori-Seiki #MH-63, 40"X,41"Y,30"Z, (2) 25"x25"pallets, Cat 50, Fanuc 16M, 1996, #30275

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mori-Seiki #MH-63, 60 automatic tool changer, 39.3" X, 33.4" Y, 36.1" Z, 6000 RPM, Cat 50, 40 HP, 1994

  Photo Spec Sheet Video icon
 Visit Dealer's Equipment Listings  RFQ
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

Mori-Seiki #MH-63, CNC horizontal machining center, 120 automatic tool changer, Cat 50, MSC-516 CNC, (2) 24.75" pallets, S40581 (3 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Mori-Seiki #MH-630EXT-Y, 60 automatic tool changer, 39.4" X, 41.5" Y, 36.2" Z, 6000 RPM, Fanuc 16MB, Cat 50, coolant thru spindle, 2000

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Mori-Seiki #MH-1003, CNC horizontal machining center, 80.3" X, 60.8" Y, 47.2" Z, 6000 RPM, Mori Fanuc MSG 502 CNC Control, thru spindle coolant, chip conveyor, 2002, #1799920

  Photo
 Visit Dealer's Equipment Listings  RFQ
G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Mori-Seiki #NH-4000DCG, 60 ATC,22"X,22"Y,24.4"Z,14k RPM,#40,Fanuc MSX-701III,'06

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mori-Seiki #NH-4000DCG, 60 ATC,22"X,22"Y,24.4"Z,14k RPM,#40,Fanuc MSX-701III,2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mori-Seiki #NH-4000DCG, 22" X, 22" Y, 24.8" Z, 14000 RPM, 60 automatic tool changer, full 4th, 12/2006

  Video icon
 Visit Dealer's Equipment Listings  RFQ
Prime Machinery Inc, Huntington, NY 516-922-7977 (Email: sales@primemach.com) Steve Brenner

Mori-Seiki #NH-4000DCG, 60 automatic tool changer, 22" X, 22" Y, 24.8" Z, 14000 RPM, MSX-501III, 2006, #159814

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: cncmachines@machineryvalues.com) Jerry Donahue

Mori-Seiki #NH-5000, 120 automatic tool changer, 24.8" X, 23.6" Y, 26.4" Z, 14000 RPM, #40, MSG-501, #BL6821

 
 RFQ
McKean Machinery Sales Inc, Brook Park, OH 216-761-7011 (Email: Jbrand@mckeanmachinery.com) John Brand

Mori-Seiki #NH-5000/40, 60 ATC, 24.8"X, 23.62"Y, 26.38"Z, 14000 RPM, 40 taper, 2002

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Mori-Seiki #NH-5000/40, 60 ATC, 24.8"X, 23.62"Y, 26.38"Z, 14000 RPM, 40 taper, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Mori-Seiki #NH-5000/40, 60 ATC, 24.8"X, 23.62"Y, 26.38"Z, 14000 RPM, 40 taper, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Mori-Seiki #NH-5000/40, 60 automatic tool changer, 24.8" X, 23.6" Y, 26.4" Z, 14000 RPM, #40, MSC-501, 2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Mori-Seiki #NH-6300, 60 automatic tool changer, 41.3" X, 35.4" Y, 38.6" Z, 10000 RPM, Cat 50, Fanuc 31i, 2008 (2 available)

 
 RFQ
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Mori-Seiki #NH-6300DCG-II, 120 automatic tool changer, 41" X, 35" Y, 39" Z, #50, 10000 RPM, thru spindle coolant, 2011, #81341

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #NH-6300DCG-II, 120 automatic tool changer, 41.3" X, 35.4" Y, 38.6" Z, 8000 RPM, MSX701IV, #50 taper, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mori-Seiki #NH-6300DCG-II, 120 ATC,41.3"X,35.4"Y,38.6"Z,10k RPM,#50,MSX 701IV,'11

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #NH-6300DCG-II, 120 ATC, 41.3"X,35.4"Y,38.6"Z, 10k RPM, MSX 701IV, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #NHX-4000, horizontal machining center, 40 automatic tool changer, 22" X, 22" Y, 26" Z, 12000 RPM, CAT 40, full 4th Axis, 2011

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mori-Seiki #NHX-4000, CNC horizontal machining center, 22" X, 22" Y, 26" Z, 12000 RPM, 40 automatic tool changer, Cat 40, Mitsubishi 730BM w/MAPPS IV CNC control, thru spindle coolant, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Mori-Seiki #NHX-4000, 22" X, 22" Y, 26" Z, 60 automatic tool changer, 12000 RPM, 15.7" x15.7" pallets, Cat 40, 2011, #52945

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

Mori-Seiki #NHX-5000, 28.7"X, 28.7"Y, 33.5"Z, 12000 RPM, 60 ATC, full 4th, 2016

  Photo Spec Sheet
 RFQ
Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Mori-Seiki #NHX-5000, 60 automatic tool changer, 29" X, 29" Y, 35" Z, 12000 RPM, #40, 1000 psi thru spindle coolant, 2012, #82150

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #SH-63, CNC HMC,60 ATC,33"X,30"Y,33"Z,10000 RPM,CAT 50,40 HP,#5476

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Mori-Seiki #SH-400, 60 ATC, 22"X,20.1"Y,20.1"Z, 2-pallet, 12k RPM, #40, TSC, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Mori-Seiki #SH-400, CNC horizontal machining center, 22" X, 20" Y, 20" Z, 12000 RPM, MSC-501 CNC, (2) 15.75" x 15.75"pallets, #40 taper, 1998, #S40359

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Mori-Seiki #SH-500, 24.8"X,23.6"Y,25.6"Z,(2) 19.7"x19.7"pllts,12k RPM,40-ATC,#30422

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mori-Seiki #SH-500, 24.8" X, 23.6" Y, 25.6" Z, (2) 19.7" x19.7" pllts, 12000 RPM, 40-ATC, #30495

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mori-Seiki #SH-500, 24.8" X, 23.6" Y, 25.6" Z, (2) 19.7" x19.7" pllts, 12000 RPM, 40 automatic tool changer, #30494

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Mori-Seiki #SH-500, 6-pallet, 125" X, 72" Y, 43" Z, 8000 RPM, BT-50, 80 automatic tool changer, 1998

  Photo
 RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Mori-Seiki #SH-630, 60 ATC, 33.1"X,29.9"Y,33.1"Z, 10k RPM, #50, MSC-516, TSC, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Mori-Seiki #SH-633, 60 automatic tool changer, 33" X, 29" Y, 33" Z, 10000 RPM, #50, 40 HP, 2001, #81830

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #SH-633, CNC HMC,33"X,29"Y,33"Z,Cat 50,120 ATC,24.8" x 24.8"pallet,40 HP,S40285

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Mori-Seiki #SH-633, horizontal machining center pallets, 24.8" x 24.8", 2001, S40810 (9 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Mori-Seiki #SH-8000, horizontal machining center, 51" X, 47" Y, 43" Z, 10000 RPM, 60 automatic tool changer, MSG-501 CNC, 2004, S40921

 
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Mori-Seiki #SH-8000, 60 ATC, 51.2"X,47.1"Y,43.3"Z, 6k RPM, #50, 50 HP, 2001, #81831

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mori-Seiki #SH-8000, 51.2"X,47.2"Y,43.3"Z,15000 RPM,60 ATC,Fanuc 18iMA,2001,#6993

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Mori-Seiki #SH-8000, 51.2"X,47.2"Y,43.3"Z,15000 RPM,Fanuc 18iMA,60 ATC,2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Ditter Industries Inc, Lake Villa, IL 847-265-1075 (Email: ditterind@gmail.com) Jerry Ditter

Mori-Seiki #SV-50B/40, 30 automatic tool changer, 31.5" X, 20" Y, 20" Z, 10000 RPM, #40 taper, Fanuc 18M, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

MS Machinery Sys #HMC200, 120"X,58"Y,64"Z,76 ATC,w/tool changer,4 pallet changer,'97

  Photo
 RFQ
Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

Niigata #HN63C, CNC HMC,60 ATC,39.37"X,33.46"Y,29.52"Z,6500 RPM,CT50,Fanuc 15M,1995,#7430

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Niigata #HN63C, 4-Axis CNC HMC,24.8"x24.8",39"X,33.5"Y,29.5"Z,#50 tpr,6500 RPM

  Photo Spec Sheet PDF icon
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Niigata #HN80D, horizontal machining center, 60 automatic tool changer, 52" X, 52" Y, 40" Z, 6000 RPM, Cat50, coolant thru spindle, Fanuc 16MB, 2001

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Niigata #HN80D, 60 automatic tool changer, 60.2" X, 48.4" Y, 40.1" Z, 8000 RPM, full 4th Axis, Fanuc 16i-MB, 2004

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Niigata #HN80D, 60 ATC ,60.2"X,48.4"Y,40.2"Z, #50, 6k RPM, TSC, Fanuc 160i, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Niigata #HN1250S, 4-Axis, 86" X, 70" Y, 47" Z, 330 automatic tool changer, 15000 RPM, 50 HP Big Plus spindle, Brand new 2015

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Niigata #SPN-40, 60 automatic tool changer, 23.6" X, 22.8" Y, 22" Z, 12000 RPM, #40, 30 HP, Fanuc 16iM, 1996

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Niigata #SPN50A, 60 automatic tool changer, 29.5" X, 29.5" Y, 29.5" Z, 12000 RPM, 4-Axis, Fanuc 16iMB, Cat 40, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

Niigata #SPN50HO, horizontal machining center, 120 automatic tool changer, 29.5" X, 29.5" Y, 29.5" Z, 8000 RPM, Cat 50, Fanuc 16iM, 2004

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Niigata #SPN50HO, CNC horizontal machining center, 2 pallets, 32" X, 30" Y, 32" Z, Cat 50, 15000 RPM, 294 automatic tool changer, 2000

  Photo Spec Sheet Video icon
 Visit Dealer's Equipment Listings  RFQ
Machinesused.com, Minneapolis, MN 763-745-1166 (Email: sales@machinesused.com) John Lawton

Niigata #SPN63, HMC,39.4"X,34.5"Y,31.5"Z,12000 RPM,60 ATC,Cat 50,TSC,Fanuc 16iM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Niigata #SPN63, 60 automatic tool changer, 39.4" X, 34.6" Y, 31.5" Z, 6000 RPM, Cat 50, 4th Axis, Fanuc 16iM, 2002

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Niigata #SPN63, 60 automatic tool changer, 39.4" X, 34.6" Y, 31.5" Z, 12000 RPM, Cat 50, coolant thru spindle, Fanuc 16MB, 1998 (2 available)

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Niigata #SPN63A, 60 automatic tool changer, 39.4" X, 34.6" Y, 32.6" Z, 8000 RPM, Cat 50, Fanuc 16MB, 2004 (2 available)

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

NTC #ZH-4000, 40 ATC, 22"X,22"Y,20"Z, 12k RPM, #40, Fanuc 32iMA, 4-Axis, chip conv., 2007, #80330

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

NTC #ZH-4000, Fanuc 32i, 4th Axis, 22"X, 22"Y, 20"Z, 40 ATC, 12000 RPM

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Orca Machine Tools Inc., Albertville, MN 763-494-9825 (Email: sales@orca-inc.com) Theron Horn

OKK #HM-50S, 24"X,22"Y,22"Z,8 APC,20"x20"pllts,10k RPM,Neomatic M635,'00,#29382

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

OKK #HM-60, 40 ATC, 29.9" X, 28.7" Y, 31.4" Z, 12000 RPM, 4-Axis, Fanuc 16M, 1000 psi thru spindle coolant, Renishaw probe, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Okk #HM-60, CNC horizontal machining center, 40 automatic tool changer, 29.9" X, 28.7" Y, 31.4" Z, CAT50, 12000 RPM, coolant thru spindle, chip conveyor, Fanuc 16M, 1997

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

OKK #HM-80S, 40 automatic tool changer, 31.5" pallet, 39" X, 33" Y, 32" Z, 12000 RPM, #50, 30 HP, Fanuc 16iM, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

OKK #HM-80S, 60 automatic tool changer, 31.5" pallet, 39" X, 33" Y, 32" Z, 12000 RPM, #50, 30 HP, Fanuc 16iM, 1999

  Photo
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

OKK #HM-80S, 60 automatic tool changer, 39.3" X, 33.4" Y, 32.2" Z, 13000 RPM, #50, 30 HP, Fanuc 16iM, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

OKK #HM-80S, Fanuc 16iM,39.37"X,33.46"Y,32.28"Z,.001°,CT50,40 HP,TSC,conv.,2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
FMT Co, Hubbard, TX 817-714-9839 (Email: fmtco.mike@yahoo.com) Mike Frost

OKK #HM-500S, 24"X,22"Y,22"Z,20x20"pllts,12k RPM,60 ATC,Fanuc 180is-MB,'06,#29448

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

OKK #HM-600, 60 automatic tool changer, 30.7" X, 29.5" Y, 31.5" Z, 12000 RPM, #50, 40 HP, Fanuc 31iMB, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

OKK #HM-800S, 5-Axis CNC horizontal machining center, 41.3" X, 35.4" Y, 34.6" Z, 12000 RPM, 60 automatic tool changer, 2009/2011 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

OKK #HM-800S, Fanuc 310iS Model A Control, 4-Axis, (2) 32" pllts, 12000 RPM, CT50, 60 automatic tool changer, coolant thru spindle, chip conveyor, 2009

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

OKK #HM-1000S, CNC HMC,60 ATC,55.12"X,43.31"Y,39.37"Z,12000 RPM,CT50,40 HP,Fanuc 31iB5,2016,#7445

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

OKK #HM-1250S, 60 ATC, 66.93"X,55.12"Y,48.82"Z, 8k RPM, #50, Fanuc 310isA, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

OKK #HMC-500, 29.9" X, 29.9" Y, 31.5" Z, 4-Axis, 15000 RPM, 60 automatic tool changer, thru spindle coolant, Fanuc 31iB, 2017, #29559

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

OKK #HMC-500, 60 automatic tool changer, 29.9" X, 29.9" Y, 31.5" Z, 15000 RPM, #40, thru spindle coolant, Fanuc 31IMB, 2017

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

OKK #HMC-500, 60 automatic tool changer, 29.9" X, 29.9" Y, 31.5" Z, 15000 RPM, #40, thru spindle coolant, Fanuc 31i-MB, 2017

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

OKK #HMS-1000S, 60 automatic tool changer, 55.1" X, 43.3" Y, 39.3" Z, 12000 RPM, Cat 50, thru spindle coolant, Fanuc 310iS, 2008

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Okuma #MA-50HB, hi pressure CTS,hi speed spindle 24000 RPM,full 4th,synch tap,'01

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Okuma #MA-60HB, CNC HMC,60 ATC,39.4"X,31.5"Y,31.5"Z,5000 RPM,35 HP,CAT50,OSP-U100M,2004,#7538

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Okuma #MA-60HB, 4-Axis, 39.4" X, 31.5" Y, 31.5" Z, 5000 RPM, 60 automatic tool changer, Cat 50, OSP U100M, 2004 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Okuma #MA-400HA, 60 automatic tool changer, 22" X, 15.4" Y, 24.6" Z, 15000 RPM, #40, OSP-P200MA, 2006

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Okuma #MA-400HA, 60 ATC, 22"X,24"Y,24"Z, 15k RPM, #40, 30 HP, 4-Axis, OSP-P100, 60 ATC, 8000 RPM, 2005, #12828-2

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Okuma #MA-400HA, 22"X, 24"Y, 24"Z, 154 ATC, 8000 RPM, full 4th, TSC, 2004

  Photo Spec Sheet
 RFQ
Automatics & Machinery Co Inc, Longmont, CO 303-651-6545 (Email: sales@automatics.com) Steve Beck

Okuma #MA-400HA, 4-Axis,157 ATC,22"X,24"Y,24"Z,8000 RPM,CT40,OSP-E100M,2004

  Photo
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Okuma #MA-500HB, HMC,60 ATC,27.5"X,31.5"Y,27.5"Z,10k RPM,CT50,OSP-E100M,2004

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Okuma #MA-500HB, CNC HMC,60 ATC,27.5"X,35.4"Y,30.7"Z,6000 RPM,CT 50,OSP E-100M ctrl,chip conveyor,2005,#7476

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Okuma #MA-500HB, CNC HMC,100 ATC,27.5"X,31.5"Y,27.5"Z,10k RPM,CAT 50,30 HP,OSP-E100M,2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Okuma Space Center #MA-500HII, 27.5" X, 35.4" Y, 30.7" Z, 6000 RPM, Cat 50, 60 automatic tool changer, OSP-P200MA, thru spindle coolant, 2012, S40784

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Okuma #MA-600HB, 60 automatic tool changer, 39.3" X, 35.4" Y, 39.3" Z, 6000 RPM, #50, 4-Axis, OSP-E100, 2004

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Okuma #MA-600HB, horizontal machining center, 39.3" X, 35.4" Y, 39.3" Z, 12000 RPM, 120 automatic tool changer, 1000 psi coolant thru spindle, OSP P200 CNC, Cat 50, 2006

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Okuma #MB-500H, 146 automatic tool changer, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, 40 HP, #40, thru spindle coolant, 2018, #82122

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Okuma #MB-4000H, 64 automatic tool changer, 22" X, 22" Y, 24" Z, 15000 RPM, OSP-P200M, 15.7" pallets, 2015

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Okuma #MB-4000H, CNC horizontal machining center, 110 automatic tool changer, 22" X, 22" Y, 24" Z, 15000 RPM, 40 taper, 40 HP, OSP-P200MA, 2012, #48890

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Okuma #MB-4000H, 110 ATC, 22"X,22"Y,24.6"Z, 40 HP, 15k RPM, #40, 4-Axis, OSP-P300MA, Renishaw probing, TSC, 2011

 
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Okuma #MB-4000H, OSP-P200MA CNC, full 4th, thru spindle coolant, 146 automatic tool changer, 14000 RPM, 2011

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

Okuma #MB-5000H, OSP P200M, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, CT40, 60 automatic tool changer, 2010 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Works Inc, Saukville, WI 262-284-5611 (Email: bob@machwksinc.com) Bob Wescott

Okuma #MB-5000H, HMC,60 ATC,29.92"X,29.92"Y,29.92"Z,15k RPM,CT 40,OSP P200M,CTS,2010,#7513

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Okuma #MB-5000H, 29" X, 29" Y, 29" Z, (2) 19" x19" pallets, HSK-A63, 15000 RPM, 64 automatic tool changer, thru spindle coolant, conveyor, OSP 300M, 2016, #30728

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Okuma #MB5000H, CNC horizontal machining center with Palletace C-750 12 psallet linear system, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, 64 pocket automatic tool changer, 2016, S40673

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Okuma #MB-5000H, 64 automatic tool changer, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, 63 HSK, OSP P300M, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Okuma #MB-5000H, 64 automatic tool changer, 30" X, 30" Y, 30" Z, 15000 RPM, HSK-A63, OSP-P300MA, thru spindle coolant, 2016

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Okuma #MB-5000H, horizontal machining center, 19.7" Pallets, HSK-63A, 15000 RPM, 30 HP, 64 automatic tool changer, Full 4th, thru spindle coolant, Lots of Tool Holders, 2016, Low Hours, TK-21199

  Photo Spec Sheet PDF icon
 Visit Dealer's Equipment Listings  RFQ
Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

Okuma #MB-5000H, CNC horizontal machining center, 110 automatic tool changer, 30" X, 30" Y, 30" Z, 15000 RPM, 40 taper, 40 HP, OSP-P200M, 2011, #48891

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

Okuma #MB-5000H, 146 ATC Matrix,29.9"X,29.9"Y,29.9"Z,15k RPM,#40,OSP P200M,2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Silverlight CNC, Barrington, IL 847-450-1099 (Email: jeff@silverlightcnc.com) Jeff Katzbeck

Okuma #MB-5000H, CNC horizontal machining center, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, CAT 40, OSP-P200M Control, coolant thru spindle, 2010

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Okuma #MB-5000H, CNC horizontal machining center, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, 19.69" x 19.69" rotary pallet, collant thru spindle, 2012

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Okuma #MB-5000H, CNC horizontal machining center, 3-Axis, OSP-P200M, 29.9" X, 29.9" Y, 29.9" Z, 15000 RPM, 19.69" x 19.69"pallet, 2014 (2 available)

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Okuma #MB-8000H, OSP-P300M, 51.1" X, 43.3" Y, 49.2" Z, 171 ATC, 6000 RPM, 31.5" x 31.5" pallet, 6000 RPM, 1° indexing, 40/30 HP, 2013

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Okuma #MC-500H, OSP7000 Combo, (6) 19.68" pllt, 28" X, 25" Y, 25" Z, 1 deg, 8000 RPM, 100 automatic tool changer, pallet pool, probing, 1996

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Okuma #MX-40HA, horizontal machining center, 22" X, 24" Y, 22" Z, 60 automatic tool changer, 12000 RPM, Cat 40, OSP-700M-B, 1998

  Photo Spec Sheet
 RFQ
Industrial Machinery NJ, LLC, Livonia, MI 732-367-4130 (Email: indmachinery.tuli@gmail.com) Tuli Simcha

Okuma #MX-50HB, 60 automatic tool changer, 27.5" X, 31.5" Y, 27.5" Z, #50, 5000 RPM, OSP7000M, thru spindle coolant, 1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Okuma #MX-50HB, horizontal machining center, 27.5" X, 31.5" Y, 27.5" Z, 5000 RPM, Cat 50, OSP-7000M, thru spindle coolant, 1999

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Okuma #MX-60HB, horizontal machining center, 39.4" X, 31.5" Y, 31.9" Z, 7000 RPM, Cat 50, 40 automatic tool changer, OSP U100L CNC, 1998, S40429

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Okuma-Howa #Millac-630H, 80 automatic tool changer, 40" X, 32.3" Y, 32.3" Z, 10000 RPM, #50, Fanuc 16iM, 2000

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Okuma-Howa #Millac-630H, 40"X,32"Y,32"Z,(2) 24.8"pllts,Fanuc 16M,10k RPM,'98,#27132

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Parpas OMV #Electra, 5-Axis High Dynamic CNC traveling column,50 ATC,157.4"X,82.6"Y,55.1"Z,15k RPM,Haidenhain 530i,2016,#7487

  Photo
 Visit Dealer's Equipment Listings  RFQ
Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Saeilo #Mach-3A, horizontal machining center, 20 automatic tool changer, 15.7" X, 13.7" Y, 15.7" Z, 10000 RPM, CAT 40, 10 HP, Fanuc OM, chip conveyor, rigid tapping, 1993

  Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

SNK #HPS-120B, 5-Axis, 124" X, 52" Y, 28" Z, swivel spindle, 20000 RPM, 2 APC, ,120"x48", 60 automatic tool changer, Fanuc 15MA, 2005, #30023

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Starrag Heckert #CWD500D, 4-Axis, Fanuc 16iMB, 29.5" X, 29.5" Y, 29.5" Z, 6000 RPM, 60 automatic tool changer, 2005

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Tajmac #ZPS-H40 Trend CNC HMC, 22"X,20"Y,22"Z,(2) 15.7"x15.7"pallets,ISO 40,10000 RPM,45 ATC,Heidenhain iTNC 530,2011,#18272

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

Tongtai #HB-630, 60 ATC,41.3"X,33.5"Y,38.2"Z,10000 RPM,Cat 50,TSC,Fanuc 31i-MB,2012 (2)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Tongtai #HB-630, 60 ATC, 41.3"X,33.5"Y,38.2"Z, 10k RPM, 40 HP, #40, Fanuc 31i-MB

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Toshiba #BMC-100E, 40"x40"twin pllt, 78"x49", 5k RPM, 50T, 60 ATC, Tosnuc 800, 1995

 
 RFQ
Performance Machine Tools, Fremont, CA 510-249-1000 (Email: sales@permach.com) Robert Kroha

Toshiba #BMC-100E (2) 40"x40"pllt,full 4-Axis HMC,63"X,49"Y,47"Z,.001 deg,5000 RPM

  Photo Spec Sheet PDF icon
 RFQ
EMC Leasing Company, Carlsbad, CA 760-633-4801 (Email: emcleasing@aol.com) Rick Adams

Toshiba #BMC-100E, CNC horizontal machining center, 78" X, 49" Y, 47" Z, 5000 RPM, #50 taper, Tosnuc 800 CNC control, 60 pocket automatic tool changer, chip conveyor, 39.3" x39.3" pallet, S40903

 
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Toyoda #FA-450II, 60 automatic tool changer, 23.6" X, 23.6" Y, 22" Z, 15000 RPM, 4th Axis, coolant thru spindle, Fanuc 15M, BT40, 2002

  Photo
 RFQ Auction item
Equipment Marketers & Appraisers, Cedar Falls, IA 319-266-3578 (Email: craigh@equipmentmarketers.com) Craig Hilpipre

Toyoda #FA-450II, horizontal machining center, Fanuc 16iM, 23.6" X, 23.6" Y, 22" Z, 14000 RPM, 120 automatic tool changer, Cat 40

  Photo
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Toyoda #FA-450II, HMC,Fanuc 15M,23.6"X,23.6"Y,23.6"Z,12k RPM,120 ATC,Cat 40,1998

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Myers Technology Co LLC, Elk Grove Village, IL 847-290-0167 (Email: johnm@myerstc.com) John Myers

Toyoda #FA-450II, CNC horizontal machining center, 23.6" X, 23.6" Y, 23.6" Z, 14000 RPM, 200 automatic tool changer, Cat 40, Fanuc 15MB, 1998, #13263

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Toyoda #FA-450II, Fanuc 15MB,(2)17.72"pllts,23.6"X,23.6"Y,23.6"Z,14k RPM,200 ATC,'98

  Photo PDF icon
 RFQ
520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Toyoda #FA-550II, 60 ATC, 29.53"X,29.53"Y,23.62"Z, 6k RPM, #50, Fanuc 16i, 4-Axis

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Source LLC, Belvidere, IL 815-547-0990 (Email: used@machinerysource.com) Used Sales Dept.

Toyoda #FA-630, 40 automatic tool changer, 39.3" Y, 33.4" X, 29.5" Z, 6000 RPM, Cat 50, Fanuc 16i, 1998, rebuilt '19

  Photo
 RFQ
JTEKT Toyoda Americas Corporation, Wixom, MI 248-459-7676 (Email: nlysaght@toyoda.com) Nick Lysaght

Toyoda #FA-630, (2) 25" pallets, 39" X, 34" Y, 60 automatic tool changer, Fanuc 16i-Ma, new spindle & rebuild 2018, S39079

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Toyoda #FA-800, 31.5x31.5"pallets, 1 degree, 40 ATC, hi pressure, Fanuc 16i, 2004

  Photo
 RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Toyoda #FA-800, 60 ATC,53.1"X,45.2"Y,45.2"Z,6k RPM,#50 tpr,40 HP,Fanuc 16i-MB,2003

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro/Cesar

Toyoda #FA-800, HMC,Fanuc 16iMB,53.1"X,45.2"Y,45.2"Z,6000 RPM,60 ATC,2007,#70715

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

Toyoda #FA-800, 60 ATC, 53.1"X,45.2"Y,45.2"Z, 6k RPM, #50, Fanuc 16i-MB, TSC, 2007

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Toyoda #FA-800, CNC horizontal machining center, Fanuc 16iMB, 53.1" X, 45.2" Y, 45.2" Z, 6000 RPM, 60 pocket automatic tool changer, Cat 50, 31.5" x31.5" pallet, coolant thru spindle, chip conveyor, coolant tank & pump, S40887

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Toyoda #FA-800, HMC with APC,53"X,45"Y,45"Z,6k RPM,Cat 50,120 ATC,Fanuc 16iM,'06

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

Toyoda #FA-800, 120 ATC,53.1"X,45.2"Y,45.2"Z,6k RPM,#50 tpr,TSC,Fanuc 16iM,'06

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Used CNC Inc., Huntley, IL 847-669-9780 (Email: sales@usedcnc.com) Mike Oracko

Toyoda #FA-800S, 4-Axis, 53" X, 45" Y, 45" Z, 2 APC, 41.3" x 41.3", 6000 RPM, 60 automatic tool changer, thru spindle coolant, Fanuc 31iA, 2009, #30551

  Photo Spec Sheet
 RFQ
Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Toyoda #FA-800S, 60 ATC,53.1"X,45.2"Y,45.2"Z,6k RPM,#50,Fanuc 31iMB,2014,#80179

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Toyoda #FA-800S, CNC HMC, 60 ATC,53.1"X,45.2"Y,45.2"Z,6000 RPM,full 4th Axis,2016,#80307

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Toyoda #FA-800S, CNC horizontal machining center, 53.1" X, 45.2" Y, 45.2" Z, Cat 50, 6000 RPM, 120 pocket automatic tool changer, Fanuc 31i-A, coolant thru spindle, (2) 31.5" x 31.5" pallets, 2012, S40571

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Industrial Sales, Elk Grove Village, IL 847-545-6374 (Email: jennifer@perfectionindustrial.com) Jennifer Reiner

Toyoda #FA-1050, horizontal machining center, 120 automatic tool changer, 63" X, 55" Y, 45" Z, 6000 RPM, Cat 50, Fanuc 16i, 2003, rebuilt 2019

  Photo
 RFQ
JTEKT Toyoda Americas Corporation, Wixom, MI 248-459-7676 (Email: nlysaght@toyoda.com) Nick Lysaght

Toyoda #FA-1050, 63" X, 55" Y, 45" Z, 14000 RPM, 120 automatic tool changer, coolant thru spindle, Fanuc 16iM, 41" x41" pallets, 2001

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Toyoda #FH-55, HMC,48 ATC,27.95"X,27.95"Y,22.04"Z,4000 RPM,25 HP,Fanuc,chip conv,1986

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Toyoda #FH-55, horizontal machining center, Fanuc 11MF, 23.5" X, 28.6" Y, 22" Z, 64 automatic tool changer, 5000 RPM, 17.6" x 17.6" pallets, 1987

  Photo
 Visit Dealer's Equipment Listings  RFQ
EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Toyoda #FH-80B, 47"X, 39"Y, 35"Z, 4500 RPM, 120 ATC, 3-Axis, Fanuc 15M, 25/20 HP

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Lee Stevens Machinery Inc., Wixom, MI 248-926-8400 (Email: info@stevensmachinery.com) Randy/Jeff/Chris

Toyoda #FH-100, horizontal machining center, 62.9" X, 47.2" Y, 43.3" Z, 4500 RPM, 60 automatic tool changer, Fanuc 15M, S40012

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Toyoda #FH-100B, horizontal machining center, 62.9" X, 47.2" Y, 43.3" Z, 4500 RPM, 60 automatic tool changer, Fanuc 15M, S40011

  Photo
 Visit Dealer's Equipment Listings  RFQ
Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Toyoda #FH-450S, CNC HMC,60 ATC,23.6"X,23.6"Y,23.6"Z,15k RPM,Fanuc 31Tia,2008

 
 Visit Dealer's Equipment Listings  RFQ
Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Toyoda #FH-450S, horizontal machining center, 3-Axis, 494 automatic tool changer, 12000 RPM, 23.6" X, 23.6" Y, 23.6" Z, thru spindle coolant, 2007

  Photo
 Visit Dealer's Equipment Listings  RFQ
Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Toyoda #FH-500J, 28.74"X,28.74"Y,33.46"Z,Cat 40,15k RPM,60 ATC,CTS,low hrs,2014

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Toyoda #FH-630S, 40 ATC, 39.37"X,31.5"Y,33.46"Z, Fanuc 30i, 2004, #23573

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Gibbs Machinery Co, Warren, MI 586-755-5353 (Email: sales@gibbsmachinery.com) Sales Dept.

Toyoda #FH-630S, horizontal machining center, 39.3" X, 31.5" Y, 33.4" Z, 15000 RPM, CAT 50, Fanuc 30i, 2004 (2 available)

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Toyoda #FH-1250SX, 60 automatic tool changer, 86.6" X, 63" Y, 73" Z, 6000 RPM, #50, Fanuc 310iMA, 1000 psi thru spindle coolant, #21189

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Toyoda #FH-1250SX, CNC horizontal machining center, 4-Axis, 86.8" X, 47.2" Y, 72.8" Z, 8000 RPM, 60 automatic tool changer, 2012, #16363

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Toyota #FH-1250SX, CNC horizontal machining center, Fanuc 310i-A, 6000 RPM, 121 automatic tool changer, 86.6" X, 47.2" Y, 72.8" Z, (2) 49" x 49"pallets, Cat 50, #15303

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Toyoda #FHN-100T, 3-Axis horizontal machining center, 63" X, 47.3" Y, 43.3" Z, 4500 RPM, 120 automatic tool changer, Cat 50, Fanuc 11M, (2) 41.3" x 41.3"pallets, 1986, #14173

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Union #FC-1, CNC traveling column universal machining center, iTNC530, installed new in 2006

  Photo Spec Sheet PDF icon
 RFQ
RAAR Group USA, Redondo Beach, CA 310-487-3800 (Email: Rick.raargroup@gmail.com) Rick Schotts

Witzig & Frank Tri-Flex #U-60 Turmat 29-Ax, 49.5" X, 15" Y, 8.6" Z, 3 GE F, 6 turret, #25704

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

Yasda Precision #YBM-800N-80RP-5PLS, 5-Axis,Fanuc 150MV,10k RPM,CT50,TSC,'99

  Photo Spec Sheet
 Visit Dealer's Equipment Listings  RFQ
ACT Inc, Fullerton, CA 714-441-1992 (Email: rsg@actmachinery.com) Randy Goodman

Back to category listings.


Photo = photo available    Spec Sheet icon = spec sheet available    PDF icon = PDF available    RFQ icon = request quote from seller    Video = video available    web site icon = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:
Advanced Search

Surplus Record Surplus Record All Rights Reserved.
https://surplusrecord.com
Tel: 312-372-9077 Customer Service Mobile Apps Advertise