Browse: Machinery Electrical

Machinery & Equipment >

Lasers >

Lasers, Cnc

CNC MACHINERY & EQUIPMENT:
LASERS, CNC (Also See Plasma Cutters/Punches, CNC)

1,000's of Manuals and Manufacturers filled with Priceless Information

There are 439 listings in this category
Update: Thur, Nov 26, 2020 16:18:08

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

Altmar #LT2400, tube laser cutting system, 2000 watt, 6' x 24', Industrial PC Based controller, Rofin-Sinar PRC Resonator, 2003

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #Apelio-357, punch/laser combo, 1500 watt, 58 station,2 A/I, 50"x 72", 1993

Alternative Machinery Sales, Bellport, NY 631-345-9500 (Email: ddoxsee@altparts.com) Dan Doxsee

Amada #Apelio-2510, punch/laser, 2000 watt, 22 ton, Fanuc 16iL, 2001

Alternative Machinery Sales, Bellport, NY 631-345-9500 (Email: ddoxsee@altparts.com) Dan Doxsee

Amada #Apelio-III-357V AP3357V,CNC Laser Turret Punch Press,30 ton,58 position turret

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Amada #ENSIS-3015AJ, fiber laser, 2000 watt, 2016, installed 2017, #11771

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #ENSIS-3015AJ, fiber laser cutting system,2000 watt,5'x10'sheet size,2016

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #ENSIS-3015AJ, 3000 watt, 5' x 10', Nitrogen Generator, 2017, #11627

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #ENSIS-3015AJ, 3000 watt fiber laser cutting system, 2017, approx 3600 cut hours January 2020, #11682

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #Ensis-3015AJ fiber laser, 3000 watt, 61" X, 121" Y, 3.93" Z, AMNC 3i Control, Nitrogen generator system, Amada Farr dust collector, chiller, 345 cut hours, 2017

Sabito Machinery Inc, Concord, ON 905-738-8730 (Email: david@sabito.com) David Slimowitz

Amada #Ensis-3015AJ, 3000 watt fiber laser cutting system, 5' x 10' cutting capacity, ANBC 3i controller, AJ-4000 oscillator, 2017

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #F0-3015, laser, 4000 watt, 5' x 10', Fanuc 16iL, chiller, turbo blower, vacuum pump, 2002

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #F0-3015NT, laser, 4000 watt, 5' x 10', Amada AMNC/F CNC controller, dust collector, 2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #F0-3015NT, 4000 watt, Amada AMNC/F controller, chiller, dust collector, 2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #FLC4020AJ, fiber laser, 4000 watt, 6' x 12', 2014, #11788

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FLC4020AJ, fiber laser, 4000 watt, 6' x12' sheet, 186" X, 80.7" Y, 3.93" Z, Amada AMNC-F touch screen Control, dust collector, chiller, 2014

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FLCAJ-3015, fiber laser, 2000 watt, 5' x10' sheet, AMNC-F, dust collector, 2013

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FLCAJ-3015, fiber laser, Flying Optic, 2000 watt, 5' x10' tbl, AMNC CNC, LUL, 2013

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Amada #FLCAJ4020, 4000 watt fiber laser w/4020 ASLUL auto tower,installed'15,#11519

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FO3015, Co2 laser, 4000 watt, 5' x10', 120" X, 61" Y, 7.5" Z, S/N 07510636, 2004

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Amada #FO3015, 4000 watt,120"X,60"Y,2-pllts,Fanuc 160iL,chiller dust collector,#29659

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #FO3015, CNC laser, 4000 watt, 121" x 61" sheet, 129" X, 61" Y, 3.94" Z, Fanuc 16iL, Fanuc AF4000E resonator, 2002

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FO3015, CNC laser, 4000 watt, 5' x 10', pallet shuttle, chiller, .750 Mild Steel cap., .375 Stainless Steel/Aluminum cap., 2002

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Amada #FO3015, 4000 watt,5'x10',pallet changer,Fanuc 160iL,chiller,loader,2003,#29948

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #FO3015, laser, 4000 watt, Fanuc 160iL CNC, dual shuttle table, Flying optics, 2002

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #FO3015, laser, 4000 watt, Flying Optics, 5' x 10', Amada AMNC-F CNC, chiller, 2009

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #FO3015, CNC laser, Flkying Optics, 4000 watt, Fanuc 160iL, dual shuttle table, 2004

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #FO3015NT, laser cutting sys,1000 watt,5'x10',dual pllt,Amada AMNC/F Ctrlr,2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #FO3015NT, laser cutting cell w/shuttle table, 4000 watt, 5' x 10', 73624 hours, 2004

T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Amada #FO3015NT, 4000 watt, 5' x 10', 25000 hours, 2008, installed 2009, #11807

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, Torit dust collector, 2004

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, 122" X, 61" Y, 6.87" Z, 2004

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FO3015NT, 4000 watt, 122" X, 61" Y, 7.87" Z, chiller, dust collector, 2008

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, 122" X, 61" Y, 7.87" Z, NT Control, dust collector, chiller, 2009

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FO3015NT, CNC laser cutting system, 4000 watt, 5' x 10', AMNC/F CNC Control, 2008

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #FO3015NT3 laser cutting cell, 4000 watt, 5' x 10', AMNC-F CNC controls, chiller, 2005

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Amada #FO4020, laser, 4000 watt, 6' x 13'sheet size, Fanuc 160iL, 24110 hours, 2005

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Amada #FO4020, laser,4000 watt,174"X,80.7"Y,7.8"Z,Fanuc 160iL,6'x12',chiller,2002

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #FO4020, 4000 watt,80"x160",Fanuc 160iL,dual pllts,dust collector,'02,#30111

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #FO4020, 4000 watt Co2, 6' x 12', 2002

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Amada #FO4020NT, 4000 watt Co2 laser, Flying Optic, 6' x 12' table, Fanuc NT CNC, 2008

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Amada #FOL-3015AJ, fiber laser, 4000 watt, ASFH-3015H load/unld/10 shelf tower, #11765

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FOL3015AJ, 5" x10" tbl., fiber laser, 4000 watt, 120.86" X, 61.01" Y, 3.93" Z, 2014

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #FOL3015AJ, fiber laser, 4000 watt, MP FLEX-IT Automation, new engine, 2016, #11769

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FOM2-3015NT, CNC laser, 4000 watt, 122.8" X, 61" Y, 11.8" Z, Fanuc NT, 2011

MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

Amada #FOM2-3015NT, 4000 watt Co2 laser, 5' x 10' capacity, 2013

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Amada #FOM2-3015RI, rotary index & flat cutting laser system,4000 watt,AMNC PC-OS,'13

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #FOM2-4222, 6000 watt, 7' x 13-1/2' dual pallet, 2012, installed 2016, #11843

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FOM2-RI-3015NT, 4000 watt, 121" X, 61" Y, 7.87" Z, rotary index, AMNC-PC, 2013

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #FOM23015NT, 4000 watt,5' x 10' CO2 Laser cutting sys w/Amada AMNC IT,2013

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #FOMII3015NT, 4000 watt,10-shelf tower,2-load/unld carts,5'x10'cap,'13,#29901

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #FOMII3015NT, 4000 watt, 2013, #11737

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #Gemini-FO3015, 4000 watt, 60" x 120" sheet, shuttle table, X-122", Y-61", Z-7.87, Fanuc 160i-L 4000 control, 2002

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Amada #Gemini-FO-3015, CNC laser system, 4000 watt, new turbo blower, vacuum pump and Internal Optics

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

Amada #Gemini-FO3015NT, 4000 watt,Fanuc,5x10 shuttle,NT AMNC ctrl,24k turbo,2005

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #Gemini-FO3015NT, 4000 watt, Fanuc, 5'x 10'dual pallet, NT control, 2004

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #Gemini-FO4020NT, 4000 watt, Fanuc, 6'x 12'dual pallet, NT control, 2005

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #LC1212A2, CO2 laser, 1500 watt, Fanuc 16L, 1995, #11831

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #LC1212A3XL, 2000 watt, new turbo blower @ 24k hours, 31000 hours, 1999, #11777

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #LC1212II, 1500 watt, Co2 hybrid, 4' x8' tbl., Fanuc 16L, 1995, #81510

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Amada #LC2412BIII, CO2 laser, 3000 watt, 4' x 8', 99" X, 50" Y, 12" Z, 1999

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Amada #LC2415A-IV-NT, 2500 watt, 99" X, 61" Y, 11.8" Z, Amada AMNC-F, dust collector, 2008, #82563

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Amada #LC3015BIII, CO2 laser, 3000 watt, 5' x 10', shuttle table, chiller, dust collector, 1999

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Amada #LC3015F0-NT Series CNC laser sys w/LST shuttle,4000 watt,120"x60"sheet,2006

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Amada #LC3015F0NT, CO2 laser, 5' x 10, AMNC-F controller, dust collector, dual shuttle table, 2006

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #LC3015F1, laser, 4000 watt, Fanuc AF 400 iB, oscillator, AMNC-F, chiller, 2012

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #LC3015F1NT, laser cutting system,4000 watt,5'x10'sheet size,AMNC-F 32 bit,'11

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Amada #LC3015F1NT IB, 4000 watt Co2 laser,500"staineless steel cut,AMNC-F ctrl,2011

FMI Trading LLC, Vinton, TX 928-699-9802 (Email: equipmentbuyers@hotmail.com) Frank Friesen

Amada #LC3015F1NT, 4000 watt Co2, 60" Y, 120" X, linear dr, ASLUL300F1 automatic, 2011, #30254

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #LC3015F1NT, Co2 linear laser, 4000 watt, ASLUL300F1-R1 automation, 2012, #11848

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #LC3015F1NT, 4000 watt, 5' x 10', Amada AMNC-F, dust collector, dual shuttle, 2011

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #LC3015F1NT, 3-Axis, appox 5000 beam on hours, pallet shuttle, Fanuc C4000, 2014

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

Amada #LC4020F1NT, 6000 watt, 6' x 12', NOZ changer, 2010, installed 2012, #11782

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #LCG-3015, laser cutter, 3500 watt, 61.02" width, 121"X, 61"Y, 3.93"Z, AMNC ctrl.

Pioneer Machine Sales, Richmond, TX 479-651-3683 (Email: chancy@pioneermachinesales.com) Chancy Cockrun

Amada #LCG-3015, Co2 laser, 3500 watt, AMNC-F Control, 5' x 10' dual shuttle table, 2015

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #LCG3015AJ, fiber laser, 4000 watt, 2015, installed 2016, #11795

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #LCG3015NT, CO2 laser,3500 watt,5'x10',Amada AMNC-F Ctrlr,dust collector,2017

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Amada #LMP3015, sheet loader, 5' x10',.024"-.236" ga., 2415 Pulsar Application, 2007, #23640

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Amada #Lasmac-LC1212A-II, 1500 watt laser, 50" x50", Fanuc FS 16LB Control, 1998, turbo rebuilt

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Amada #Pulsar-1212 Alpha 2, 2000 watt Co2 laser, 4' x 8', 1998

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Amada #Pulsar-1212, 2000 watt, 50" x100" sheet, 50" X, 50" Y, 11.8" Z, Fanuc 16L, chiller

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #Pulsar-1212-AIII, 2000 watt, 50" x 50", Fanuc, vacuum pump & turbine, 2000

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Amada #Pulsar-1212-II, 1500 watt, 50"x100"sheet, Fanuc 16L, dust collector, 1995

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #Pulsar-1212-III, 2000 watt, 50" x100" sheet, Fanuc 160i, dust collector, 2001

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #Pulsar-1212-III, CNC laser, 2000 watt, 50" X50" Y, 11.8" Z, Fanuc 160i, 1999

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Amada #Pulsar-1212-NT, 2500 watt, approx.17500 hours turbo replaced @ 12k, 2008, #11845

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #Pulsar-2415-A2, 2000 watt, Fanuc 160iL, 99"X, 61"Y, 11.8"Z, 1998, #9258

MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

Amada #Pulsar-2415-A3, laser, 2000 watt, Fanuc 16L, Koolant chiller, dust collector, 2001

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #Pulsar-2415A-IV-NT, CNC laser, 4000 watt, 99" X, 61" Y, 11.8" Z, AMNC-F (NT), 2008

MacLean Machinery Network, Tucker, GA 770-934-6500 (Email: doug@macleanmachinery.com) Doug MacLean

Amada #Pulsar-2415ANT, laser, 2500 watt, Fanuc 160iL 32 bit Control, 43334 hours, 2010

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #Pulsar-2415NTA4, CO2 laser, 2500 watt, LMP 3015 Automation, 2010, #11846

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Amada #Pulsar-2415XL, laser, 2000 watt, Fanujc 16L, Koolant chiller, dust collector, 1996

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #Pulsar-LC1212, CO2 Laser, 2000 watt, Torit Dust Collector, Chiller, Fanuc 106i-L Control, 1996

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Amada #Pulsar-LC2415, CNC Co2 laser cutter, 2000 watt, Fanuc 16-L, 60" x100" sheet, 1996

Blackstone Machinery, Cerritos, CA 562-832-6823 (Email: andrew@blackstonemachinery.com) Andrew Mendez

Amada #Pulsar-LC2415A4NT, 2500 watt, 61" x198" sheet size with 1 repositioning cycle, 2009

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Amada #Pulsar-LC2415LXAIII, 2000 watt CNC laser system w/LMP-3015 load/unload, 2004

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Amada #Quatro, 2000 watt, 49.6" x 49.6" travel, Fanuc AF2000E CO2, 2008, #31019

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bescutter fiber laser cutting machine, 10000 watt, ANCA Control system w/nesting function, water cooled, 3 KW dust exhausting fan, new

Worldwide Machine Tool, Lewis Center, OH 614-496-9414 (Email: bill@worldwidemachinetool.com) Bill Garbe

BLM #LT, fiber laser cutting system, 3000 watt, BLM ADIGE Siemens 840D Control, Automatic Bundle Loader, 2015

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

BLM #LT8, 3500 watt Rofin Sinar DC 035 resonator,28'in/outfeed,bevel head,2009,#29459

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

BLM Adige #LT8, Co2 laser, Siemens 840D CNC Control, Scrap conveyor, 2014

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

BLM Adige #LT8-3D-8.5-6.5, tilt head tube laser, 3500 watt, 2014, #11186

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

BLM #LT712, 2500 watt C02 laser, 8.5 meter load system & a 4.5 (14'7") unload sys

Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell

BLM Adige #LT712D 8.5 tube laser, 6" dia. 335" infeed, 2500 watt Co2, 2004 installed 2005, #31031

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

BLM Adige #LT712D 8.5 tube laser, 6" dia, 335" infeed, 2500 watt, Siemens Sinumerik 840D, Co2, Auto Load system, Auto Tube Holding chuck, 2004

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

BLM Adige #LT803D, Co2 laser, 2500 watts, Siemens 840D CNC Control, 2004

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

BLM #LT803D, CO2 Tube Laser, 2500 watt, 5" x 4" outside dimension / .25 ID range, 2004

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

BLM #LT803D, tube cutting,Siemens CNC Ctrl,Rofin Sinar 2500 Watt CO2 Resonator,2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

BLM #LT813D, tube laser, 240 V., 60 Hz., 2500 watt, 2004

Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell

BLM #LT813D, laser cutting system, 2500 watt, Tube Laser with 3D Tilt Head Cutting and Automatic Bundle Loader, 2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

BLM Adige TubeLaser #LT8-3D-8.5-6.5, tilt head tube laser, 3500 watt, 2014

Pioneer Machine Sales, Richmond, TX 479-651-3683 (Email: chancy@pioneermachinesales.com) Chancy Cockrun

Bystar #3015-Dyed-F6000, 6000 watt, fiber, 62' x122' tbl., spark arrestor, automatic nozzle changer w/ 64 positions, 2016, #82318

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Bystronic #4025, laser cutting system, 4000 watt, 8' x21' sheet, Torit DFT2-12 dust collection, 2004

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Bystronic #ByAutonom-3015, 4400 watt, Bytrans extended load/unload system, 2013

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Bystronic #ByLas-6525, 256" X, 96" Y, 4200 watt, Co2, pallet shuttle, Koolant Koolers Chiller,Bystronic CNC, #30604

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #ByLaser-2015, Co2 laser, 4400 watt, 59" x 118" sheet size, high voltage cabinet, chiller, 2007, #7896

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Bystronic #ByLaser-4400, laser cell w/tower, 4400 watt, Windows NT based CNC, 2005

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Bystronic #BySpeed-3015, 4400 watt 5' x 10' Co2 laser, 2004

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Bystronic #BySprint-3015, 2200 watt,10'X,5'Y,Bytrans load/unload sys,2007,#30068

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #BySprint-3015-Fiber, 6000 watt, 5' x10' table, 120" X, 60" Y, 2.75" Z, TG-6 dust collector, 2015, #82241

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Bystronic #BySprint-4020, 6000 watt fiber laser, 157" X, 78" Y, Byloader, 2014, #30483

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #BySprint-4020 Fiber, 6000 watt, 157" X, 78" Y, pallet shuttle table, ByLoader 4020, Dust Collector, 2015 #30823

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #BySprint-Fiber-4020, 6000 watt laser cutting machine, 157" X, 78" Y, sheet, 2016

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

Bystronic #BySprint-Pro-3015, 4400 watt Co2 laser 60" x120" dual pallet, chiller, dust collector, 2010, #31181

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #ByStar-3015, 4400 watt Co2 laser, 5' x 10', 2007

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Bystronic #ByStar-3015, CNC laser, 4400 watt, 5' x10' sheet size, 54164 run hours, 2007

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Bystronic #ByStar-3015, 4400 watt Co2 laser, 5' x 10', 2006

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Bystronic #ByStar-3015, 6000 watt,60"X,120"Y,Bystronic CNC,pallet changer,2011,#30302

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #ByStar-3015-3, CNC Flying Optic laser, 4000 watt, Torit dust collector, Koolant Kooler chiller, 2001

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Bystronic #ByStar-3015-3, CNC laser cutting system, 5200 watt Co2 laser, 120" X, 60" Y, 2005

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Bystronic #ByStar-4020, 2800 watt CO2 laser system, 6' x 12' cutting capacity, 1996

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Bystronic #ByStar-4020, 2800 watt laser,8' x 13'sheet,sheet loader,updated CPU,1996

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Bystronic #ByStar-4020, 4000 watt laser cutter with load unload system, 2003

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Bystronic #ByStar-4020, 4400 watt, Co2 laser, 160" X, 80" Y, 6.7" Z, dust collector, 2005

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Bystronic #ByStar-4020, 10000 watt fiber laser, 6' x 13', FMS, 2017

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Bystronic #ByStar-4020-3, 4000 watt, 144" X, 72" Y, 6" Z, Bystronic, dust collector, 2003, #82564

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Bystronic #ByStar-4025 - 6.5 Repos CO2 Laser, 4000 watt, 8' x 21' Table, Bytrans Load/Unload System, 2004

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Bystronic #ByStar-4025, 4400 watt,256"x100"sheet size,pallet changer,new ctrl'18,#29954

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Bystronic #ByStar-Fiber-4020, 10000 watt laser cutting machine, 160" X, 80" Y sheet, 2017

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

Bystronic #ByStar-Fiber-4020, 10000 watt, dust collector, automatic nozzle changer, 2016

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

Cincinnati #CL-6, CO2 laser, 1500 watt, 4' x 8' table, Fanuc Series 16L, (2) 48" X 96" Pallet Changers, coolant, 1996

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Cincinnati #CL-6, laser,1500 watt,4' x 8'sheet size,dual pallet,Flying Optic,Fanuc 16L

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Cincinnati #CL-6, 2000 watt, Co2 laser, 4' x8' tbl., 48" X, 96" Y, 8" Z, Fanuc 160iL, 2008

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Cincinnati #CL-6, laser, 2000 watt, 5' x 10' dual shuttle tables, chiller unit, 2005

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-6, CNC laser, 2000 watt, 5' x 10', Fanuc Series 160iL, chiller, 2001

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Cincinnati #CL-6, 3000 watt Fanuc, 6'x 12'dual pallet,Fanuc control,1999

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Cincinnati #CL-6 5X10, 4000 watt laser, (2) 5' x 10'tables, Fanuc Series 160iL CNC, Fanuc C400E resonator, 2001

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Cincinnati #CL-6, laser, 4000 watt, 5' x 10', Fanuc 160il, Fanuc C4000 Resonator, 2003

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Cincinnati #CL-7, laser, 2000 watt, 6' x 12' shuttle table, GE Fanuc OM, contact head, 1995

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-7, CNC laser cutting system, 3500 watt, 6' x 12' table, Co2, #CD5111

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Cincinnati #CL-7, laser, 4000 watt, 5' x10' table, Fanuc C4000 model E resonator

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-7A, laser, 3300 watt, 1.125" MS thickness, 48" x 96" sheet size, dual pallet

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-440, 4000 watt,5' x 10',Linear motors & encoders,pllt changer,'16,#29859

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Cincinnati #CL-440, 4000 watt, Co2, 60"x120"tbl., fume collection plenum, #CD5099

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Cincinnati #CL-440, 4000 watt, CO2 laser cutting system, HMI 15"Color LCD Touch Screen, 5'x10'dual pallets, new, #SMCL440

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Cincinnati #CL-707, 2500 watt, 4'W x 8'L table, 2000, #78344

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Cincinnati #CL-707, 2500 watts, 5'x10'tbl., CNC laser, 1997, #80751

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Cincinnati #CL-707, laser, 3300 watt, non contact cutting head, linear drive motion system

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-707, 3300 watt, 96" X, 48" Y, 8" Z, Rofin DC035 Laser Resonator, 2007

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Cincinnati #CL-707, laser, 3300 watt, 48" x 96" sheet size, 1.125" MS thickness, 2007

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Cincinnati #CL-707, 3300 watt, 48" x 96" shuttle tables, linear motor, 2007

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Cincinnati #CL-707, 3300 watt CNC laser, 4' x 8', dual pallet, 2006

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Cincinnati #CL-707, 3500 watt CNC Laser, 6' x 12' sheet, 145" X, 73" Y, 8" Z, CI loader system

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Cincinnati #CL-707, 3500 Watt CNC Laser, 6' x 12' sheet size, 145" X, 73" Y, 8" Z, S/N 17420000

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Cincinnati #CL-707, Co2 laser, linear magnetic drives, 4000 watt, 2008

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Cincinnati #CL-707, 4000 watt hi-speed linear motor laser,dual pallet,Flying Optic,'08

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Cincinnati #CL-707, Co2 laser, 4000 watt, 5' x 10', Nice Condition, 2008

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Cincinnati #CL-840, Fanuc C4000i 4000 watt Co2 resonator, 78" x157" travel, dual pallets, 2008, #30994

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Cincinnati #CL940 Fiber Laser, 4000 watt IPG generator, 5' x10' dual pallets, Koolant Koolers chiller, Donaldson dust collector, 2012

Kraus Machinery LLC, Grand Rapids, MI 616-485-3022 (Email: krausmachinery@gmail.com) Jeff Kraus

Cincinnati #CL-940, fiber laser cutting, 4000 watt, 5' x10', Dynamic Power Control, 2012

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Cincinnati #CL-940, 4000 watt, fiber laser cutting system, HMI 15"Color LCD Touch Screen, 5'x10'dual pallets, new, #SMCL940

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Cincinnati #CL-940, 4000 watt IPG Fiber, 80" x160" trvl, linear dr, dual pallet, 2014, #30850

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Cincinnati #CL-940, CNC fiber laser cutting system, 4000 watt, 5' x 10', 2012, #10720

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Cincinnati #CL-940-Fiber, 4000 watt, 5' x10' tbl., rapid traverse, Donaldson dust collector, 2012, #82243

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Coherent #Meta-10C, 1000 watt Co2, 50" x50", chiller, blower, touch screen, Honeycomb Table, low hours, 2016, #30966

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

CYLaser #CY2040S, 4000 watt, 6.5' x 12' dual pallet fiber optica laser, 2015, #10772

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Durma #HD-F/L Fibre Series Laser, new

Modern Tool Ltd, Calgary, AB 403-236-1150 (Email: Mark@moderntool.com) Mark Senecal

Ermak #Fibermak-G-Force, 2000 watt, 120" X, 61" Y, 6" Z, fiber laser cutting, Beckhoff CP62, 2018

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-G-Force, 2000 watt, fiber laser cutting, Beckhoff CP62, 2018, new

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-G-Force, 2000 watt, fiber laser cutting machine, Beckhoff CP6242, 2019

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-G-Force, 6000 watt, 120" X, 61" Y, 6" Z, Beckhoff CP6242 touch screen controller, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-G-Force, fiber laser cutting, 8000 watt, 157"x78"sheet, Beckhoff ctrl, dust collector, 2018

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-Raptor, fiber laser cutting machine, 2000 watt, 120" X, 61" Y, 6" Z, dust collector, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Fibermak-SM8000, 8000 watt fiber laser, 78"x157"travels,servo motors,2018,#3940

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Ermak #GEN-3-6x12-6kW, 6000 watt, fiber laser cutting machine, 120" X, 61" Y, 6" Z, 4-Axis, Beckhoff CP6242, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Hawk, fiber laser, 2000 watt, Beckhoff Control, dust collector, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermak #Hawk, fiber laser, 2000 watt, 4-Axis, Beckhoff touch screen controller, dust collector, chiller, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #Ermak-Raptor-4K, 2000 watt, 120" X, 61" Y, 6" Z, Beckhoff CP6242, dust collector, chiller, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #Fibermak-G-Force, 2000 watt, Beckhoff CP6242 touch screen controller, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #Fibermak-G-Force, 4000 watt, Beckhoff CP62 touch screen controller, duct collector, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #Fibermak-GEN-3, 4000 watt 5' x10' fiber laser, Beckhoff CNC Control IPG Resonator, Precitec Auto Focus Cutting Head

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Ermaksan #Fibermak-Raptor, 2000 watt, 120" X, 61" Y, 6" Z, Beckhoff CP6242, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #GEN-3-5x10-2kW, 2000 watt, 120" X, 61" Y, 6" Z, 4-Axis, Beckhoff CP62, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan #GEN-3-5x10-4kW, 4000 watts, 120" X, 61" Y, 6" Z, Beckhoff CP6242, 2020

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Ermaksan, 8000 watt fiber laser,160"X,80"Y,Beckhof CNC,IPG resonator,2017,#30435

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Farley Laser Lab #PR-3015, CNC Laser, 2200 watt, Koolant koolers, ANCA CNC control, 1997

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Flying Optics #FL3015, 4 KW, 5000 watt Co2 laser,5'x10'tbl.,Siemens 840D Sinumerik,'11

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

Flying Optics #FL3015 PRC, 5 KW, 500 watt, CO2, Siemens 840D, 5'x10' dual shuttle,2013

Greenway & Associates Ltd, Orange City, IA 712-737-8700 (Email: shelley@greenwayassoc.com) Clark Groeneweg

Glorystar #GA3015E, fiber laser cutting system, 4000 watt, 5' x 10', Cypcut CNC Control, 2018

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Han-Kwang #Echo-FL-3015, CNC laser w/loader, 2500 watt, Fanuc Control, chiller, 2005

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Han-Kwang #FL3015, 2500 watt Co2 laser, 5' x 10', Siemens control, low hours, 2009

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Han-Kwang #FL3015, 4000 watt,5' x 10'dual shuttle tbl,Siemens 840D Sinumerik ctrl,'11

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Han-Kwang #FL3015, CO2 laser,4000 watt,Siemens 840D Ctrl,5'x10' dual shuttle tbl,2011

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Han-Kwang #FL3015, Co2 laser, 4000 watts, 5 x 10 table, Siemens 840D Sinumerik Control, 2014

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Han-Kwang #FL3015 Flying Optics laser cutting system, 4000 watt Co2 laser,PRC reasonator,Siemens 840D,5'x10'table,2011,#B4016

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Han-Kwang #FL3015, CO2 laser,5000 watt,Siemens 840D Ctrlr,5'x10',dust collector,2013

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Han-Kwang #FL3015 Flying Optics laser cutting system, 5000 watt Co2 laser,PRC reasonator,Siemens 840D,5'x10'table,2012,#B4017

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

Han-Kwang #FL3015, CO2 laser,5000 watt,Siemens 840D SINUMERIK Ctrlr,5'x10' dual shuttle tbl,6700 IPM,dust collector,2012

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Han-Kwang #FL3015, Flying-Optics,5000 watt,5'x10'dual shuttle tbl,Siemens 840D,2012

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Han-Kwang Falcon #FS3015, 4000 watt, 5' x 10', Nlight resonator, Siemens Control, 2018

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Han-Kwang #PL3015, CO2 laser, 4000 watt, 5' x 10' dual tables, 2010, #10798

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Han-Kwang #PL3015, CO2 Laser, 4000 watt, 5' x 10', dual shuttle, S/N PL-117, 2010

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Han-Kwang #PL3015, CNC laser, 4000 watt, 5' x10' sheet size, chiller, dust collector, 2007

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Han-Kwang #PL3015, CNC laser,4000 watt,5'x10',Siemens Sinumerik 840D,auto repo,2010

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

HyRobot #C20 Robotic laser cutting machine, 1500 watt, 59" x 98" work area, 79" full reach width

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Kinetic #K-2500DA, 6 station mill drill/tap head, Hypertherm HPR-250 power supply, Farr/Camfil dust collector, 2011

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Koike #LT-3540 Lasertex Series, gantry type laser,4000 watt,Fanuc 160iL,2002,#10375

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Koike #LT-3540 Lasertex, 4000 watt, 12'W x 60'table, Fanuc 160iL, 2002

UPM, LLC, Ferndale, MI 248-268-1603 (Email: sales@universalpress.com) Sales Dept.

Koike #LT-3540 Lasertex Series, 4000 watt,120"x60"table,Fanuc 160iL,2002,#6785

Presses for Industry, Detroit, MI 313-839-9300 (Email: chip@pfisales.com) C. Thornton

Leica #LTD500 & Smart 310 Laser Tracker package, remote pointe FR controller

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

LVD / Stripit #3015 Plus Orion Laser Cell, 4000 watt, GE control, Fanuc Lasser, 120 x 60 sheet, 2009, #28700

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

LVD #Axel-3015L, 60"x120"trvl, 5 KW,Fanuc,load-unload material handling,'06,#28492

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

LVD #Impuls-4020R, laser, 3000 watt, 10' x 13', 78" X, 157" Y, 11.02" Z, Fanuc 160iL, 1999

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

LVD #Lynx-3015, dual pallet fiber laser cutting system, 4000 watt, 5' x 10' cutting capacity, LVD Touch L Control, Torit dust collector, 2017

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

LVD Strippit #Sirius-3015-Plus, 4000 watt, Co2 laser, 5' x 10'sheet, 2013

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

LVD #Sirius-3015-Plus, CNC laser,5'x10',4000 watt,load/unload/tower,Fanuc 160i-B,'11

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

LVD Strippit #Sirius-3015-Plus, Co2 Laser, 4000 watts, 5' x 10', Fanuc 31i-L Control

T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Markem Imaje #SL-C150, Co2 laser coder, up to 410 FPM, 10 watt, air cooled, RF excited

Frain Industries, Carol Stream, IL 630-629-9900 (Email: sales@fraingroup.com) Katie Frain

Mazak #FabriGear-150, 4000 watts, 6-Axis, Mazak/Fanuc L-64, dust collector, chiller, 2003

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mazak #FabriGear-150V, tube laser,Mazak/Fanuc L-64,6-Axes,26'max.material lgth,2006

Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell

Mazak #FabriGear-220II, Co2 laser, 4000 watt, Mazak/Fanuc CNC Control, parts catcher, 2010

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mazak #Hypergear-510, 4000 watt, Co2, 5'x10', Mazatrol Preview CNC ctrl, 2006

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Mazak #Hypergear-510, Co2 laser, 4000 watts, 5' x 10' table, Mazak Preview Control, 2009

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mazak #Hypergear-510, 4000 watt, 60" x 120", Mazak Preview CNC, pallet shuttle, linear drives, 2006, #30733

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Mazak #Hypergear-612, CO2 laser, 4000 watt, 6' x 12', 2010, #11802

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mazak #Hypergear-Champ-510, CO2 laser, 4000 Watt, 5' x 10', dust collector, chiller, 2009

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #NTX510 Champion, 1500 watt Panasonic, 5'x 10'table, L32B control, 1999

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Mazak #NTX510 Mark II, 2500 watt, 5'x10" bed, 120"X,60.8"Y,3.9"Z, Maz.L32B, 2004

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Mazak #Optiplex-3015, Co2 Flying Optics laser, 2500 watt,.750" thick Mild Steel,.375" Stainless Steel,.125" Aluminum

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

Mazak #Optiplex-3015DDL direct diode laser, 4000 watt, automatic load/unload, 2016/2017

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mazak #Optiplex-3015II, CNC laser, 4000 watt, Mazak Mazatrol Preview III CNC control, 120" x 60" table, 122" X, 62" Y, 4.3" Z, 2014, S41039

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Mazak #Optiplex-3015II, fiber laser, 6000 watt, Preview III, 2016, #11804

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mazak #Optiplex-3015II, fiber laser cutting sys,IPG resonator,Preview III,6000 watt,'17

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Mazak #Optiplex-4020, 4000 watt, 160" X, 80" Y, Mazatrol Preview 3 CNC, pallet changer, High Speed Piercing, 2013, #30869

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Mazak #Optiplex-4020, fiber laser, 6000 watt, 2016, #11636

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mazak #Optiplex-Champion-3015, 3000 watt Fiber laser cutting system, 5' x 10', 2019

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Mazak #Optiplex-Nexus-3015, 2500 watt Co2 resonator, 5' x 10', 2015

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #Optiplex-Nexus-3015, CNC Co2 laser, 3000 watt, 5' x10' sheet, 122" X, 62.2" Y, 5.9" Z, dust collector, chiller, 2015

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Mazak #Optonics-STX-510, 1500 watt laser cutter, 5' x 10', 1992

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Optonics-Space-Gear-48, 2000 watt,5-Axis Co2 laser,tube chuck,4' x 8'table,2000

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Optonics-Super-Turbo-X510-Mark-II, 2500 watt, 2003

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Optonics-Super-Turbo-X510-Mark-II, 4000 watt, Mazatrol L32B, 5' x10' table

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Optonics-Super-Turbo-X510-Mark-II, 5' x10', 4000 watt Co2 laser, Mazatrol L32b

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Optonics-Super-Turbo-X510-Mark-II, 4000 watt, 2003

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #SG48, gear plate / tube laser,2000 watt,4'x8'table,109.3"X,50"Y,14.6"Z,1999

Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell

Mazak #STX48-Champion, 1300 watt Co2 laser, 4' x 8' table, Mazak Preview CNC, 2007

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #STX48-Hi-Pro, 2500 watt,4'x8',CNC,Panasonic 2500 watt resonator,'00,#16207

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #STX510 Mark II, CNC laser cutting sys,4000 watt,5'x 10',Mazatrol L32B CNC,2001

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Mazak #STX510-Mark-II, 2500 watt Co2 CNC laser, 5' x 10' table, Mazak Preview CNC, 2007

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #STX510-Mark-III, 4000 watt Co2 CNC laser, 5' x 10' table, Mazak Preview CNC, 2012

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #STX510-MkII, 2500 watt, 60" x127" travel, Mazatrol L32B CNC, refurbished 2017, 2004, #29780

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Mazak #Space-Gear, 2500 watt laser, 5' x 10', Mazatrol CNC controller, Fanuc L-64, 2006

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Mazak #Space-Gear-48, 200 watt, 5-Axis, Fanuc 160iL, 48" x 96", 2000/2016

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Mazak #Space-Gear-48, 2000 watt Co2 laser cutter, 4' x 8'table, 2000

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Space-Gear-510-MKII, laser, 2500 watt, 60" x120", 5-Axis, Fanuc 160iL, 2006

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Mazak #Space-Gear-510-MKII, 2500 watt 6-Axis laser with load/unload, 2008

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Space-Gear-510-MKII, 4000 watt,5'x 10'table,6-Axis,rotary,Fanuc L64,2005

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Mazak #Space-Gear-U44, 2500 watt, 50"X,50"Y,16.5"Z, Fanuc Series 160i-LB, rblt 2017

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Mazak #Space-Gear-U44, 2500 watt, 6-axis, 49.21"X, 49.21"Y, .75"Z, Fanuc L-64, 2007

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Mazak #Space-Gear-U44, 2500 watt laser,4'x4'table,Fanuc Series 160iLB,35k hours,2007

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #Space-Gear-U44, 2500 watt, 50" x50", Mazak/Fanuc L-64 CNC, rotary axis, 2014, #30393

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Mazak #Super-Turbo-X44, 2500 watt Co2, 4' x 4', 2007

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mazak #Super-Turbo-X44, 4000 watt,49.2"x49.2"cut area,1"thk,Mazatrol Preview ctrl,'08

Johnston Machinery Corp, Des Plaines, IL 847-803-8700 (Email: bjmc2@aol.com) Brian Johnston

Mazak #Super-Turbo-X48, Co2 laser, 1500 watt, Mazak L32 Controller, 48"x96" shuttletable. 1992

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

Mazak #Super-Turbo-X48, CNC laser, 1500 watt, Mazak L-32, Nov. 1992

Rise Tek Inc, Brampton, ON 905-487-3464 (Email: info@risetekmachinery.com) Kulwant Chalotra

Mazak #Super-Turbo-X48-Champion, 1300 watt, 4' x8' sheet, 105" X, 50" Y, 3.9" Z, 2011

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Mazak #Super-Turbo-X48-Hi-Pro Super charged, 2000 watt,104x50x3.9",59800 hrs,'96

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Super-Turbo-X48-Hi-Pro-Supercharged, 2500 watt, Co2 laser,55700 hrs,1998

Beaver Steel Services Inc, Carnegie, PA 412-429-8860 (Email: joed@beaversteel.com) Joe Denninger

Mazak #Super-Turbo-X48-MKll, 2500 watt Co2 laser cutter, 2006

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Mazak #Super-Turbo-X510-Mark-II, 2500 watt, 5' x10' sheet, 127" X, 60" Y, 3.94" Z, 2007

Hindley Machine Tool Sales LLC, Byron Center, MI 616-916-5990 (Email: don@hindleymts.com) Don Hindley

Mazak #Turbo-X48 Champion, CO2 laser, 1000 watt, 5' x 10', 1996, Refurbished 2014

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mazak #Turbo-X48, 1500 watt, laser, magnetic head, 1999

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mazak #Turbo-X48, laser, 1500 watt, Mazatrol L-32B control, 4' x 8' table, 1998

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Mazak #YB-1500LB5M2, 1500 watt, Co2 laser, 96" X, 48" Y, 4" Z, L32 Control, 1991

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitsubishi #2512HD, laser, 3600 watt, LC20B CNC Control, chiller, 2000, rebuilt 12/2016

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Mitsubishi #2512LXP, laser, 2000 watt, Flying Optic, LC10BV CNC Control, chiller, 1999

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Mitsubishi #2512LZP, CNC laser cutting system, 3000 watt, LC-20BP CNC Control, 1999

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Mitsubishi #3015HD, laser, 2000 watt, Flying Optic, 96" X, 48" Y, 3.9" Z, LC10BV CNC Control

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Mitsubishi #3015LVP-Plus, CO2 laser, 4000 watt, 2006, #11801

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #3015NX-60CF-R, CO2 laser, 6000 watt, 5' x 10' dual pallet, 2010, #11748

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #3015NX-F40S, 4000 watt fiber, 5' x10' pallet shuttle, load/unload system, 2015

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Mitsubishi #LM3015LVP, CNC laser cutter, 3500 watt, 5' x10' table, Mitsubishi LC20 Control, 2002

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Mitsubishi #ML2512HV, laser, 2000 watt, 4' x 8'table, new October 2008

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Mitsubishi #ML2512LXP, CO2 laser, 3000 watt, 4' x 8' sheet, 98" X, 49" Y, 3.9" Z, 1998

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Mitsubishi #ML2512LXP, CO2 Laser, 3000 watt, 4' x 8', 3020D Flying Optic, Accuchiller LX2, 1998

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mitsubishi #ML3015-EX-Plus-45CF-R, 4500 watt, 3-Axis, 122" X, 61" Y, 5.9" Z, 64-Bit CPU, 2012

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mitsubishi #ML3015-LVPLU-ll, 4500 watt, 122.05" X, 61.02" Y, 3.54" Z, 2010, #82422

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mitsubishi #ML3015EX, 4500 watt, ML45CF-R CO2, 2015, #11753

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #ML3015EX, CO2 laser, 4500 watt, 2010, #11800

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #ML3015EX-F80, fiber laser, 8000 watt, 2018, #11799

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #ML3015LVP Plus, 3500 Watt, 60" x 120", LC20B CNC, dual pallets, 2006, #31143

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Mitsubishi #ML3015LVP(S), Co2, 4000 watt, 5' x10', 122" X, 61" Y, 3.54" Z, 3-Axis, 2006, #11718

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #ML3015LVP(S), 4000 watt, 5' x 10', 122" X, 61" Y, 2.94" Z, Flying Optic, 2005

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Mitsubishi #ML3015LXP 5036 CO2 CNC Laser, 3600 Watt, 5x10' pallet, ML5036D resonator, 2 pallets, 120"X, 60"Y, 3.94"Z, 2000

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Mitsubishi #ML3015LZP, CO2 laser, 5000 watt, Mitsubishi LZ20BD CNC Control, 2000

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mitsubishi #ML3015NX-60XF, 6000 watt laser, Diamond-Path Technology, 2010

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mitsubishi #ML3015NX-F40, 4000 watt, Fiber optic laser, 5' x10' tbl., dual pallet, 2015, #82155

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Mitsubishi #ML3015NX-F40, fiber laser, 4000 watt, FSC03015FX load/unload, 2015, #11714

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #ML3015SR-F20, fiber laser, 2000 watt, 5' x10' sheet, 122.1" X, 61.02" Y, 5.9" Z, YLS 2000 ML, 2019

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Mitsubishi #ML3015eX35CF-R, laser cutter,pallet changer,3500 watt,35CF-resonator,'13

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Mitsubishi #ML3020HT, 5-Axis, 3000 watt Co2 laser, 88 KVA, serial #1030PT165, 2000

RAAR Group USA, Redondo Beach, CA 310-487-3800 (Email: Rick.raargroup@gmail.com) Rick Schotts

Mitsubishi #ML3122VZ(VZ1), 5-Axis CO2 Laser, 2000 watt, 7' x 10' work area, Accu Chiller, Pendant Control, 2001

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Mitsubishi #ML3122VZ, 5-Axis CO2 Laser, 2000 watt, 5' x 10', 122" X, 86.61" Y, 33.46" Z, Mitsubishi LC20T Control, 2000

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Mitsubishi #MLLXP2512, CNC laser cutting system, 2000 watt, 4' x 8' cutting capacity, Mitsubishi 32 Bit LC10BV controller, 1997

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Mitsubishi #VZ1, 5-Axis CNC laser,3000 peak/2000 constant watts,80x60",23"Z,chiller

Westbrook Engineering Co, Warren, MI 866-367-7297 (Email: joe@westbrook-eng.com) Sales Dept.

Miyachi Unitek #LW51, compact Yag laser,50 watt,200/220 VAC tap selectable,2004-05 (4)

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Miyachi Unitek #LW53, compact Yag laser, 100 watt, .03-20MS/CW pulse duration

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Miyachi Unitek #LW100, compact Yag laser system, chiller, cabinet

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Nukon #ECOS-Line PRO3151K, 1000 watt, CNC fiber laser cutting, hydraulic blocks, sheet holder, new, #SMECOSLINEPRO3151K

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Nukon #ECOS-Line PRO3152K, 2000 watt, CNC control unit, hyd.blocks, sheet holder, new, #SMECOSLINEPRO3152K

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Nukon #NFPRO3153K, 3000 watt, CNC fiber laser cutting, hyd.blocks, dust filtration system, 32 HP, new, #SMNFPRO3153K

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Nukon #NFPROVENTO315, 4000 watt, CNC fiber laser cutting, hyd.blocks, 42 HP, new, #SMNFPROVENTO315

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Nukon #NFPROVENTO420, 6000 watt, CNC fiber laser cutting, suction system, 80 HP, new, #SMNFPROVENTO420

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Piranha #L510, fiber laser cutting system,5'x10',(2) pallets,Windows CNC Ctrl,new

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Piranha #M510, laser cutting system, 5' x10', Power Automation PA8000 CNC Control, new

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Prima #Domino-CO2, 5-Axis laser,3000 watt,120"X,60"Y,5.9"Z,welding head,Primach 9000L Ctrl,2004

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Prima #Platino-1530, 4000 watt fiber laser,5'x10',pallet shuttle,P30L CNC,2017,#30083

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Prima #Platino-1530, 4000 watt C02 laser, dual 60" x120" pallets, Primach 20L, 2009, #30997

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Prima #Platino-1530, 5000 watt, dual 5' x 10' table, P30L Control, 2012

Chrisgo Equipment Co., Inc., Milford, OH 513-575-1152 (Email: chrisgoeq@aol.com) Chris Wilson

Prima #Platino-1530, laser cutter,5000 watt,120"X,60"Y,6"Z,5' x 10'table,low hrs,'12

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Prima #Platino-1530HS, 3500 watt, 5' x10' table, 2 pallets, Primach-20L, 2004, #12243

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Prima #Platino-2040HS, 5000 watt, 160" X, 80" Y, 6" Z, dual pallets, Primac 20L Control, 2007

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Prima #Platino-3015 FMS, 5000 watt Co2 CNC laser, Flying Optic, 5' x10', 2009

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Prima #Rapido, 5-Axis CNC simultaneous laser, 2500 watt, Primach 9000L CNC, 126"X,60"Y,24"Z, Torit dust collector, 2006

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

Prima #Rapido-5, 3D laser cutting system, 5' x 10', PRIMACH-900L/30 Control, new heat exchanger, Donaldson Torrit dust collector, thermal care chiller, 2006, #3676

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Prima Power #Syncrono-3015, laser cutter,Prima CP4000 resonator 4000 watt,5'x10'tbl,'07

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Prima #Syncrono-1530HS, 4000 watt, Laser Cutting Sys, shuttle table, 120" X, 60" Y, 5.1" Z, dust collector, quick pierce, 0.00004 inches linear axis resolution, 2008

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Rofin #DC-015, high power Co2 slab laser power supply, 1500 watt, #11199

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Rofin #DC-404, 4160 watt, resonator, 480 V., 2007, #10628

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Salvagnini #L1.IT, Laser, 3000 watt, 5' x10' table, 120" X, 60" Y, 5.9" Z, Rofin DC 030 Laser Source, new head, chiller, 2007

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Salvagnini #L3, fiber laser cutting system, 3000 watt, 2011

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Salvagnini #L3, fiber laser, 3000 watt, 5' x 10', approx. 5800 cutting hours, 2011, #11844

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Senfeng #SF-1313G, fiber laser, 1500 watt, 4' x 4' table, IPG Laser Source, chiller, 2019

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Strippit #Helios-510, CNC laser, 2000 watt, 60"x120"sheet, dust collector, 1997

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Strippit/LVD #Impuls-125-31, 4000 watt,493" x 122" sheet size,Fanuc CNC,2007,#29661

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: paul@prestigeequipment.com) Paul Lashin

Tanaka #KT650J CO2 laser, Oxy Fuel flame cutter, 13' x 20', 2006

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Tanaka #LMX-II25, w/Tanaka Chiller UWA-15DYRZ, Fanuc 16-L Control, S/N 09-1555, #84218

Smith Machinery Co, Ames, IA 515-233-6330 (Email: smc@smithmachinery.com) Jim Smith

Tanaka #LMX-VII-TF6000, CO2 Laser, 6000 watt, Fanuc 16i-LB, 2008

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Tanaka #LMX-VII-Z30-TF6000, 161" x 84' travel, Fanuc 6KW CO2 laser, 2008, #30633

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Tanaka #LMX2-TF2500, 2500 watt, 519"X,102"Y, Fanuc 16LA CNC, 1993, #25512

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Tanaka #LMXV-30, 4000 watt plate laser,10' x 42'table,Fanuc 16iLB,guide beam,2012

Forge Manufacturing Solutions, Ankeny, IA 515-249-8428 (Email: info@forge-usa.com) Paul Farrell

Tanaka #LMXV-Z30, 6000 watt CNC Gantry Laser Cutting System, 120" x 260" cutting capacity, Fanuc 16i-LM CNC Control, Fanuc TF6000 E 6000 Watt Power Supply, 2004

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Trumpf #1030, CNC, 2000 watt, 5' x10', TruCoax 2000, chiller, dust collector, 2009, #31068

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #1030, 2500 watt Flying Optic laser cutting system,5'x10',Siemens CNC,2012

T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Trumpf #1030, fiber laser, 3000 watt, 10288 laser on hours, 2014, #11781

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #2030, laser, 3200 watt, 5' x 10' table, Siemens CNC, Trucoax 3200 resonator, 2012

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #5030-L20, 5000 watt, 120" x 60" table, 0.75" steel cutting capacity

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Trumpf #HL1003D, laser power supply, #11198

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Trumpf #HL4006D, Laser welding CW solid state, 4000 watt, w/chiller, 2002

TNT Industrial, Orange, CA 714-612-1480 (Email: Jim@tntind.com) Jim Thinnsen

Trumpf #L2510, 2000 watt, 4'x10'tbl., 49"X,120"Y,5"Z, Siemens Sinumerik 840D, 2005, #80649

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Trumpf #L2510, automated laser cutting sys,2000 watt,4'x10',Co2,Siemens 840D ctrl,'05

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Trumpf #L2510, CNC laser, 2000 watt, 4' x 10' table, Siemens CNC, automatic load/unload, 2006

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Trumpf #L2510, CNC laser cutting system,160"X,80"Y,4.5"Z,5000 watt,Siemens 840D,'04

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Trumpf #L2510, laser, 5000 watt, 80" x 160" bed, Siemens 840D CNC, KKW chiller, 2004

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #L2530, Co2 laser, 3200 watt, Siemens 840D controller, dust collector, 2003

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Trumpf #L2530-Plus, 3200 watt,4'x 8'shuttle table,Siemens ctrl,only 6K beam,2004

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #L2530-Plus, laser, 3200 watt, 4' x 8', 98.42" X, 49.21" Y, 4.52" Z, Resonator recently replaced, 2003

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Trumpf #L3030, 3000 watt, 5'x10'tbl., 120"X,60"Y,4.5"Z, Siemens 840D, 1997, #80730

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Trumpf #L3030, 3200 watt, 5' x 10'shuttle table, Siemens control, 2001

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #L3030, 4000 watt Co2 laser, Flying Optic, 5' x 10' table, Siemens 840D CNC, 2000

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Trumpf #L3030, 4000 watt, 5' x10', Siemens 840D CNC, pallet changer, new resonator chiller, dust collector, 2011, #30806

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #L3030, CNC laser, 4000 watt, 60" x 120", Siemens control, automatic shuttle table, dust collector,7.5"head,transformer, 2004

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Trumpf #L3030, 6000 watt fiber laser, 5' x 10', automatic nozzle changer, low hours, 2018, #30681

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #L3050, 5000 watt, 5' x10' sheets, 122.2" X, 62.2" Y, 4.5" Z, Siemens, Liftmaster load/unload, 2004

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Trumpf #L3050, 5000 watt, 5'x 10'dual pallet, Siemens 840D control, 2004

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #L3050, 6000 watt, 5' x 10', pallet shuttle, dust collector, 2005, #30824

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #L3530, laser, 4000 watt, Siemens 840D PC based, non-contact cutting heads, 2005

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #L4030, laser, 4000 watt, 6' x 12' table, Siemens 840D CNC, LiftMaster loader, 2004

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #L4030, laser cutting system, 4000 watt, 160" x 80', Siemens 840D CNC Control, 2000

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Trumpf #LaserCAT, Co2 laser, 2600 watt, 5' x 10' table area, 120" X, 60" Y, 4" Z, 1995

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #TL2503 Laser Cat Co2 laser, 2600 watt, Flying Optics, 4' x 8' sheet, 1994

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #TL3030, 4000 watt,5x10 shutle,Siemens ctrl,Liftmaster,less than 10k hrs,2007

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #TLC2530 Plus Flying Optics dual pallet laser system, 4000 watt, Siemens CNC, 2007

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #Tru-Flow-8000, Co2 laser power unit, 8000 watt, #10629

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Trumpf #TruLaser-1030, 2000 watt laser, Trumpf CNC, sheet lifter, 2009

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #TruLaser-1030, 2500 watt flying optic laser, 5' x 10', Trumpf PC Based Control, 2013-2014 (2)

T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Trumpf #TruLaser-2025, laser, 3200 watt, Flying Optics, Siemens 840D, 4' x 10' table, 2008

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #TruLaser-2030, 3200 watt, 121" X, 60" Y, Siemens SIMO CNC, automatic sheet load/unload, 2007, #30964

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #TruLaser-2030, 3200 watt laser, 5' x 10', 2012

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Trumpf #TruLaser-2030, CO2 laser, 3200 watt, 5' x 10', automatic load/unload, 2010, #11840

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-2030, 3200 watt, load unload system,2012,new resonator in 2018

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Trumpf #TruLaser-2030-Fiber, 4000 watts, 5' x10' tbl., Siemens Sinumerik 840D, 2016, #82440

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Trumpf #TruLaser-2525, 3200 watt, 96" X, 48" Y, Siemens 840D CNC, (2) pallets, chiller, dust collector, 2008, #30746

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #TruLaser-3030, CNC Co2 laser cutting system, 4000 watt, 5' x10' sheet, 120" X, 60" Y, 5" Z, 2009

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Trumpf #TruLaser-3030, 4000 watt 5'x10'fiber laser,Lift Master,w/Brightline Tech.,2014

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Trumpf #TruLaser-3030, Fiber Laser, 4000 watt, 5' x 10' with dual shuttle tables, Siemens Sinumerik 840D SL CNC Control, 2014

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Trumpf #TruLaser-3030, CNC laser cutter, 5000 watt, 5' x10', Siemens 840D, chiller, 2009

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Trumpf #TruLaser-3030, 5000 watts, 120" X, 60" Y, 4.5" Z, Siemens 840D, dust collector, 2012

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #TruLaser-3030, 5000 watt, 5' x 10'shuttle table, Siemens control, 2014

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #TruLaser-3030, 5000 watt, 5' x10', Siemens 840D Control, Truflow 5000 watt laser resonator, APC, Linear Drive, High Speed Cutting Head, Chiller, 2012

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Trumpf #TruLaser-3040, 5000 watt, 6' x 13'shuttle table, Siemens control, 2012

Elite Machinery Inc, Caledonia, WI 262-878-9400 (Email: sales@elitemch.com) Neal Kruszka

Trumpf #TruLaser-3040, laser, 5000 watt, (2) 80" x160" pallets, Siemens 840D SL, 2012

Fabricating Machinery Corp, Monarch Beach, CA 949-481-6903 (Email: roger@fabmach.com) Roger Skillman

Trumpf #TruLaser-3060, 6000 watt, 8' x20' sheet, TruDisk 6001, 2018, #11715

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-4030, 2D laser cutting machine, 4000 watt, 6' x 12' table, 2000

EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Trumpf #TruLaser-4050, 5000 watt, 6' x 12' table, 2006

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Trumpf #TruLaser-4050, Fiber 2D laser cutting machine, 5000 watt, 6' x12' table, 2006

EZ Systems, Costa Mesa, CA 714-815-4968 (Email: davidk@ezsystems.com) David Kranser

Trumpf #TruLaser-5030, 5000 watt fiber laser, Flying Optic, 5' x10' tbl, Siemens CNC, 2014

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Trumpf #TruLaser-5030, 5'x10' Co2 laser, 5000 watt, omes with Lift Master, 2008

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Trumpf #TruLaser-5030, 5000 watt, 5' x10', Siemens 840D Control, Truflow 5000 watt laser resonator, APC, Linear Drive, High Speed Cutting Head, Chiller, 2008

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Trumpf #TruLaser-5030, 5' x10' tbl, 120" X, 60" Y, 4.5" Z, Siemens 840D, dust collector, 2008

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #TruLaser-5030-Classic, CO2 laser, 5000 watt, 2006, #11841

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-5030-Classic, Co2 laser, 6000 watt, 27000 beam on hours, 2012, #11733

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-5040, 6000 watt,linear laser cutter w/Siemens CNC ctrl,30271 hrs,2011

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-5060, 5000 watt,80"x240",pallet/nozzle changer,Load Master,'14,#30172

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #TruLaser-7000, 3600 watt tube laser cut.sys,w/opt 30'raw piece lgth,'11,#11278

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Trumpf #TruLaser-Cell-7040, CNC laser, 5000 watt, 2008, #11154

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Trumpf #TruLaser-Station-5005, 5-Axis, 1000 watt, 11.81" X, 11.81" Y, 19.68" Z, 2017

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #TruLaser-Tube-7000, CNC tube laser, 3600 watt, 256" X, 12.6" Y, 9" Z, Siemens Sinumerik 840D si CNC, Trumpf TruFlow 3600 resonator, 2011, S38392

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Trumpf #TruMatic-TLC3030, CNC Co2 laser, 3000 watt, Siemens Control, 5' x10' sheet, 1999, #104188

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Trumpf #Trulaser-Tube-7000, 3600 watts, dust collector, chiller, Siemens 840D Control, 2010

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #Trumatic-L2530, 3000 watt, two 4'x8'tbls., 98.43"X,49.21"Y,4.53"Z, 2000

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Trumpf #Trumatic-L3030, 3000 watt CO2 laser, 120" X, 60" Y, 4.5" Z, dust extractor, 2000

G-2000 Inc, Toledo, OH 419-536-4445 (Email: eyoder@g2000inc.com) Evan Yoder

Trumpf #Trumatic-L3030, 3200 watt, 5'x10'tbl., 122.2"X,62.2"Y,4.5"Z, Seimens ctrl, lift master, 2005

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Trumpf #Trumatic-L3030, 4000 watt, 5'x10'sheet, Seimens ctrl, lift master, 2006

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Trumpf #Trumatic-L3030, 5'x10' Co2 laser with Lift Master, 4000 watt, 2005

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Trumpf #Trumatic-L3030, 5'x10' Co2 laser with Lift Master, 4000 watt, 2006

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Trumpf #Trumatic-L3030, 4000 watt, 5' x10' tbl., 120" X, 60" Y, 4.5" Z, Siemens, 2005

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #Trumatic-L3030, 6000 watt, 5' x10', 63" X, 123" Y, 4.5" Z, Siemens 841D, 2006

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Trumpf #Trumatic-L3030-TLF-3000T, 3000 watt, 5' x 10', Siemens 840D Control, 2000

Southern Fabricating Mchy Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Trumpf #Trumatic-L3040, 4000 watt, 5' x10', pallet changer, Liftmaster, Siemens 840D, New Resonator 2017, #30914

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Trumpf #Trumatic-L3050, CNC laser cutting system, 5000 watt, 5' x10' sheet, 60" X, 120" Y, 5" Z, dual shuttle system, liftmaster, 2006

Hindley Machine Tool Sales LLC, Byron Center, MI 616-916-5990 (Email: don@hindleymts.com) Don Hindley

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

CNC MACHINERY & EQUIPMENT:LASERS, CNC (Also See Plasma Cutters/Punches, CNC)

Altmar #LT2400, tube laser cutting system, 2000 watt, 6' x 24', Industrial PC Based controller, Rofin-Sinar PRC Resonator, 2003

Amada #Apelio-357, punch/laser combo, 1500 watt, 58 station,2 A/I, 50"x 72", 1993

Amada #Apelio-2510, punch/laser, 2000 watt, 22 ton, Fanuc 16iL, 2001

Amada #Apelio-III-357V AP3357V,CNC Laser Turret Punch Press,30 ton,58 position turret

Amada #ENSIS-3015AJ, fiber laser, 2000 watt, 2016, installed 2017, #11771

Amada #ENSIS-3015AJ, fiber laser cutting system,2000 watt,5'x10'sheet size,2016

Amada #ENSIS-3015AJ, 3000 watt, 5' x 10', Nitrogen Generator, 2017, #11627

Amada #ENSIS-3015AJ, 3000 watt fiber laser cutting system, 2017, approx 3600 cut hours January 2020, #11682

Amada #Ensis-3015AJ fiber laser, 3000 watt, 61" X, 121" Y, 3.93" Z, AMNC 3i Control, Nitrogen generator system, Amada Farr dust collector, chiller, 345 cut hours, 2017

Amada #Ensis-3015AJ, 3000 watt fiber laser cutting system, 5' x 10' cutting capacity, ANBC 3i controller, AJ-4000 oscillator, 2017

Amada #F0-3015, laser, 4000 watt, 5' x 10', Fanuc 16iL, chiller, turbo blower, vacuum pump, 2002

Amada #F0-3015NT, laser, 4000 watt, 5' x 10', Amada AMNC/F CNC controller, dust collector, 2004

Amada #F0-3015NT, 4000 watt, Amada AMNC/F controller, chiller, dust collector, 2004

Amada #FLC4020AJ, fiber laser, 4000 watt, 6' x 12', 2014, #11788

Amada #FLC4020AJ, fiber laser, 4000 watt, 6' x12' sheet, 186" X, 80.7" Y, 3.93" Z, Amada AMNC-F touch screen Control, dust collector, chiller, 2014

Amada #FLCAJ-3015, fiber laser, 2000 watt, 5' x10' sheet, AMNC-F, dust collector, 2013

Amada #FLCAJ-3015, fiber laser, Flying Optic, 2000 watt, 5' x10' tbl, AMNC CNC, LUL, 2013

Amada #FLCAJ4020, 4000 watt fiber laser w/4020 ASLUL auto tower,installed'15,#11519

Amada #FO3015, Co2 laser, 4000 watt, 5' x10', 120" X, 61" Y, 7.5" Z, S/N 07510636, 2004

Amada #FO3015, 4000 watt,120"X,60"Y,2-pllts,Fanuc 160iL,chiller dust collector,#29659

Amada #FO3015, CNC laser, 4000 watt, 121" x 61" sheet, 129" X, 61" Y, 3.94" Z, Fanuc 16iL, Fanuc AF4000E resonator, 2002

Amada #FO3015, CNC laser, 4000 watt, 5' x 10', pallet shuttle, chiller, .750 Mild Steel cap., .375 Stainless Steel/Aluminum cap., 2002

Amada #FO3015, 4000 watt,5'x10',pallet changer,Fanuc 160iL,chiller,loader,2003,#29948

Amada #FO3015, laser, 4000 watt, Fanuc 160iL CNC, dual shuttle table, Flying optics, 2002

Amada #FO3015, laser, 4000 watt, Flying Optics, 5' x 10', Amada AMNC-F CNC, chiller, 2009

Amada #FO3015, CNC laser, Flkying Optics, 4000 watt, Fanuc 160iL, dual shuttle table, 2004

Amada #FO3015NT, laser cutting sys,1000 watt,5'x10',dual pllt,Amada AMNC/F Ctrlr,2004

Amada #FO3015NT, laser cutting cell w/shuttle table, 4000 watt, 5' x 10', 73624 hours, 2004

Amada #FO3015NT, 4000 watt, 5' x 10', 25000 hours, 2008, installed 2009, #11807

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, Torit dust collector, 2004

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, 122" X, 61" Y, 6.87" Z, 2004

Amada #FO3015NT, 4000 watt, 122" X, 61" Y, 7.87" Z, chiller, dust collector, 2008

Amada #FO3015NT, CNC laser, 4000 watt, 5' x10' sheet, 122" X, 61" Y, 7.87" Z, NT Control, dust collector, chiller, 2009

Amada #FO3015NT, CNC laser cutting system, 4000 watt, 5' x 10', AMNC/F CNC Control, 2008

Amada #FO3015NT3 laser cutting cell, 4000 watt, 5' x 10', AMNC-F CNC controls, chiller, 2005

Amada #FO4020, laser, 4000 watt, 6' x 13'sheet size, Fanuc 160iL, 24110 hours, 2005

Amada #FO4020, laser,4000 watt,174"X,80.7"Y,7.8"Z,Fanuc 160iL,6'x12',chiller,2002

Amada #FO4020, 4000 watt,80"x160",Fanuc 160iL,dual pllts,dust collector,'02,#30111

Amada #FO4020, 4000 watt Co2, 6' x 12', 2002

Amada #FO4020NT, 4000 watt Co2 laser, Flying Optic, 6' x 12' table, Fanuc NT CNC, 2008

Amada #FOL-3015AJ, fiber laser, 4000 watt, ASFH-3015H load/unld/10 shelf tower, #11765

Amada #FOL3015AJ, 5" x10" tbl., fiber laser, 4000 watt, 120.86" X, 61.01" Y, 3.93" Z, 2014

Amada #FOL3015AJ, fiber laser, 4000 watt, MP FLEX-IT Automation, new engine, 2016, #11769

Amada #FOM2-3015NT, CNC laser, 4000 watt, 122.8" X, 61" Y, 11.8" Z, Fanuc NT, 2011

Amada #FOM2-3015NT, 4000 watt Co2 laser, 5' x 10' capacity, 2013

Amada #FOM2-3015RI, rotary index & flat cutting laser system,4000 watt,AMNC PC-OS,'13

Amada #FOM2-4222, 6000 watt, 7' x 13-1/2' dual pallet, 2012, installed 2016, #11843

Amada #FOM2-RI-3015NT, 4000 watt, 121" X, 61" Y, 7.87" Z, rotary index, AMNC-PC, 2013

Amada #FOM23015NT, 4000 watt,5' x 10' CO2 Laser cutting sys w/Amada AMNC IT,2013

Amada #FOMII3015NT, 4000 watt,10-shelf tower,2-load/unld carts,5'x10'cap,'13,#29901

Amada #FOMII3015NT, 4000 watt, 2013, #11737

Amada #Gemini-FO3015, 4000 watt, 60" x 120" sheet, shuttle table, X-122", Y-61", Z-7.87, Fanuc 160i-L 4000 control, 2002

Amada #Gemini-FO-3015, CNC laser system, 4000 watt, new turbo blower, vacuum pump and Internal Optics

Amada #Gemini-FO3015NT, 4000 watt,Fanuc,5x10 shuttle,NT AMNC ctrl,24k turbo,2005

Amada #Gemini-FO3015NT, 4000 watt, Fanuc, 5'x 10'dual pallet, NT control, 2004

Amada #Gemini-FO4020NT, 4000 watt, Fanuc, 6'x 12'dual pallet, NT control, 2005

Amada #LC1212A2, CO2 laser, 1500 watt, Fanuc 16L, 1995, #11831

Amada #LC1212A3XL, 2000 watt, new turbo blower @ 24k hours, 31000 hours, 1999, #11777

Amada #LC1212II, 1500 watt, Co2 hybrid, 4' x8' tbl., Fanuc 16L, 1995, #81510

Amada #LC2412BIII, CO2 laser, 3000 watt, 4' x 8', 99" X, 50" Y, 12" Z, 1999

Amada #LC2415A-IV-NT, 2500 watt, 99" X, 61" Y, 11.8" Z, Amada AMNC-F, dust collector, 2008, #82563

Amada #LC3015BIII, CO2 laser, 3000 watt, 5' x 10', shuttle table, chiller, dust collector, 1999

Amada #LC3015F0-NT Series CNC laser sys w/LST shuttle,4000 watt,120"x60"sheet,2006

Amada #LC3015F0NT, CO2 laser, 5' x 10, AMNC-F controller, dust collector, dual shuttle table, 2006

Amada #LC3015F1, laser, 4000 watt, Fanuc AF 400 iB, oscillator, AMNC-F, chiller, 2012

Amada #LC3015F1NT, laser cutting system,4000 watt,5'x10'sheet size,AMNC-F 32 bit,'11

Amada #LC3015F1NT IB, 4000 watt Co2 laser,500"staineless steel cut,AMNC-F ctrl,2011

Amada #LC3015F1NT, 4000 watt Co2, 60" Y, 120" X, linear dr, ASLUL300F1 automatic, 2011, #30254

Amada #LC3015F1NT, Co2 linear laser, 4000 watt, ASLUL300F1-R1 automation, 2012, #11848

Amada #LC3015F1NT, 4000 watt, 5' x 10', Amada AMNC-F, dust collector, dual shuttle, 2011

Amada #LC3015F1NT, 3-Axis, appox 5000 beam on hours, pallet shuttle, Fanuc C4000, 2014

Amada #LC4020F1NT, 6000 watt, 6' x 12', NOZ changer, 2010, installed 2012, #11782

Amada #LCG-3015, laser cutter, 3500 watt, 61.02" width, 121"X, 61"Y, 3.93"Z, AMNC ctrl.

Amada #LCG-3015, Co2 laser, 3500 watt, AMNC-F Control, 5' x 10' dual shuttle table, 2015

Amada #LCG3015AJ, fiber laser, 4000 watt, 2015, installed 2016, #11795

Amada #LCG3015NT, CO2 laser,3500 watt,5'x10',Amada AMNC-F Ctrlr,dust collector,2017

Amada #LMP3015, sheet loader, 5' x10',.024"-.236" ga., 2415 Pulsar Application, 2007, #23640

Amada #Lasmac-LC1212A-II, 1500 watt laser, 50" x50", Fanuc FS 16LB Control, 1998, turbo rebuilt

Amada #Pulsar-1212 Alpha 2, 2000 watt Co2 laser, 4' x 8', 1998

CNC MACHINERY & EQUIPMENT:
LASERS, CNC (Also See Plasma Cutters/Punches, CNC)