Browse: Machinery Electrical

Machinery & Equipment >

Tooling & Accessories >

Chucks: Lathe

TOOLING & MACHINERY ACCESSORIES:
CHUCKS: LATHE

Edward Andrews-Tooling and Workholding Specialists

There are 81 listings in this category
Update: Mon, Mar 8, 2021 12:03:37

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

6",8",9",10",12",15",18",24", Chucks, 3 & 4-jaw,hyd,manual,air & scroll,low price

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

6-1/4" Rohm #Duro-NC-160, 3-jaw, A1-5 chuck, 1.25"hole, 5500 RPM, #17219

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

6.5" Nikko #Nomura, hydraulic chuck, 3-jaws, A2-6 spindle nose, 1-7/8" hole, 6500 RPM

Tramar Industries Inc, Novi, MI 248-426-5555 (Email: sales@tramarindustries.com) Mauro Damino

6.5" Samchully #HS-06V1, 1.75" hole, 3-Jaw, hydraulic power chuck, SYH 1246CC-K hydraulic cyl.

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

8" x 18" Magna Lock vacuum chuck, like new condition, dump valve, vacuum pump, seal gasketing @ 40', 2005, #5918

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

9" ATS UC2 Quick-Change 225-68 3-Jaw lathe chuck w/A2-8 back

T & S Tool & Supply Co Inc, Holland, OH 800-525-8665 (Email: roger@tstool.com) Roger Thomas

9" x 7" x 7.5" Nobel #BM-4T box chuck jaws, matched, #30328 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

9" Skinner, 9"- 1-1/2"thru hole, 3-jaw chuck, $150.00, #2850

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

10" Hardinge #HMQ-310-6 Sure-Grip 3-Jaw lathe chuck, A2-6, 4500 RPM, #153062

Machinery Values Inc, Harrison, NJ 973-497-7540 (Email: mike@machineryvalues.com) Mike DeRisi

10" SMW Ultimate Chuck

SMS Engineering Inc, Oxnard, CA 805-443-7300 (Email: smsengineering@yahoo.com) Steve Sawochka

10" SP Sheffer, 3-Jaw power chuck, 3"hole, steel body, A1-8, s/n #10CC1922, #17222

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

10" Chuck Jaws, 10"long, 8.75"wide, 6.5"high, 3/4"holes, keyed, risers #30206 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

10" x 5.5" x 8", 4.5" Travel, 1" key width, matched set, #30739 (4 available)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

11.5"L x 4.375"W x 6.75"H Chuck Jaws, 1"holes, keyed, #30189 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

12" x 24" Chevalier / Kanetsu, electric chuck, no chuck control, chuck shows little or no wear

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

12" Cushman #1059012A08C V-01051, 2-1/2"thru hole, A1-8, steel body, s/n #FO-82434, #17227

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

12" Cushman #1059012A08C, 3-Jaw power chuck, 2-1/2"thru hole, A1-8, steel body, #17226

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

12" Cushman, 12" -3"thru hole, 4-jaw chuck, $450.00, #2848

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

12" MMK #SH-12II, 3-Jaw hydraulic power chuck

SMS Engineering Inc, Oxnard, CA 805-443-7300 (Email: smsengineering@yahoo.com) Steve Sawochka

12" Warner & Swasey, 4-jaw chuck, #6MT, live center mounted, 2 piece jaws

Belmont Machinery Co, Aurora, IL 630-844-9288 (Email: sales@belmontmachinery.com) Sales

12"L x 9"W x 7.5"H Chuck Jaws, 3/4"holes, keyed, risers, #30190 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

12.25"L x 5.5"W x 6.75"H Chuck Jaws, 3/4"holes, keyed, #30188 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

12-1/2" Bison #4314-12-1/2"/8, 4-jaw independant lathe chuck with A1-8 mount

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

13" Chuck Jaws, 13"long, 11"wide, 8.75"high, 1.25"holes, keyed, #30192 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

13" Chuck Jaws, 13"long, 11"wide, 8.75"high, 1.25"holes, keyed, #30191 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

13" Chuck Jaws, 13"long, 9.5"wide, 6.5"high, 7/8"holes, 7"center, #28372 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

14" x 36" Sundstrand mag.chuck, elec.,4"H,power grip ctrl,AC 220-440v,50-60Hz,DC 24v

Century Machinery Co, Los Angeles, CA 213-627-2847 (Email: sales@centurymachinery.com) Leon Dietch

15" Buck #2153R, 3-jaw Adjust-Tru latthe chuck, 4" thru hole, D1-8 Camlock mount

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

15" Kitagawa #B15, 3-Jaw hydraulic lathe chuck, A2-11 nose, #157165

Machinery Values Inc, Harrison, NJ 973-497-7540 (Email: mike@machineryvalues.com) Mike DeRisi

15" Skinner-Horton #3915D6B, 3-jaw chuck, Camlock D1-6 spindle mount

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

15" Skinner-Horton #3915D6B, 3-jaw chuck, Camlock D1-6 spindle mount

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

15" Chuck Jaws, 15"long, 9.5"wide, 8"high, 7/8"holes, 6"center, #28371 (4)

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: terry@prestigeequipment.com) Terry Lashin

15-3/4" Bison 4-Jaw independent lathe chuck with D1- back

T & S Tool & Supply Co Inc, Holland, OH 800-525-8665 (Email: roger@tstool.com) Roger Thomas

16" Cushman #6D, hyd,3-Jaw,12-1/8"lgth,4-1/2"bore ID top counter bore 7-3/4",6 bolts

Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

16" Cushman, Hydraulic 3-Jaw chuck, 16"diameter, 4.625"bore

Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

16" SMW #BB400-140-SS, air chuck, 5.5"bore

HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling

18" Buck #1316, 4-jaw independant lathe chuck with D1-6 mount

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

18" Huron Air Chuck #LP460, 3-jaw,11-3/4"lgth,6-1/2"bore ID,1"bolt diameter,6 bolts

Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

18" Irco, 3-jaw Gripper Chuck

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

18" Itw Woodworth Woodworth #UBL-18002, universal ball lok, 3-jaw power chuck, 2100 RPM, all mount, 2000

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

18" KCM #80018, 3-jaw wedge type power chuck, 5.156" thick, 11.779" plain back, 2000

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

18" Samchully #HC-18D, 3-Jaw, hydraulic chuck, A2-11, unused

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

18" Sutton Tool Tool, 3-jaw power chuck, A-11 mount, 2000 (5 available)

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

19" ATS Systems #BP-480-185 BT 7.3 ES, 7.28" hole, big bore extended stroke air cooled

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

19.5" Bison #4304-20, 4-jaw independant lathe chuck with 4.85" thru hole

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

19.5" Rohm #T-72964, 3-Jaw, 6.25"hole, quick change jaws, A2-11, skid of top jaws

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

20" Bison #4805-20, 4-Jaw, steel body, plain back, solid jaws, 7.48" thru-hole, new

Fabricating & Production Mchy, Worcester, MA 508-885-9973 (Email: machines@fpminc.com) Thomas Lowkes

20" Schunk 3-jaw extended stroke air chuck, 8"hole,1"travel per jaw,excellent cond

HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling

20" SMW #BB500-160, stationary mount air chuck, 6.3"bore, new surplus

HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling

21" 3-Jaw chuck, #11206

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

22" Schunk #ROTA TB 500-230 pneumatic steel chuck, with adapter plates

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

23-1/2" Manual 3-Jaw chuck, 5"length, 7-1/2"bore ID, 6 pin cam lock adapter plate

Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

23-1/2" Manual 4-Jaw chuck rev., 4-3/4"lgth,8-5/8"bore ID,11-3/16"top counter bore

Technical Machine Sales Inc, Longview, TX 903-753-1955 (Email: craig@tmsiusa.com) Craig Cave

24" Cushman 4-jaw heavy duty power wrench combination chuck with 8-1/8" hole

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

24" Cushman #G12, 6.5" Hole Direct Mount, No Jaws

Roskelley Machinery Corp., Salt Lake City, UT 801-313-0707 (Email: curt@roskelley.com) Curt Roskelley

24" Cushman #20-670-24-A15D, 3-jaw power chuck, flame treated, A-15 back, 2000 (5 available)

CNC Exchange div. Gray Machinery Co., Prospect Heights, IL 847-537-7700 (Email: glenn@cncexchange.com) Glenn Gray

24" Royal Machine & Tool, 4-Jaw self-centering hydraulic chuck, never used, 2014, #28280

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

24" Samchully 3- Jaw chuck #HCH-24B, 14L24B, chuck cylinder SYHL-2816CA-D, 13F009

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

24" Warner & Swasey 3-jaw chuck, 9" thru hole, A 15 back mount, 7-1/4" thick, 5-1/2" high bolt on jaws, #72158

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

24-1/2" Bison, 4-jaw chuck with 6-1/4" thru hole

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

24-3/4" Bison, 3-jaw chuck with 10-1/4" thru hole

Tooling Emporium LLC, Louisville, KY 502-419-9170 (Email: john@toolingemporium.com) John Kempf

25" ATS #BP-640-275, 3-jaw, 10-3/4" thru hole, adjustable grip force, Rohn Control, foot pedal

Adams Machinery Co, Lake Bluff, IL 847-673-0556 (Email: adams@adamsmachinery.com) Sonneborn

25" SMW, 3-jaw chuck, 12" bore, BB-ES-630-325, like new

Mobius Group LLC, Rock Falls, IL 815-285-2660 (Email: hotmetal@centurytel.net) David H Doctor

28" Cushman, 4-jaw, power wrench, independent jaws, 10"ID

HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling

28" 3-Jaw chuck, 8" thickness

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

30" Norton lathe chuck, 3-jaw chuck, 11-1/4" thru hole, a20 flat back

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

31" Rotomors #MC-ID, 4-jaw big bore chuck, 15" thru hole, hydraulic cylinder

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

31" Rotomors #MC-ID, 3-jaw big bore chuck, 15" thru hole, hydraulic cylinder

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

32" Atlas 4-jaw lathe chuck, #68696

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

32" Buck, 3-jaw universal head, 15-1/4" thru hole (4 available)

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

32" Noble lathe 3-jaw chuck, 14" thru hole, a-20 back (flat back), 7-1/2" th

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

35" Rohm #KFD-HS900/3, hydraulic, 3-jaw, 19"ID, A1-15 adapt plate

HTR Inc., Houston, TX 281-376-8950 (Email: sales@htr-tx.com) Mike Starling

36" Bullard 3-jaw chuck, universal or indepenant movement, #53591

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: sales@yodermachinery.com) Sales

36" 4-Jaw chuck without jaws, A15 spindle nose, 1.5"T-slot, $1000.00, #2419

Turners Machinery Inc, Santa Paula, CA 805-525-2171 (Email: rosa@turnersmachinery.com) Al Van Wagner

46" Bullard 4-jaw chuck

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

63" Precision 4-Jaw faceplate/chuck, 10.75" hole, 8" thick, (4) boring mill top jaws, plain back mount, like new, never used

Fabricating & Production Mchy, Worcester, MA 508-885-9973 (Email: machines@fpminc.com) Thomas Lowkes

Warner & Swasey, 4-Jaw chuck, 12"bore, #10336

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

Lathe chucks. D1-8 mtgs. BISON 16" -3 jaw direct, 5" hole, & SKINNER 28"-4 jaw C.I. flatback w/adapter, 5" hole. Both EXC!

WINN/DIXI Machine Tool Sales, Rockford, IL 815-874-4771 (Email: dickc@winndiximts.com) Dick Crosby

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

TOOLING & MACHINERY ACCESSORIES:CHUCKS: LATHE

6",8",9",10",12",15",18",24", Chucks, 3 & 4-jaw,hyd,manual,air & scroll,low price

6-1/4" Rohm #Duro-NC-160, 3-jaw, A1-5 chuck, 1.25"hole, 5500 RPM, #17219

6.5" Nikko #Nomura, hydraulic chuck, 3-jaws, A2-6 spindle nose, 1-7/8" hole, 6500 RPM

6.5" Samchully #HS-06V1, 1.75" hole, 3-Jaw, hydraulic power chuck, SYH 1246CC-K hydraulic cyl.

8" x 18" Magna Lock vacuum chuck, like new condition, dump valve, vacuum pump, seal gasketing @ 40', 2005, #5918

9" ATS UC2 Quick-Change 225-68 3-Jaw lathe chuck w/A2-8 back

9" x 7" x 7.5" Nobel #BM-4T box chuck jaws, matched, #30328 (4)

9" Skinner, 9"- 1-1/2"thru hole, 3-jaw chuck, $150.00, #2850

10" Hardinge #HMQ-310-6 Sure-Grip 3-Jaw lathe chuck, A2-6, 4500 RPM, #153062

10" SMW Ultimate Chuck

10" SP Sheffer, 3-Jaw power chuck, 3"hole, steel body, A1-8, s/n #10CC1922, #17222

10" Chuck Jaws, 10"long, 8.75"wide, 6.5"high, 3/4"holes, keyed, risers #30206 (4)

10" x 5.5" x 8", 4.5" Travel, 1" key width, matched set, #30739 (4 available)

11.5"L x 4.375"W x 6.75"H Chuck Jaws, 1"holes, keyed, #30189 (4)

12" x 24" Chevalier / Kanetsu, electric chuck, no chuck control, chuck shows little or no wear

12" Cushman #1059012A08C V-01051, 2-1/2"thru hole, A1-8, steel body, s/n #FO-82434, #17227

12" Cushman #1059012A08C, 3-Jaw power chuck, 2-1/2"thru hole, A1-8, steel body, #17226

12" Cushman, 12" -3"thru hole, 4-jaw chuck, $450.00, #2848

12" MMK #SH-12II, 3-Jaw hydraulic power chuck

12" Warner & Swasey, 4-jaw chuck, #6MT, live center mounted, 2 piece jaws

12"L x 9"W x 7.5"H Chuck Jaws, 3/4"holes, keyed, risers, #30190 (4)

12.25"L x 5.5"W x 6.75"H Chuck Jaws, 3/4"holes, keyed, #30188 (4)

12-1/2" Bison #4314-12-1/2"/8, 4-jaw independant lathe chuck with A1-8 mount

13" Chuck Jaws, 13"long, 11"wide, 8.75"high, 1.25"holes, keyed, #30192 (4)

13" Chuck Jaws, 13"long, 11"wide, 8.75"high, 1.25"holes, keyed, #30191 (4)

13" Chuck Jaws, 13"long, 9.5"wide, 6.5"high, 7/8"holes, 7"center, #28372 (4)

14" x 36" Sundstrand mag.chuck, elec.,4"H,power grip ctrl,AC 220-440v,50-60Hz,DC 24v

15" Buck #2153R, 3-jaw Adjust-Tru latthe chuck, 4" thru hole, D1-8 Camlock mount

15" Kitagawa #B15, 3-Jaw hydraulic lathe chuck, A2-11 nose, #157165

15" Skinner-Horton #3915D6B, 3-jaw chuck, Camlock D1-6 spindle mount

15" Skinner-Horton #3915D6B, 3-jaw chuck, Camlock D1-6 spindle mount

15" Chuck Jaws, 15"long, 9.5"wide, 8"high, 7/8"holes, 6"center, #28371 (4)

15-3/4" Bison 4-Jaw independent lathe chuck with D1- back

16" Cushman #6D, hyd,3-Jaw,12-1/8"lgth,4-1/2"bore ID top counter bore 7-3/4",6 bolts

16" Cushman, Hydraulic 3-Jaw chuck, 16"diameter, 4.625"bore

16" SMW #BB400-140-SS, air chuck, 5.5"bore

18" Buck #1316, 4-jaw independant lathe chuck with D1-6 mount

18" Huron Air Chuck #LP460, 3-jaw,11-3/4"lgth,6-1/2"bore ID,1"bolt diameter,6 bolts

18" Irco, 3-jaw Gripper Chuck

18" Itw Woodworth Woodworth #UBL-18002, universal ball lok, 3-jaw power chuck, 2100 RPM, all mount, 2000

18" KCM #80018, 3-jaw wedge type power chuck, 5.156" thick, 11.779" plain back, 2000

18" Samchully #HC-18D, 3-Jaw, hydraulic chuck, A2-11, unused

18" Sutton Tool Tool, 3-jaw power chuck, A-11 mount, 2000 (5 available)

19" ATS Systems #BP-480-185 BT 7.3 ES, 7.28" hole, big bore extended stroke air cooled

19.5" Bison #4304-20, 4-jaw independant lathe chuck with 4.85" thru hole

19.5" Rohm #T-72964, 3-Jaw, 6.25"hole, quick change jaws, A2-11, skid of top jaws

20" Bison #4805-20, 4-Jaw, steel body, plain back, solid jaws, 7.48" thru-hole, new

20" Schunk 3-jaw extended stroke air chuck, 8"hole,1"travel per jaw,excellent cond

20" SMW #BB500-160, stationary mount air chuck, 6.3"bore, new surplus

21" 3-Jaw chuck, #11206

22" Schunk #ROTA TB 500-230 pneumatic steel chuck, with adapter plates

23-1/2" Manual 3-Jaw chuck, 5"length, 7-1/2"bore ID, 6 pin cam lock adapter plate

23-1/2" Manual 4-Jaw chuck rev., 4-3/4"lgth,8-5/8"bore ID,11-3/16"top counter bore

24" Cushman 4-jaw heavy duty power wrench combination chuck with 8-1/8" hole

24" Cushman #G12, 6.5" Hole Direct Mount, No Jaws

24" Cushman #20-670-24-A15D, 3-jaw power chuck, flame treated, A-15 back, 2000 (5 available)

24" Royal Machine & Tool, 4-Jaw self-centering hydraulic chuck, never used, 2014, #28280

24" Samchully 3- Jaw chuck #HCH-24B, 14L24B, chuck cylinder SYHL-2816CA-D, 13F009

24" Warner & Swasey 3-jaw chuck, 9" thru hole, A 15 back mount, 7-1/4" thick, 5-1/2" high bolt on jaws, #72158

24-1/2" Bison, 4-jaw chuck with 6-1/4" thru hole

24-3/4" Bison, 3-jaw chuck with 10-1/4" thru hole

25" ATS #BP-640-275, 3-jaw, 10-3/4" thru hole, adjustable grip force, Rohn Control, foot pedal

25" SMW, 3-jaw chuck, 12" bore, BB-ES-630-325, like new

28" Cushman, 4-jaw, power wrench, independent jaws, 10"ID

28" 3-Jaw chuck, 8" thickness

30" Norton lathe chuck, 3-jaw chuck, 11-1/4" thru hole, a20 flat back

31" Rotomors #MC-ID, 4-jaw big bore chuck, 15" thru hole, hydraulic cylinder

31" Rotomors #MC-ID, 3-jaw big bore chuck, 15" thru hole, hydraulic cylinder

32" Atlas 4-jaw lathe chuck, #68696

32" Buck, 3-jaw universal head, 15-1/4" thru hole (4 available)

32" Noble lathe 3-jaw chuck, 14" thru hole, a-20 back (flat back), 7-1/2" th

35" Rohm #KFD-HS900/3, hydraulic, 3-jaw, 19"ID, A1-15 adapt plate

36" Bullard 3-jaw chuck, universal or indepenant movement, #53591

36" 4-Jaw chuck without jaws, A15 spindle nose, 1.5"T-slot, $1000.00, #2419

46" Bullard 4-jaw chuck

63" Precision 4-Jaw faceplate/chuck, 10.75" hole, 8" thick, (4) boring mill top jaws, plain back mount, like new, never used

Warner & Swasey, 4-Jaw chuck, 12"bore, #10336

Lathe chucks. D1-8 mtgs. BISON 16" -3 jaw direct, 5" hole, & SKINNER 28"-4 jaw C.I. flatback w/adapter, 5" hole. Both EXC!

Lathe chucks. A2-11 mtgs, 18" -3 jaw LOGAN power, direct, and 21" GISHOLT & 25" POLISH 4 jaw direct. All good!

TOOLING & MACHINERY ACCESSORIES:
CHUCKS: LATHE