Browse: Machinery Electrical

Machinery & Equipment >

Water Jet Cutting >

Waterjet Cutting

WATERJET CUTTING

There are 146 listings in this category
Update: Thur, Nov 21, 2019 00:34:06

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

ABB Ingersoll-Rand Acculine #RP-126, 55000 psi, 6' x12' cuting area, 50 HP, 400 IPM, Burney 10, rebuilt 2014

T.A.C. Assets, Fairborn, OH 937-477-7712 (Email: larry.beam@sbcglobal.net) Larry Beam

Alltra Waterjet, 15' W x 44' max cutting area, Jet Edge 55-150 Intensifier, Burny 10 Controller, rebuilt, in plant, #7266

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Alltra Corp #PG14-12WJ, 120" x 468" 2-head CNC waterjet, 150 HP, 55000 psi, 2007

R A B Industries Inc, Washington, MI 586-752-0090 (Email: rabind@comcast.net) Rod A Blasius

Calypso #Hammerhead waterjet, 5' x10', single head, 30 HP, 60k psi, chiller, water cleaning system, upgraded computer, board, software

Hildebrand Machinery Co Inc, York, PA 717-846-2600 (Email: dave@hildebrandmachinery.com) Dave Hildebrand

Calypso #Hammerhead, waterjet cutting system, 6' x 12' cutting area, 100 HP, 60000 psi, 2005

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Calypso #Hammerhead-126, waterjet cutting system, 12' x 6', 100 HP, 60000 PSI, 2005

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Calypso #Hammerhead-510, waterjet cutting system, 5' x 10' cutting area, 139.5" x 67" table, 60 HP, 60000 psi, 2007/2014

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Calypso Shark #LWA, dual head waterjet cutting sys, 75 HP, 10' x20' table, Calyso Controlr, 2007

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Calypso Shark 6x12, 55k psi, 50 HP, new CPU, way covers, 6000 hours

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow #1-18-15, 6-Axis low rail gantry type water jet, 240" x 120" x 36" capacity, used, 2009, #C5097

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow #4X8-Dynamic, Hyplex Pump, 60000 psi, Flowmaster 6 Software, #7348

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Flow #6012, FlowMaster CNC, 72" X, 144" Y, 6000 psi, 50 HP, 2007

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Flow #6012, water jet, 6' x 12', 60000 psi Intensifier Pump, Dynamic Cutting Head, 2005, #7434

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Flow #6012, water jet, 6' x 12', 87000 psi Flow Hyperjet Intensifier Pump, 2008, #7433

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Flow #712207-1, water jet, intergrated flying bridge, 48" x 96" work area, 50 HP, 2004

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow Integrated Fly.Bridge #71400, 5'9" x 23'9", 60k PSI intensifier pump, Flow controls, '06

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Flow #714000-1, water jet, 7' x 12' double bed, 60000 psi, 10k hrs, 2005

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow #A-Series, CNC waterjet cutting system, 5' x 10', 60 HP, 55000 psi, Allen Bradley 9 Series CNC, 1996

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Flow #A-series, waterjet, 5' x 10', 60 HP, 55000 PSI, Allen Bradley Series 9 Control, 1996

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow AF6080, 0-900 IPM traverse speed X/Y, 24" Z-axis, 0-400 IPM, 8' bridge, 2008

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Flow #Bengal, 4' x 4' CNC Waterjet Machine, 50000 psi, 30 HP, Flow Master PC Control, 1997, #5429

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

Flow #Bengal 4 x 4 Eagle Waterjet, 4' x4' cutting area, 30 HP, 60000 psi, Flowmaster 4 software, 1998, #7022

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Flow #Bengal, 2' x 4', Accuracy .005", 39.3" X, 19.6" Y, 6" Z, 2003

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow #I4800, Integrated Flying Bridge Water Jet, 30 HP, 4' x8' work envelope, 2400 hrs, 2003

Sanson Machinery Group, Kirkland, WA 425-513-8263 (Email: aduenas@sansonmachinery.com) Ryan Ross

Flow #I4800, flying bridge, CNC waterjet, 4' x 8' table., 96" X, 48" Y, 8" Z, rapid traverse

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Flow #I6012, Integrated Flying Bridge, 60000 psi, 6' x 12', 50 HP, 2000, #A5869

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow #I6024, waterjet, dual 6' x 24' work envelope, 60000 psi, 50i-S II ESL intensifier pump, 2006

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow #IFB, 6' x 24', CNC water jet cutting, dynamic cutting head, 87000 psi, 50 HP, 2009

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

Flow #IFB, waterjet w/Dynamic cutting, 100 HP intensifier, 87000 psi, 6' x24' max cut capacity

Equilibrium Machinery, Waukesha, WI 414-534-7512 (Email: anthony@equilibriummachinery.com) Anthony Zenobia

Flow #IFB612, Dynamic Waterjet, 6' x 12', 50 HP, 60000 PSI, Flowmaster Controlr, 2006

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow #IFB624, waterjet, 6' x 24', 100 HP, 60000 PSI, Flow PC Based CNC Controlr, 2008

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow #IFB4400, 4' x4', 51.1" x 51.1" table., 50 HP, Flowmaster control, Garnet system, 2421 hrs., 2008

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow #IFB4800, CNC jet cutting, 48" x 96" table, 60000 psi, 50 HP, 8" Z-Axis, 2006, #81277

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Flow #IFB6012, 6' x12', 30 HP, 55000 psi, Hyplex pump, Dynamic head, 3940 hrs, 2003

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow #IFB6012, waterjet cutting sys, 6' x12', 50HP, 60000psi, Flowmaster PC based CNC, 2006

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Flow #IFB6012, 144" X, 72" Y, 7" Z, Flowmaster PC, 87000 psi, 50 HP, 300 IPM, 2008

Champion Machinery Inc, Fort Mill, SC 803-548-8000 (Email: dale@championmachinery.com) Dale Danahey

Flow #IFB6012, 6' x 12' cutting area, Dynamic cutting, 60000 psi, 50 HP, 2008, #81417

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Flow #IFB6012, waterjet, 6' x 12', 50 HP, 60000 PSI, Dyanmic cutting, 600 lb. hopper, 2008

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow #IFB6012, waterjet, 6' x 12', 50 HP, 87000 PSI, Flowmaster PC Based Controlr, 2008

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow #IFB6012, 6.5' x13', 100 HP, 94000 psi, Flowmaster PC Based CNC Control 2004

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Flow #IFB6012, 6' x 12', 100 HP, 87000 psi intensifier, 2007, #36479

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow #IFB6012, Dynamic, 60k psi, Ebbco chiller, additional cutting head fixture, exc, '06

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow #IFB6012, Dynamic, 60k psi, hopper, 9k hrs, latest version of Flow software, exc, '08

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow #IFB6012, 6' x12', 60 ksi intensifier pump, integrated flying bridge, 50is pump, #A5422

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow #IFB6024, 6' x 24' cutting area, 24" table width, 6" table length, 87000 psi, 50 HP, Flowmaster PC-based CNC Control, 2009, #81451

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Flow #IFB6024, 6' x 24', 100 HP, 87000 psi Dual intensifier, Dynamic Head, 2009

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow #M3-3020B, waterjet cutter, 6' x 10', 172" L x 180" W x 87" H, abrasive hopper, 2013

Westway Machinery Ltd, Mississauga, ON 905-803-9999 (Email: sales@westwaymachinery.com) Sales Dept.

Flow #M3-4020B, 94000 psi, 157" x 78" travels, 2015

Active Machinery Sales, Apex, NC 800-377-7553 (Email: sales@activemachinery.com) Mike Sawaia

Flow #M4C-4020 Dual, 1400" /min. traverse range, 156" x 78" table, hyperjet, excellent, 2012

T & S Machine Tool Sales Inc, Newtown, OH 513-527-4410 (Email: jleigh@tsmachine.com) Thomas Speed

Flow #MS-3120B, Flying bridge waterjet cutting system 120" x 72" table, 55000 psi, 40 HP, FlowMaster 6 control, 2010

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Flow Mach 2 2013B, 6' x10', 50 HP, Hyplex Pump, 580 hours, 2015

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow Mach 2 2031B, 30 HP intensifier pumps 60k PSI, 6' x 10' table, 2013

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Flow Mach 2 2031B, waterjet, 6' x10', 55k psi, water recovery, Ultrapierce, 50 HP, 2016

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow Mach 2 4020B, 6.5" x 13', 50 HP Hyplex pump, 3975 hours, solid removal system, 2012

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow Mach 2 4020B, 6.5' X 13' Waterjet Cutting System, 50 HP, Flow PC Based CNC Controller, 2012

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow Mach 3 2513B, 4' x 8' waterjet cutting system, 50 HP, Flow PC Based Controlr, 2015

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow Mach 3 2513B, 4' x 8', 100 HP, 60000 psi, dynamic head, Waterveyor, 2015

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow Mach 3 2513B, 4' x 8' waterjet cutting system, 2012, #A5908

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow Mach 3 4020, 87k PSI, 13' x6.5', Dynamic cut, Paser 4 cut.head, Media Blaster, 09/15

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow Mach 3 4020B, Flowmaster control, 13' x6.5', 100 HP, 87000 PSI, 2008

520 Machinery Sales LLC, Schaumburg, IL 847-275-5014 (Email: zeno@520machinery.com) Zeno Molteni

Flow Mach 3 4020B, Dynamic Hyperjet, 12' x 6', 100 HP, 87000 PSI, Flowmater Controlr, 2008

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow Mach 3 4020B, 2M x 4M, Dynamic, 100 HP, 4500 hours, Waterveyor System

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow Mach 3 IFB, 6' x12', 100k psi Hyperpressure pump, Dynamic hd, 2700 total hrs, 2008

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

Flow Mach 3B, 72" x 144" table., 92000 psi, 100 HP, Flow PC Based Control, 2010, #80271

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Flow Mach 3B 4020-DWJ, 6.5" table width, 13" table length, 87000 psi, 100 HP, Flow PC Control, 2015, #81604

Machinery Resources Intl, Simi Valley, CA 818-346-7985 (Email: inquiries@machineryresources.com) Sales Dept.

Flow Mach 4 3020C, 6' x10', 94000 psi, 100 HP, Flow CNC, 5-Axis cutting head, 2016, #29572

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Flow Mach 4 3070C, 10' x 22'11", 100 HP, 94000 PSI, dual dynamic head, 2012

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Flow Mach 4 4020B, waterjet, 6' x 12', 60 HP, Mitsubishi M720 CNC Controlr, 2012

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Flow Mach 4 4020B 044917, 5-axis, 9' x15" cutting capacity, 90k psi, auto lube, 2010, #A5480

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow Mach 4 4020B, 94000 psi, 84" x 156", 2014

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Flow Mach 4 4020B, water jet, 94000 psi, 6'5" x 13' table, 84" X, 156" Y, 10" Z, 2014

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow Mach 4 4020B 94, 94k psi, 84" X, 156" Y, 6" Z, 157" x 79" table, Flowmaster 6.7, 2014

Machinery Marketing International, Chicago, IL 312-226-4150 (Email: eric@mmi-direct.com) Eric Kornacker

Flow Mach 4 4020C, 5-Axis Waterjet, 60000 psi, 13'1" x 6'6" travel, 1600 hrs, reduced, 2012

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow Mach 4C, flow dual head bridge, 5' x 10' capacity, #C5111

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Flow #WJP-1313, 4' x4' cutting, 55000 psi, 1287 hrs, abrasive hopper, 2007, #3955

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Flow #WMC-4020, 50 HP, 60000 psi, 6.5' x13' cut, 78.75" X, 157.5" Y, 6" Z, CNC waterjet, 2003

Equilibrium Machinery, Waukesha, WI 414-534-7512 (Email: anthony@equilibriummachinery.com) Anthony Zenobia

Flow #WMC-4020, 157.5" x 78.75", 6" Z travel, Pacer ECL cutting hd, 50 HP, 60k psi, '10, #29628

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Flow, water jet, 6' x 12', 60000 psi, 2005

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Flow Waterjet, 6' x12', 3-Axis CNC Cutting Sys, 60k psi, Dynamic cutting hd, Pedestal Control

Charleston Annex Corporation, Indian Trail, NC 704-821-7370 (Email: markm@charlestonannex.com) Mark Mannion

Ingersoll-Rand Acculine #RP-126, 55k psi, 6' x 12' table, 50 HP, Burny 10 CNC, 1999, #29525

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

IWM #1313H, waterjet, 4' x 4', 6" motorized Z, 60k PSI intensifier, chiller, spares, 5 hrs

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

J.B. Technical Services water table, 21' L x 10'6" W ID, 22'4" L x 10'10" W OD, '14, $25000.

Symco Structural Inc, San Angelo, TX 325-277-3217 (Email: josh@jstephensllc.com) Josh Stephens

Jet Edge #21X1MR, waterjet cutting, 21' x13' travel, hopper, chiller, 7500 hours, 2009/2016, #7366

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Jet Edge #21x13MR, 13' x 21', 90000 psi dual intensifier, 2009

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Jet Edge #48XY, waterjet, 4' x 8', 30 HP, 55000 PSI, Fanuc Control, Chukar 4 hd cutting, 1998

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Jet Edge #Alltra Gantry, 40' x 10' Water Jet, 2007

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Jet Edge #HR612, waterjet, 6' x 12', 50 HP, 55k PSI, Aquavision Di PC Based Controlr, 2008

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Jet Edge, 6' x 12', 50 HP, 144" X, 72" Y, 12" Z, 60000 psi, high-rail, gantry type, 1.1 GPM intensifier pump, 2008

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Knuth #Eco-Jet-0515, 10 HP, waterjet, 24" x 59" cutting bed, 35000 psi intensifier, 2009, #10403

Yoder Brothers Machinery, Holland, OH 419-269-2000 (Email: yoder@yoderbrothersmachinery.com) Ryan Yoder

Knuth #EcoJet-0515, 24" x 59", 10 HP, 35000 PSI, 2010

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Knuth #Ecojet-0515, waterjet, 29" x 60", 2010, #11507

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #AKS-X3-612, 144" x 72", 90000 psi, Siemens Simatic HMI control, 2015

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Mitsubishi Classica #CL3000, waterjet, 5.5' x 10' table, Mits 700 Series CNC, 2-3-Axis

MBI Worldwide LLC, Vernon Rockville, CT 860-202-8550 (Email: edfreligh@comcast.net) Edward Freligh

Mitsubishi #MWX-3, 60 HP, 90000 psi, 6' x12' table., 144" X, 72" Y, 10" Z, Mitsubishi 700, 2012

Manufacturing Solutions, Santa Ana, CA 714-545-0940 (Email: angela@manufacturesolutions.com) Mike Dieveney

Mitsubishi #MWX3-612, waterjet, Mitsubishi control - no taper control, 5600 hours, 2013

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #MWX3-612 X3-Series, waterjet, 6' x 12', Mitsubishi M720 CNC Controlr, 2015

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Mitsubishi #MWX4, CNC waterjet, 6' x 12', 2012 - installed 2013, #11427

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Mitsubishi #Suprema, 90k psi, KMT pump, 78" x 165" x 6", 60 HP, Mits control, garnet retreival

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

Mitsubishi #Suprema, 78" x 165" x 6", 90k psi, 60 HP, water recyle, garnet retreival, 11735 hrs

Standard Industrial Machinery, Oxford, AL 256-831-1211 (Email: Sales@standardindl.com) Robert O'Neal

Mitsubishi, 6' x 12' water jet, 2008

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Multicam #3000 Series Zero Hour, waterjet, 10' x 5', 30 HP, 60k PSI, Multicam EZ Controlr, 2010

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Multicam #V-204, CNC water jet, 120" X, 60" Y, 3.5" Z, 800 IPM, 55000 psi, 40 HP, 2013, #8446HP

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

Omax #80X-2, 6' x 26', 50 HP EnduroMax pump, A-Jet 5-Axis head, dual SRS cleanout sys, '13

Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman

Omax #120X, 10' x20' precision abrasive waterjet, Omax EnduroMax 5060V VFD pump, '11

Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman

Omax #2652, waterjet, upgraded computer & drives 2011, 20 HP 40k psi pump, 1998

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Omax #2652, waterjet, 26" x 52", 30 HP, 50000 PSI, Omax PC Based Controlr, refurb.'19, 2000

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Omax #2652, 26" x 52", 40 HP, 55000 PSI, Til-a-Jet, 134 hours, 2008

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Omax #2652, CNC Water Jet Cutting, Omax CNC Control, 52" X, 26" Y, 8" Z, 15006 Hrs, 2001

Inter-Plant Sales, Hugo, MN 651-207-8203 (Email: ricktcanniff@aol.com) Rick Canniff

Omax #2652, 26" x 52", 40k PSI, Maxjet 5i nozzle, ball screw drive sys, hopper, 2001, #32528

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Omax #55-100, CNC waterjet with Tilt-A-Jet, 100" x 55" work envelope, 40 HP, 2011-2012 (2 available)

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Omax #55100, 55" x 100", 30 HP, 50000 PSI, Til-a-Jet, 2007

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Omax #60120, 5' x 10', 30 HP, 50000 PSI, Til-a-Jet, 2008

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Omax #80160, 6' x12', 40 HP motor replaced'17, 60k PSI, water softener/filters, 1999, #32886

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Omax #80160, 80" x 160", 40 HP 4055V direct drive pump, water level control, PC base control, '04

Zimmerman-McDonald Machinery Inc, Saint Louis, MO 314-291-9360 (Email: brad@zimmermanmcdonald.com) Brad Zimmerman

Omax #80160, CNC waterjet, 40 HP high pressure pump, 50000 psi, 174" x 89" table, #3782

Trader Machinery Inc, Concord, ON 905-669-7507 (Email: emilio@tradermachinery.com) Emilio Tarsitano

Omax #F1530, 50000 psi, 5' x10' capacity, 30 HP, Omax PC based CNC control, 2015, #C5108

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Omax #MDC120X, 10' x 20' Precision Abrasive Waterjet, 50 HP, 60000 psi, 2011, #3084

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

Omax #Maxiem-1515-II, 5-Axis head, 62" x 62" x 6" travels, 30 HP, 50000 psi, chlr, 2015, TK-21044

Action Machinery Co Inc, Bethlehem, PA 610-691-6677 (Email: sales@actionmachinery.com) Tom Khoury

Omax #Maxiem-1530 waterjet, 5' x10', 20 HP 50000 psi M20 pump, lrg hopper, 24 hrs, 2016

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Omax #Maxiem-1530, 5' x10', 40 HP, Maxiem 2 membrane w/ water softener, 2018, #A5889

Sterling Machinery Exchange, South El Monte, CA 626-444-0311 (Email: adam@sterlingmachinery.com) Adam Mattes

Omax #Maxiem-2040, Waterjet Cutting System, 30 HP, 6' x 12', Omax PC Based Controlr, Omax Enduromax P3050V, 2010

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Omax #Maxiem-2040, waterjet, 5' x 10', 30 HP, 60000 PSI, Windows Base PC Control, 2017

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Omax #Maxiem-2040, 157" x 78", 12" mtrzd Z, solid removal sys, 300 hrs, warranty, 2017, #32769

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Omax #MicroMAX abrasive waterjet, 25" x 25", 60k psi, repeatability +/- 2.5 Microns, '15, #30183

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Romeo Engineering #Silver-Series, waterjet, 5' x 10', 30 HP, 60k PSI, Windows PC Control, '10

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Techni #510, waterjet, 5' x 10', 30 HP, 60000 PSI, Intec CNC Control, hyd intensifier, 2005/18

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Techni #612-G2, 6' x 12' Waterjet, AM2000 CNC controller, 2012

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Techni #Intec-612, waterjet, PC based CNC, 66 HP, 66000 psi, 6' x12' cutting area, 2010

Machine Tool Technologies, Milwaukee, WI 414-486-9700 (Email: joe@mac-tech.com) Joe Ryan

Techni #Intec-612, waterjet, 6' x 12', 55000 psi, 144" X, 72" Y, 4.5" Z, CNC Control, 2010

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Technijet #TJ3000-X2, 5' x10', 65000 psi, 50 HP, KMT intensifier, chiller, hopper, '06, #29396

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

Techni #TJ4000-X3, 6' x 12', 40 HP, 2013, #35816

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Techni #TJ4000-X3, Waterjet, 6' x 12' cutting area, 2015

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Techni #TJ4000-X3, abrasive waterjet cutting sys, 6' x12' cut area, Technic PC Control, 2017

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Techni #TJ4000X3, 144" x 72", 53000 psi, 700 IPM, 8" material thickness, 40 HP, 2013

Asset Exchange Corporation, Elk Grove Village, IL 773-866-9600 (Email: sales@assetexchangeinc.com) Gregg/Mark

Techni #TechJet-3000-x2, waterjet, 5' x 10', 50 HP, 2006, rebuilt 2015

Revelation Machinery, Elgin, IL 816-330-2138 (Email: sales@revelationmachinery.com) Tanner Arnold

Techni #Techjet-3000-X2, 5' x 10', 50 HP KMT 60000 psi pump, 2006

Machinery Network Inc, Encino, CA 818-465-6700 (Email: sales@machinerynetwork.com) Sales Dept.

Techni #i510-G2, 5' x 10' waterjet cutter, 2017, #3075

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

Techni #i510-G2, water jet, 2017, #11447

Jordan Craig Machinery Intl L, New City, NY 845-398-0073 (Email: jc@jordancraigmachinery.com) Jordan Craig

Techni #i510-G2 waterjet cutter, 5' x 10', 55000 PSI, AM2000 Controlr, 8" max thickness, 2017

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Ward Pro recycling unit, 2012, new cost 80k

Machnet, Santa Monica, CA 310-909-2020 (Email: sales@machnet.com) G. Taubman

Wardjet #RRX-1016, Water Jet 3 Head, 2014, #3095

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

Wardjet #Z3043, dual carriage CNC waterjet cutting system, 10.1' x 14.1" cutting area, 90000 psi, 5040 hours, 2015

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

Wardjet #Z3043, 10' x14' dual head water jet cutter, (1) 5-Axis hd, (1) sgl Axis hd, 2015

Industrial Plant Equipment, Northbrook, IL 847-998-8882 (Email: sales@ipeinfo.com) Jerry Kolb

Wardjet #ZX3043-5, 5-Axis waterjet, 5' x 14', 50 HP, 60000 PSI, Wardjet Controlr, 2015

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

Waterjet Pro #2031, water jet cutting, 6'6" X, 10'2" Y, 8" Z, programmable 0-300 ipm, WSI 50 HP 60k psi pump, 2005, #7326

Superior Machinery, Burt, MI 989-770-4827 (Email: surplus.record@superiormachinery.com) Keith McKay

Waterjet USA #DX510/J/S50/S Suprema, Mits CNC, 4-Axis, 5-1/2' x11', ITC, 60k KMT pump

Machinery Solutions Inc, Lexington, SC 803-359-7000 (Email: carl.amick@machinerysolutions.com) Carl Amick

Back to Machinery & Machine Tool listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller Video

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search