Browse:  Machinery Electrical Find Suppliers...      By Geographical Location    By Name or Partial Name    By Equipment Specialty

COIL HANDLING EQUIPMENT:
STRAIGHTENERS, FLAT & SHAPE (Also See Straighteners, Flat, Straight & Angle)

1" Kane & Roach #1AHM, 20 roll 2 plane shape straightener, 6" roll diameter, 50 HP, #62014

      

4" x .085" Rapid-Air #SC4-P, 9 straightening rolls, 1.25" diameter, 2 entry/exit rolls, #159580

      

4" x .085" Rapid-Air #SS4, straightener

      

4" x .085" Rapid-Air #SS4, flat & shape straightener

     

4.72" x .040" Bruderer #10-120, reconditioned flattener, serial #300032, #1138

   

4.7" x .049" Arku #1012/B, precison straightener, 19 roll, 10mm diameter rolls, 1971, #14028J

      

4.72" x .196" Dynamic Feeds #BRM19/120/12/U, hydraulic operation, #152025

      

5" x .090" PRE #PR-HD-05-110-RS, straightener, 2.75"dia. roll, 2 HP

      

5" Bruderer #24-320, double straightener/leveller, 19 rolls, 1.24" roll diameter, 1983

      

6" x .062" Cooper Weymouth #6SPS, straightener, 17 straightening rolls, variable speed

      

6" x .062" CWP straightener, loop control, 17 rolls, entry/exit pinch rolls, #72992

      

6" x .062" CWP, 17-roll flat & shape straightener, 15/16" roll diameter, variable speed, loop Control

     

6" x .062" CWP, straightener, 15/16" roll dia., 3/4 HP, portable, 1962

      

6" x .075" CWP #6A, coil straightener, 6-straightening rolls, 1/2 HP, 120-600 IPM, #7541P

      

6" x .078" CWP #6EFT, 7-roll straightener, entry/exit pinch, 75 FPM, #11065

      

6" x .125" CWP #6B, 2" 7-roll, power straightener, vari-speed, mounted ctrls, 1991

      

6" x .145" Durant #MDS-6, straightener, 7-roll, 2" roll diameter, 2.25" roll spacing, 22-60 FPM, #158310

      

6" x .312" CWP #6HDC, coil straightener, peeler table, split gear train, vari-pneumatic pinch rolls, 3 HP, 2012, #8175HP

      

8" x .010/.093" CWP #8SPS, serial #SPS 2261, 17 rolls, 1-1/4"dia., #774

   

8" x .018" Littell #308-7PDS, powered straightener, 7 roll, entry pinch rolls, dancer arm, Woods Etrac variable speed frequency drive

      

8" x .018" Littell #308-7PDS, straightener, 7-roll, entry pinch rolls, dancer arm

      

8" x .018" Littell #308-7PDS, 7-roll straightener,entry pinch rolls,dancer arm,good condition,#13619J

      

8" x .03" Littell #308-7PDS, flat & shape straightener, 7 rolls, dancer arm, manual adj

      

8" x .03" Littell #308-7PDS, flat & shape straightener, 7-rolls, variable speed, loop arm Control

      

8" x .03" Littell #308-7PDS, straightener, 3 over 4 roll configuration, 2" manual pinch rolls, dancer arm, manual adjustment, cabinet mounted, 1972 (2 available)

      

8" x .032" Littell #308, coil straightener,3 over 4 rolls,1 HP,41"pass line,#27518

      

8" x .04" Littell #308-9PDS, straightener, 9-roll, entry pinch rolls, variable speed frequency drive

      

8" x .040" Littell #308-9PDS, 9-roll straightener,entry pinch rolls,good condition,#13624J

      

8" x .040" Littell #308-9PDS, straightener, 9-roll, V/S frequency dr, entry pinch rolls

      

8" x .041" Littell #308, Loop control arm, 1 HP, #5043HP

      

8" x .050" Littell #308-7PDL, motorized straightener,s/n #87531-83, #1106

   

8" x .062" Littell #308-7PDS, motorized straightener, 7 straightening rolls, 20-120 FPM

      

8" x .062" Littell #308-7PDS, flat & shape straightener, 7 rolls, 20-120 SPM, 1 HP

      

8" x .109" Niagara #200-7-8, straightener, 7-roll, entry & exit pinch, 42" pass line

      

10" x .095" Rowe #A10, 7-roll, V/S pinch rolls

      

10" x .105" Rowe #A10, motorized straightener, 7 straightening rolls

      

10" x .105" Rowe #A10-3J, flat & shape straightener, 7-rolls, variable speed, loop Control

      

10" x .120" Bruderer #18260, 10"W,19-roll precision straightener,recond.,s/n 40184,#1043

   

10" x .125" Egan #S20-610, flat & shape straightener, 3 over 3, variable speed, forward/reverse

      

10" x .125" Rowe #A-10, 7-roll straightener, entry/exit pinch rolls, vari-speed, #14042J

     

10" x .125 SMS #S10-521, coil straightener, 7-rolls, variable speed 35-105 FPM, forward & reverse, 2007

     

10" x .130" Durant #VS-MD-10, 7-rolls, 2"dia., powered entry & exit pinch rolls, #14189

     

10" x .13" Durant #VS-MD-10, powered coil staightener, 7 rolls, 2" diameter rolls, 0-100 FPM, 1-1/2 HP, #14171

     

12" x .015"-.080" Perfecto #17-12-7, straightener,2 HP,manual roll adjust,'92,#7299P

      

12" x .018" Cooper Weymouth #12A, straightener, 7 rolls, 1-1/2" roll diameter, 42" pass line, 10-50 FPM, 3/4 HP, #160663

    

12" x .020"-.175" American Steel Line #3-11, motorized straightener,s/n 7394,#1268

   

12" x .025" Littell #212-17, 17-roll, entry & exit pinch rolls, vari-speed frequency dr

     

12" x .025" Littell #212-17PD, 17-roll straightener,entry & exit pinch rolls,Lincoln lube system,good condition,#13616J

      

12" x .025" Littell #212-17PD, 17-roll straightener, entry & exit pinch rolls

      

12" x .025" Littell #212-7, flat & shape straightener, 17-rolls, central lube, 150 FPM

     

12" x .03" Littell #212-17PD, straightener, 17-roll, entry & exit pinch rolls, lube system, variable speed frequency drive

     

12" x .03" Littell #212-17PD, 9 over 10 rolls, pinch rolls on both ends, #54826

      

12" x .03" Littell #212-17PD, flat & shape straightener, 17-rolls, lube system, variable speed

      

12" x .03" Littell #212-17PD, straigthener, 17-roll, entry & exit pinch rolls, photo eye loop control, Oil Rite lube system, variable speed frequency drive

     

12" x .03" Littell #312, flat & shape straightener, 9 rolls, Bijur lube system, 30-180 FPM

      

12" x .032" Littell #212-17, flat & shape straightener, 17-rolls, lube system, loop Control

      

12" x .035" Littell #212-17, 17-roll straigthener,entry & exit pinch rolls,Lincoln lube system,good condition,#13608J

      

12" x .035" Littell #212-17, 17-roll straightener,entry & exit pinch rolls,Lincoln lube system,good condition,#13625J

      

12" x .035" Littell #212-17, flat & shape straightener, 17-rolls, Lincoln lube system, variable speed

      

12" x .035" Littell #4-12.5MD, powered straightener, 7-roll, 3-1/8" dia., 2 powered entry rolls

      

12" x .06" Littell #212-17PD, straightener, 17-roll, entry & exit pinch rolls, photo eye loop control, Oil Rite lube system, variable speed frequency drive, 1989

      

12" x .06" Littell #212-17PD, straightener, 17-roll, entry & exit pinch rolls, photo eye loop Control, lube system

     

12" x .06" Littell #212-17PD, flat & shape straightener, 17-rolls, lube system, loop Control

      

12" x .06" Littell #312, straightener, 2-pinch rolls, 3-1/2" pinch roll diameter, 40" feedline height, powered driven lower roll, adjustable upper pinch roll, 120 FPM

     

12" x .063" Aida #LS-3028, flat & shape straightener, 7-rolls, loop photo eye, 2.2 HP

      

12" x .065" CHS #CHS-LAM2-21-12, powered straightener, 17 roll straigthening, entry & exit pinch rolls, lube system, vari-speed frequency drive, photo eye loop control

      

12" x .065" Coil Handling Systems #CHSLAM2-21-12, 17-roll straightener

      

12" x .07" Pennsylvania Industries #MSS129V, 975 IPM, 9 straightening rolls, 1.5" rolls, upper & lower pinch rolls motorized, #159366

      

12" x .078" Cooper Weymouth #12SPS, parts straightener, 7 rolls, 48" pass line, #28448

      

12" x .080" Coe Press Equipment#CPPS-225-12, 7-roll straightener,125 FPM,3 HP,1996,#68871

      

12" x .09" Cooper Weymouth, flat & shape straightener, 7-rolls, variable speed

     

12" x .09" Rapid-Air #SCX-12, flat & shape straightener, 9-rolls, loop Control, variable speed

      

12" x .093" Littell #412-HRP, flat & shape straightener, 5-rolls, entry pinch rolls

      

12" x .093" Littell #412-HRP, powered stock straightener, 5-roll, entry pinch rolls, coil guides, manual roll adjustment, loop control

      

12" x .105" Littell #312-7PDL, motorized straightener, 7 straightening rolls, variable speed

      

12" x .125" CWP #12B, flat & shape straightener, 7-rolls, variable speed

      

12" x .125" Perfecto #22-12-7, powered flat & shape straightener, 7-rolls, variable speed

     

12" x .125" U.S. Motors Tool plain straightener, 7 straightening rolls

     

12" x .156" Littell #412-7PDL, motorized straightener, 7 straightening rolls

      

12" x .16" Regal #250-55-12, powered stock straightener, 7 rolls, air lift entry/exit pinch rolls, variable speed motor, 1978

      

12" x .16" Regal, powered stock straightener, 7-roll, air lift entry/exit pinch rolls, variable speed motors, 1978

     

15" x .025"-.180" PRE #Primo-PRHD-15-DC3-J, straightener, 11-roll, 2.75"dia., 1999

      

15" x .08" Rowe #A15, motorized straightener, 7 straightening rolls, 25-75 FPM (2 available)

     

15" x .11" Durant #MD-15, motorized straightener, 7 straightening rolls, 22-60 FPM

      

15" x .11" Press Room Equipment #PR-MD-15-DC-IC, straightener, 7-rolls, 2" dia., 100 FPM, pneumatically actuated pinch rolls, 1997, #160662

      

15" x .125" Rowe #B-15, flat & shape straightener, 7-rolls, entry/exit pinch rolls, 2 HP

     

15" x .125" Dynamic #1515RL, mech/air operated straightener & feeder, 900" feed rate per minute, 100 SPM, s/n 1449, 1984

    

15" x .175" Rowe #C20-C8000J, motorized coil straightener, #12416

     

15" x .30"-.125" Rowe #S15, 7-straighting entry-exit rolls,V/S,bi-direction/input calib

    

15-1/2" Bruderer #18400-500.1, 15-1/2"wide 19 roll precision, serial #40117, #1217

   

18" x .020"-.125" Littell #418-7PD, coil straightener,3 HP,pneu.pinch rolls,#7581P

      

18" x .05" Littell #318-7PDL, coil straightener, 3 over 4, 2-1/4" dia.rolls, 2 HP, #25650

     

18" x .050" Littell #418-5PD, powered straightener,5-rolls,loop ctrl arm,1954,#10423

      

18" x .09" CWP #CWP18B, 25 FPM, Adjustable Material Entry Guide Rolls, #9079HP

     

18" x .093" Littell #318-7PDL, motorized straightener, 7 straightening rolls, variable speed, 1975

      

18" x .093" Littell #418-SPD, flat & shape straightener, 5-rolls, entry pinch rolls, variable speed

      

18" x .125" American Steel Line, straightener, 9-roll, entry & exit pinch rolls, loop Control, variable speed frequency drive

      

18" x .125" Cooper Weymouth #C, flat & shape straightener, 7-rolls

      

18" x .125" Littell #418-7PDL, powered straightener,7 rolls,V/S drive,edge guides

      

18" x .125" Perfecto #2-1/2-18-9STR, stock straigthener, 9-roll, 2-1/2" roll diameter, entry & exit pinch rolls, variable speed, dancer arm

      

18" x .125" Perfecto #2-1/2-18-9STR, flat & shape straightener, 9-rolls, dancer arm, variable speed

      

18" x .156" Air Feeds #3X7, straightener,3"roll dia.,30-90 FPM,5 HP,1999,#71990

      

18" x .187" Cooper-Weymouth #18C, (7) 2-3/4" straightening rolls, 2 pinch rolls, 1986, #157501

      

18" x .187" Cooper Weymouth #18C, straightener,7 straightening rolls,2 pinch rolls,loop control,linear counter,1984,#157609

    

18" Cooper Weymouth #18B, flat & shape straightener, 7 rolls

     

19.7" x .020-.095" PA Industries #SS-197D, motorized straightener, 7-roll, 1999, #11236

      

20" x .065" Rowe #R-20, flat & shape straightener, 7-rolls, entry & exit pinch rolls

      

20" x .065" Rowe #R-20TC, flat & shape straightener, 7-rolls, entry/exit pinch rolls

      

20" x .07" Benchmaster #920, coil straightener, 3 over 4, 2-3/16" dia rolls, 1 HP, #28453

      

20" x .085" Egan #S25-1620, straightener, 15 roll, 2" dia., entry & exit pinch, #11220

      

20" x .09" Durant, flat & shape straightener, 7-rolls, entry & exit pinch rolls

      

20" x .109" CWP #20SPS, motorized parts straightener, 17 straightening rolls

      

20" x .17" Rowe #C20, motorized straightener, 7 straighteing rolls, 35-100 FPM

      

20" x .19" Rowe #C5, 7-rolls, 4" diameter, entry/exit pinch rolls, adjustable roller guides, spare head only, #9836

      

20" x .25" Rowe #C8-20, motorized straightener, 5 straightening rolls, refurbished

     

24" x .05" Rowe #R-24TC, powered straightener, (7) 2" straightening rolls, (2) sets of 2" pinch rolls, 1.5 HP, 35-100 FPM

      

24" x .06" Dallas #81733, flat & shape straightener, 5-rolls, cascade rolls, variable speed

      

24" x .075" Dallas #PTS-567, flat & shape straightener, 5-rolls, entry pinch rolls

      

24" x .078" Littell #424-7PDL, 7-roll, powered coil straightener, 4" diameter entry pinch rolls, #13905

     

24" x .125" CWP #24C, 7-roll, 2.75" diameter entry & exit pinch rolls, variable speed, powered coil straightener, #13904

     

24" x .125" Littell #626-5PD, motorized straightener, 5 rolls, 18-108 FPM, 1977

      

24" x .17" Perfecto, coil straightener, 7-rolls, 4" diameter rolls, powered entry/exit pinch, powered roll adj., cluster geared drive, AC variable speed drive

      

24" x .21" Pro-Eco #FSG-5-5-25, 5 roll straightener, 5" roll diameter, entry & exit pinch rolls, entry guide rolls, hydraulic peeler, 1981

      

24" x 5/23" Niagara #350-7-24, straightener

     

24" x .25" Herr sheet & strip flattener, 30" roll face, 5 rolls, 6" dia work rolls, 15 HP

      

24" American Steel Line, leveler, initial guide roll, pinch roll, 3 stand w/ manual pinch, exit pinch roll, sonic loop eye, #82796

    

24" Perfecto stock straigthener, 7-roll design, 4" roll diameter, powered entry & exit pinch rolls, powered roll adjustment, AC variable speed motor

      

26" x .187" Metform, flat & shape straightener, 5-rolls, 4" dia.rolls, casacde, 1988

      

28" x .125" Gary #4600-24, straigthener, 5 roll, 3" diameter rolls, entry pinch rolls, pendant for jogging

      

28" x .125" Gary #4600-24, flat & shape straightener, 5-rolls, 3" diameter, entry pinch roll

      

30" x .012" Littell #432-7PDS, flat & shape stock straightener, 5-rolls, 150 FPM, 1991

      

30" x .048" Cooper Weymouth #30-B, flat & shape straightener, 7-rolls

     

30" x .048" CWP #30B, 7-roll straightener, entry/exit pinch rolls, #14050J

      

30" x .065" Rowe #B-30, 7-roll straightener, entry & exit power pinch rolls

      

30" x .07" Press Room Equipment #PMS-3025-7DC, flat & shape straightener, 7-rolls, cascade rolls, 1996

      

30" x .071" Herr Voss Precision flat & shape straightener, 17-rolls, 1.5" roll diameter

      

30" x .093" Rowe, flat & shape straightener, 7-rolls, entry & exit pinch rolls w/air lift

      

30" x .125" Littell #636-5PD, motorized straightener, 5 straightening rolls, 18-108 FPM

      

30" x .15" Rowe #B-30, 7-roll straightener, 15 deg incline, peeler, #14039JB

      

30" x .15" Rowe #C-30, flat & shape straightener, 7-rolls, entry & exit pinch rolls, variable speed

     

30" x .15" Rowe #C6-30, flat & shape straightener, 7-rolls, loop Control, 4" dia roll, variable speed

      

30" x .150" Rowe #T-30, straightener, 7 rolls, 2 entry/exit pinch, manual pressure adjustment, 1963

      

30" x .19" Rowe #C5-30, straightener, 7-rolls, entry & exit pinch rolls

    

30" x .2" Regal #350-CSF30-HD, straightener, 80 FPM, air clutch & brake, #8331JVHP

      

36" x .032" Littell #436-5PDL, coil straightener, 3 HP, up to 80 FPM, #8607P

      

36" x .050" Littell #438-HVS-7PPL, coil straightener & air shear, 5 HP, #7681HP

      

36" x .090" Durant straightener, 7-rolls, 2 pinch, 4 coil breaker rolls, #13927B

     

36" x .1" American Steel Line #100-3-11, flat & shape straightener, 7-rolls, variable speed, 1987

      

36" x .25" Perfecto #S283607, flat & shape straightener, 7-rolls, auto lube, peeler, 1985

      

36" Bradbury #RS35-6-36, 5-roll powered straightener,cascade rolls,#65251

      

36" Egan Presspartner #S20-836, powered 5 roll straightener, entry guide, pinch roll, 5 stand leveling

    

36" Egan Presspartner #S20-836, powered 5-roll straightener, Sonic loop eye, #11276

      

38" BHP, also 16", stock #10673

   

40" x .11" Rowe #C3-40, 7-roll stock straightner, 3.5" roll diameter, 5 HP, 1980, #13097T

      

42" x .060" Niagara #200-7-42, straightener, 7-roll, entry & exit pinch, fwd/rev. jog

      

42" x .062" Littell, flat & shape straightener, 7-rolls, entry pinch rolls, variable speed

      

42" x .090" Coe Press Equipment#CPPS-305-42, power straightener, 42" width, 7.3" dia. rolls,15 HP

      

42" x .110" Rowe #C-40, 7 rolls, pinch rolls, low price, #10280

   

48" x .018" Littell #452D-16PDS, leveler/straightener, 5 HP, back up rolls, 1979, #7721HP

      

48" x .025" Littell #438-7PDS-S60, 7-roll powered straightner, 1959, #12309J

     

48" x .025" Littell #650-7PD, 7-roll straightner, 0-1200 IPM, 1959, #12268J

     

48" x .03" Stirlich, straightener, 7-rolls, 3" dia., powered entry pinch rolls, (2) pneumatic cylinders, 2000

     

48" x .03" Strilich / Coil Handling System #PS-3X9, straightener, 9 rolls, VFD, #67553

      

48" x .048" Bradbury #RS35, straightener, 5 roll, 3"dia., pendant control, 1991

     

48" x .06" Engel, straightener/slitter, 8 roll straightener, entry & exit pinch rolls, entry cascade table, 1970' s

     

48" x .075" Jaybird #PS7-4805S, 7-roll straightener,entry & exit pinch rolls,loop switch,forward & reverse jog,good,#13629J

      

48" x .075" Jaybird #PS7-4805S, 7-roll straightener, 3"dia.rolls, good condition

      

48" Egan #V30-648, press partner straightener, serial #3447, #71250

      

50" x .085" Rowe #C-50, straightener, 50" width, 100 FPM, air clutch & brake, 7.5 HP, #8687HP

      

50" x .085" Rowe #C3-50, coil straightener,100 FPM,7.5 HP,air clutch & brake,pneu.pinch rolls,#8668P

      

50" x .09" Proma, flat & shape straightener, 11-rolls, 4" dia roll, cascade rolls, 1986

      

54" x .042" Regal #330-SS-54-116, powered straightener, 2 over 3 rolls, vari-speed drive

      

54" x .156" Regal #SPS-187-54-TBU-UJD, Sheet Straightener, 35 FPM, #9046JVHP

     

60" x .075" Gary, straightener, 64" roll face, 7 work rolls, 4" work roll diameter, AC motor

      

60" x .105" Red Bud, straightener/double stub edge trimmer, peeler table, 7-rolls, hydraulic drive, 1985

      

72" x .01" Rowe, straightener, entry pinch rolls

      

72" x .06" Rowe #SFDC-6-72, flat & shape straightener, 7-rolls, entry & exit rolls

      

72" x .067" Rowe #C6-72, 7-rolls, pinch rolls, pwrd straightener, 1986, #10765

      

72" x .105" Rowe, straightener, 5-rolls, entry & exit pinch rolls, entry coil breaker

      

72" x .156" Regal #SPS-187-72-TRIL1D, Sheet Straightener, 35-100 FPM, #9047JVHP

     

Blaw-Knox / Medart #6SPOMVCA-11, 11 roll single plane shape straightener,1978,#65937

      

Durant #MD-10, 7-roll straightener

     

Wenco, 4"-30", wide straighteners, has over 25 in stock

  

Back to category listings.

 = photo available     = spec sheet available     = PDF available     = request quote from seller     = video available     = Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

Surplus Record All Rights Reserved. https://surplusrecord.com Tel: 312-372-9077 Customer Service Mobile Apps Advertise