Browse: Machinery Electrical

Machinery & Equipment >

Welding Manipulators,Positioners & Turning Rolls >

Welding Positioners

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS:
WELDING POSITIONERS

Mitrowski for New & Used Welding Equipment

There are 199 listings in this category
Update: Sat, Nov 17, 2018 00:33:28

Advanced Search

Sort by Manufacturer
Sort by Location
Sort New vs. Used
Sort by Date Added

Original Sort

100 lb. MAC #PS-1F-5-A, 2-Axis welding positioner, welding chucks shown optional Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

132 lb. Koike Aronson #LD60N-Tig-13, welding positioner, 13" table, 120 V., single phase, #7499 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

200 lb. MBC, tabletop positioner, 12" table, variable speed, foot pedal Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

250 lb. Profax, welding positioner Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

300 lb. CobraTurn digital turntable, 3-jaw chuck, Argon gas purge, foot pedal 120 V. Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

300 lb. MAC #PS-2F, 90 deg.tilt, 500 amp.weld ground, optional welding chucks shown Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

500 lb. Profax #WP-500 Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

500 lb. Profax, with 12" pipe chuck, 120 V., foot pedal, variable speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

500 lb. #PS-3F, benchtop positioner, 90°tilt, 500 amp weld ground, opt.weld.chks shown Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

750 lb. Pandjiris #7.5MV, positioner, 42" round table, manual tilt, easy to operate Camera icon

Naab Sales Corporation, New Hope, MN 952-933-6755 (Email: john@naabsales.com) J.Van Heuveln

750 lb. Welding Positioner, motor driven power headstock, roller base, Tag #15431 Camera icon

Yeoman Machinery Corp, Elkhart, IN 574-295-6161 (Email: yeomanmachinery@gmail.com) Robert Yeoman

800 lb. All-Fab #804, 135°tilt, 20" T-slot. table, optional weld.chuck, outboard support shown Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

1000 lb. All-Fab #PB1005, pipe rotator, MT16 chuck, on/off foot control Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

1000 lb. Cayuga #1K44HT, 30" vari-speed welding positioner, manual tilt, 3/4 HP, #66209 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

1000 lb. Profax #WP-1000, 24.5" table, 29" center line, 2 RPM, 115 V.input Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

1000 lb. Profax, welding positioner Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

1000 lb. Ransome #10P, welding positioner, #6075 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

1000 lb. Ransome #10P, welding positioner, Powered Tilt and Rotation, foot pedal, 1969, #156946 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

1000 lb. Ransome #10P, 135°tilt, 30" table diameter, vari-speed, power elevation, 1969 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

1000 lb. Ransome #10P-A, 135°tilt, 34" table diameter, vari-speed, power elevation, 1981 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

1000 lb. Ransome #10PA, welding positioner, Powered Tilt and Rotation, 230/460 V., 3-Phase, foot pedal, 1981, #156949 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

1500 lb. All-Fab #1504, 135 degree tilt, 24" T-slot. table, optional welding chucks shown Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

1500 lb. MAC #POK-07, 90°power tilt, 24" T-slot. table, 800 amp weld ground, opt.weld.chks shown Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

1500 lb. Pandjiris #15-4-AB, power tilt & rotation, adjustable height base Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

2000 lb. Aronson welding positioner w/chuck, power tilt & rotate, adj.base Camera icon

Joe Fuller, LLC, Houston, TX 979-277-8343 (Email: joe@joefuller.com) Joe Fuller

2000 lb. Koike Aronson #HD20A-PTVR2, power tilt, 4-post manual hght adjust, 1999, #6110 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

2000 lb. P & H, power rotation & power tilt, 35" diameter table, pendant control, #43762 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

2000 lb. Pipe Bully #PB2005, pipe rotator, MT20 chuck, on/off foot control Camera icon

All-Fab Corp., Allegan, MI 269-673-6572 (Email: sales@allfabcorp.com) Sales Dept.

2500 lb. Aronson #HD-25 Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

2500 lb. Aronson #HD-25, welding positioner, power rotation/tilt, 30" x 630" table, #6956P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

2500 lb. Aronson #HD25, welding positioner, #3066 Spec Sheet

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

2500 lb. Aronson #HD25A, welding positioner Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

2500 lb. Aronson #HD25A/36RP, 30" x 30" table, S38390 Camera icon

Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: kathy@perfectionmachinery.com) Dept. Sales

2500 lb. Aronson #HD25B, welding positioner, 36" x 36" table, power tilt, 2 HP, 1979, #70104 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

2500 lb. Aronson #SHD25A, welding positioner, 30" x 30" T-slot table, pendant control, #70105 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

2500 lb. Aronson Skyhook, 360°tilt & rotate, 38" table, 18.5" thru hole, low price, '86 Camera icon

Great American Eqpt Co, Cincinnati, OH 513-771-2111 (Email: sales@gaec.com) Sales Dept.

2500 lb. Aronson #TS-2, tailstock, 30" x 30" table, 1983 Camera icon

Altman Machinery Co, Chicago, IL 773-247-4343 (Email: steve@altmanmachinery.com) Howard /Steve

2500 lb. Cullen-Friestedt #25, welding positioner, s/n #1032, #6930P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

2500 lb. Koike Aronson #HD25A, welding positioner, 1997, #3065 Camera icon

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

2500 lb. Preston-Eastin #FT-25, 36" diameter table, vari-speed, unused, 2013 Camera icon

Grand Marshall Machinery Inc, Hauppauge, NY 917-576-2510 (Email: sales@grandmarshallmachinery.com) Larry/ Paul

2500 lb. Ransome #25-P, welding positioner, 30" table, power rotation/tilt, #8126 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

2500 lb. Ransome #25-P, 40" table, 40" work height, 140°tilt, vari-speed, remote pedal, '64 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

2500 LB. Ransome #25P, 32" diameter table, power tilt & rotate, vari-speed, 1977, #18564

Raco Industrial Corp, Des Plaines, IL 847-298-8600 (Email: sales@raco.com) Jack Boecher

2500 lb. Worthington #25P, 48" Diameter, 16" 3 Jaw Chuck, #4504 Camera icon

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

2500 lb. Worthington #25P, 32" x 32" Square Top, #4503 Camera icon

Wheeler Machinery Sales, Pomona, CA 888-589-6721 (Email: sales@wheelermachinery.com) Dan Wheeler

3000 lb. Aronson #GE-30, power elevated positioner

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

3000 lb. Aronson #HD-30-6, power tilt & rotate, 2 ea nice clean machine Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

3000 lb. Aronson #HD30A, welding positioner, adjustable height, 19" lathe chuck Camera icon

Gulf Coast Machinery LLC, Foley, AL 251-943-0048 (Email: don4machines@gmail.com) Don Bentley

3000 lb. Aronson #RAB30VS/VS, 36" x 36" table, vari-speed, 135°power forward tilt, S38389 Camera icon

Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: kathy@perfectionmachinery.com) Dept. Sales

3000 lb. Bulldog pipe welding positioiner, 20" pipe chuck, foot pedal, 120 V., made in USA Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

3000 lb. Joe Fuller LLC welding positioner, power tilt & rotate, adj.base, 110V., new Camera icon

Joe Fuller, LLC, Houston, TX 979-277-8343 (Email: joe@joefuller.com) Joe Fuller

3000 lb. Pandjiris #30-6, variable speed, new, one year warranty Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

3000 lb. Pandjiris #30-6-FB-POS-T, welding positioner, 30" table, 1 HP, 2012, #8210P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

3000 lb. Pandjiris welding positioner, 36" table diameter, vari-speed drive, #67763 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

3000 lb. Preston Eastin #PA-30-KEC, positioner, 110 V., new stock 15 ea. Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

3000 lb. Preston Eastin, welding positioner, refurbished, power tilt, power rotation, adj.base Camera icon

Joe Fuller, LLC, Houston, TX 979-277-8343 (Email: joe@joefuller.com) Joe Fuller

4000 lb. Preston-Eastin #RHS-60-SRA, headstock, 54" table, 2002, S38510 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

4000 lb. Ransome #40P, 36" table, 0.031-1.23 RPM, power rot. & tilt, manual ht. adj., #7588P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

4000 lb. Ransome positioner @ 12" COG, variable speed, very clean machine Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

4000 lb. Ransome, never put into service, like new, 1998 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

4500 lb. Aronson #GE-45B, power tilt, rotate & elev, V/S rotation, 48" slotted face plate Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

4500 lb. Aronson geared elevation, 460 V. input, variable speed rotation Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

4500 lb. Pandjiris #45-12 positioner, vari-speed rotation, hand pendant, 460 V.

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

4500 lb. Pandjiris #45-12VPL, power. elevated positioner, constant speed, 12" CG, hand pendant Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

4500 lb. Preston-Eastin #PA-45-12, welding positioned, 4-jaw 32" chuck

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

4500 lb. Preston-Eastin, Koike, (3) units Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

5000 lb. Ransome #50P-A, 42" table, 140°tilt, 42" -64" height, vari-speed, slotted, 1980 Camera icon

Turner Industries Inc, Grand Rapids, MI 616-949-5910 (Email: sales@turnerind.com) David Hietikko

5000 lb. Ransome #50P-A, welding positioner, 42" table, pendant control, power tilt, #70643 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

5000 lb. Ransome, head & tailstock positioners, 24" pipe gripper chucks, adj.height Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

5000 lb. Weix #TestfixT, horizontal double end welding positioner, 66" swing, 1999, #4447A Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

5400 lb. LJ Welding #30P-200, with 30" Pipe chuck, foot pedal, digital readout (2 available) Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

6000 lb. Aronson #GE-60A, power tilt, rotate & elev., V/S rotation, 48" slotted face plate Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

6000 lb. Aronson #HD60A, 48" x 48" table, vari-speed, power tilt, pendant control, 1984, #29094 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

6000 lb. Aronson #HD60A, tilt/rotate, 48" x 48" table, adj.base, Pendant, v-speed, #39359 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

6000 lb. Aronson #HD60B-3, 5 HP rotation, 3 HP tilt, 42" round table, power table tilt, #016349 Camera icon

Sominn Machinery Sales, Dodge Center, MN 800-770-5638 (Email: jj@sominn.com) J.J. Francis

6000 lb. P & H #6A, 46" x 46" table, vari-speed, 135°table tilt, pendant control, #26200 Camera icon

Kempler Industries Inc, Elk Grove Village, IL 847-242-8982 (Email: sales@kempler.com) Sales Dept.

6000 lb. Pandjiris #60-12, welding positioner, 50" fixed hght, 4-Jaw 36" chuck on 48" tbl Camera icon

Gulf Coast Machinery LLC, Foley, AL 251-943-0048 (Email: don4machines@gmail.com) Don Bentley

6000 lb. Pandjiris #60-12-AB, 48" x 48" table, variable speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

6000 lb. Ransome #60, welding positioner, 46" x 46" table, 5 HP, power tilt, #68452 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

6000 lb. Ransome #60P, rotate & tilt welding positioner, heavy duty Camera icon

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

6000 lb. Ransome, 135°tilt, 45" x 45" table w/slots, 52" high, pendant control, power tilt/rotate Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

6000 lb. Ransome, 135°tilt, 45" x 45" table w/slots, 52" high, pendant control, power tilt/rotate Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

6600 lb. Gentec #PT3000, 39" diameter platen, 0-135°power tilt, 43" table flat, pendant, s/n #Z08904 Camera icon

Alternative Machine Tool Inc, Dousman, WI 262-965-3655 (Email: scott@alternativemachinetool.com) Scott Buth

6600 lb. Koike Aronson #MD-3000, welding positioner, powered forward tilt, 1992

Used Solutions Inc, Algonquin, IL 815-759-5000 (Email: markm@usedsolutions.com) Mark Mammen

6600 lb. Koike Aronson #MD3000, 135°tilt, 40" x 40" table, 0.56 RPM, pendant control Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

7000 lb. Vanguard #HB-30, welding positioner, 2006, #3063 Camera icon

Kaste Industrial Machine Sale, Enfield, CT 860-623-5700 (Email: debbie@kaste.com) Brad

7500 lb. Worthington #75, welding positioner, 66" table, 440 V., 3 phase, #6078 Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

9000 lb. Aronson #GE-90, gear elevated, power lift, tilt & rotation, welding positioner

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

9000 lb. Aronson #GE90B, geared elevation welding positioner, 48" x 48" table, #68662 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

9000 lb. Koike Aronson #GE90VF, 48" x 48" table, geared elevation, V/S, 2010, S36425 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

10000 lb. Aronson #HD-100 CS, 230 V.input, constant speed rotation, 48" x 48" table, 1963 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

10000 lb. Aronson #HD100, 48" x 48" table, power tilt & rotate, vari-speed, adj.height, 1955, #27088 Camera icon

C.W. Wood Machinery Inc, Cincinnati, OH 800-745-6008 (Email: info@cwwood.com) Sales Dept.

10000 lb. Aronson #HD100A, welding positioner, 52" diameter table, SCR drive, #65294 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

10000 lb. Bode #100/VP, variable speed, 60" round T-slotted table, pendant control, excellent

Estes Machinery Co, Chicago, IL 312-543-6772 (Email: Estesmachinery@aol.com) Peter Estes

10000 lb. LJ Welding positioner #45P-500, 50" pipe gripper chuck, adj hght, foot pedal, 480V. Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

10000 lb. Mark 5 6-517, welding positioner, powered tilt & rotation, variable speed, #153941 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

10000 lb. P & H #WP-10, 48" x 48" table, 135 deg.tilt, 60" table.hgt., pendant, constant power.rot. Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

10000 lb. P & H #WP-10A, welding positioner, 12" CG, pendant control, V/S rotation, rebuilt Camera icon

D & D Industries Inc, Monclova, OH 419-866-6894 (Email: Sales@danddindustries.com) Dave Zerbey

10000 lb. Pandjiris #100-12, 54" x 54" table, vari-speed, power tilt, pendant control, 2013, #29093 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

10000 lb. Prestin Eastin #PA100-HD, vari-speed, 3 HP DC, manual elevation, new

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

10000 lb. Ransome #10000, flr turntable, 60" diameter surface, 24.5" tall, 460 V., S/N 43471, 2007 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

10000 lb. Ransome #100E, welding positioner, power tilt, pendant control, 1973, #66498 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

10000 lb. Ransome #100P, 60" diameter table, vari-speed rotation, pendant, 1978, #28461 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

10000 lb. Ransome #100P, 60" table, vari speed, power tilt, pendant, very clean Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

10000 lb. Triofab drop center tilt & rotate welding positioner, pendant controls, hydraulic positioning of work holding slide Camera icon

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

10000 lb. Triofab drop center tilt & rotate welding positioner, pendant controls, hydraulic positioning of work holding slide Camera icon

Harris Machine Tools, Inc., Houston, TX 713-462-5800 (Email: sales@harrismachinetools.com) Sales Dept.

10500 lb. Irco #1PE12, welding positioner, 48" x 48" table, hydraulic power tilt, #63875 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

11240 lb. Pemamek #Pema-5000 CR-2, drop center positioner, very little use, 1995 Camera icon

Antenen Robotics, West Chester, OH 513-205-3318 (Email: steve@antenen.com) Steve Antenen

12000 lb. Aronson #FT1-205, welding positioner, 86" table, #6881P Camera icon

Industrial Assets Machinery, Painesville, OH 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

12000 lb. P & H #WP12, welding positioner, power tilt & rotate, pendant control, #64118 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

12000 lb. Pandjiris #120VPL, Positioner, 54x54 Table, vertical power lift, 2006 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

12000 lb. Ransome #120-P, positioner, 60" table, variable speed, 1993 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

12000 lb. Ransome #120-P, welding positioner, 60" faceplate & chuck, 1992 Camera icon

Mullin Machinery, Farmingdale, NJ 732-566-1211 (Email: mullinmach@msn.com) Marcus Mullin

14000 lb. Cullen-Friestadt #140, 135°power tilt, power rotation, 54" x 54" table, pendant control Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

16000 lb. Aronson #HD-160, 54" table, 460 volt, 1957 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

16000 lb. Aronson #HD-160 VFD, late model nice, power tilt, V/S rotation, chuck extra Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

16000 lb. Aronson #HD-160-CS, 480 V. Constant speed tilt and rotation Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

16000 lb. Koike Ransome #6H-PE, power elevation, 48" table 6" thru-hole, 2012 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

16000 lb. Ransome pipe positioner, 50" pipe gripper chuck, powered hght adj, for sale or rental Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

16000 lb. Worthington Ransome vertical headstock positioner, pendant control, 90°fixed position table, 48" x 48" square T-slotted r/tbl Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

18000 lb. Aronson #GE180A, welding positioner, geared elevation, 1984, #157375 Camera icon

Machinery Values Inc, Harrison, NJ 973-497-7600 (Email: presses@machineryvalues.com) Rick Lazarus

18000 lb. Koike Aronson #GE-180, gear elevated, power tilt, vari-spd rotation, clean, 2012 Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

18300 lb. Aronson #DCG180, drop center gravity welding positioner, 48" x 48" table, 7.5 HP Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

20000 lb. Aronson #HS/TS 20 headstock/tailstock rating 20000 lb.rotation load torque Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

20000 lb. Aronson #HTS-20GE HS/TS, 36" tables, 8" hole, pendant control, geared elev., '76, #25622 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

20000 lb. Aronson #HTS20GE, 36" table diameter, 52" geared elev., const spd, pendant, '82, #38868 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

20000 lb. Cullen-Friestedt #200, power tilt & rotate, V/S rotation, 48" round table, 52" high Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

20000 lb. Koike Aronson #HTS20VF, head & tail HS10VF/TS10, V/S, 48" sq. table, '06, #43745 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

20000 lb. Pandjiris #HS-200, headstock/tailstock welding positioner, 48" x 48" table, #65178 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

20000 lb. Ransome #200-P, 460 V., variable speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

24000 lb. Aronson #HD240A, 70" x 70", 110V hand held controls, .006 to .6 RPM pos.speeds Camera icon

Southern Fabricating Machinery Sales, Lithia, FL 813-444-4555 (Email: dan@southernfabsales.com) Dan McCurdy

24000 lb. Aronson #HD240A, welding positioner, 12", 115 V.Remote Pendant Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

24000 lb. Koike Aronson #HD240VF, 54" x 54" table adjust.height, 460 V., 2012 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

24000 lb. Preston-Eastin #PA240HD, 12" CG, 54" table, hand pendant, grippers, 7-1/2 HP Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

24000 lb. Worthington #240P, 135°power tilt, V/S rotation, 60x60" table w/slots, pendant control Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

25000 lb. Aronson #GE-250, 60" x 84" table., power tilt/elevation, pendant control, reb.'17, #10247 Camera icon

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

25000 lb. Aronson #GE-250CS, vari-speed, 60" sq. table, geared elevation, s/n #8173, #25620 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

25000 lb. Ransome #250P-A, tilt & rotate, heavy duty, 60" x 60" table, 1980, #45019 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

25000 lb. Teledyne Readco #UPC-250, 66" round table, power tilt, S/N 105471, 1976 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

25000 lb. Vanguard #HB100, 80" table, 220 V.input, used, 2007 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

30000 lb. Ransome #300-P, 72" round table, 460 V., variable speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

32000 lb. Aronson #HD-240, 135°tilt, V/S rotation, 54" x 54" sq.table w/slots, adj.height Camera icon

North American Machy Sales, Philadelphia, PA 215-332-3200 (Email: sales@northamericanmachinery.net) Hyman/Putney

32000 lb. Aronson #HTS-32GE HS/TS, 36" diameter tables, 8" hole, pendant control, geared elev, #25621 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

32000 lb. Koike #HS16VF-TS16 hdstk tailstock positioner, fixed base, 54" x 54" table, '12, #27256 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

40000 lb. Aronson #G-400, 96" round table, hand pendant Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

40000 lb. Aronson #G400, 84" x 84" T-slot table, 12" thru hole, vari-speed rot., 1975, #23613 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

40000 lb. LJ #TRN20-100, floor turntable, low profile 16" tall, 48" table w/6 T-slots Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

40000 lb. P & H #WP40, welding positioner, 84" x 84" table, twin ball screw, rectangular elevating column design, good, 1970' s

Hadanich Machine Mfg., Inc., Washington, PA 724-225-2440 (Email: hadanich@pulsenet.com) George Hadanich

40000 lb. Pandjiris #HTS400, non rotate, vert hdstock & tailstock, 3-116 ipm, #25914 Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

40000 lb. Ransome #400P, 84" x 84" table, 135 deg.tilt, CCW, 480 V., s/n #51324, #9793 Camera icon

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

40000 lb. Ransome #400-PA, low profile, 84" round table, 460 V.input, vari-speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

40000 lb. Ransome #8H headstock, hyd power rotation, 84" x 84" table, 65" center of table Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

40000 lb. Readco welding positioner, 84x84" table, 460 V.input, power tilt, V/S rotation Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

40000 lb. Weldwire Co. #WWFT-40, 480 V., 72" table, vari-speed, 713-943-8032 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

40000 lb. Worthington #400P, 360°power rot., 135°tilt, 84" x 84" table, power table elev. Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

50000 lb. Aronson #FB-500, welding positioner, power tilt, power rotation

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

50000 lb. Aronson #G500, 84" x 84" T-slot table, 12" thru hole, vari-speed rot., 1966, #23612 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

50000 lb. K.N. Aronson #GE-500, gear elevated welding positioner, power tilt, rotation, lift Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

50000 lb. Aronson #GE-500, welding positioner, pendant control, 84" x 84" table, #67857 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

50000 lb. Aronson #GE-500, gear elevated, V/S on both tilt & rotation, super clean Camera icon

Joe Fuller, LLC, Houston, TX 979-277-8343 (Email: joe@joefuller.com) Joe Fuller

50000 lb. Aronson #GE500EDC, 84" x 84" Table, geared elevation, vari-speed, #27176 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

50000 lb. Aronson #GE500FBCS, 84" x 84" table with 12" thru hole, geared elevation, #45643 Camera icon

Liberty Machinery Co, Lincolnshire, IL 847-276-2761 (Email: sales@libertymachinery.com) Peter Sonneborn

50000 lb. Aronson #HD-500VFD, 84" square table 11-7/8" diameter hollow spindle

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

50000 lb. Aronson #HD500, welding positioner, 84" x 84" T-slot table, #28287 Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

50000 lb. Aronson #HD500, welding positioner, 84" x 84" T-slot table, #28288 Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

50000 lb. Koike Aronson #HD-500VF, adjustable height base, 480 volt, VFD variable speed Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

60000 lb. Aronson #G600 CS, 135 deg.tilt, 360 deg.rotate, 8' x8' table, 480 V., #9794 Camera icon

Wisconsin Metalworking Machinery, Waukesha, WI 262-548-6080 (Email: chuck@wismet.com) J.R. Kraemer

60000 lb. Pandjiris #600-12, 96" x 96" table, adjustable height, variable speed, 1992 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

70000 lb. Koike Aronson #HD-700, nice, 2014 Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

75000 lb. Aronson #FT75B, floor turn table, 84" round table, 30" tall, 6" I-Beam legs, 1970 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

78500 lb. Esab Pema #35000F, 120" diameter table, V/S drive, hydraulic tilt & rotation, #26741 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

78500 lb. Esab #Pema-3500F, welding positioner, 120" table, 1993, #7550XJVLester Camera icon

Industrial Assets Machinery, Huntington Park, CA 323-587-1887 (Email: rick@iamachinery.com) Rick Kruger

80000 lb. Aronson #HS/TS 80 headstock/tailstock rating 80000 lb.rating total Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

80000 lb. Aronson #HS/TS80, headstock / tailstock, 115 V., remote pendant, 84" x 84" table, 10 HP Camera icon

Aleco Machinery Sales, Milwaukee, WI 414-264-5848 (Email: alex@alecomachinery.com) Alex Hawley

85000 lb. Aronson #GE-850, welding positioner w/geared elevation, 96" x 96" table, #16821 Camera icon

F P Miller Company, Jackson, MI 517-787-3100 (Email: fpmiller@fpmiller.com) Craig L. Ward

85000 lb. Koike Aronson #G-850-VF, 460 V. input, 3-years old, for sale or rental Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

85000 lb. Koike Aronson #G850VF, 460 V.input, variable VFD table speed, 2012 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

88000 lb. Irizar #CWP-40, welding positioner, Janda control, auto feed, 2015, #68601 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

90000 lb. Aronson #HTS50, Head and Tail stock Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

95000 lb. Aronson #AB-950-6, 460 V.input, vari-speed rotation, power tilt, sales or rentals Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

120000 lb. Aronson #G1200, 460 V.input, vari-speed rotation, power tilt, 120" x 120" Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

120000 lb. Aronson #HD-1200 Camera icon

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

120000 lb. Aronson #RS10GE/TS10GE, weld positioner w/headstock & tailstock, #10314 Camera icon

Vander Ziel Machinery Sales, Alto, MI 616-868-1111 (Email: Sales@vanderzielmachinery.com) Steve Vander Ziel

120000 lb. Brantford #LP60T, welding positioner, 113" table diameter w(6) t-slots, pendant controls, #JH048 Camera icon

Mohawk Machinery Inc, Cincinnati, OH 513-771-1952 (Email: secord@mohawkmachinery.com) Mr.Secord

120000 lb. Ransome #1200-P, welding positioner, vari-speed, dynamic braking, #64866 Camera icon

Yoder Machinery Sales, Holland, OH 800-622-4463 (Email: surplusrecord@yodermachinery.com) Sales

120000 lb. Weldwire floor turntable, 72" table, 5 HP V/S, 480 V.input, new, sales & rentals Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

150000 lb. Jennings, 240" table, 75 HP tilt, 40 HP rotation, 13' OA height, #23725 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

160000 lb. Aronson head tailstock positioners #HS-80 TS-80, adj.hght 84x84 tables, 460V. Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

160000 lb. Aronson #HS80/TS80, headstock/tailstock, 54" table, 118" center hght, S38377 Camera icon

Perfection Industrial Sales, Elk Grove Village, IL 847-427-3333 (Email: kathy@perfectionmachinery.com) Dept. Sales

160000 lb. Aronson, hd. & tailstock, 84" x 84" table, HS-80 & TS-80, vari-speed rotation, 2002 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

200000 lb. Pandjiris #3500MVRPHT, 26'& 33' tables, 90°tilt, hydraulic power tilt, 1960 Camera icon

Machinery Inc, Sherbrooke, QC 819-346-2369 (Email: sales@1machinery.com) Stephane Gourde

220000 lb. Aronson #G-2200, we rent also

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

220000 lb. Aronson #G-2200, 10' table Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

220000 lb. Ransome #2200-P

Kevin's Equipment Co_KEC,Inc, Spring, TX 713-694-1790 (Email: kecinc@aol.com) Layne Sailer

220000 lb. Ransome #2200P-A, 10' table, 1981 Camera icon

Mitrowski Welding Equipment, South Houston, TX 713-943-8032 (Email: sales@mitrowskiwelding.com) Matt Mitrowski

240000 lb. Aronson #HTS240VF, head/tailstock, 84" table, rail 50' travel, 2011, #25066 Camera icon

Prestige Equipment Corp, Melville, NY 631-249-5566 (Email: frank@prestigeequipment.com) Frank DiSalvo

240000 lb. Koike Aronson #HS120VF-DPD/TS120, V.S., 2007, S37370 Camera icon

Perfection Machinery Sales, Elk Grove Village, IL 847-427-3333 (Email: sales@perfectionmachinery.com) Sales Dept.

Cloos #QIROX, robotic welding positioner, 2013, #13586 Camera icon

Blumberg Machinery Co, Bannockburn, IL 847-580-6800 (Email: sales@blumbergmachinery.com) Jerry/ Ryan

Max-Pak #MP7230, 30" x 48" x 72" bale size, top mounted hydraulics, excellent Camera icon

T R Wigglesworth Machinery, Bedford, OH 440-232-6660 (Email: leads@wigglesworth.com) T. Wigglesworth

Back to category listings.

= photo available Spec Sheet icon

= spec sheet available PDF icon

= PDF available RFQ icon

= request quote from seller camera icon

= video available

= Visit dealer's equipment listing
Search Directory for Machinery & Equipment by Category:

Advanced Search

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS:WELDING POSITIONERS

WELDING MANIPULATORS, POSITIONERS & TURNING ROLLS:
WELDING POSITIONERS